Might I suggest to turn the music down after the introduction also In some of the videos the music is so loud you can’t be heard, maybe do some episodes with other people that will help bring in new people
I have a 2001 Dakota slt quad cab. It is 2wd, 4.7l v-8, 45rfe automatic transmission. All the options. I love the truck. That being said, it does have problems. I got 358,000 miles on it with regular maintenance. It dropped a valve seat and I found it cheaper to rebuild the engine with the updated HO heads, pistons, and cams. The drivers seat bottom has had several replacements. No OEM parts available. It still has original transmission, but has started making a crunching noise in reverse engagement. Needs a heater core and had to be repainted after factory paint "fell off". I have rebuilt the control arms in the front end 4 times and it doesn't like to hold alignment. The bolts tend to loosen. I changed the front coil springs to the manual transmission option ones that had a higher load capacity. The brakes were much better than my gen 1, but still barely adequate. I installed a '03 Durango dual piston caliper front knuckle with huge rotors and an '04 Dakota rear disc brake axle with post-track 3.55 gear. The brakes are now amazing and super easy to do with minimal to no changes to the original brake system. I changed the TCM to a grand Cherokee 545 RFE to give me the extra gear. Some roads in AZ are 75mph. It does about 1800-2000rpms at that speed. have stainless street headers to magna flow cats and flow master dual exhaust. It still has the original fuel pump. I installed chevy Saturn 12 hole fuel injectors for a nice power gain and increased mileage (Kudos to Martinbuilt). The other issue is the window regulators have had to be replaced 4 times now. The TYC brand seem to be holding up well and have a lifetime warranty. It also seems to eat cam and crank sensors from Autozone (25 replacements). The OEM ones work great. I still carry a spare of each. Just recently gave it a Superchips tune and it really woke up. It gives Mustangs a good run.
I'm not as big of a fan of the 3rd gen's, but I love the first & second gen trucks. The aftermarket support is a lot stronger for the second gen trucks compared to the third gen's. There seems to be a lot of us Mustang guys who also own Dakota's. I have a 1996 Cobra & a 1994 Dakota SLT V8 4X4 with the 5 speed manual.
I have a 06 Dakota that looks just like that one. We have been trouble shooting it for about $2000 so far. It started not wanting to shift into O/D. So we have had the transmission fluid and filter changed it all looked good, changed the shift selenoid, tune -up, new battery,transmission shift sensor, mass air flow sensor, throttle position sensor then finally the computer. Still idles high if you don’t let it idle down then it doesn’t shift Correctly.
Considering a '08 with less than 90k at the moment, so your info is most appreciated. For me it would be a good compromise between carrying people if need be, or carrying stuff if that should arise.👍
I have a 4 door like yours with dual exhaust coming up on 230k and its been a great truck. With the V8 its quick and can tow over 7k pounds. Im hard on the truck too.
Definitely agree with the lack of aftermarket parts. I have an ‘05 3.7 with a manual transmission and I’ve been wanting to modify certain things but haven’t found good sources for parts. Especially HD bumpers
@@hyrt.the.rapper I’ve heard the same about the Move bumpers. Only thing I’ve been taking into consideration is that the added weight will definitely do a number on the already crappy fuel economy lol
Yeah he said 20mpg I laughed my ass off I have the v6 too, and I will never get 20mpg, I actually think the V8 might gett better gas mileage. But I would rather have a meaner looking truck and pay the price for it.
Here's the worst. The bed is too narrow to fit a sheet of plywood flat between the wheel wells. It's about 2 inches too narrow. STUPID CALL, DODGE!!!!!
07' with 240000 miles, still running strong 4.7L. Upper control arms replaced every 2 yrs. Lifted it 2" , removed after 1 week.
I leveled that Dakota with a 1.5in spacer and I also removed it after about a week.
Might I suggest to turn the music down after the introduction also In some of the videos the music is so loud you can’t be heard, maybe do some episodes with other people that will help bring in new people
Thank you I appreciate it! The music is turned way down but I suppose not enough. Don’t know till someone mentions it!
I have a 2001 Dakota slt quad cab. It is 2wd, 4.7l v-8, 45rfe automatic transmission. All the options. I love the truck. That being said, it does have problems. I got 358,000 miles on it with regular maintenance. It dropped a valve seat and I found it cheaper to rebuild the engine with the updated HO heads, pistons, and cams. The drivers seat bottom has had several replacements. No OEM parts available. It still has original transmission, but has started making a crunching noise in reverse engagement. Needs a heater core and had to be repainted after factory paint "fell off". I have rebuilt the control arms in the front end 4 times and it doesn't like to hold alignment. The bolts tend to loosen. I changed the front coil springs to the manual transmission option ones that had a higher load capacity. The brakes were much better than my gen 1, but still barely adequate. I installed a '03 Durango dual piston caliper front knuckle with huge rotors and an '04 Dakota rear disc brake axle with post-track 3.55 gear. The brakes are now amazing and super easy to do with minimal to no changes to the original brake system. I changed the TCM to a grand Cherokee 545 RFE to give me the extra gear. Some roads in AZ are 75mph. It does about 1800-2000rpms at that speed. have stainless street headers to magna flow cats and flow master dual exhaust. It still has the original fuel pump. I installed chevy Saturn 12 hole fuel injectors for a nice power gain and increased mileage (Kudos to Martinbuilt). The other issue is the window regulators have had to be replaced 4 times now. The TYC brand seem to be holding up well and have a lifetime warranty. It also seems to eat cam and crank sensors from Autozone (25 replacements). The OEM ones work great. I still carry a spare of each. Just recently gave it a Superchips tune and it really woke up. It gives Mustangs a good run.
I'm not as big of a fan of the 3rd gen's, but I love the first & second gen trucks. The aftermarket support is a lot stronger for the second gen trucks compared to the third gen's.
There seems to be a lot of us Mustang guys who also own Dakota's. I have a 1996 Cobra & a 1994 Dakota SLT V8 4X4 with the 5 speed manual.
That’s totally fair! Right on, that’s awesome!
I have a 06 Dakota that looks just like that one. We have been trouble shooting it for about $2000 so far. It started not wanting to shift into O/D. So we have had the transmission fluid and filter changed it all looked good, changed the shift selenoid, tune -up, new battery,transmission shift sensor, mass air flow sensor, throttle position sensor then finally the computer. Still idles high if you don’t let it idle down then it doesn’t shift
Correctly.
Burnt clutches. $2k rebuilt
Considering a '08 with less than 90k at the moment, so your info is most appreciated. For me it would be a good compromise between carrying people if need be, or carrying stuff if that should arise.👍
Good points to consider about dakota. I love my 2005, 4x2, 4.7 lts.
I have a 4 door like yours with dual exhaust coming up on 230k and its been a great truck. With the V8 its quick and can tow over 7k pounds. Im hard on the truck too.
Definitely agree with the lack of aftermarket parts. I have an ‘05 3.7 with a manual transmission and I’ve been wanting to modify certain things but haven’t found good sources for parts. Especially HD bumpers
Move bumpers and I think Iron Bull bumpers makes some decent ones, although I have heard that the move bumpers have paint pealing issues.
@@hyrt.the.rapper I’ve heard the same about the Move bumpers. Only thing I’ve been taking into consideration is that the added weight will definitely do a number on the already crappy fuel economy lol
Yeah he said 20mpg I laughed my ass off I have the v6 too, and I will never get 20mpg, I actually think the V8 might gett better gas mileage. But I would rather have a meaner looking truck and pay the price for it.
@@hyrt.the.rapper 100%
The Chevy Colorado you could get a 5.3 v8 and it came with four doors lol
Here's the worst. The bed is too narrow to fit a sheet of plywood flat between the wheel wells. It's about 2 inches too narrow. STUPID CALL, DODGE!!!!!
What musics playing in the background ?
My 07 4.7 towed my 3/4ton 40 miles home bout 7500 trailer an all did fine with break control just slow
Where did you find your camper shell I've been looking for one for ever
The seat will lower if you push down on the seat adjuster. I have the same truck.
My neighbor has an older V8 model with nearly 500,000 miles on it.
Dang! Impressive
Sick vid, 😂 had me laughing
That is not a garage?? Extra misplaced episode
For one you got the worst one 😂😂😂😂
I have an 06 slt 3.7v6 with 145k miles and I have had zero mechanical issues and I can see perfectly with the seats