That wasn't really what I wanted to hear lol. Sorry it didn't work out. You getting another one or something else? My weird looking JTS Artisan Neo in .177 will be here Tuesday afternoon. It's built for JTS by Xisico best I can tell and has the XS25 action under the Tac stock. Little worried, .177's generally have less barrel issues I think. Seems like it's always a .22 caliber's I'm hearing issues with, Although I do have a .177 Walther Terrus I suspect has a barrel issue. Will have to check it again someday. I may buy a Diana 34 and drop it in the Neo stock if nothing else, if I like the stock.
I pined your comment in attempt to have my message come through to you, because this is the third time of me responding. CZcams has greatly blocked my communication ability. When people respond to me from other videos I rarely hear back, unless I go straight to their video. I'm planning on a another try through Flying Dragon Air Rifles. Have a great New Year! 🎊🎉😃👍
I think I may have said before, my hw80 is very pellet fussy. The choke is the same, at the last inch of barrel and it prefers the longer bodied ammo . Get it right and its pin point accuracy but put the wrong ones through and you may as well throw a handful of gravel at the target lol
Hey Chuck thanks for tips sure to save time and money trying to find the "right" pellet! I sincerely hope yourself and family had a Blessed and Merry Christmas! Have a Fantastic New Year!!! Look forward to more content in the new year! God Bless and Take Care man!!!
Thank you so much John. 😃👍 Christmas ✝️🎄😃 was great and prayerfully 2024 will turn around. But if not, I know that God is in control. I hope that you had a great Christmas and will have a very good New Year! 🥳🎉😃👍
My impression of Xisico and 'BAM' rifles is the quality can vary so they are a bit 'luck of the draw'. I've heard them described as Chinese junk which I think is unfair, they can be good value and make good utility or project guns to work on or add camo to etc
Most people get very opinionated when they get a lemon. 🍋 When I got my Hatsan 95 22, the barrel was bad, but I wanted to try again because I have seen in other videos, that proved extremely good accuracy. When I got my next Hatsan 95, it was extremely good with accuracy. I know that the XS25 can be a very good rifle. Happy New Year! 🎊🎉😃👍
I never heard anything about Walther barrels being used. I'm pretty sure they are all China made. I liked everything about the XS25, except the barrel.
I'm not sure, they said they (Pyramid Air) were out, but I looked and it showed a nother one in stock. The trigger is really good and I think that it could be a really good rifle, long as it has a good barrel. I would really like to get one in wood, but I haven't seen any. It's the same as the Ruger Black Hawk or Ruger Air Hawk, but in 22, and it depends who is selling it.
Hi chuck , I recently got a Diana 350 magnum , right in the beginning I realized all the pellets I put in this rifle wouldn’t fit correctly inside the breech opening , they feel kind of loose , like the .22 cal pellet in too small for the barrel, do you know by any chance where I could buy a barrel , thank you
I really don't know, but if you haven't had it very long, then send it back and ask for a nother one. For what a new 350 cost, the barrel should be near perfect.
That wasn't really what I wanted to hear lol. Sorry it didn't work out. You getting another one or something else? My weird looking JTS Artisan Neo in .177 will be here Tuesday afternoon. It's built for JTS by Xisico best I can tell and has the XS25 action under the Tac stock. Little worried, .177's generally have less barrel issues I think. Seems like it's always a .22 caliber's I'm hearing issues with, Although I do have a .177 Walther Terrus I suspect has a barrel issue. Will have to check it again someday. I may buy a Diana 34 and drop it in the Neo stock if nothing else, if I like the stock.
I pined your comment in attempt to have my message come through to you, because this is the third time of me responding. CZcams has greatly blocked my communication ability. When people respond to me from other videos I rarely hear back, unless I go straight to their video.
I'm planning on a another try through Flying Dragon Air Rifles.
Have a great New Year! 🎊🎉😃👍
Holy crow! Pellet free fall? Never heard of it before this video. Thanks for the tip. And good thumbnail. It really got my attention.
In his old video’s you also find this method of checking the barrel 😉
Thank you Jace. 🙂👍 I think any rifle that is extremely pellet fussy needs this test done.
Happy New Year Jace! 🎊🎉😃👍
@@Relaxbadkneeadventures Thank you for reminding me to put a link for that video. 😃👍
@@springpistonriflefeverlone9611 Happy New Year
Hope you get it sorted Chuck. Happy New Year to you and your family. Take care.
Thank you Paul. 🙂👍 Hopefully I can get a good replacement. I like how it functions, but it needs a better barrel.
I think I may have said before, my hw80 is very pellet fussy. The choke is the same, at the last inch of barrel and it prefers the longer bodied ammo . Get it right and its pin point accuracy but put the wrong ones through and you may as well throw a handful of gravel at the target lol
The 80 is a great rifle. Wish Weihrauch would inspect all of their barrels better, especially for the cost.
Happy New Year! 🎊😃👍
Hey Chuck thanks for tips sure to save time and money trying to find the "right" pellet! I sincerely hope yourself and family had a Blessed and Merry Christmas! Have a Fantastic New Year!!! Look forward to more content in the new year! God Bless and Take Care man!!!
Thank you so much John. 😃👍 Christmas ✝️🎄😃 was great and prayerfully 2024 will turn around. But if not, I know that God is in control. I hope that you had a great Christmas and will have a very good New Year! 🥳🎉😃👍
❤❤❤❤❤❤👍👍
Happy New Year 🎊🎉😃👍
My impression of Xisico and 'BAM' rifles is the quality can vary so they are a bit 'luck of the draw'. I've heard them described as Chinese junk which I think is unfair, they can be good value and make good utility or project guns to work on or add camo to etc
Most people get very opinionated when they get a lemon. 🍋 When I got my Hatsan 95 22, the barrel was bad, but I wanted to try again because I have seen in other videos, that proved extremely good accuracy. When I got my next Hatsan 95, it was extremely good with accuracy. I know that the XS25 can be a very good rifle.
Happy New Year! 🎊🎉😃👍
Just a TIGHT FITTING PULL THROUGH RAG will indicate the same condition of the barrel. No need by pellet testing.
You're fully wrong Bubbah.
My xs28 i always thought was weird because its tight all the way through the barrel i guess Luther barrels are not as great as everyone says sad
I never heard anything about Walther barrels being used. I'm pretty sure they are all China made. I liked everything about the XS25, except the barrel.
@@springpistonriflefeverlone9611 there's a place called flying dragons the ones they get have those barrels and I guess there own
@@SteveSiwak-sv8sdI will plan on doing business with him next time. I wish he had the XS28 and the XS25 in wood.
Happy New Year! 🎊🎉😃👍
Are you going to get a replacement xisico or just returning it?
I'm not sure, they said they (Pyramid Air) were out, but I looked and it showed a nother one in stock. The trigger is really good and I think that it could be a really good rifle, long as it has a good barrel. I would really like to get one in wood, but I haven't seen any. It's the same as the Ruger Black Hawk or Ruger Air Hawk, but in 22, and it depends who is selling it.
That's a shame buddy
I have an older 177 airhawk and its a decent rifle
@@SteveSiwak-sv8sd Yes
@@WalnutandSteelI like the wood stock and the trigger.
Hi chuck , I recently got a Diana 350 magnum , right in the beginning I realized all the pellets I put in this rifle wouldn’t fit correctly inside the breech opening , they feel kind of loose , like the .22 cal pellet in too small for the barrel, do you know by any chance where I could buy a barrel , thank you
I really don't know, but if you haven't had it very long, then send it back and ask for a nother one.
For what a new 350 cost, the barrel should be near perfect.
@@springpistonriflefeverlone9611 can’t return it , I will keep looking I’m sure I will find one for sale , thank you 🙏
Now you gone and dun it! I'm now forced to spend time pushing pellets thru barrels for eternity. I hate y... Hahah. Jk. Thanks
Lol😂👍. I would not worry about any that are already accurate.