What happens if timing belt breaks part 1(insane vid for my subs)
Vložit
- čas přidán 12. 09. 2024
- Trying to break timing belt and see what happens.
Didnt break but engine shut off from teeth skipping.
Engine is non interference. If you do this with a interference engine it will blow up.
Another insann vudeo at 50 subs👍
That's one tough belt. I bet his neighbor is going to be pissed when they come back from vacation.
You think I would do that on my car, they didn't even noticed👍😂
Sexuales trojan comdon funios niño año 12 funiking 🖕🖕🖕🖕🖕🖕🖕
Toyota is refusing to die.
Most toyota engines are non-interference (no hitting valves with piston). Just set the timing and slide a new OEM toyota belt and Japanese bearings and drive another 100K miles.
If is 1kz engine what will happen is tremendous disaster.. cylinder head will bent all valve
The engine won't blow up if the belt breaks on an interference engine. More than likely the piston will just impact, and bend the valves in the cylinder that is next in the firing order after the belt breaks. That's what your timing belt does is synchronize the timing between the crankshaft and the camshaft(s) so everything moves in the correct order and at the correct "time". The engine won't explode, unless there are other serious problems, you will just lose compression in the cylinder with the impacted valves.
...Yes it will. The valves bend or break off, destroying the piston, cylinder, and head. That's an entire longblock. Had it happen on my 1.8T VW. Yes, it absolutely will, and does destroy the engine.
@@refluxcatalyst7190 damage? For sure. Destroy? Possibly. Blow up? No.
@@chrisladouceur4093 false. Happens all the time. Breaking a timing belt on a crash engine (interference) destroys the engine in a catastrophic way. MAYBE you get lucky and only the shortblock is gone, but often enough it ruins the inside of a cylinder or leads to a broken valve getting caught by the piston skirt and knocking a hole in the side of the block. Or it causes the piston to disintegrate, and the wrist pin goes thru the block. None of this is "odd" or "unheard of." If fact, they are "known methods of failure for this particular instance." That's "blown up." It's real, it's a known mechanism of failure. Not much to argue about here bud...
@@refluxcatalyst7190 if you consider a scratched cylinder wall and bent/broken valves as “BLOW UP” then yep, you’re 100% right
Looks like the timing belt is still good it’s the tension! lol
Best most informative video I seen all my 30 years of life love u
Exorcise in futility . won't see any damage looking at belt. Damage will be inside the engine. Bent valves, broken valves, hole in piston, cracked cylinder head from broken valve pieces being smashed between piston and head. Or nothing if it's not an interference engine !
The best damage occurs when your going 60 mph or faster !
Yes it's not a vehicle engine
very informative.
This is a good demonstration
You shanked that belt did you learn that in jail.
Yes, 5sfe Toyota engine is very reliable. That's why I have two such vehicles. Though rather underwhelming in power. I think next generation they went interference engine. The mechanical repair industry didn't really warm to the non-interference concept
Its not gonna snap by doing that because you loosen the tension. Belts snap because of a seized water pump pulley or tensioner pulleys.🤦🏻♂️
i never knew those belts were that tough.
now i see how tough the timing belt is, makes me sad i wasted my time today changing the belt and breaking a tensioner bolt
need to drill it out now ffs
Cool... never thought
👍👍👍
It shows that timing belts is built to last😂
This is one tough Surviving Belt.. WOW, never given up
I've been driving on a broken belt for 1 week 😂 repaired it today...those belts are really tough
That's some gangster shit
@@fs0c1ety_bs92 😂😂
efforted much to break but lol ,but dont trust the belt heavy cost at the end.
nice
timing belts like dayco and Gates and Toyota have kevlar strands in them..yep the same stuff used in bulletproof vests.... what really kills a belt is oil leaks over time
Antifreeze and locked parts
*cuts belt*
Timing belt *regenerates health*
Does a bad timing belt cause all the lights on the dashboard to light up
Interesting. It takes a lot more than it seems. But of course it only was in idle.
The suspense is real
I guess this is the reason why Russians only change their timing belts once they have snapped and they are left stranded on a dirt road 😂 timing belts are strong 💪FYI, I live in Russia with my Russian wife and my father in law is one of the Russian culprits that doesn't change his timing belt, getting stuck on a dirt road, ringing me up to come help him 😂
When your timing belt brakes does it always mean your valves are bend
Depends on engine to engine. Some do some dont
Just metal and plastic got it recycled not my problem anymore. Maybe they can save it maybe they can sell it for parts .
When the timing belt has a problem timing is off and it cranks and won't start.
Where do I buy that belt?
From Toyota. Or I can sell you that one.😂😂😂
Thanks for watching.👍
@@Photostudioww:) Thanks for sharing the video.
oh no!@@Photostudioww
Would have been much easier to have simply put the screwdriver or something similar underneath the belt what it was running.
Next video I would like to see ...because I'm curios if the engine it's stil running and usable after you mont new timing belt..and make a detailed tutorial how to set the timing, after the belt broken.. that's my friend it will be awsome👌.will help a lot of people 👍 ...thank you!
I have a video with a new belt on and I show the belt that I cut. It's the part 2 video.
I haven't done a timing belt video, but there are a lot of great detailed videos. Just search for the car you have.
👍
@@Photostudioww ok, thanks for suggestions!👍
This happened to me while i was on the move and now my engine is f@cked up. Lots of money is needed
Next time just push the belt off the cog at high rpm
Better effects 😁
This is probably the same thing that is happening to my Toyota 100, it just won't start. Checked everything, the wiring, the distributor even the plugs and nothing. Thanks so much. I will check the timing belt, replace it and see what happens. I will update in a few if this helps @Edgar
Any update?
Don't forget to replace the engine before changing the belt ;)
I’ve seen a fire happen from e engine skipping time. Kinda funny actually. Ford 1.9 cvh
Does VW passat b5 1997 1.6l engine has valve clearance?
No valve clearance. The valve will hit the Piston if not timed properly.
@@Photostudioww Thanks man! Gotta check my belt lol
Thank you, i really wanted to see what happens when the belt snaps, i wish it snapped, but i think skipping teeth has the same effect on the car, dont know, i heared it bends the spark plugs inside the engine or something like this
On interference engine it can bend the valves but this is a non interference engine on a Camry I think
replacing valves is more difficult than replacing spark plugs
If it breaks whilst driving is it true that the valves will be bent
Not in this engine
Half of the video told me that how to cut timing belt
What kind of car and motor is it?
2001 Toyota Camry 2.2L
Took my truck to get the timing chain replaced and they tell me after they replaced it that they hear a knocking noise coming from the engine. Long story short my engine seized up and was checked up by another mechanic and was told the valve hit the piston. Was this due to the faulty replacement of the timing chain by original mechanic
Toyota 5S-FE
insane indeed
Nice hand tatt.
This is straight up automotive Russian roulette... except there's *at least* one round in every chamber and Rasputin is doing a solo campaign.
(Helps to read the following with a Russian accent)
**BLAM**
Rasputin: Weak.
**BLAM**
Rasputin: What, you girl gun or something?
**BLAM**
Rasputin: I shoot piss harder than you shoot bullets, gun. You are, how you say, pathetic.
**BLAM**
Rasputin: You are boredom little gun.
**BLAM**
**forehead explodes**
...
...
...
Zombie Rasputin: Good game little gun. You want play best two of three?
What happens if timing belt breaks.In a non interference engine like this nothing at all
¿Qué sucede si la correa de distribución se rompe? Parte 1
Intentando romper la correa de distribución y ver qué pasa. No se rompió, pero el motor se apagó porque los dientes saltaban. El motor no tiene interferencias. Si haces esto con un motor de interferencia, explotará.
That's not the timing belt that's the serpentine belt !
that is the timing belt.....
9 months passed. So you two already figured out what belt it is?
@@user-ed5pj6co1k might be the belt that his dad used to hit him with
Timing belts don't just snap on their own, It's normally the tensioner what fails or one of the pulleys freeze /sieze. Take a old used timing belt out try and snap it with your bare hands it will be impossible.
Yes just like I did on my buggy this last winter: I forgot to drain the water, outside being freezing cold, I went to school then my father drained it, (like a noob tho) water was still in the block, like a dumb ass I cranked it...
Guess what ? I broke the belt right off because the water pump gear was like frozen welded :P
But I don't have an interference engine (Daewoo Matiz/Spark 3 cylinder sohc)
U can use a regular belt to get home, thin, panty hose?
K
Koo
My belt tensioner in my 2003 ford 4.6 Triton went bad, acted like very big misfires but never threw a code $45 later she was all better
I hope this was a non-interference engine ?!#%
BENT VALVES
I have a Honda unitta timing belt that has 200 k miles on it and it is a part of my experiment on how long before it breaks I am the original owner of this 2000 Honda accord lx.timing belt and water pump was changed on October 2004 at 105 K miles at the dealership.So now its been 15 years ago.I have a gut feeling that this timing belt will not break for the next 5 years or until the year 2025…My odometer readings now is 401 k miles.Same engine and transmission.Since the beginning I use synthetic oil every 6k miles and a valvoline synthetic transmission oil every 30k miles . I am not afraid if the timing belt breaks because I know it won't.
Any update on your experiment?
what a chad
Toyota 2.2 (5S-FE )
so , even if it is cut several times , belt still does his job.......interesting , considering scammers who look at engine and say......OMG U WERE SO LUCKY SHE DIDNT BRAKE......
If he actually drove the car and accelerated onto a highway, it would have snapped no problem. The point of changing the belt, especially on an interference engine is so you don't bend any valves if the belt fails or skips a tooth. It doesn't have to break to hurt the engine, just stretch. Sure it won't matter much if it's not an interference engine, but it's still an inconvenience.
It can also skip a few teeth and Look out👍
Give name of belt please
Dads need to be dad's &Moms need to be mom's
Attention: The following is for well you know..if you don't keep reading...
Stop. 🛑
Were made in HIS image. HE made us with the power of free choice
A good prayer:
I'm a sinner JESUS please forgive me for all my sins I know you shed your Blood for me on the cross at Calvary. Thank you JESUS for my salvation and for shedding they Blood for me. I love you JESUS.
Romans 10:5/10 ct...❤️k
JESUSisLord!Amen...
Amen..
If you'd like to call someone who cares
83
For
Truth.
bc you don't know when you'll die?
.y r u hesitant.
.... ... .
220,000 miles original belt? Probably not
From what saw tearing it apart, looked like no one had touched the belt.
This is how
Tensioner is loose
Tensioner bolt snaps when loosening, snap means factory torque down.
Timing belt cover, all bolts had the snap.
You only get that from originally torque set factory torque machines.
Pure nonsense. The belt still had the writing on it. Factory torque snap? WAFFLE!!
@@martinking3242
Had the writing but had the cracks also.
You dont get those cracks from replaced on schedule, belts
What model Toyota is the car?
Camry
The legendary toyota Camry best cars ever made 91-01. Stay away from 01-2010 Toyota Camry not good. The 90s arr the good years for toyota any model just not corolla 98+ engines made in us somewhere total crap
Yes 2001 Camry 2.2L
Belt will not cut. Hmmmm
This was lame. It just fell out of time. Didn't actually break.
Toyota makes tough belts. 🤘
Non interference, interface? 🤦Stupid spell check
My timing belt came off my 1995 Honda and I just place the belt back on I need help
I recently put together my 1997 Accord 2.2 engine. Not sure what engine you have. On the 2.2, you'll need to make sure both timing belts don't have any slack and timing marks are spot on including the distributor is set correctly. Worst case scenario - If T-belt came lose, you'll need to verify valves are not bent. I believe the 2.2 are interference engines. Good luck!
My car stop when I was driving and this is the sound when I try to restart it:
czcams.com/video/zAo-88VSw18/video.html
This could be timing belt?
Yes. The engine is spinning fast. Take valve cover off and if the cam doesn't move , your timing belt is broke. 👍
@@Photostudioww sounds like there is compression maybe is the fuel pump. I am struck by the beep sound after the ignition attempt. Thanks.
You should be able to here if the fuel pump turns on by putting the key to ACC. Or if the car doesn't have this letters, just turn key but don't start.
What car is that?
@@Photostudioww citroen c4 2011. 60.000 kms
@@Photostudioww yes if Im turn the key I hear that final beep on the video.