Best Hobby Resin Printer of 2023 - Uniformation GK Two
Vložit
- čas přidán 19. 11. 2023
- I change the gktwo 8k into a 12k beast machine and give my opinion and show before and after as well as details on how to add the upgrade kit
More info on this machine and to purchase here is an affiliate link which doesn't cost you any more but does help the channel:
The Printer: Uniformation GK two : www.uniformation3d.com/produc...
Get $80 off when you use Code: ground
⭐️Huge Thank You to My Patrons: / groundeffected
This video was sponsored by Uniformation.
MERCH Now Available! - groundeffected.com
🎨 Supplies: elementgames.co.uk/?d=10734
🖌️ US Amazon LIST:
▪️ Airbrush Iwata Eclipse: amzn.to/3FuG821
▪️ Sunlu standard Resin: amzn.to/3Fns0aV
▪️ The Army Painter Wet Palette: amzn.to/3M6Q45K
▪️ Vallejo White Ink: amzn.to/400s4ae
▪️ Citadel Chaos Black Primer: amzn.to/3tw57zm
▪️ Gold spray paint (similar to Montana Gold): amzn.to/3Fm1rTo
▪️ Bamboo Synthetic Make-Up Brush: amzn.to/45DgK53
▪️ Siraya Tenacious for Strengthening Prints: amzn.to/3M46sUw
▪️ Bostik Blu Tack Mastic Adhesive: amzn.to/3rP1gx3
▪️ Mixed sandpaper: amzn.to/492fon6
🖌️ UK Amazon LIST:
▪️ Airbrush Iwata Eclipse: amzn.to/46AFX1j
▪️ Sunlu standard Resin: amzn.to/48ZDgYv
▪️ The Army Painter Wet Palette: amzn.to/3tFj1zv
▪️ Vallejo White Ink: amzn.to/3Fnu4zH
▪️ Vallejo Blue Violet ''Pinkle'': amzn.to/46VPsY
▪️ Citadel Chaos Black Primer: amzn.to/48ZllkQ
▪️ Montana Gold spray paint Gold Chrome: amzn.to/46T2uWM
▪️ Bamboo Synthetic Make-Up Brush: amzn.to/3FkG7Om
▪️ Siraya Tenacious for Strengthening Prints: amzn.to/491selO
▪️ Bostik Blu Tack Mastic Adhesive: amzn.to/3tFujnj
▪️ Mixed sandpaper: amzn.to/3S5ZaTX
🔔 Find me on SOCIAL:
Instagram - / groundeffected
Facebook - / 548001063221083
TikTok - / groundeffected
Discord - Available through Patreon
Website - groundeffected.com/
📍 Check out ROXY ROSE!
_roxy_rose?utm_...
vm.tiktok.com/ZMLxUenru/
#3dprint #3dprinter #3dprinted #3dprinting #acrylicpainting #paintingspiderman #resinfigures #resinfigurepainting #spidermanps4 #spidermanps5 #3dprinting #3dprinter #painting3dprints #miniaturepainting #howtopaint3dprints #3dprinted
Technical mumbo-jumbo below:
---------------------------------------------------
Related Phrases:
How I painted my 3D print / Spiderman, 3D Print, 3D Printer, 3D Printed, 3D Printing, Acrylic Painting, Painting Spiderman, Resin Figures, Resin Figure Painting, Spider-Man Ps4, Spider-Man Ps5, 3D Printing, 3D Printer, Painting 3D Prints, Miniature Painting, How To Paint 3D Prints, 3D Printed, 3D Printed Miniatures, Mini Painting, Resin 3D Printer, 3D Printed Minis, 3D Print, Paint 3D Print,
Disclaimer: We do not accept any liability for any loss or damage which is incurred from you acting or not acting as a result of watching any of my publications. You acknowledge that you use the information I provide at your own risk. Do your own research.
Amazon: Groundeffected is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn commission fees. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Copyright Notice: This video and my CZcams channel contain dialogue, music and images that are property of “Groundeffected”. You are allowed to share the video link and channel, and embed this video in your website or others as long as a link back is provided.
© Groundeffected - Jak na to + styl
I own this printer and have had great success with it. Any fails have been my own fault. It’s reliable, dependable and produces outstanding results. Plus it can print in the wintertime!
Just got one can't wait to use it 😊
would you recommend this for a beginner? its an actual headache trying to find a decent printer especially for winter time 😅
Uh my Dude, You're probably blowing the eardrums out of everyone listening on headphones. The music is a bit loud(it IS properly Funky though).
I recognize that print. I can't wait.
Ah really. Hahaha I suck at this video thing even after so many tries 😂
@@GroundeffectedI listen with earbuds and the sound is perfectly fine.
hi there, just for future refernce, i have to keep adjusting the volume lowering when music is on, and then increasing to hear what you are saying. but do enjoy your content greatly
I have the complete set (12K from factory) and I absolutely love them. So easy and they just work.
Love it, great video, looking forward to using this machine to grab that machine..
Thank you for the video 😊 Ordered mine on the 17th , finally got to shipping label printed on the 28th . Was hoping I got in super early on the Black Friday sale but seems things are backed up . Very much looking forward to getting it as I have been crash coursing blender CAD and the slicer seems super simple .
Great Video been thinking about that upgrade myself!
I’m still on the fence about it. I have two machines one is 8k and one is 12k I am gonna leave them as is and see how it goes for a while. Annoyingly I have to use chitubox to slice for now but I’m sure lychee will support it soon enough.
Seriously clean breakaway on those supports, do you do your own?
Any idea when it will be available for purchase with the 12k screen pre-installed?
Have you tried their ultrasonic wash machine???
All comes down to your XY resolution and think that 19×24μm is almost the best I've seen. Only one better is Elegoo Mars 4 Ultra 9K with 18µm, but then you have a significantly smaller print volume :(
I really want to get one, but i just got a Saturn 2 last year and with how technology is advancing I bet as soon as I get one there'll be ANOTHER one that ill be tempted to get. I must break the cycle!
Honestly the way these things are there will be some crazy cool new machine in a couple months probably.
You were right, the Saturn 3 and soon a Saturn 4 in just 4 months. I doubt they are much better.
Really wanna get it but I just got the k1 max on black friday 😅
What thick forearm you have while unscrew this... I always knew my dad was bulky ^^
Damn i need to get me one of these printers next
I honestly can say this has become my favorite machine at the moment.
@@Groundeffected i can see why. Vat heater, how the top pops up and the build plate mechanism all give it that edge above the rest. The screw on build plate and leveling is annoying
Lank Kief bru, thanks for your Videos, considering this one, I only have 8K in the Bank, he he.
Hey @Groundeffected did you order yours directly from uniformation? Since I’ve got an email from them saying they won’t be able to supply the UK plug for my bundle, was it the same in your case ?
Cheers
Hmmm mine is direct from them but I got plugs. Or maybe I didn’t I honestly don’t remember but they use they same plugs all our other machines use or just any adapter plug. I dunno the name of it lol but I bet you have a draw with 5 of them in it not being used!
I ordered mine a week ago. Now in kid before Christmas mode!
Says pre-order when I look and I don't see the 12K upgrade.
And about Heygears and Uniformation GK2, which one is better?
Uniformation gktwo is better because it can use any slicer but heygears is stuck with their slicer only but it depends if you like their software though..
@@Groundeffected If you had to choose which one to buy, if the slicer is not a problem, would you still choose the gk2?
So....did you put it all back together and then find one spare screw?
No but that is the rule right you supposed to always have spares!
Gran says make sure you use a torque wrench or whatever to not over tighten all your bazillion screws.
I just picked up one from Amazon - thanks for reinforcing my choice 😂
Dude you gonna love it. Make sure to check level both mine needed to be level despite them saying it’s level from factory. They were a fraction off. I like it to be tight on those papers. Then also set the temp to stay at 30c dunno why but I heard it helps it to stay within that sweet spot temp range. Other then that it’s so good once you’ve got your resin settings dialled. I swear to god mine has not missed a beat. I have two running every day and they’ve both not once given me a minute of trouble. Best experience so far with a machine. The build plate threw me off at first but now I like it! It also doesn’t drip resin when you take out the prints. I honestly can’t say enough good things about this machine from my experience
@@Groundeffected will do, shows up tomorrow and the first print will be the Loki and Silvio you showed. Even got the same resin, with your mix ratio !
@@Groundeffected would you mind posting your settings for this printer with your magic cocktail of Nova3d and Syratech? Would like a baseline to start dialing it in.
@@RookFett broski I moved on with resin. Damn I need to do an update video I use sunlu and sunlu and like now
@@Groundeffected arrrrrrrrrrrrrrrrrrrggg --- of course - that is my way - get old info ;)
Man...3D printing just seems to be getting easier and easier, every day! lmao
You said doodoo…
Great job with the updates
Hahaha you typed it
Dang! What gold did you use for the horns?!?!
Montana spray paint gold.
Rinse your prints under hot water, they will effortlessly detach from the build plate, and the supports will follow suit. Direct the water precisely to avoid any distortion to the actual print.
Literally don’t even need to dude they just pull off with ease.
@@Groundeffected I noticed that you utilized a trowel to remove your print from the plate. If you rinse it under hot water, you can use your hand to pull it away easily. Using a trowel may potentially damage the surface of the plate, just a friendly suggestion.
@@SimplyAlteringMaterials you know when these resin printers first started coming out we were sent sand paper to sand the plate for better adhesion. Don’t worry about the plate dude. I scrape it after every print too just to take off any potential bits from the raft that might be snapped off( usually not a single piece) and I shove that thing back in and print again. Haven’t washed a single build plate in over 3 years printing.
@@SimplyAlteringMaterials the more scratches in the metal plate the better adhesion you will get.
But for a machine how good is the machine in the list of all the machines on the machine list
The best a machine can machine if a machine ever did machine, machine
Ok I want to see same 8k print vs 12k print
I will do this. Just hadn’t had time yet.
For Gran!
Brent needs to narrate everything.
FYI Uniformation, the BF sale price jumps back up to 849 when checking out :(
No, I’ll message my contact now and see what’s up.
Is this Amazon or official website?
@@Groundeffected Official website, it adds it to the cart as the right price, then when you click checkout it jumps back up to $850, tried a few different browsers
Subtotal
$849.99
Shipping
Enter shipping address
Total
USD
$849.99
@@darkmoonmarket did you add the code ?
👍👍👍
Amazing printer too expensive for what i print but awesome nonetheless.
Shout out to Faux Hammer
Shout the faux…
Just don't think I'd see any difference.. I know I'm small but I reckon I'd need to be microscopic to spot the improvement 😅😂😂
Yea I didn’t see any noticeable difference which is why I said I felt like the standard machine is perfect put the box.
its a nice looking printer but over £280 more than a 12k Saturn 3 ultra for the sake of the heater i dont think its worth it tbh.
I mean I won’t lie if it wasn’t for that heater I wouldn’t have a single print for the last few weeks of videos. It’s so cold in my back room there is no insulation and it’s getting very cold in England
Yeah i fully understand that as i stay in Scotland its 0 degrees in summer up here.@@Groundeffected
You will never convince me this is $350 better than the Saturn 3 Ultra. Because it isn't.
After using the Saturn 3 ultra for about a month I think I'd rather have bought this printer instead
I've never had an issue with mine.
@@ericart
Never ever said I was trying to. But the Saturn couldn’t print in my back room currently so for me I’d rather buy 50 of these with my own money than one of the saturns that currently would not work in my back room due to lack of heating. It’s a simple tiny cheap addition that takes the whole printer into a completely different territory. I don’t care if you can print better when the temperature is controlled and in optimal range. Gktwo does that for me. Just that feature on its own makes any other printer currently without one obsolete. Last year I spent an astronomical amount heating my studio to be able to print and still suffered failures due to temperature, this year I’ve not had to manually heat a single print and have not had a single failure on any of my heated machines.
The other nice thing about this brand is that they natively use a Prusa slicer fork.
I have a Saturn 3 and can't print anything other than the stock rook even with the right parameters. Bought this on black friday. So I'm convinced.😅
Uniformation ids down
Huh? 🤷🏻♂️
Too much expansive !
Constructive criticism: You need to work on the "Errs". It's a really bad filler word.