Top DeWALT 20V Accessories NOT Made by DeWALT!
Vložit
- čas přidán 27. 08. 2024
- Top DeWALT 20V Accessories NOT Made by DeWALT!
Links*
Power Wheel Adapter: amzn.to/3F3Cuxs
Gooseneck Light: amzn.to/3MSeGyg
Dual Power Worklight: amzn.to/3CW4K2g
Ryobi Like Fan: amzn.to/3TmsyDf
Fan w/Remote: amzn.to/3sf1OZx
USB Adapter w/Light: amzn.to/3z3u2dv
Single Battery Inverter: amzn.to/3F17kGM
Dual Battery Inverter: amzn.to/3Dsy8yJ
Quad Battery Inverter: amzn.to/3TmkYc0
Glue gun: amzn.to/3F1fHlA
Klein Power Tools: amzn.to/3VP0bPN
Electronic Load Kit: etsy.me/3eZazDU
Soldering Iron: etsy.me/3N7nxMR
She's Got the: bit.ly/3Shzbpa
Support the deals! Become a Channel Member for as little as $1/month!
/ @denoftools
For Stickers, t-shirts, and more: www.denoftools...
Check us out on IG, FB, & TikTok: linktr.ee/deno...
Sorry, we don't talk about how we do "The Bear".
Email: DoT@red-beard.com (Business Questions Only)
Mailing Address? This part is tricky. We bounce back and forth between Montana and Las Vegas. Please contact us to make sure where we will be.
Montana: PO BOX 76, Livingston, MT 59047
Nevada: 2251 N Rampart BLVD, Suite 177, Las Vegas, NV 89128
*Just assume all links are affiliate links. They can be to Amazon, Walmart, or any of a dozen other links.
100% Transparency Guarantee. It is our pledge to be as open as possible and always let you know of any relationship we have with any seller or manufacturer. If a company has paid to sponsor a video we will tell you it's a sponsored video. If a company has provided free products for review we will tell you the product was provided for free. If a company pays for us to travel to an event we will disclose that as well. At the end of the day, we believe that we can and will always give you an honest review but we also understand that unless you have all the details there can't be real trust in our community and we always put our community first!
The hanging fan has a light too. That would be awesome for soldering. Blowing the fumes away and helping you see better.
Just a warning, I believe Dewalts low voltage cut off is in the tool,so if these accessories do not have it built in them you can trash your batteries.
I was thinking the same thing. Good video idea but you really should pull this until you add a disclaimer at the beginning about using these at your own risk since they are not authorized by dewalt. It should be obvious but you know how people are.
I know thet the usb adapter with the light have low voltage protection.
I came here to add this comment. you beat me to it. Good job 😁
Just boost the dead battery with a hood battery for a minute and then it will come back. Lots of videos on that on YT. Don’t toss them.
@@normferguson2769 yeah it's on YT, so it must be safe and the right way to do it. If your phone get wet just toss it in the microwave, that's on YT also. If you want to attach your $50+ battery into a $12 tool and then jump start the battery so you can charge it go for it. Believe it or not it's a safety issue not a battery selling gimmick as to why they won't charge
Need the same for Milwaukee please!
Best thing not here is the Graco TC Pro Cordless Airless Paint Sprayer
Any glue gun can be cordless for a few minutes after you get it up to temp.
You forgot the cordless Graco airless paint sprayer!
The gooseneck light already exists. However it’s for the old 18v battery.
Great stuff. I didn't realize how many off brand compatible accessories there were.
Make sure you remove the batteries from the inverters as soon as you are done using it. Even the DeWalt USB adapter is constant draw while the battery is on it.
People are starting to build their own ebikes using Dewalt batteries just like others before them did with the DIY Powerwheels. Ebikes are already outselling electric and hybrid cars. This could actually outsell the power tool market if ebikes move to these batteries. One upside is that you can buy batteries/chargers at any Home Depot, many miles from home or a bike shop.
How about doing the same idea for Ryobi batteries.
These manufacturers need to focus their energy into making metal detectors .
I bought the dewalt knock-off batteries on Amazon and surprisingly they work great, cost about $30 each for 5Ah batts, and they cost a frack of Dewalt batteries!
Someone needs to make a portable winch that runs on flexvolt batteries.
I have the fan and it is incredible. I use it every day. The USB charging works excellent. I also have the glue gun it works very well.
i seen a tool adapter for 220 and 110 vac for all Tool Dewalt Milwaukee and makita
When you dont want use batteries or wait to charge
Dewalt sells a couple fan options but they are $100. My friend got her Ryobi one for $30. So I went on Amazon and picked up 2 of those fans for half the price of one Dewalt. We use it all the time at my daughters water polo games because it’s notoriously hot here in Texas. I need to look at that hot glue gun.
Need this for Ridgid please.
Great video, thanks!
Just so everyone knows... That 'Electronic Load Kit' does NOT include the digital readout/panel/control knob. It's just a 3d-printed box, a pair of wires, the connector lugs, and a pair of metal tabs you have to manually jam into the contacts on the battery each time you change the battery. That's it, that's all there is.
Now I want to get an electric train horn kit from HF and mix it with the power wheel adapter 😂😂😂
will you please make the Milwaukee battery video along the same line as this video?
Hey 🐻 How are you? First of all I'm pretty new to the channel ( about a month or so) and I have to say I Love It !! I've learned more in the past month about tools then I can tell you ...Thank You for such a awesome channel !!!
I have a question for you or Any Ryobi cordless guys or gals out there...Does anyone else have issues with there 18 volt ⚡️ battery that run just about all of there tools? 🤔 These damn batteries keep dying on me and then they won't recharge! In 2020 I went out and bought a 5 pack of new Batteries and and got a new charger with one of there many cordless tools they have and I don't use them a whole lot, mostly in the warmer months...I went to charge them earlier this spring and sure enough only ONE out of the Five will recharge !! Im so pissed I believe I'm done with Ryobi all together...I can't imagine what if anything I'm doing wrong on my end honestly...so I have Seven batteries & 3 chargers and only two will charge...one is actually one of the originals that I've had for years 4 or 5 aprox and the other is one of the 5 pack I most recently purchased...im done with them unless maybe someone can tell me im doing something wrong (Again I can't honestly imagine what that would be) but I was wondering if anyone else has problems with the lifespan of there Ryobi batteries?? Any comments or opinions would be greatfuly appreciated, Thanks All...Chris !!
Bear 🐻 keep up the great work and content in this amazing you have here...Its really great and now I'm turning all my friend onto it so Thank You Again Sir !
I have a few Ryobi tools and have not seen this issue. I'll ask around and see what pops up. Could it be the new charger killing them?
Any stuff for Porter Cable?? I know your love for PC Bear!
@thedenoftools how about a video of your favorite tool from each brand, or a shop tour. (You must hold the record for chargers)
P.s. thanks for all the great videos
I'm kind of looking for the other way around. Batteries that will work with DeWalt tools that have decent performance!
One useful tool i didn't see was the battery adapter. I used to havee all Ryobi tools and switched to dewalt. The adapter lets me use my dewalt batteries in my old Ryobi tools and not have to worry about charging and maintaining 2 sets of batteries.
There are so many different battery adapters it would need it's own video.
This is great for tools that you don’t plan on using a bunch. I got a tire inflater, glue gun. And staple gun for under $30 and can run them with my dewalt batteries. Also ryobi makes the best right angle for grinder.
I’m looking for an immersion blender that works with a dewalt battery.
Get the die grinder and attach it to the emersion attachment from one of the corded ones.
@@charlesmckinley29 okay I’ll try it out. Thanks.
@@charliebrownscurveball397 I haven’t tried it but it looks like it should work. My wife has one of the home kits. If you can get the chuck to attach to the shaft. I friend with 3D printer might has to make it look better. Hope it works out.
I would like to thank you for recommending the Dewalt after market tool's and bear 🐻 was neet with it with out it your a neet person my company had been shopping a harbor for 39 years good on you
I know Makita has some crazy tools and accessories, but I would love to see a video like this for Makita if there is anything made like this as well. I also wonder if anyone tried making unlicensed products using Ryobi batteries also. I do have the RC truck and that's the only one I can think of right now, but it may be licensed. I'm not sure on that one.
great stuff
Working on a Makita powered TV. Have all the parts I need including the Makita style power wheels adapter.
Fun stuff!
i wish dewalt would hurry up and make a 12v jigsaw.
I was really intrigued with these - but the hot glue gun made me melt.
Watch these knockoff products that use Dewalt batteries. I purchased one from Amazon and it ruined 2 perfectly good batteries. If you do purchase one of these items, remove the battery from it as soon as your done using it. The one I purchased slowly drained the battery when I wasnt using it and it over discharged and the battery wouldn't charge anymore.
WTF dude! This is like a bad infomercial. Some of these have no reviews and some are horribly reviewed. Did you just browse Amazon for some crap? What makes them top 10 or whatever? Did you or anybody else test this stuff?
👏👏
this needs to be done with milwaukee, which everyone knows is vastly superior.
Milwaukee batteries are mechanically almost identical (the locking tab is a little different, but the rails and contacts are in the same place), so I suspect you can do a quick search and find almost-identical products from the same manufacturer for Milwaukee.
First 🎉