HOW TO CHANGE WHEELS AND TIRES FOR SXS - TRAIL TALK EP. 25 | POLARIS OFF-ROAD VEHICLES

Sdílet
Vložit
  • čas přidán 28. 08. 2024
  • POLARIS TRAIL TALK
    This week, on Episode 25, we change wheels... the right way! We also cover why we're going back to stock with our GENERAL build!
    POLARIS STUFF
    Instagram - / polarisorv
    Facebook - / polarisorv
    Website - offroad.polari...
    Newsletter - offroad.polari...
    OTHER RESOURCES
    Rider Safety - offroad.polari...
    Polaris Owners Manuals - www.polaris.co...
    Polaris Podcast - podcasts.apple...

Komentáře • 12

  • @markclark9793
    @markclark9793 Před 2 lety +2

    That extension on the torque wrench will vary how you apply the torque - get rid of it; if possible.

  • @drexhawken8567
    @drexhawken8567 Před 2 lety +1

    Polaris wheels are sexy! I don’t know if you could pick a better wheel. I’m running bf Goodrich km3 for summer/ fall

  • @paulfilardi7046
    @paulfilardi7046 Před 2 lety +4

    If you’re going to use a torque wrench incorrectly why are use it at all. The click is the torque doing an extra only increases the value. Either use the tool correctly don’t waste the time using it at all.

    • @WmFiske
      @WmFiske Před 2 lety

      I have to agree with Paul. Stop at the first click, you’re at 120. From the Tekton manual for that 1/2 Inch Drive Click Torque Wrench (25-250 ft.-lb.): “… At the instant the wrench clicks, torque setting has been reached. Stop pulling wrench and release pressure on handle. Do not continue to pull after torque setting is reached. Doing so will overtighten the nut/bolt…”. You take the time to explain a lot, this would have been a good point to add to the viewer.

    • @WmFiske
      @WmFiske Před 2 lety +1

      @MTB NORTH Good to know. Thanks for the info

    • @brandonconway2007
      @brandonconway2007 Před 2 lety +1

      What brand is a good torque wrench? Every review I read seems like they all are bad. Everyone complains.

  • @kobrien6657
    @kobrien6657 Před 2 lety

    Hey Polaris, is there a reason that your 4x4 quads don't fit inside the bed of a standard pick up truck (6.5')??

    • @SuperNrGEE
      @SuperNrGEE Před 2 lety +1

      My 570 fit perfectly in my 01' Ram. Even closed the tailgate.

    • @kobrien6657
      @kobrien6657 Před 2 lety

      @@SuperNrGEE Maybe its the front and rear hitch receivers that are not allowing it to close. But I need those on the bike as its my workhorse, oh well, compromises🤷.

    • @SuperNrGEE
      @SuperNrGEE Před 2 lety +1

      @@kobrien6657 I only had a rear hitch on mine but that could be the reason then.

  • @MrTheguywiththemoney
    @MrTheguywiththemoney Před 2 lety

    If you need a video to change wheels and tires... you probably shouldn't be off-road

    • @eschenn1
      @eschenn1 Před 2 lety +2

      Plenty of people new to off roading! Better off giving free information to learn 🤘🏼