Porsche 993 - Painting calipers, replacing rear brake pads, replacing wheel stud
Vložit
- čas přidán 4. 09. 2022
- In this episode I decided to paint the brake calipers red, but before we get to that I had to replace the brake pads in the rear and I had a missing wheel stud that needed replacing.
I've a 1996 993 C2 iris blue metallic, 66,000 miles, 6-speed manny tranny, varioram. No CEL, no oil leaks (no really!). I'm never selling it!
I love the 993. This is my second one, and I love it! I'm a bit partial to my 95 coupe ;)
@@beardedgarage Good man! BTW, I also do my own maintenance.
@@oibal60 hell yeah. I love working on these. I have sooooo many more projects. my 95 is getting the engine out treatment this fall (it snows here for 6 months) and I'm going all out
Nice job. I've got the big black calipers on my 92 964 Turbo and they really need an overhaul like this.. I also have two snapped bleed screws to remove that I am not looking forward to. I'm thinking it may be better with them off the car! Nice to see how good a job can be made with painting it by hand - it has made me think about tackling it myself!
If you’ve got broken screws, it’s probably way easier to take the calipers off the car in the long run. I’m sure the painting is easier off the car too. I’d wait until you need a brake job and a brake fluid change and do it all at once.
Does anyone know the part no for those parts that clip on the pistons?
Clumsy damaging way demonstrated to compress the pistons, best to use a brake pad compressor. A compressor doesn’t damage the face of the calliper.
To each his own. I’ve done it with pliers, screw drivers, compressor, etc. as I said in the video, I’m sanding and painting the calipers so I didn’t care about the face of the caliper.
Are those decals the OE sizes? Are the front and rear OE stickers the same size? I noticed the rear calipers are smaller than the fronts.
I measured the decals on the original calipers and printed them. They probably could have been a little bit bigger, but they look pretty good on the car.
@@beardedgarage It sounds like they are the same size front and rear? How much for 6 of them shipped to 94547? Appreciate the time!
@@93B18 Yes, these are the same F/R. I'd be happy to print them for ya. I can't find a way to PM here to get an address, but 6 to 94547 would be $20
@@beardedgarage Awesome. I appreciate your content. Happy to grab 6 of them. Do you have an email?
I’m probably 14 years older and have a 14 year head start on my 993. I also have a beard and have done many of these projects! 😂
Sounds like we should grab a beer while working on cars!
My engine still isn't in. But where did you get the stickers? I need some for my '96 993.
The engine isn’t in? What’s happened?
I made the stickers on my wife’s vinyl machine.
Let me know if you need stickers or help on the car
@@beardedgarage Thanks B. Hot weather, had to go to Monterey for work etc. I have the engine under the car just need to push it up into the bay. I still don't have the vacuum hoses correct but I am going to go with the way I have them installed and try to start the motor. Yes I do need the front and rear stickers, I had my calipers powdercoated a year ago but no stickers. My calipers are Green like the car.
@@beardedgarage Let me know how much a set is and I'll send you some beer money.
@@ocmacman I'd do that. How about $10 for the set of 4?
@@beardedgarage works, let me know where to send PayPal f&f of course. Thanks. Hoping to get back under her this weekend and get her back on the ground. Our heatwave is over out here.
FIRST!
Awesome!
Your elbow blocks the view😢
sorry about that, I keep trying to make these videos better
Sorry, but for the most part you used a bad camera angle. All I could see was the back of your arm. I had to stop watching at around 6 minutes. Just trying to help for your future videos.