Door trim, window buttons on front door Audi A6 (C6 4F) - ! extra bolt see description!
Vložit
- čas přidán 17. 10. 2014
- Attention! There are actually 5 bolts holding the trim! One more at the bottom of the trim.
Here's link to job description (also available in printer friendly PDF format):
www.wheelsandmotors.com/manua...
The clips are standard VW/Audi, so if broken can be bought for small money at any dealership or on eBay:
rover.ebay.com/rover/1/710-53...
To disconnect the clips, that hold trim to the door, move round bit of each clip away from the trim, so clip can come out easier, also when connecting door trim with the clips to the door, make sure that round bits are pulled away from the trim, so clips can get inside their holes.
If you are looking for new buttons/switches unit, here's the link to eBay page, that shows all results for this part (check compatibility before you buy):
rover.ebay.com/rover/1/710-53...
And if you are looking for tools to do this job, here's another link:
rover.ebay.com/rover/1/710-53... - Auta a dopravní prostředky
Bravo sir and thank you. I don't think I would have tackled this project without seeing this video. Went quickly and smoothly thanks to your guidance.
Bonus points for having the kid asleep in the back while you did it.
Man! You are the KING of audi repairer!
You are amazing man! I fixed my car easily with your video and I saved my 600TRY(100$) Thank you so much from Istanbul / Turkey.
You're very welcome Uğur 👍
Amazing guide, replaced this switch assembly myself. This video helped me so much! Thanks
My switch unit is playing up and your vid is just what I need.
Really like your vid - well-edited, very clear and even includes amusing bits ;-D
I shall certainly check out your other vids
If you're ever in the States, I owe you a few beers. My wife's 2006 A6 Quattro 3.2 runs like it just left the showroom, thanks in no small part to your videos and tips.
Thanks man :)
This is a great video. Thank you for posting. Look forward to more work and videos on A6C6.
Thanks :)
Thank you for your videos! Your son has been growing up so big since you changed the circuit board on central console!
Thanks Daniel, in this video there was my daughter that's 5 years older than my son :))
This Video and the Park Control Replacement video were VERRY HELPFUL. THANK YOU!
You're very welcome :)
Love your random location choices👍
Subscribed
Thanks Mr Rambo :)
Thank you again for your great videos.
life saver you are. most appreciative of the detailed instructions for your car.
You're welcome :)
Thanks a lot for your very clear and good video !!!!! I will need it quite soon :-)
Thank you very much dear friend. I´ve just put a new door switch in my A6 with this amazing and perfect DIY.
Good job and many thank to share your knowledge.
Regards form Bilbao
Hey mate you just saved me close to $300.your video is so exceptional.thanks mate
You're very welcome Robin :)
Perfect video. Greetings from Germany 👍🏼🙂
Bitte sehr! Not so perfect though, I forgot one screw - please check the description.
@@wawayltd I know you forgot a screw, the black screw below! But I watched the video for another reason. I just wanted to know how the clips are attached to remove the door panel again, you have to pull the clips a bit so that they go back in the groove. For me it was a perfectly helpful video. Unfortunately, a wise clip attachment broke off for me...
Sir You Give Such Great Service!
Thank You! :)
Nice one cheers.
I have to get to the speaker on the passenger side front, I have tried once before but wasnt sure after i removed the 4 bolt & i didnt want to break the panel.
Very good web site .
King of audi
Thanks 👑
ahmed a4 oui le meilleur king de Audi 👍🏻👍🏻👍🏻👍🏻👍🏻
thank you for you're help.
great video ! thx
Thank you :)
+Daniel Wass For some reason CZcams doesn't allow me to answer to your comment. The buttons could be the same, but wiring definitely different, also ECU will need to be re-programmed.
Thank so nicely explained, merci beaucoup.
you have no led under the wood panel?
I have problem with that
Are there any connections on the other side for that led?
i do have an allured 3.0 tdi on a 56 plate , i was wondering if its possible to upgrade to newer wing mirror with a turn signal, do you think the wiring is the same ?? thanks
omg! thanks so much! was about to figure it out for myself on weekend - and now this vid.
btw u can by those switches on aliexpress cheaply, i mean really cheap like 10$ instead of VAG 60$
Thanks, but it's a bit too late now.. I live in UK, first called Audi dealership to find out the price - 48.something GBP, then had a look on eBay - couldn't find anything reasonable, and, because of type of my business (taxi - can't stop) went for safe option. Never heard of aliexpress before, thanks for telling me, will have a look :)
Great video!!!
Thank you 🤓👍
great video, thanks👋
You're welcome
Thanks for all the videos . You saved me with the heater blower motor instructions. Now I have a new problem and it's the drivers window cable has frayed and broken . no one has done the a6 c6 window regulator repair on you tube . My problem is removing the glass .
I don't have that car for about 4 years, so can't make any new videos with it. Normally to remove glass from catches, you should loosen nuts there. I had to do that on Seat other day, because it's all VAG I hope Audi is similar.
Thanks so much !
You're very welcome :)
Thank you.
Hello. You are great. I was able to replace switch. How to replace electronic control module for right headlight. I’ve replaced bulb ,igniter , ballast but nothing has worked. I would have to remove glove box correct? What is the name of the part I would need?
Thanks! Unfortunately, I don't have that car for about 5 years. Also I had halogen bulbs, not xenons, I'm afraid I won't be able to help you. I know couple of websites that list part numbers:
www.oemepc.com/
And this one:
www.lllparts.co.uk/en/
And if you're looking for technical info on Audi, here's manufacturers website for manuals:
erwin.audi.com/erwin/showHome.do
On my A6 2005 plate there are 2 switches on the inside of the door just down from the locking mechanism and above the red light that comes on when door is open..you can see them on the video of you removing door card,I'm just curious what they are for,
I think it's something to do with alarm settings.. I'm curious now as well. I'll have a look in manual, when I'll get home.
manny thanks again
You're very welcome, but please mind - there is another screw that I didn't show in the video, check video description.
Recently I did replace fuel rail line pipe (as the old one was damaged) . The new pipe did fit but it did not make the click sound. I ordered it from ebay. Is there any risk that it will get removed automatically . is there a fuel pressure in that ?
Sorry, Vishal, I don't have any experience with fuel rail yet...
Hey thx so much!!!!!
No worries 👍 But please mind - I made a mistake in the video and didn't show 5th bolt! Please check description or my website.
After you complete this do you have to reprogram the windows?
No. It's just a switch - plug and play.
Hi
Water got into the car. And since then the left electric seat has stopped working.
What do you suggest?
Sorry, I don't have experience with electric seats...
Happy New year 🍾
How can you set the remote to open windows. My 2006 key in door will lower windows but unlock button remote doesn’t. Is there a way to program?
Not sure how to program that if it doesn't work. On vags to open windows normally you need to press and hold unlock button. But automatic window winding should be on as well. You know like when you disconnect battery for some reason and your windows get glitchy - they don't close automatically, you have to keep your finger on a button, in that case remote option to operate windows also won't work.
I am having rough idle on this car along with sluggish performance. Any ideas? Replaced all filters so far but no significant result.
Sorry Awais, it could be anything, it needs to be diagnosed.
MUCHAS GRACIAS.. THANK YOU VERY MUCH..
You're welcome 👍
thank you for the video, question please, if the window goes down but not up, when click to move it up, the motor seems stuck and stop, if i remove the motor and move it up and down freely, it will move no problem, could be regulator?
I know these windows are sensitive to resistance - if something gets in the way they go back. Perhaps it could be misaligned window glass. I can't make a new video -I don't have that car anymore, but recently I had to replace window motor for Seat and had to fiddle a bit to get it straight. By the way - does it open and close with remote key (press and hold)?
@@wawayltd Thank you for the reply. yes, it goes down no problem, but up the motor tries then it just stops, if i remove the motor, it will go up no problem by it self, but once i put it back, it will stop going up.
is it necessary to put your window down, and if, why is that? i need to get to the door lock mechanism. It does not open the door lock from remote...
With window down there's easier access to door trim. Did you try to replace battery or re-program your remote key?
Hello sir i have a Audi A6 2005 and my behind window is not working i hear the tek but the window is not moving do you know what,s the problem?
Hello :) Does it not react to all buttons or just its own? If it doesn't open with any means, I believe, there must be a problem with that electric motor.
I'm trying to buy a manual for the car but having no luck so far.
what are the 2 switches for above the door light ?
I don't have that car anymore... What light are we talking about? Above the door? You mean sealing?
My 2007 A6 had a screw in the bottom center of the door panel as well
My A6 also had it! I didn't mention it in the video, I didn't know. Later, when I discovered it, instead of re-filming it, I put it in the description under video and on the website. My bad..
Hello,do you have any video how to replace the back door panel?Thanks so much
satkunas1 sorry my friend, that car is gone now can't make any more videos about it...
WheelsAndMotors Why did you sell it? I have exactly the same A6 from 2008 and a lot of problems... :/
Mine was 2005, it has done 409.000 miles, and could not be used as a taxi anymore because of licensing age limitations...
Hey!
Since I replaced my switches the driver door does not unlock with central lock system anymore. It locks, but it does not unlock.
I put in the original switches again, but the problem persists.
Can anybody help?
Maybe you've damaged some connection to that lock? Don't know, sorry..
Hi there! My AUDI dashboard says Telephone Not Installed. Any ideas? I checked under passenger seat and is no module or unplug connector..To be under the driver seat? / rug... Thanks
Maybe it's because telephone is actually not installed? 😉
Or was it working before?
@@wawayltd I don't know if the car have bluetooth installed so I need to check with VAG? Can be under the driver seat? The car is Right hand drive...
@@DjTavy I believe you are same person that emailed via website... Unfortunately, I'm not the best guy to help you with this one. I had same set-up with that Audi in the video. I had button for phone, but it was also "not installed". I didn't try to do anything about it, also I don't have that car for over 4 years..
Sorry, I have no clue how to install it..
I figured that out. But can’t figure out how to get screw back under handle because it is so deep. I guess I need a better magnet type screwdriver to get it in. The little speaker cable broke on me though. But other than that video was so helpful
Just use longer screwdriver on that one... I know they say size doesn't matter.. 😉
Hello I see u know about audi cars I have a 07 A8L....my driver side power seat stop working. .can u please help
Hi, I don't have power seats in mine, I don't have experience with power seats yet, sorry... I would try to find the fuse for it, then check connections and motor itself..
OK thanks
my car is the same engine same year and got 5 bolts, whell now it has 4😃
hello!! GREAT VIDEO.
I also have a A6 2005 and my MMI display does this >>> 2005 Audi A6 MMI problem?
Please watch the video and give me some advice on the comment section or on here.
What are the sizes of the bolts to do this ?
I think types can vary. It could be either cross-head or torx.
+WheelsAndMotors it is done ..... Not to difficult .... Took me an hour, but if I did it again .... 30mins.
The tricky bits were my clips which divided the wrong way so that when the doorcard from the door, I had to then go and separate the opposite clip part from the door. This process actually cost a clip at the bottom..... But as me wheel and motors says it's not a great loss.
Cars are actually easy, once you start getting closer to them :).. And have tools
+WheelsAndMotors yes.... I went and got a torq socket set ..and other bits and just got on with it . So far I have done the door ... The third brake light on my avant ....next ... Bumper off for fixing parking sensors ....
there actually is another bolt on thebottom under that ,,empty box,, I broke my one😏 anyway my door wont open from central lock for some reason every other door opens, but it does lock normal when precced central lock on keys. Any idea why this happen? I took that pannel off but could not get inside lock actuator. thanks in advence
+Silky Smooth Sorry about your bolt. :( I wonder why do you have extra bolt.. Where was it anyway? Are you and your car in UK or US? Regarding central locking - it looks to me that there is a problem with the locking switch. It should be easy to replace. From inside door panel unplug connector, release clips, and push it out. Sorry, I can't make a video, because I don't have that car anymore :( But you know how to get inside there from this video
+Silky Smooth Oh I see, (Should read properly :)) ) Under door pocket..
+Silky Smooth I have just looked through the video again. Shame! There is another bolt at the bottom - it looks that my 5th was broken before, too. Look at 3:57 - there's obviously a bolt! I'm going to update description... Thanks for pointing on that!
+WheelsAndMotors hi, I am just down the road😉, UK m8. I think I need to get much deeper then just panel as that white plastic actuator is lockated deep inside and me thinks needs stripping the whole door. I deffo wont be doing that. Its just annoing I need to use keys to open my door nothing major. It seems lots of other people are having the same issues. About the bolt not to worry the pannel its on its place, got little sound when driveing on bumps but again nothing major. maybe I will change whole door if I come across somewere. thanks for the video
+Silky Smooth Do you think it's actuator? If locking/unlocking door works from the key, I would think it's just a switch. Hang on, I'll make a screenshot and show you what I mean...
Barvo pour vous 👍🏻 et votre femmes 👍🏻👍🏻👍🏻
No not on ceiling just above the red light on the inside of door.
Is there a switch for that?
i wish i saw your Chanel early, but how do you know its the button, its not the motor in the door not working
On VW/Audi cars you can open and close all your windows by pressing and holding 'lock' or 'unlock' buttons on your remote key. This is how you can check if motor is working.
WheelsAndMotors It's not enabled by default on the US models. You have to either have the dealer enable it or use VAG-COM to turn it on.
Justin Cervero That's strange.. Why would they do that?
2 minutes and 45 seconds in on you're video
Hi, if you still have "Owners Manual" with your car - page 61, if not - one of the buttons to deactivate interior monitor alarm (it's off when lit up), for example if you leave you pet inside it can move inside the car without activating alarm. The other button is tow-away protection. You can deactivate it if the car is on recovery truck or ferry etc.
Your pants zipper is undone!
Don't work at rainy day
It's always rainy in England :)
Z
+poosnip Zorro? :)
+WheelsAndMotors slip of the finger!!!!