God bless you😊 thank you 🙏 so much for your videos! Your Channel is so underrated I hope your channel blows up🙂 good luck and thanks again keep up the awesome work.
the trick with the Loctite is worth gold my Friend, but always use the jam nuts on the idle screws, because this will reduce possible air leaks even more.
actually a nice idea, with the fan in front of the radiator. but make sure that there's no dust and sand all over the palace, which could be blown up by the fan and eventually end up inside the engine.
Did you ever notice that your crossover tube was almost completely out on the left side? You can get a good view at 5:35. I wonder if you unfortunately sync'd with an air leak? Hope not but possible....
Appreciate u so much. Clutch pancake bearing needs adjusted on this bike. omg its So Beautiful. U still got this bike kevin? I been just chilling watching you're videos again Reminds Me how much help u were too me when i got back in the Game!!! U forget allot in 10 years!!!
awesome vid I've been looking for something like this played it by ear and ended up going 6 and 11 going to lower it to 10 sound a pinch fast for me at 11 but half kick she's fires up so sweet!!!! good stuff here!!!!
Hey I just hot my first banshee and have been building it for the last couple of months. It has a new top end and fmf fattys and k and n Air pods . what main jet should I put it it
just did tors delete yesterday, got it tuned at idle, when i went to put tension on cable but unscrewing it up on the bars nothing happens just chills at an idle still, i bought a motion pro tors delete. any advice?
Hey man do think i can send you a video of my banshee and if you can tell me if it is iddling right cause iam pretty new with this and dont want to blow my engine again i will highly appreciate an answer
Cleaned everything emptied all fluids and my banshee will not stay on it turns on and idles for about 3 seconds and it dies. When I hit the gas it bogs out. Any idea what’s going on??
If u guys really appreciate this man he accepts fb messenger pay shoot him 5-10-25/50 Bucks these videos take hours too make not too minchin the tallent. ANOTHER THING I NOTICED. After i tipped Kevin 50bucks on the video's he literally answered all my questions and was such a big help he deserves it guy's!!!!
I have a 97 banshee and I’m having a hard time tuning my carbs . I’ve cleaned both carbs & jets she starts in one kick but sometimes she bogs out … can you recommend how to tune ?? The TORS are removed she runs good but after a while she starts to bog out .. any help would be appreciated @SouthTexasBanshee
Hey sorry but why would you set the idle with the cable if it was already done with the idle screw and how do you get the needed freeplay in the thumb throttle .hope your screw on the throttle wasn't all the way in ... you need to set idle screw to reach idle rpm play with air screw one way and other way to find happy medium set idle screw again since playing air air screw will change rpm then sync carb with aircrew and make sure carb clean idle screw barely pushing the slide up or gaz will flow straight to main jet
I have a 97 banshee and I’m having a hard time tuning my carbs . I’ve cleaned both carbs & jets she starts in one kick but sometimes she bogs out … can you recommend how to tune ?? The TORS are removed she runs good but after a while she starts to bog out .. any help would be appreciated @southtexasbanshee
Allen Jaeger Here’s a link to one on Ebay, I clicked on the first one I saw, you may be able to find a better price. If you can get to the carbs on the snowmobile it will work, they sell adapters as well to make it easier to get into tight places. rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F272202975686
My banshee. I'm having troubles with it running lean (poping & crackling) the bike is all stock besides fmf fatty pipes on it, have stock makuni carbs with stock jets I mix 40:1 my elevation is usually always below 800ft/250meters I have my main needle on my throttle set on the second clip from the bottom #2
Also the air screw is two turns out, and I was wondering should I put fmf jets in it will it make the difference I like my bike rich on the smoking side... thanks
kc woodzie Are you the original owner for the Bike? Also the best mix for them is 35:1. Any leaner isn't great. Also make sure you mix it with how much you have in a tank. I personally like mixing with 5 gal gas tanks since I use a lot of gas in the desert, so I have to do 35:1 twice since my mixture measure cup only goes to 2.5 gals
Thank you so much for the help. I thought something was wrong with my frame but the motor does actually set a little closer to the pipes on one side. Is there anything I can do to keep it from hitting my left pipe?
Here ya go ! www.ebay.com/itm/125142805205?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=5e4Cn6PxQPq&sssrc=2349624&ssuid=U09MRCd9QLq&var=&widget_ver=artemis&media=COPY
When I ride my Banshee when I give it Full Throttle it pops and stutters and won't open all the way what do you think that could be I cleaned the carbs are set the screws 1 and 1/2 turn like you said I don't know what it can be all I know when it idles the one side Muffler it has little more smoke to it the other side seems a little dead doesn't blow out as much
On my phone when i clicked on your video there's no link to where to buy the tool from, look on the home computer and boom there it is in the link description...phone platforms can suck it.
Your such a huge help for everyone, can't thank you enough for all the help and video tech tips keep them coming . 👍
mrgrouchyguy
For sure
@@kevingalindo1 great videos !
Thank you for making this video my Banshee was running rough i got one of those tools and she is running good thank you again for the good content
One of the best explanations out there of how to do it.
Thank you for this video, it's going to make syncing the carbs on my bike so easy!
wow you can hear the diffrance sound great dude !!!
Thanks so much buddy! This helped a lot and I appreciate the detail and the link to the tool!!!
Appreciate all the videos I've picked up a lot from you!!
God bless you😊 thank you 🙏 so much for your videos! Your Channel is so underrated I hope your channel blows up🙂 good luck and thanks again keep up the awesome work.
quadzilla26b
That would be awesome ! Help spread the word!
More to come soon,I'm still recovering.
The best tuned carb video 🙏💯💪🏿
thanks for explaining how to properly do this procedure
the trick with the Loctite is worth gold my Friend, but always use the jam nuts on the idle screws, because this will reduce possible air leaks even more.
Great help!...I bought a TORS delete throttle cable off eBay and it seems long.. I can't seem to get rid of the slack..
actually a nice idea, with the fan in front of the radiator. but make sure that there's no dust and sand all over the palace, which could be blown up by the fan and eventually end up inside the engine.
Thank you so much I couldn't figure out what the hell was happening to my left carb
Eber Salcido your very welcome !
Best tutorial God bless you and your family.
Did you ever notice that your crossover tube was almost completely out on the left side? You can get a good view at 5:35. I wonder if you unfortunately sync'd with an air leak? Hope not but possible....
Appreciate u so much. Clutch pancake bearing needs adjusted on this bike. omg its So Beautiful. U still got this bike kevin? I been just chilling watching you're videos again Reminds Me how much help u were too me when i got back in the Game!!! U forget allot in 10 years!!!
Good video dude 👌
A lot of practical info!
awesome vid I've been looking for something like this played it by ear and ended up going 6 and 11 going to lower it to 10 sound a pinch fast for me at 11 but half kick she's fires up so sweet!!!! good stuff here!!!!
Seam Lessny
Thank ya sir!
@@kevingalindo1 hey hy do you have it on 5 tho what's the numbers mean
Thanks for this video now I can do this to mine it’s way out of sync. I need to buy one of those meters you got
I just purchased this flow meter. What is the optimum setting we want our banshee carbs at? Should both carbs read 5 or 7 or 10??
awesome video dude. i love your content
Great video, very descriptive
Hey I just hot my first banshee and have been building it for the last couple of months. It has a new top end and fmf fattys and k and n Air pods . what main jet should I put it it
So how would u adjust it at high idle if you don’t have those top adjusters I have oko 30mm and they don’t have those
So before you sync them you have to get the idle right 1st correct? I buddy just bought the sync tool we cleaned out the carbs and rebuilt it
I have a 1999, with stock exhaust, what would you recommend replacing the exhaust with? Thanks
Would my cable be too long if I cabt raise idle by adjuster on the bars
What do u run your idle an your air screws at
just did tors delete yesterday, got it tuned at idle, when i went to put tension on cable but unscrewing it up on the bars nothing happens just chills at an idle still, i bought a motion pro tors delete. any advice?
Hey man do think i can send you a video of my banshee and if you can tell me if it is iddling right cause iam pretty new with this and dont want to blow my engine again i will highly appreciate an answer
Great video!!
So I just ordered this part and have no idea what my carbs are going to show. So what would be a good number for me to set them at
subscribed...you rock man
How many turns out do you have on air screw?
Could some please let me know the tool name and code for ordering the product
Can you use this for a single carb for like a 212cc predator for racing go kart?
Cleaned everything emptied all fluids and my banshee will not stay on it turns on and idles for about 3 seconds and it dies. When I hit the gas it bogs out. Any idea what’s going on??
Did you need the adapter as well for the tool or just use it straight out of the box
If u guys really appreciate this man he accepts fb messenger pay shoot him 5-10-25/50 Bucks these videos take hours too make not too minchin the tallent. ANOTHER THING I NOTICED. After i tipped Kevin 50bucks on the video's he literally answered all my questions and was such a big help he deserves it guy's!!!!
I have a 97 banshee and I’m having a hard time tuning my carbs . I’ve cleaned both carbs & jets she starts in one kick but sometimes she bogs out … can you recommend how to tune ?? The TORS are removed she runs good but after a while she starts to bog out .. any help would be appreciated @SouthTexasBanshee
Could you provide me a link to this tool on ebay? The one in your description isn't available anymore. TIA!
Can you do a video on Cdi stage 2 instalment
I can do same what are you doing and the same numbers for keihin carburetor or there’s something different ?
Big help thank you.
What throttle cables are those???? My cables too a shit and need to replace them. What do you guys recommend???
When I get my banshee carburetors to #5 it idles low and dies?
I have a race set up but can't get em resynced after adjusting the Floats 🙈🤯
Hey sorry but why would you set the idle with the cable if it was already done with the idle screw and how do you get the needed freeplay in the thumb throttle .hope your screw on the throttle wasn't all the way in ... you need to set idle screw to reach idle rpm play with air screw one way and other way to find happy medium set idle screw again since playing air air screw will change rpm then sync carb with aircrew and make sure carb clean idle screw barely pushing the slide up or gaz will flow straight to main jet
Good video. I'm assuming these would work with 35mm keihin carbs too? Universal boot?
Josh Rolfe
Yup sure will, same exact procedure.
Why is gas running out of the air filter part of my carbs???
Why not adjust the idle screw? Doesn't it do the same thing?
nice what year is that Bansh? Shes pretty...
I have a 97 banshee and I’m having a hard time tuning my carbs . I’ve cleaned both carbs & jets she starts in one kick but sometimes she bogs out … can you recommend how to tune ?? The TORS are removed she runs good but after a while she starts to bog out .. any help would be appreciated @southtexasbanshee
Hey man, thank you for the awesome info! What type of gas tank is that?
Eric Harper
Hey bud it's just a tank cover from Nathan Wilmes, he's on facebook.
Thank you so much man!
I want to know where do I find a Synchro to like that and can it be used for snowmobiles
Allen Jaeger
Here’s a link to one on Ebay, I clicked on the first one I saw, you may be able to find a better price. If you can get to the carbs on the snowmobile it will work, they sell adapters as well to make it easier to get into tight places.
rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F272202975686
I have an 87 shee. My carbs don't have an idle adjust screw? Why is that
Awesome! Thanks brother. 98?
My banshee. I'm having troubles with it running lean (poping & crackling) the bike is all stock besides fmf fatty pipes on it, have stock makuni carbs with stock jets I mix 40:1 my elevation is usually always below 800ft/250meters I have my main needle on my throttle set on the second clip from the bottom #2
Also the air screw is two turns out, and I was wondering should I put fmf jets in it will it make the difference I like my bike rich on the smoking side... thanks
I meant #4 clip position sorry
kc woodzie Are you the original owner for the Bike? Also the best mix for them is 35:1. Any leaner isn't great. Also make sure you mix it with how much you have in a tank. I personally like mixing with 5 gal gas tanks since I use a lot of gas in the desert, so I have to do 35:1 twice since my mixture measure cup only goes to 2.5 gals
What does it mean when one side is blowing out more than the other will this video help 🤔?
Seven
Yes it will, that's usually a carb synch issue. Put in new plugs before you do it.
Thank you. Same procedure for stock carb setup?
Exactly the same yep.
@@kevingalindo1 thanks, I got a little more smoke comin out 1 pipe than the other, thinking it might not be synched
Just bought a 97 banshee and I synced the carbs and cleaned the reeds and valves and all it does is backfire and pop any suggestions
Ik it might be late but change your spark plug cap. They go out often and thats exactly what they do
I need help with my carbs left is smoking good right isn’t smoking almost at all
Mines doin the same.. could be carb sync is off or dirty/clogged carb.. or who knows
Your awesome
Why don’t my carbs have idle screws
Thank you so much for the help. I thought something was wrong with my frame but the motor does actually set a little closer to the pipes on one side. Is there anything I can do to keep it from hitting my left pipe?
Where do you suggest buying the sync tool from ?
Here ya go !
www.ebay.com/itm/125142805205?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=5e4Cn6PxQPq&sssrc=2349624&ssuid=U09MRCd9QLq&var=&widget_ver=artemis&media=COPY
When I ride my Banshee when I give it Full Throttle it pops and stutters and won't open all the way what do you think that could be I cleaned the carbs are set the screws 1 and 1/2 turn like you said I don't know what it can be all I know when it idles the one side Muffler it has little more smoke to it the other side seems a little dead doesn't blow out as much
Nelson Corbin mines having the same problem did you resolve it?
I take my idle screws all the way out and I’m still at 7 why is that?
Cable too tight maybe?
custom wrench for the clutch braaaaap
Where did you purchase your sync tool from?
mrgrouchyguy
FAST
I'm looking for it but everything but fast comes up. What am I missing?
mrgrouchyguy
It’s farmandsandtoys.com
Here’s one on Ebay
rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F272202975686
On my phone when i clicked on your video there's no link to where to buy the tool from, look on the home computer and boom there it is in the link description...phone platforms can suck it.
0
Why does my engine backfire
there is dif prices on synch tool's or they all the same
James Jiles
There are different ones. They 35-55 depending on the seller.
ok thanks that will help out a lot. witch one for tuneing banshee carb's
James Jiles
czcams.com/video/eXIUVamUTCE/video.html
@@kevingalindo1 is it direct fit on vm28 ?
👍💯👌💪
How the name of that tool?
Here ya go my man.
www.ebay.com/itm/123323160699
@@kevingalindo1 thanks a Lot 👍🏻🇵🇷
Thanks a Lot 👍🏻🇵🇷
The engine is stock
Bro help me out with my banshee plz. I can’t start , how I can fix it