2018 mustang manifold installed and tested on a F150 truck
Vložit
- čas přidán 27. 01. 2022
- I install a 18 mustang manifold on la mamalona.
I then draggy test the truck in similar conditions to see if there are any noticeable gains with the 18 mustang manifold. - Auta a dopravní prostředky
No hand smacking camera transitions gotta love it 🤌😂 and music was on point 🔥
Omg I hate when people do that, hand smacking the camera!
I love videos like these from Alex, wish he did it more often
This took a total of 4 days and it won't get 8k views
I lose time and money making videos like this. Livestreams is where I make money.
I definitely miss these videos, I love the live stuff, but these type of videos are definitely my favorite!
Projects are always harder then what they say and the time-lapse music on point 😂
This subtle style of videos editing and presenting is cool.. the music 🎶 was icing on the cake.. 👌🏻👌🏻✨✨
Great video, as always Alex!
Thanks for the great video and vetting this simple set up Alex.
The editing is definitely on point 🤣 love the music
12.4 in an N/A truck is unreal! That 111mph too 💪🏻
Nice setup! 👍🏼Looks great under the hood too!
Great video Alex. Very informative.
Keep truck content coming! Hopefully next couple videos are working towards that PBH Boost kit.
The music in the time laps made my morning 😂
Had me rolling 😂.
Looks like you ended up buzzing off the little box off the back of the Mustang manifold, is that right? Also, did you notate what size drill bits you used to create the holes for the MAP sensor and mounting screw? Did you leave the o-ring on the MAP sensor when installing and using the RTV? What RTV did you use? Just some if the finer details I had questions on as I'm doing one of these for a customer next week. Thanks for the video 🤘
3/10ths is no joke, solid video
Thanks for the truck content.
Well done, especially the video editing and music.
Alex putting in some of that elbow greese for this video! Always appreciated
Very nice improvement 👍
That PMAS looks pretty good!
The time lapse music itself made me subscribe lol love it
Great video!
What a nice birthday gift for me.
Love the content!
2 tenths..... that's amazing good going man
Makes me miss my F150. I had the ported Boss and a P1X, was shifting at 7700rpms and was so fun!
Was it a 10 speed ? If it was how’d it feel shifting
@@Johnvwilliams0 it was, a 2019 Platinum. Felt amazing, I always drove it in Sport mode.
I’m here to help Alex with the algorithm also great video !!
good video alex, big note to take from this video is coyotes need a catch can even in stock form
I put a catch can on mine and its definitely catching oil. My manifold probably is caked in oil from the previous owner. Oh well, its getting an 18 manifold soon anyway.
Love the truck content! Thanks for sharing Alex👍🏼
thank you great video love the info.
That truck is fast!!
I feel your back pain putting that manifold on, putting an Odin in there alone REALLY sucks😂😭
That music, alex you are hilarious
What year is your truck? Do you still have the factory manifold? They are on national back order and I’m in need of one.
Best NA mode I've ever experienced.
Why lockout the imrc? They work just fine. The s&b intake is the best one, it replaces the stock lower intake box. Which seems to be pretty restrictive.
All of the vacuum hoses can connect to the 18GT. It’s just not a pretty look, but it’s very functional
Do you know if tune is needed for the manifold swap?
What year is your truck? Did they recommend the intake cams swap from a GT?
That’s a considerable gain
Bad ass, 111 mph is nice!
I like the música. Échale con todo Alex
Do you still have the dyno? Any plans for more dyno content?
Good video, its amazing how at points in the video you move so fast...must be the coffee 😂
La mamalona!!!!
Will a S&B match up to the 18 manifold. I’m want to upgrade from stock manifold but I don’t want to have to buy another cold air to match up. If I put the boss I was told I would have to cut my S&B.
Kick ass!!!!👍
Glad I bought the pmas! Now I just need the 18 manifold for my Gen 2! 4mph is good shit man. Thanks for the videos
I’ve got one I can sell! It has the fuel rails, throttle body, and injectors.
@@Oreo_5oh I want it bro! Where can I contact you
Whenever my nephson figures out how to open the hood I swear I'll swap the cam on this LS in 20 mins 😤😤
Leaving a like and comment to help with the algorithm!!
AFE makes a snorkel into the airbox that is larger and smother and deletes that silencer chamber.
Now get headers just got mine going to get the boss intake should be in the 11s 2wd with sticky tires! 😈
I like it a lot
I'm gunna get a ported for my 2020 gt and take the stock mani and put it on my 19 F150 🤘🤘
I like this
Is it safe to assume that the year matches manifolds? Meaning my 2019 5.0 would be able to use a 2019 GT manifold?
I put a catch on my f150 the day I bought it .
I swapped an 18’ manifold onto my truck. All the imrc plugs at the back of the manifold seem to be plug and play but the vacuum lines weren’t long enough to reach for the brake booster so I had to rig up a hose extension and coupler for the quick release connectors to make the vacuum line longer.
The voltages are different and won't work. They sill stay closed if so it's best to lock them open.
@@YDBT4LIFE I see. So can I get that tuned?
@@samueldennis9562 if I were you I would just lock the imrc flaps open and get a tune
@@YDBT4LIFE thanks, I’ll see into that.
@@YDBT4LIFE what did you do with the plugs then since the wiring is being left unplugged?
Sorry if asked already. What year truck? I have a 2017 and I'm debating the IM.
Wonder if this would work the same with a gen 4
Where you gonna get the manifolds from?
I know I'm jumping on a little late here, but I'm thinking about this intake for my 16 F150. It only has 30k on it, but just got the "intake runner stuck open" code. My question is, does this intake cause any loss in the low end RPM range? Thanks for your video.
Get the snb air intake
There are a quite a few videos on here about the mustang manifold on f150 …. I think American trucks even has a video where they show the performance gains compared to the cobra jet and another one … hope that helps
what is the tire and wheel set up?
I'm about to put an 18 manifold on my 2016 GT here soon. Had to clean up the inside of the manifold with a dremel because there was excess epoxy inside the runners from when they sandwiched the thing together. I was going to port it, but I already requested a tune for it unported so I'll just save that idea for another day. In theory, it should move air a little more efficiently, just it can't move in more air because the TB/runner openings are untouched.
Its also cold and snowy up here so.... Its going to have to wait. If only I had a garage...
There is no tune revision or "different" tune needed for a ported vs non ported manifolds btw.
@@trunkslorenzana I've been looking into this and I've read different things. Some say a tune is needed, some say it isn't.
you don’t need a tune for a ported manifold. it’s the same tune
@@user-mt7qq4df4c interesting.
Hellava gain
What did you do for the imrc vacuum on the back of the manifold? Everything on the front fit back into place perfectly? You didn’t have to adjust any hoses or make any longer?
Nope all gets deleted
@@YDBT4LIFE I deleted my imrc on the back and capped the vacuum on the back.
I’m confused on the front side of the manifold of what I’m supposed to do with the vacuum that sticks straight out (not up and down) but just coming out. What is supposed to go there? Or does that get capped as well?
Catch cans should be standard on every car.
I miss the Mexican music in the intros for the f-150 videos!!!! No quema cuh!!!
will it pass emissions?
I did the 1320 Junkie ported truck intake manifold on my 19’ GT. It work the car up on the lower end
American muscle did 11.58 with an air intake upgrade and a 93 octane tune you’ll get a better time with 4x4 because you’ll hook up better I believe you could have gotten a better time if you were using 4x4
Is it me or does the air box lid look like a welding helmet? :)
who else is here after watching the 5 minute video from the retailer the intake, the one where they decided to skip every hard part of the installation.
Poverty star? Ik I've heard you say it before.. Lol
Haha love the musica's King Bicho
So other than a tune what else is needed to get complete the install? Also will this improve my 0-60 and just overall driving experience 🧐
I’m gonna get a local race engine shop install for me most likely but I’d like to give them everything necessary
i run a catch can on my 2018!
What catch can do you guys recommend
Upr or motion raceworks
Good morning good morning
Welder's mask intake 👨🏭
Tequila !!
Have a sudden urge for chips and salsa
Buenos nachos
Needs another intaker
This thing would probably fuck up my supercharged gmc 😅
That music 😭😭
Commented
Put it on your dyno.
11k views in 2 days
Adios
.3 that's awesome you n/a peasants 🤣
Alex you're a disappointment I thought you were going to have ported fuel rails
Low 12 sec truck on basic bolt ons. Sheesh
I just hit play. Wonder how long it’ll be before he starts bashing Biden again. 😂
LETS GO BRANDON!
No girl in the thumbnail with dubstep edits DISLIKE UNSUBSCRIBE! 😄
Damn man i did not realize coyotes had so much blow by