How to Disassemble and Clean Your PlayStation 4 Pro for Optimal Performance
Vložit
- čas přidán 3. 02. 2023
- Hello, everyone! Are you prepared to explore the world of PlayStation 4 Pro repairs? In this video, we'll walk you through disassembling your PS4 Pro, cleaning it up, and repasting the CPU for improved cooling performance.
But, before we begin, make sure you have all of the essential equipment and materials on hand, and if you're not confident in your repair abilities, it's always better to leave it to the professionals.
We'll walk you through the entire process, from removing the screws and removing the back plate to cleaning the thermal paste and reapplying a new layer for better cooling. Don't worry, we'll point out any tough areas and provide helpful hints along the way.
So gather your supplies and let's get started! This video is likely to be a fascinating and instructive watch, whether you're a seasoned repair enthusiast or just curious about the inner workings of your PS4 Pro. And who knows your newfound repair talents might even wow your buddies!
So sit back, relax, and let's get to work on that PS4 Pro.
Hope you enjoy this wicked review. A like and a subscription would be appreciated!
You can also find me on Facebook or Twitter:
/ techgadgetsyoutube
/ torytoroczkai - Jak na to + styl
Followed this guide to figure out why my son's DVD player was not recognizing the discs. Turns out his little brother put a large coin into it...reassmbled and it works... 😂
This is a ps4 not dvd player lol
I'm so glad you're here to tell us these things.@@Ginger_Jack
Please tell me he uses it for Gaming aswell 😂
It's much better now.Thank you. It's really working.
No more airplane in the house.
Lol
Just bought one second-hand from GameStop (I know, I knew I was testing my luck), got assaulted by dismembered roaches when I opened the box. This was really easy to follow to clean the console out, looks so much better now
😂🤣 🤣
Removing the power supply/hard drive and a few screws/disconnect wires on the other side.
The "Entire" motherboard with both metal panels wiggle out at an angle without needing to take it all apart.
You won't have to repaste or anything. : )
Just found this out.
2:25: The shiny wobbly thing might be an electromagnetic interference (EMI) shield. Nice vid- thanks!! 😊
Thank you for this! Bought a second hand ps4 pro from a friend of mine,was filthy inside made the 747 nosies and actually was very slow loading thongs like 'dropping into fortnite map' followed your vid and she is SO MUCH BETTER NOW!! just one thing the putting back together bit was a little confusing (got there in the end) thank you for this content, saved me a trip to the local gadget man! Keep up the good work!!❤❤❤
Beautiful Video! Thanks Bro!
I appreciate your video, I was able to clean my Ps 4 pro. Grill was pretty much completely covered with dust. I have also replaced thermal paste. Now its all quite
I need mine clean help me it’s hard and I don’t have the tools
@markmarco9268 well it's kinda impossible without the tools
Same console.same colore..i juste finish ed the thermal pate change op following u step by step...so thanks à lot
Super profesional job !
thx master
Thank you so much
I would say the power supply cable is not difficult to remove their is a technique that requires very little force. The connector sits in a U shaped housing that is attached to the mother board of you look closely you can see a notch mid way up the connector you can wedge in the needle tips of the tweezers and use a fulcrum style rocking motion and it separates pretty easy.
This is the most damaged part in a previous repaired ps4pro and the cause of many dead systems as people rip the receptor right off the motherboard
Which PS4 pro models are cuh-7215b(US) series, with the figure 8 power cord?
I know of the Red Dead Redemption 2 bundle...are there any others?
Haha, yes, of course. We've never used it to watch a bluray movie, out of the fear I have from back when that used to mess up a PS2...
Is it necessary to use alcohol on the qtip to get rid of the old thermal paste or can I wipe it off with a paper towel and then apply new thermal paste?
Remove the old paste with alcohol pads and then apply new paste
Thank my ps4pro good and not overheating
Looks more like a documentary than an actual assembly. Lots of video scenes are not clear like wi-fi Bluetooth wires, improper angle during disassembly
Can you turn it on just right after you assemble it again or you have to wait a hours before you start using it again?
You can turn it on. No need to wait.
Are Torx T8 and phillips head screwdrivers enough?
If it’s a security torx yes
Applying thermal paste 4:02
WIBBILY WOBBOLY THING 🗣️
Is the 70% isopropyl alcohol ok to use?
Should be just fine!
Hello please i do the same steps and when i want turn it on don't want just give 1 second of blue light and turn off i don't know why ?
Maybe missed something like a cable you forgot to plug back in?
are u already fix the problem?any updates?
Can i do all this without replacing the thermal paste? Cause i want to deep clean my ps4 but i dont have thermal paste
I would advise you to replace the thermal paste as well. It's probably not a good idea to put it back as it is if you disassemble it.
Amazon, eBay, your local computer shop etc
@user-wz2nw9vy8t if you are first time doing this then stick with thermal paste.
Warranty void stickers not legal or enforceable in the USA.
Omg bro after I put that thing,my ps4pro jet is gone!!!!!! run very quiet!!!!
they are not hot,because they are memory for short time,for the apu session process.
he makes it look so easy, but it is likely going to take me 10 hours
*(and i don't go to repair shops because they are all scammers in my area/nearby)
Wish he should where each screws go
Ok do u need torques
Just did it today, none of my torque screwdrives or bits fit ones on my PS4. It uses torx security. I managed with some pliers and flat head. Would be easier with the proper tool.
Tried fixing my ps4 ended up destroying my ps4
Nice make a tutorial
I watched your video and tried to clean it,then I destroyed it myself.😅
Blimey.. what happened?
@@TechGadgetsMedia 2:39,I pulled the whole thing out when I pulled that plug😭
@@TechGadgetsMedia the soldering pad was broken,i don't know if it can be fixed.😭
Oh yeah that's the PSU connector.. I was struggling with that at first as well. Well if you have pulled the pad as well then maybe it needs new trace to be installed. If you can't do it then ask for a professional to do the soldering.
Now you are a destoryer😂