Turbo charger removed old/new turbo side-by-side 05 Subaru turbo XT outback
Vložit
- čas přidán 5. 05. 2023
- With a lot of work and time got the turbo out and I set them side-by-side with the new turbo so I can remove the old stuff put it on the new turbo and go from there so next I will move the catalyst up pipe and install the new cat Les up pipe, which will save the turbo long term. Then I will slowly put things back together again take my time because there’s a lot a little things you can mess up those little washers that go to the coolant and oil lines. They have to be at the right place at the right time and you cannot see what you’re doing when you’re working on it.
- Auta a dopravní prostředky
😂😂😂😂😂 it does take a while to get up now
Hi, I’m hoping you can help me, I am building a draw through turbo set up for a small block shelf in my 1 ton , and my question is where can I get a turbo with a cord down seal in it so the oil doesn’t blow into the charge, or if you could direct me to where I could get a turbo for a drive-through application thank you
I have the same car and am looking to do the same thing you're doing.. how did it turn out?
Would recommend a turbo with a multi spring wastegate, this turbo ended up having a cheap wastegate which effects high end boost. www.ebay.com/itm/276095530618?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=SeA9HrMkToG&sssrc=4429486&ssuid=Gs8nj2iwQAW&var=&widget_ver=artemis&media=COPY