'23 BRZ: MTEC Clutch Spring Install

A much smaller upgrade than my other videos - the MTEC Clutch return spring installed in ~an hour with no commentary.
Track: Fungible - Hiracutch [Audio Library Release]
Music provided by Audio Library Plus
Watch: • Fungible - Hiracutch |...
Free Download / Stream: alplus.io/fungible

[@romeoally7266]

I just shot the bolt through the hole by the hood latch fml

[@bornwithanak440]

Once you removed the pin, how were you able to get the spring out? I’ve been struggling at that part

[@oruwu]

Push it with a screwdriver off the clevis perpendicular to the axis of the spring, it's wedged in there pretty tight. Hopefully you got it!

[@Nick-vi4rj]

If you haven't done the installation yet, here's how I did it and found it really easy. With one hand, push the clutch pedal down. With the other hand, pull the clevis TOWARDS YOU (which pedal is pressed down). Basically you're removing the "spring action" that's keep the clevis towards the pedal.
If you wanna understand the physics of why it's easier, here's a video on that. Also explains why these twins have "not so good" clutch feel (applies to both gens). czcams.com/video/8gvS3n8wI9Y/video.html

[@hypergram.]

@@Nick-vi4rjyour tip was a life saver. Thank you