SPRAY PAINTING My Wrecked Miata!?
Vložit
- čas přidán 25. 04. 2024
- Next on our DIY journey, I'm putting spray paint to the ultimate test on my wrecked Miata build. Is it possible to spray paint an ENTIRE car? Check out SprayMax's products at my Amazon storefront under the DIY Bodywork and Paint folder (Amazon Store Front: www.amazon.com/shop/evanshanks)
➥ MERCH fivethreesupply.com
➥ PODCAST @ShanksCast
➥ / evanshanks
➥ / evanshanks
Codes and links:
Amazon Store Front: www.amazon.com/shop/evanshanks
Helix helixsleep.com/evanshanks
PO BOX (send me stuff): 📪
P.O. Box 1297 102 E Broad St. Forney, TX 75126
MUSIC:
#Cars #EvanShanks #Shanks #spraypaint #diy #carpaint #miata - Auta a dopravní prostředky
Shop my Amazon storefront for all the DIY things! www.amazon.com/shop/evanshanks
Being a youtuber you'd get a deal on the respray but out of curiosity how much would it cost normally to do what you done
dually noted
. dont speel check lol
Picasso I like it
When is the next collab?
Haha good one teej
Stfu tj before I come tickle you
Little tip, if you warm up the cans before spraying with some warm water, they’ll spray a bit better than cold. I’ve painted a couple civics with rattle can myself 😅
I knew this was a plastidip thing
you could also put Some forced air in the can itself to Put some more pressure in it
Did this with primer. Left the cans in my car to basically bake for a hour and then got to work.
16:04 she literally has your whole face 🤣. Loved the reaction
Gabriela's reaction was great😊
Daughter is so cute... enjoy your time with them because it goes so fast
Just a tip! Im an automotive painter, A lot of colors like a ground coat. it helps the color cover easier and faster, reds and blues specifically. i dont know how far apart the epoxy and paint coats were. painted a Chrysler Tricoat today that used a very light ground coat before the red which also lightens the color! Very impressed with the rattle can! Color looks awesome!
I really wish your channel didn't drop off. You deserve popularity lol. Love you Evan!!
I love this series. I painted my car with Rust-Oleum turbo spray cans. Did a lot of wet sanding and polishing after and it came out fantastic. Keep up the hard work.
Be honest, how tired is that finger? 😂
I literally can’t wait for the correction and polish video!
😂😂😂😂😂😂 the ending with your lil ladies reaction...priceless😢. May God keep you and your family and continually bless you in the name of Jesus, amen.
The paint job came out excellent, with a wet sand/buff n polish it will look like a professional job. Thank you for showing the process in normal speed, I painted a hood in black and it came out terrible but after looking at the way you do it, it’s because I was painting too fast.
Rattle canned my e36 with purple matt, no prep light 320 sand and wipe with alcohol before. I did it outside. Result are really good for drift missle 😅
Came out pretty nice man! And Gabbys reaction was percect lol keep up the great work 😊
Love that reaction!
Heck yea that turned out amazing
Hell yeah dude!
LOVE THE COLOR
Actually looks quite nice 🔥🔥
yellow helll yeahhhh!!! that lil things gonna look so sickkk🔥
Great job on the car Evan, looks great!
Nice paint job looks good..... your daughter's response to the yellow was heart warming made me smile... have a great day
Looks good
i love this kind of video, please doin it more often on the channel
Love you Evan. Love the content. Love your family 💙 keep it up 🔥💯😎
Yes 🙌 we back baby 💯🍻
Love your videos Evan shanks 😊
I’m glad this video is longer if appreciat it if all the videos could be a bit longer I’m sure a few ppl will agree with me😅just really enjoy watching your content Evan keep up the great work🫶🏼
Baby girl’s reaction was priceless 👍🏾💯
Yo that color fits really good with the car!
Dude not for nothing it came out pretty good. And lil gabby reaction 💛💛💛💛
I used to work at Napa and mixed paint for a while , Than started flipping cars and used base coat rattle can with 2k clear after and always looked perfect , Prep is the most important
Damn i was skeptical of those bmw fenders but it actually looks so good
whaaaaaat? thats dope
Shoulda used one of those super cans or mega cans---whatever they call em... Like 18" tall, and spectacular coverage. EDIT: OMG the little ones reaction! Awesome, may God bless!
Excited to See how it looks after wet sanding. Good job
this came out great man! love the color choice ! of course i'm bias LOL
Try going wetter! Those little spots are what’s called “dry spray” looks great tho!
Holy smokes!!!
Evan the music used in this video makes it a really sick episode for me❤
Where did you get the music from?😮
Love from the netherlands!
On camera, the yellow looks awesome
when i was like 16 i tried rattle can paint my first car and lets just say i would have been floored to see results even half as good as this! looks sweet beautiful color
this is swagy
His daily advice for this video is crazy for him to say in my opinion
Your daughter’s reaction said it all!😂👍
Hotboxing the painting tent I see
The whole time I was thinking...
One of these companies needs to work with Rustoleum and be able to use their Turbo cans. Those things are insanely efficient 😁👍
Spray max deff makes great products.
Needed to hear your message today brotha man
Much Enjoy. Very Thanks. 🤌🏼
A white top with white wheels would have looked sick asf
Sweeeeeeeeet!!!!
+1 for the heat. I use a map gas torch. Gotta be careful with it though. You can repressurize those cans too.
Watching this makes me want to pick up a beater and clean it up
🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥
What a great job you did I’ve done something similar recently previously I used clear coat but it wasn’t 2k when I wet sanded it it looked awful regardless of compound or buffing will it be different with 2k clear coat ?
People always say you can't achieve good paint results with a rattle can. I made sure I had a thick enough coat, used some basic painting knowledge and just DIY'ed it. Turned out great!
Would be cool to see a medal flake on the top
I can tell u spent more can then buy shop line paint base coat clear coat or single stage good job thoe
hey evan my clear coat is gone how hard would it be to repair it?
Devin used the same booth. Overspray/dust killed everything and made everything have to be worked on.
Heat the can. It makes more pressure and let's the paint flow alot better
Hey Evan, do you ever think you would mess around with the 1st gen gs300 chassis? JZS147
Whats good love the miata even though some people hate on them i want one
Notification gang!
Please wrap the hard top in the carbon fiber product from the 350z.
Notification squad
You saving oven at tea tl
Yellow Evo returns as a yellow Miata and I’m not even mad about it
Not a fan of yellow but that's a sick shade on that car
What's the cost
Been away for a bit. Wasn't that his sister's car?
Yep he start remodeling it bc his sis don't use the car and the car was just sitting
@daniel.m3257 Ah makes sense! Always loved that miata. Thanks for letting me know
I know them forearms barking
I think it looked way better before you clear coated it.
Your bumpers and side skirt is going to darker than the body of the car. Because you primered the body white and the body kit was gray.
Wrong way round, epoxy primer should be what you put on first, filler primer goes on after.
That yellow looks great on a Miata
BRO! YOU NEED A MK2 CHANNEL AND PLUG IT AND WE WILL SLOWLY MIGRATE. YOUR VIEWS ARE FUCKED LET US HELP YOU ❤
This is dope
And Jesus loves you ❤️
All that work for a rattle can job? Why not just wrap it yellow so it looks perfect love watching the videos but ur the one that said u were gonna step up the quality and finish all your builds the right way looks like a step down
Not sure what's wrong with trying something new? Definitely not half-assing this or dropping quality ❤ Check out the IS300 paint job if you want something else
Dude you gotta stop posting stuff where it’s like “I’m going to do the thing” and then you bashing on what you did wrong or why it’s not perfect. It’s depressing. This is like my motivational channel lol