THE BEST Elegoo Saturn 4 Ultra Review on The Internet
Vložit
- čas přidán 28. 04. 2024
- *GET THE SATURN 4 or 4 Ultra Here * - shrsl.com/4icdx
Check out WORLD'S BEYOND - geni.us/WorldsBeyond
Looking for Great Models to Print? check out the following Creators
Loot Studios - geni.us/LootStudios
MyMiniFactory - geni.us/MyMiniFactory
OnePageRules - geni.us/OnePageRules
TitanForge - geni.us/TitanForge
Get any printer working easily with the Photonsters XP Range Finder - www.thingiverse.com/thing:602... (watch my video for full instructions • How to Print Perfect M... )
Join this channel to get access to perks:
/ @fauxhammer
Buy WARGAMER - The best Resin for Miniatures yesthats3dprinted.com/pages/w...
3D Printer Cleaning Mat: geni.us/3DPrinterCleaningMat
This Video is part of our series looking for the Best 3D printer for Miniatures; www.fauxhammer.com/top-10/the...
Special thanks to the following Creators who provided models
The Damned Wargames Atlantic/@MiniWarGaming - gamefound.com/projects/mwg--w... (not publically available as STL Files)
Wolverine - Drafnir Studios - cgtrader.sjv.io/3eJyqv
Artis Opus FauxHammer Essentials Set: store.artis-opus.com/products...
FauxHammer Facebook Group - / painthub
FauxHammer 3D Printing Group - / 3dprintedminiatures
FauxHammer Discord - / discord
Best Airbrush For Miniatures: www.fauxhammer.com/top-10/bes...
Beginner Airbrush: www.fauxhammer.com/featured/b...
Affiliate Links to support us.
Element Games - elementgames.co.uk/wargames-a...
Wayland Games - affiliates.waylandgames.co.uk...
Forbidden Planet: forbiddenplanet.com/catalog/?...
Amazon - www.amazon.co.uk/s?k=Warhamme...
Website: www.fauxhammer.com/
Facebook: / fauxhammerblog
Twitter: / fauxhammerblog
Instagram: / fauxhammerblog
Pinterest: www.pinterest.co.uk/fauxhammer/
Video Editing by VidPros: app.vidpros.io/r/J50Z26
00:00 - Intro - Zábava
*GET THE SATURN 4 or 4 Ultra Here * - shrsl.com/4icdx
*Check out WORLD'S BEYOND* - geni.us/WorldsBeyond
Looking for *Great Models to Print?* check out the following Creators
Loot Studios - geni.us/LootStudios
MyMiniFactory - geni.us/MyMiniFactory
OnePageRules - geni.us/OnePageRules
TitanForge - geni.us/TitanForge
Get any printer working easily with the Photonsters XP Range Finder - www.thingiverse.com/thing:6023738 (watch my video for full instructions czcams.com/video/Gm0-z971tgY/video.html)
Join this channel to get access to perks:
czcams.com/channels/_9Jsf3SP8aMJgn0xv5jHjA.htmljoin
Buy WARGAMER - The best Resin for Miniatures yesthats3dprinted.com/pages/wargamer?ref=FauxHammer
3D Printer Cleaning Mat: geni.us/3DPrinterCleaningMat
This Video is part of our series looking for the Best 3D printer for Miniatures; www.fauxhammer.com/top-10/the-best-3d-printer-for-miniatures-models/
Special thanks to the following Creators who provided models
The Damned Wargames Atlantic/@MiniWarGaming - gamefound.com/projects/mwg--wargames-atlantic/the-damned#/section/the-damned-infantry-23207 (not publically available as STL Files)
Wolverine - Drafnir Studios - cgtrader.sjv.io/3eJyqv
Artis Opus FauxHammer Essentials Set: store.artis-opus.com/products/fauxhammer-mixed-brush-set-5-brush-deluxe
FauxHammer Facebook Group - facebook.com/groups/PaintHub
FauxHammer 3D Printing Group - facebook.com/groups/3dprintedminiatures
FauxHammer Discord - discord.gg/dPexM9SeN4
Best Airbrush For Miniatures: www.fauxhammer.com/top-10/best-airbrushes-for-miniatures-wargames-models/
Beginner Airbrush: www.fauxhammer.com/featured/best-beginner-airbrush-for-miniatures/
Affiliate Links to support us.
Element Games - elementgames.co.uk/wargames-and-miniatures-by-manufacturer/games-workshop/warhammer-40k/warhammer-40000-indomitus-english-?d=10279
Wayland Games - affiliates.waylandgames.co.uk/781-1-3-4.html
Forbidden Planet: forbiddenplanet.com/catalog/?q=Warhammer%20Imperium&sort=title&page=1&affid=FauxHammer&
Amazon - www.amazon.co.uk/s?k=Warhammer&ref=nb_sb_noss_2
Website: www.fauxhammer.com/
Facebook: facebook.com/pg/FauxHammerBlog/
Twitter: twitter.com/FauxHammerBlog
Instagram: instagram.com/fauxhammerblog/
Pinterest: www.pinterest.co.uk/fauxhammer/
Video Editing by VidPros: app.vidpros.io/r/J50Z26
00:00 - Intro
So this one of GKTwo?
Affiliate link doesn't work for me 😢, clicked others and are fine 😞
Wait, what?! Does an expert like you still go with crazy bottom layer times like 27-35secs or was it just a default setting?
If I have one pet peeve when it comes to resin printing it's people using way longer exposure times than they need. I speculate you fry your screen faster this way, too. Not because the extra mins are anything in the greater scheme of a multiple hour print but because you may be putting a whole lot more heat into the screen.
I have yet to have a "bed adhesion" failure on my old, trusty Anycubic 4K Mono and my bottom expos are ~x5 the regular exposure time. Meaning I am often at just 10-12 secs and only four layers. And nope, I didn't come up with this, smarter people did, but it simply works.
Besides that, great review. I am hoping the tilting mech can also help resins with heavy die or ceramic particles, etc in them to not settle out so fast. On long prints, this is sometimes an issue. So, maybe the swirling will keep the particles suspended better but at least the faster print time will help.
Where did you get that light from?? Wanting to add one to mine and that looks like a decent setup, although I'd rather it was a smart light.
@@Topless_Stang it's not the best choice IMO, I use them for Lighting effects on videos amzn.to/3UsPXF7
Just get an LED light with a power witch to turn it off.
that;s what i used now, but instead of a power switch, I just plug it into the printers USB port that I don't use....
Saturn 4 Ultra Pro will add a heater or a carbon filter, but will not be released for another 6 months when everyone already bought this one.
Just buy the accessory heater?
How do you connect the accessory heater? There is no usb inside the printer and as far as I know there is no hole you can get a cable through.
@@patrickhentschke6542there's a 30mm fan hole on the back you could use?
@@patrickhentschke6542
Идиот, что тебе мешает просверлить отверстие в крыш?
@@patrickhentschke6542 I was being sarcastic. It would be a rerelease of the whole system but with those added features. Like the Saturn 4 Ultra has the tilt but the Saturn 4 do not have the vat tilt. If you follow the releases of 3D printing machines you might get my sarcastic joke.
Thank you for your detailed review. Your videos have helped inform my decision making with 3D printing more than anyone's and I've went ahead and pre-ordered my Saturn 4 Ultra.
Ordered my sat4 ultra day one. As a generation 1 Saturn owner, I’m sure I’ll be impressed by this one and relieved your review was mostly positive😅! Thanks and looking forward for more to come!
thanks Ross I'm just starting with 3d printing the ultra 4 will be my first printer. I checked a lot of videos but yours are great and easy to understand. greetings Pieter
I really liked this review. You said your overall opinion first, then went into details and the small things they could improve.
Convinced me. Just ordered. Thanks for the amazing videos.
Been waiting for this video!
Thank you for going into such great detail on all of the features. I am super excited for this machine. I think it’s a perfect option for a mid range printer for people jumping into the hobby, it has so many quality features for its price!
Great video as always Ross!
Love seeing the comments on Uncle Jessy’s video about him saying “Fox” Hammer 😂 Made my morning
So glad you made this video. I ordered my own and am waiting on it now...
Wow, Ross, this is the most complete review about the Saturn 4 Ultra. I loved watching it. Congrats man! AND you opened it!!!! I almost did it, but I was already so late to finish the video. I am glad you took even more time and actually opened it. I am also happy you talked about the grip when holding the Build Plate - I sent a message about it to Elegoo. Let’s see if they’ll have time to do something about it… otherwise, I will create yet another MOD for the printer. Oh, I didn’t test, but maybe it is possible to manually adjust the actual pressure of each corner, tightening the springy screws.
Thanks so much brother, I watched your video earlier today, I think I put a comment. Really nice review end nice handle. Did you by chance release those STL files for others to use. That would be awesome.
But thanks for another great video from you too. This one is impressing so many people and it deserves its praise no end
As much as it would be nice for them to have had a knurled Surface to hold the build plate surely just get some grip tape for a skateboard or some sticky back 120 grit paper and put that on?
Looks like I have new toy in the near future! 😮
As always thank ypu for the awesome review and the 5th element reference at the end!
Just ordered. Thanks for the review. It's my first printer and I'd very much like an in depth guide please!
I was expecting this ! Great day !!
I pulled the trigger during your live at launch! Going to be my first resin printer yay! Nice review once again!
Same mate, but my second printer. I've got a mars 3 and love it but I want to print larger projects and the larger build plate has been something I've been looking at for a while. Nearly bought a Saturn 3 last launch but was poor at the time 😂
same here... I was literally starting reasearch on what to buy... and the next day this was released - instant buy^^
LOL, it seems I was not the only one convinced to by one of these.
Hahaha nope, I think we all raid the website. I think Ross is going to have a nice check soon 😂
Solid reference at the end there.
been wanting to get Fifth Element in for a while
I got a few screenshots of the printer for the, uh, archives.
One next interaction. 1) Handle 2) Easy removal of lid without unscrewing anything, just pressing to release 3) Front removal without screws 4) any leak protection inside to catch leaking resin thru the gap. 4) Easy replacement for films by just replacing plastic module so it can take few seconds 5) bigger screen with adjustable position
I will be using your link when i order mine.
Awesome video as always Ross!!! Great Quality!! Honestly, I'm not able to decide if I should get this or the GK2, which one would you recommend me?
Thank you very much Ross. Great Review 👍 Would you still go with the Uniforation GKtwo or with the new Saturn 4 Ultra?
It's awesome that the Calibration mode allows you to specifically set the time, rather than them deciding what the steps will be for you. That allows you a Binary (Quintinary, actually) Search for dialing in a new resin. For example, if consensus is that the optimum print time is somewhere between 3.7 and 4.1, you can do as follows:
Print 1: 3.5, 3.75, 4.0, 4.25
--Two Best: 3.75 & 4.0
Print 2: 3.8, 3.85, 3.9, 3.95
--Two best: 3.95, 4.0
Print 3: 3.96, 3.97, 3.98, 3.99
--Two best: 3.96, 3.97
Print 4: 3.962, 3.964, 3.966, 3.968
--Two best: ????
With _one_ more print, splitting the difference between the two best from print 4, and you've dialed in the perfect print time for that resin to the maximum precision in Chitubox.
Plus, if one of the earlier prints was "perfect" from your perspective, then you're done.
Add in some sort of resin temperature control, and you should have effectively perfect prints every time with only _four_ test prints total.
They disabled this feature on the Saturn 4 (not ultra)
@@matts8023 ...why would they do that? Are the margins on the ultra really that much better?
@@Londubh I imagine so. Classic corporate move. Like pay to use model for a lot of cars these days - you bought the hardware but have to pay subscription to use it.
great informative review on the Saturn 4 ultra. the tilting vat seems a game changer for ease of use not having to calibrate lifting time duration/speed is brilliant.
5th element reference FTW!
Multipass!
@@FauxHammer Yea she knows its a multipass!
Also pressed buy it now using your link. Thanks Ross
Pulled the trigger during your live launch. Now counting the days until it arrives.
Just ordered one - thanks for a decent review
As I am just getting into the resin printer side of the 3D printing hobby I was just about to get the GKtwo over the Saturn 3 Ultra, however, this new model with its seeming ease of entry use makes me feel like I should go with the Saturn 4 Ultra. I wish it had that heater built in, but with the cost savings being close to 50% I can use the other monies to get a wash and cure station at the same time instead of DIYing those solutions. Thanks for the review, by the way, your lid open dimensions were exactly what I was hoping to hear as the machine will be going into a closed structure with outdoor venting. Cheers!
I was about to preorder this printer based on your review I watched a few days ago. Then I remembered affiliate links and how you deserved my click due to the sheer level of quality and effort contained in this video. So just like pikachu, I chose you and ordered it via your link.
Also I need you to outlive me so that I never have to be without your videos.
K thanks!
Wow, thankyou!!!!!! One of the kindest comments I’ve ever read!!!
@@FauxHammer Seconded. I have just decided to get into Resin printing. And luckily found your channel and will be making my decision based on your reviews and will make sure to use your affiliate links.
I may have to look at this as my upcoming upgrade.
Getting this for my birthday present to myself in August. When I started printing a couple of years ago your videos helped me come to a decision on which machine to go. If the link still works in August, ill be using it!
I like that you are honest here, this is the best saturn 4 review in the internet (until your next review).
Enough nice word, some points I am interested, if there will be a more in depth video.
1. Does the tilt mechanism make a huge difference, a super thin supports possible.
2. Can you talk more about the "auto level", can I ajust the screws or change the higt of the plattform?
3. Do you think, than its possible to use a flexplate (I know, you dont like them, you cann and will probably skip this question)
Thank you
Great video, Ross, as always. You do make the best 3D printer reviews on CZcams. Can't wait for the Sonic Mighty Revo as a comparison now, though I doubt it can compete!
thanks so much mate, I put my all into this one as it is an important one.
Mighty Revo should be about a week. Review is written just need to record tomorrow then edit
Great review Ross for the money and the features you mentioned this sure is worth having a second look. Curious to see if those mini heaters are efficient or worthless and it would of been nice if the lift up cover would of had the hinges in a more functioning position as to allow the cover to be raised up and not pass beyond the back of the printer especially for those with limited space. I don't know if someone has shown the true leveling of the bed to the vat but that would be interesting to see also. I will be on the look out for your next review on this printer, thanks for your work and time.
Yeah this flip lid looks like a massive downgrade from the old lift off lid. I can easily put a lift off lid on the floor, but I can't add an extra 25cm to the depth of my work surface and print tent. I suspect I will just undo the hinge and turn it into a lift off lid :)
@@alwayswatching6318 Lol that is a great idea since I am limited in space and funds. There's a CZcamsR that has his setup in a closet and he designed some kind of hook to hang his cover on the inside of the closet door btw his printer is not this model but a little bit of brain juice and anything is possible. XD
Luv my saturn 3, holding off on based on your review
Great review! :) I pre-ordered an S4U recently so it's nice to see a positive look at it.
I see Anycubic have just announced the Mono 7 with a heated vat, a resin pump, a 14k screen (for whatever that's worth) and they've increased the Z height so the build volume is on a par or maybe slightly better than this. Of course they don't have the tilting vat and in the UK it'll be significantly more expensive than the S4U.
anycubic has the worst customer service in the industry
Great review, does the lid let out resin smells?
Hopefully not a stupid question but does the tilt function allow for the flat surfaces of a print to be set at less of an angle to the build plate or even set on it?
Great review, thank you! So...between the GKTwo and the Saturn 4 ultra...all other things being equal and cost not being a factor, which would you choose? Also, for some unclear reason, I tend to get consistent suction/peel force related failures, despite my long bottom layer exposure times and releveling. So the peel away tech of this new printer has massive appeal. Any hopes of seeing this tech surface on the next Uniformation printer? Or not needful because of other factors inherent in the GKTwo?
Please start comparing printers to the GK Two and similar. I know they compete in difference price brackets but in this case the speed could be a real deciding factor between the two. How does the print speed of the GK Two compare to this printer?
I appreciate having the heater and carbon filter as an optional extra, as I print in enclosures with heaters and extraction external to the printer, and i can't be the only one!. I think it makes sense to add those items if you need them as people like me would be put off paying a higher price for these features.
Same. Personally, the carbon filter does absolutely nothing for me. I have an extraction fan hooked up to the back too which on paper should be more than enough but I think the machine (Saturn 2 in this case) just isn't airtight as I need to it be. Without a respirator I can always smell it if I'm in the same room and if I'm there for even 5-10 minutes my throat gets scratchy in a way I've never experienced.
Similar story for the heater. Heating the vat instead of the air made more sense to me so I was always going to go DIY.
Agreed. I don't need a heater at all. So I'd prefer to not pay for something I don't need. I wish they'd to that with all the extras that not everyone wants, and just keep the price low as it can be... like the AI camera, I don't care about that at all.
Same here, heat isn’t an issue for me and 400$ for a built in one is a deal breaker. Saturn 3 user patiently waiting on this gem to expand my output
Florida man says don't heater me bruh.
How's the seal on lid regarding resin fumes? I have a Mars 4 9k and the lid does a great job keeping the fumes inside when not in use.
Tilt releases seems to me not only good for speed, but also for suction cups.. better releasing, and more stability on the axis when a print is a geometrical directly on the build plate kind of prints..
cool and interesting review! I liked how indepth and technical it was, but i would suggest to cut down on the stock reaction clips. They are too long and don't add anything but interrupt the flow of your visual narration, maybe add them in an overlay over actual footage if you must.
We keep them to a minimum, there’s genuinely nothing that works better here
can you test how saturn 4 ultra would print a flexible resin? those resins require higher lift distances while printing so I'm really curious how, if at all, they would print with this tilting mechanism 🤔
Ross, this really is the best Saturn 4 Ultra review I have seen. I am a bit skeptical about the lack of speed options in the slicer and just Slow/Fast in the printer. I agree that the tilt helps so much with peel forces. This is great for beginners. But more advanced users should be able to experiment with even faster options. Hopefully, an option can be made as firmware update.
I was also surprised you didn't mention that a handle would be helpful. I saw you lift the lid with your pinky which is great. And then I thought that I would have a whole bunch of fingerprints all over the front.
I honestly don;t see the lack of a handle as an issue. it;s why i included that part, if you listen to the audio at that bit you can tell i added in the audio afterwards
Good to know that there is not an app for the remote camera monitoring, and I agree that that would have made it easier, since for me remote monitoring would involve me not being at the house while it prints.
Great Video!
Ross! thanks for another printer review! thanks to your effort I was able to get a uniformation gk2 earlier! (is it still good?) but I could really use some resin suggestion help! please help ross!! 1/6 1/4 scale models is what im currently messing around with! (you did mention Phrozen Aqua Hyperfine! Im just nervous to get started)
Hi Ross, thanks for the video, I was now curious to see how it handles light support, or even very light supports, with this innovative way making the levels. And another thing I'm curious about is if the temperature affects it less then the normal way of printing, of course the best is to have the right temperature, but would be nice to see if this printer is less affected then the others due to this new mechanics.
Really interested in the review of the upcoming heater.
Forget not, the Prusa Sl1S had a tilting vat too.
Though I don't know about the inside workings.
Kudos to Elegoo for some very big innovations with the Saturn 4. I was very close to picking this up, but the lack of a vat heater makes it a pass for me. Specifically, the design of this tank will make it very hard to get a vat-band around (off the shelf fermentation bands will not fit). I print in a garage that gets down to 10C and a chamber heater cannot warm the system up fast/efficiently enough to be practical for me.
There it is! I'm hyped :)
Sorry to have kept you waiting.
@@FauxHammer Dude, no! I didn't mean it like that :) As I said, you're just doing the best reviews and I've been hyped for your opinion on this one! We all know you're working very hard!
@@robse1002 No no, it's fine, I am genuinely just sorry this has taken so long. to you and everyone! I assume now you've seen how much has gone into this one. It is a milestone product and I wanted to get it right rather than rush it out to be "first" with a review.
So while i am glad they added a tilting mechanism it is hardly a new mechanism for this generation and more new to this size at this price. The Prusa SL1S Speed had this feature. It was also $2000 for a small format printer so there is that. A lot of your criticisms are valid. But I really don't want heated vats by default. Not everyone needs them not everyone wants them. Not to mention chamber temperature also affects the print. The Elegoo heater looks promising since it addresses the biggest problem with chamber heaters. But blowing air up rather than toward the build plate a lot of the problems with blowing resin should be mitigated.
Seems like the only aspect of this thing that I'm not thrilled about is the gap above the build plate that makes it harder to scrape resin off. Otherwise, that looks fantastic!
same here. I wonder what could we do do make this better?
@@stefanhaupt4947 whip our you Bambu and print a shroud! I suspect one will be available soon.
This is really cool. I like the speed and the detail of it. I don't really like the potential for disaster from the unprotected screen. I've lost screens before due to resin leaking under the tape seal and I don't relish having to replace a screen in something with a tilt mechanism. That said, if they do the same with a Mars ultra later this year, I'll probably be on board.
Tilt release mechanism came around on Prusa SL-1 couple years ago , good video 👏
Formlabs in 2012 used the same system for the Form 1and drop that system in next model Form 2.
Tilt releases aren't new, they go way back, they're just new for consumer printers. The SL1S starts at $1700.
hello between this one and the future m7 Pro from anycubic, which one would you choose? Because I'm very hesitant :)
very good video by the way :)
What would you choose between this and Anycubic M5s-Pro? 🙏😊
Is the speed upgrade with the 4 ultra really worth losing build height and being more drippy than the 3 ultra
Prusa was the company that released a resin printer with a tilting vat initially I think. But it does seem like a cool feature
Hey Ross, kinda off topic, but I wiil say it again, I tried your resin and it's superb!
Much much better compared to anycubic WW+, I just hope that it doesn't crack as people say waterwashable resins do, even tho I'm printing models that I prime and paint with lacquers...
Esta impresora es tan rápida como la saturn 3 ultra?, y para imprimir rápido también necesita resina especial para alta velocidad?
the s3u had a glass screen protector, if you try and scratch the corner of the screen with a craft knife or something and it doesn't scratch then it's glass so it must be a screen protector, if it scratches then it could be a plastic protector but more likely just no protector. Also, an overlooked feature of the tilting vat is that it will keep the resin mixed much more which is great for long prints (well it would be if the vat was big enough to fit more resin, m3 premium vat is a godsend) or resins that seperate a lot.
2:20 that bolt on the lid, if you tighten it does the lid have more friction? I made a lid mod for my saturn 1 using hinges from a monitor that I could adjust the friction on by tightening a bolt, and I've recently made a 3d printed hinge that works just the same, when I get around to it I will mod my m3 premium and saturn 3u with the printed hinge and share how I did it
@FauxHammer Great review!!! Gonna upgrade from my Anycubic Photon M3!! This is an amazing printer!
Also what Gundam video is that at the start of the video?
thanks, it;s not a Gundam video. It's one of the sci fi intro's that CZcams lets me select for premieres czcams.com/video/knZMckAz3lE/video.html
here's 10 minutes of it.
So cool but also pointless. onc eof the best anime sequence ever tho
Thanks for your help - Alex
WOW! Thank you so much Alex!!!!!
So do you actually level the plate or no? I mean, any screws need loosening/tightening?
I bet the rocking vat would even be helpful with keeping super pigment dense resins like Fast Navy Grey from separating at least a little longer.
And on other miniature agnostic gaming, Forbidden Psalm, Hobgoblin, and Reign in Hell are all really good.
I love your videos, and i am going to start my own 3d printing journey, so i have 1 question.
If money was not a problem, would you choose Uniformation gktwo, or Elegoo Saturn 4 Ultra??
Depends. Am I printing in my garage? If so, GKTWO.
Am I printing in a print farm? Also possibly GKTwo, because of the easily replaceable screen.
Am I printing in a room with constant heating? Saturn 4 Ultra
I also need to consider the lifespan of the gk2 nowadays
@@FauxHammer What do you mean by the lifespan.?
I am going to print in my insulated garage, and to be total honest, I have already ordered the GKtwo.
I was just trying to find out if i should cancel my order, and go for the Saturn 4 ultra. 😅
I fear buyers remorse.
Ross, I did it. I pre Ordered the Saturn Ultra 4 with your link but now I need some advice. What do I do with my old Anycubic Mono X with a burnt out screen lol. It’s not worth the cost to replace the screen in my opinion and I don’t want to a ship it anywhere due to cost. Thrift shop I guess? Or maybe recycle the UV light for a new post process curing box? What would you do?
I’m curious about one thing, seeing that the ultra 3 which is what I own and this are essentially using the same internals, will the 3 ultra get this resin calibration capability in a firmware update possibly? Or maybe it has and I did not realize or update it yet, I don’t update when I have it working perfectly with PFA film, firth thing that was done when I received it.
hey quick question. I have never had a resin printer before, and all the talk or the air purifiers scares me a little bit. If i got a printer, id mainly have to keep it in my bedroom. So, how good are the elegoo filters? Would it be ok for me just to use 1, or 2, of the USB filter sticks (not sure which printer ill get, might help decide)? would the mars mate filter be ok? or would the only real solution for to get one that filters everything outside through a hose, through my window. i was planning on getting either the saturn 3 or the ultra version, but if the saturn 4 series will have an external port for this, maybe that would be a better fit.
i wouldn't print very often either, maybe once a week at most, if that changes anything
is it 2x faster than the saturn 3, I just bought one 1 month agow. I wonder if I should pick up a 4 ultra later? I like the tilting vat and speed, more speed less fumes?
I don’t necessarily care how my printer looks either, but I do wish it had the like green lid. I’ve pre-ordered it and can’t wait for release!
I'm binge watching your, and few other creators, videos to figure out which printer I should buy. For upgrading 1:64 and 1:43 model cars. So I will print only small elements, but tricky ones like wheels with all fine details. And then is resin types question because it would be great if it could work with rubber or clear acrylic type resins. Could you advise me where I should look and what printers are with consideration? And thank you for great job you're doing. You saved me already from making mistake. YT is full of videos which are misleading and your channel is so helpful with explanations and knowledge.
You opened the printer up and mentioned it was simple to do so but how to easy is an LCD replacement?
Did the tilt mechanism help to reduce supports contact size? Thats the only thing i want to know before i buy. Everything else is good, but to me support size matters allot in my next printer as this affects time and work until finished painted model the most
So i want to ask...if it's shifting the resin in the vat that also mixes the resin to reduce the amount of separation of the resin??
Fantastic review Ross! I’ve just purchased the M5S Pro and haven’t even used it yet. But this video has given me serious FOMO. Is it worth selling the M5S Pro and buy the Saturn 4 Ultra? Only reason I bought the M5S Pro was the heater!
Do you know the power of the light source? I feel like that is going to start becoming a distinguishing feature as qol catches up across the board.
tempted to pick this one up. the peel forces on my jupiter are just a pain to manage, this may solve that at the expense of a smaller print area.
Check the review when it’s out, I think it may push you over the edge
Upgrading from a Saturn S, it’s just time, and the convenience factors are big enough for me that the time savings alone will be worth it.
how do you ensure that the print has separated from the fep if you can't adjust the lift height?
Ok, I was about to buy the GK Two. Should I get this instead? Is the print quality better than the Uniformation?
Absolute no-brainer, this S4U is far, far superior in every way, and worse in no way, while costing about half the price of a GK2.
I never liked Elegoo, but credit where credit is due, they did this one right from what it seems now.
Doing it, finally going to upgrade from my gen 1 mars.
Me too mate! what a gap!
Ok. Now you got a good review
How does the stack up against the gk2?
I have seen feature requests on the prusa platform to enable switching off the tilting. Reason: as the tilting force is not perpendicular, the parts tend to warp. Is this likely to be an issue? If so, I would suggest a printer with two tilting mechanisms, one on each side, so the tilting could be done alternatively front-down and back-down, to even that out. Would not even be much more expensive imo.
That plate gap is a deal breaker for me as a print shop owner. Trying to make sure I don’t drip resin from a dozen printers with a silly gap like that is just a no-go for me.
Womp womp
you can still buy the S3U or S4
I have very probably seen a big problem. At 19:12 you can see how the spring at the front right relaxes when the tank is lowered and is compressed again when the tank is raised. So the LCD is pressing on the model.
I think that’s just the bed raising. If this were pressing on the model, I’m sure I would have seen issues
Saturn 4 ultra with the $50 elegoo mini heater or the gktwo for printing my own stuff? Also new to printing.
This is certainly enough to get my attention, but there are still questions unanswered about the new features that would benefit from a deeper review.
kind of dumb question, does the resin tray from the 4, fit in other Saturn series? because i want that built in pour spout
Would you recommend this or the UniFormation GKtwo
This looks absolutely great. Little bit of buyers remorse on the 3 Ultra now. Although, noticing how much of a factor temperature is, i dont plan on upgrading until thats addressed.
Yeah, I mean you still have an amazing printer. and don't forget that these don't even start shipping until June!
Wich one is the best between anycubic m7 pro and elegoo saturn 4 ultra?
So is it better with the heater than the uniformation gktwo?
Hi @fauxHammer thank you for your work and your review. Do have plan a review of the Phrozen Revo ?
Already done sir, just editing now
@@FauxHammer you're the best so existed to this and to compare with the saturn 4. All the best from Paris :)
Great review. Nice reference to 5th element. 😂
Right now I have Mars3 Pro which is printing fine. But I have huge urge to upgrade it to Saturn 4 Ultra but still in back of my head is that that in 1year we will get even better printer so Im not sure If I should wait or give it a try. Nice video as always!
Ross, how does printing reliability compares to regular up and down printer ? can you skip out on supports ? Is there less artifacts / defects when it comes to standard type printer ?
Also, tilt release mechanism came around on Prusa SL-1 couple years ago... though that was a $2K printer with tiny build volume
yeah, this made Tilting release cool!
it holds up fine, I haven't had a single issue on this machine and I have now printed nearly 50 FauxHammer models for UKGE!
@@FauxHammer Very cool ! How would you compare it to a GK two ? I know they are different printers, and one has built in heater ... but print reliability wise how would you compare them ? (I have GKtwo and 8K mini currently and Saturn 4 Ultra on order)
The tilt mechanism including the motor on the S4U is clearly done right, very robust for sure.