WET SCOOTER FAULT FINDING

Sdílet
Vložit
  • čas přidán 15. 11. 2023
  • WET Scooter Fault finding. No Status light flashing #scooter wont move.
    SUBSCRIBE and LIKE we will answer any question you have. & you can contact us direct on nithsdale.wheelchairs@btinternet.com

Komentáře • 18

  • @terencephillips6833
    @terencephillips6833 Před 6 měsíci +2

    It’s a surprise to me that the manufacturer of these scooters don’t do a better job of water proofing these scooters..It’s a pleasure to see a skilled man working and diagnosing these problems, many thanks for showing us .

  • @frankmckie2992
    @frankmckie2992 Před 8 měsíci +1

    Lovely to see you again.... this video was especially interesting to me as we have gogo scooters....excellent no nonsense sound advice thankyou 😀👍🏴󠁧󠁢󠁳󠁣󠁴󠁿

  • @blackdotkiller1
    @blackdotkiller1 Před 8 měsíci +3

    Excellent help sir thank you 👍

  • @willgallagher4941
    @willgallagher4941 Před 8 měsíci +1

    Glad to see you back.

  • @cliveharmsworth2894
    @cliveharmsworth2894 Před 8 měsíci +1

    Good to see you again, great video and thank you.

  • @davidmiddleton3511
    @davidmiddleton3511 Před 8 měsíci +2

    Very helpful have you done a video on changing brushes on a 4 pole motor and cleaning the actuator.

    • @tomjacques4
      @tomjacques4  Před 8 měsíci

      Hi yes I have you just need to check

  • @tonymannion5743
    @tonymannion5743 Před 8 měsíci +1

    Had the same issue with mine (exact same model - what a co-inkidink!) turned out it was the key also. Used an old power drill switch for a while (all held together with Blu-tac ****All Hail The Gods of The Bostik, The Gaffer Tape and The Pocket Screwdriver, the Holy Trinity of DIY***) then upgraded to an actual Gogo switch and key. The battery box (same size as this model) has a nasty habit of sucking in water from its surrounding environment so dismantling, emptying and lashings of WD40 are required on the regular. I was warned when I got it that they are not a fan of the old H2O.

  • @bluethunder7814
    @bluethunder7814 Před 8 měsíci +1

    great video mate long time no see realy missed your videos thanks for the video

  • @marclaw4511
    @marclaw4511 Před měsícem +1

    Damp and wet conditions are the worst problems for these.

  • @koastal.kreature
    @koastal.kreature Před 8 měsíci +1

    Very informative! You don't happen to have a video of how to get into the tiller head of a shoprider sovereign by any chance do you? I'm paranoid about snapping it.

    • @tomjacques4
      @tomjacques4  Před 8 měsíci

      Very easy to remove my mobile number is on the website so contact me and I will FaceTime you and show you

  • @iannorton4463
    @iannorton4463 Před 4 měsíci

    I am so so happy to find you. I really hope that you will answer, hopefully. I've noticed you haven't uploaded in 3 months. I hope you are well. If you can please help. I have the newer envoy 8 with the digital tiller head. All of a sudden when running perfectly the thing just slams on the brakes and 2 of the red leds light up. Turn it off and on and I can go but only when I turn the power down. I'm a recently retired mechanic but I don't have a diagnostic device to plug in. Please help. Ian.

  • @MariaChover-np9ug
    @MariaChover-np9ug Před 2 měsíci +1

    Hi my friend has comeback from the dentist in his mobility scooter and it poured down now the front panel is flashing and won't work are you able to give me any advice thanks

    • @tomjacques4
      @tomjacques4  Před 2 měsíci

      Keep scooter in a warm room for a couple of days to dry out then try again

    • @MariaChover-np9ug
      @MariaChover-np9ug Před 2 měsíci

      It's still flashing on the display do you have a contact number to give me some advice as my friend is disabled and can't go out without his scooter thanks