Honestly channels like these are why I enjoy the retro community (specifically on CZcams) so much. I'm always discovering something new and can continue the process of dreaming. Appreciate the message at the end, sir!
@@Ex_Savior you're so welcome! And you're right, I finally may have tracked down a FW900 through my personal network. Can I ask you some questions on what to look out for? I sent you a message on Twitter :)
Nice video dude. Glad to see the setup again. it is freaking awesome. again thanks again for the D14h5u. it is an absolute dream. hope to have a setup like yours someday. hope your doing well and hope to see you again at a convention or something dude.
Oh hey, glad to hear it’s holding up well! Yeah, when things get normal again, I should be back back at conventions. Looking forward to seeing you again.
Thanks for sharing I'm just learning about retro gaming and this videos helps a lot. In my country is a little difficult to find PVMs or even a quality CRT with component but I won't surrender. Greetings!
No problem! Although PVMs and BVMs are nice, you can still get great quality content from a consumer grade CRT. We all play video games, and whatever works best for you should be good enough!
The king of the nerds. Good bang for the buck as well I'd say! Thanks for mentioning the furniture and wire shelving. I was just about to buy some 48 x 18 but I went for the 48 x 24 instead after seeing this. Better reviews and seem more study and can handle more stuff.
Thank you! Very glad I was able to help out with the wire shelving. The wire shelving unit I have has been very reliable, even with the wheels on the bottom. Apparently, each shelf can handle up to 500 lbs. I have noticed that the shelf I have my D24 and 20L5 have concaved slightly, but nothing I would be concerned about. And yes, the 48 x 24 dimension will fit a D24 perfectly.
Hey absolutely loving your channel. Do you happen to know where I can find a PDF copy of the Extron Emotia manual? I haven't been able to find it anywhere online, so now I'm asking around.
@Phatnightmares D-VHS, like W-VHS before it, it's very susceptible to changes in alignment to the read heads, moister, and RF interference. It is all due to how the data is recorded to the tape in more tightly backed magnetic lines. D-VHS is more robust than W-VHS, but not by much. The PSX maybe, due to the power supply in it being poorly shielded, messing with the reading of the tape, or the weight of it and the Turbographic ontop may be bowing the D-VHS player enough to be throwing the read head out of alignment with the tape spindles. As a former owner of D-VHS equipment, my advice is to put it on a shelf that is not near RF loud or magnetically electronics.
Ah this makes sense now. When I had the D-VHS player by itself, the TBC was working fine. It unfortunate that this happened, but so far most of my tapes still play fine. It was very tempting to stack things on top of it due to its flat surface, but going forward I’ll have to reconsider.
Hey, thanks for asking. I haven't had the time to sit down and do the appropriate research to make another video. As much as I'd love to, I'd rather release content when I'm ready. Can't make any promises, but I'll try to release something some time soon.
this is the coolest setup ive ever seen
Thank you dude. Took a while to get to this point, but I'm happy with it.
Pure awesomeness man. I'm thinking of getting a similar rack aswell for my 2 monitors
It may not look like it, but these hold up very well. Just so long as you’re not constantly moving it around, I think you’ll be fine.
Honestly channels like these are why I enjoy the retro community (specifically on CZcams) so much. I'm always discovering something new and can continue the process of dreaming. Appreciate the message at the end, sir!
Oh wow thanks! Means a lot to hear this. I don’t create content for the views, likes, or subs, but I do it to give back to the gaming community.
@@Ex_Savior you're so welcome! And you're right, I finally may have tracked down a FW900 through my personal network. Can I ask you some questions on what to look out for? I sent you a message on Twitter :)
Congratulations! This is an awesome setup!
Thank you!
This is like the retro gaming batcave
Haha I’ve never thought of my set up as such, but now that you mention it, it kind of does lol
Nice video dude. Glad to see the setup again. it is freaking awesome. again thanks again for the D14h5u. it is an absolute dream. hope to have a setup like yours someday. hope your doing well and hope to see you again at a convention or something dude.
Oh hey, glad to hear it’s holding up well! Yeah, when things get normal again, I should be back back at conventions. Looking forward to seeing you again.
saw the pic of your setup on CRT Bot2 and had to check this out, amazing stuff man
I'm glad the post had some great reactions. Thanks for checking the video out!
Thanks for sharing I'm just learning about retro gaming and this videos helps a lot. In my country is a little difficult to find PVMs or even a quality CRT with component but I won't surrender. Greetings!
No problem! Although PVMs and BVMs are nice, you can still get great quality content from a consumer grade CRT. We all play video games, and whatever works best for you should be good enough!
The king of the nerds. Good bang for the buck as well I'd say! Thanks for mentioning the furniture and wire shelving. I was just about to buy some 48 x 18 but I went for the 48 x 24 instead after seeing this. Better reviews and seem more study and can handle more stuff.
Thank you! Very glad I was able to help out with the wire shelving. The wire shelving unit I have has been very reliable, even with the wheels on the bottom. Apparently, each shelf can handle up to 500 lbs. I have noticed that the shelf I have my D24 and 20L5 have concaved slightly, but nothing I would be concerned about. And yes, the 48 x 24 dimension will fit a D24 perfectly.
Hey absolutely loving your channel. Do you happen to know where I can find a PDF copy of the Extron Emotia manual? I haven't been able to find it anywhere online, so now I'm asking around.
Thank you! Unfortunately, that is pretty hard to find. Your best bet would be to look around the SHMUPS forums or try Archive,org. Hope this helps.
Dude this is such a kick ass set up.
Hey thanks! I’m always making small tweaks here and there, but for the most part it’s pretty much complete.
That Hi-Saturn Navi is gorgeous
My pride and joy.
I had my xbox on top of my pvm aswell and it messed with the geometry and caused slight discoloration.
I’ll keep a note of this for sure. I held my PSX on top of it for a while and it seemed to be ok. But you’re right, it’s best not to take chances.
@Phatnightmares D-VHS, like W-VHS before it, it's very susceptible to changes in alignment to the read heads, moister, and RF interference. It is all due to how the data is recorded to the tape in more tightly backed magnetic lines. D-VHS is more robust than W-VHS, but not by much. The PSX maybe, due to the power supply in it being poorly shielded, messing with the reading of the tape, or the weight of it and the Turbographic ontop may be bowing the D-VHS player enough to be throwing the read head out of alignment with the tape spindles. As a former owner of D-VHS equipment, my advice is to put it on a shelf that is not near RF loud or magnetically electronics.
Ah this makes sense now. When I had the D-VHS player by itself, the TBC was working fine. It unfortunate that this happened, but so far most of my tapes still play fine. It was very tempting to stack things on top of it due to its flat surface, but going forward I’ll have to reconsider.
Love it!
Thanks dude! Hope all is well on your end.
You have mind blowing geeky collection! I think you have to get NEC PC-FX!
It’s on my radar! Maybe one day of the price is right!
Component is perfectly fine. I don’t think RGB and Component have really huge notable difference.
I say the same thing. I’m not here eyeballing every pixel for sharpness or color. My whole set up revolves around simplicity.
@@Ex_Savior extron and component is more simple than going rgb to bnc
Best regards from the poconos my dude hope your well
Hey man. Everything is going well. Hope things are good on your end!
офигеть! просто слов нет.
Daamn I would kill for a wega tv
These shouldn't be too hard to find. Best way to find one are local listings on FB or Craigslist. You can also try CRT groups on FB and Reddit.
im using the tvone C2-400 and i noticed some lag. do you notice the lag with your 2200?
Nope, I don't notice any lag on my end.
im also using extron crosspoint with all compontent for my 20L5. its just so much easier for me
Same here. I used SCART for a bit and was not a fan.
Hi, can you send me a link for the wire rack?
I don't recall which one I bought, but if you go to Amazon, type in 48 x 24 wire shelving unit. You may also want to find one that is NSF-certified.
I wouldn't dare 24/7 that monitor for my rig! I am assuming youse a wrench cuz I cannot repair jack only dream
What happened to your Sony svo-5800?
Sold it.
Sony speakers model?
Sony SS-F7000P. Note that this model has been discontinued for a few years now.
Anymore videos coming soon?
Hey, thanks for asking. I haven't had the time to sit down and do the appropriate research to make another video. As much as I'd love to, I'd rather release content when I'm ready. Can't make any promises, but I'll try to release something some time soon.
@@Ex_Savior Cool man cheers
Why are you selling your extron crosspoint?
Decided to get a cross point switcher with just RGB/Component. I don’t use RGB S/HV, so I’d rather let someone else put it to good use.
Only the best and rarest iterations of each console.
I try! I may not be big in software, but when it comes to hardware, I tend to splurge lol
@@Ex_Savior it’s beautiful. That Saturn. You could go crazier and get the pc engine LT with the fd drive.