Builing a Work Bench With Integrated Table Saw (DeWalt DWE7492)
Vložit
- čas přidán 28. 10. 2023
- I'm building a work table from plywood with a bunch of usefull features.
most importantly; it fits the DeWalt DWE7492. My new table saw.
The design is pretty simple so there is no excuse not to try building one for yourself ;)
I'm getting one step closer to building out my dream workshop!
Thanks for watching!
more behind the scenes:
/ sparetimeshop - Jak na to + styl
I own that table saw and know it comes with a push stick, for love of wood working please use it. Great build though, well done!
I came with two great push sticks when I was born, very convenient!
Nice and better than basic for sure.
Please use a pusher more often. You sent shivers down me back lad!
I would put those castors on all legs; it makes for easier maneuvering of table into a particular spot.
You could glue/attach a lump of wood at the user end of the sled where the saw peeks out. Don't saw right through it so you never see the saw blade at the pushing end.
Your mistakes will be my victories. Thanks for highlighting them so others don't repeat.
😮😮😮 Oh dear God will you get a push stick. Lucky to have your hands intact after the tablesaws first use. Nice job though. Looks Great.
Love the design would you have plans and cut list available for sale?
Those castors are a fantastic addition to a nicely executed project, and well done for honestly showing the mistakes you think you made.
Next time try to use more rigid tubes for the extend for the vacuum.
Rigid tubes are a lot less restrictive than flex tube.
Same thing with bends. Try to make them as flowy as possible. Try to avoid sharp turns.
That way you get much more suction power and less cleaning afterwards.
One of the best elegant and functional designs I've seen .I am considering. building this for my Dewalt saw. Has anyone built this table with the legs of the saw attached so that you could move the saw to another work site if necessary,.
Rubin, Well Done!!!! A couple of considerations:
1-Coat with an oil finish. I’m a fan of Tung Oil, food grade(it’s useful on many other things)
2-Make yourself an infeed stand to support long work when you’re ripping planks. It provides stability to your cut and eliminates that seesaw/up and down motion.
3-I’d put a round over or chamfer to the plywood top. That’ll eliminate split edges should you smack it or lift something heavy up on it.
Other wise well done
Mark
Very nicely done, Im definitely going to do a project similar to this. Just bought my first house with a garage.
You need a push stick 😮
There is one in the fence
Like the one at 20:43?
Hi Reuben,my name is Kevin and I'm impressed with the way you think. I've watched the workbench for your DeWalt table saw which is the one I have. How can I get the plans for myself. Keep up the amazing work.
You don't need a push stick when you've got fingers!! 😊
I'm glad you had enough spare time to make a new video. Inheritance Machining made a nice camera rig a while back. It might come in handy in your small shop.
Great job!
Outstanding job.
Such a nice bench! Tank you for inspiration
Great build!
Strong work!! Great build!!
Cool bench Ruben, those torsion boxes are really handy! Wish my shed was big enough to accomodate such a bench!
Looks great good job
Beautiful design and execution.
Mooi om te zien hoe je zo gepassioneerd bent met wat je doet!
Really nice work! Thanks for sharing.
Awesome design!!!
Very good bench & a good job all-round. Not to be picky but, I have the same table saw &, they are probably the best table saw available for a benchtop design however, the 2nd mistake you mention will turn into a 2 1/2 mistake with that top piece that you cut to fit the grab handle recess as, you will need to access the bottom blade guard underneath the the saw top to clear off-cut pieces out which become trapped inside the blade housing. It is easily accessible in the normal situation where the saw is mounted on a benchtop however, in your case, you will have to remove the inletted section of the bench top on the right hand side to remove the saw from the compartment to gain access to the lower blade guard.
Maybe you could consider a separate inletted piece which can be lifted out which would allow quick saw removal.
Great work. Got some ideas while building mine. 😊
Hey Ruben! Great job you did there 👍. Keep it up !
Very nice job.
Great video and table design!
And for all the ones griping about push sticks, real men don't need 'em! :D
Yep, real men don't need Fingers, either. 🤣🤣🤣
i really like that simple base design. i will be doing mine the same way along with those casters you have. also have you considered having making a infeed table infeed table that attaches to ur work bench so you dont have problems with longer pieces rocking up and down with u rip them?
I have this same saw and looking to make a new workbench for it. One question - how do you remove the riving knife in your setup?
Very nice design.
I really like your table design!! ❤
Question: can you point me in the correct direction on how to create cutting guides as what you used in this video? Also, great job. This is what i will form most of my table around
I enjoyed watching this video. It has been a while since you posted a new video, when I saw you posted this, it made me happy. Thanks for sharing this project with us. I learned a few things. Keep the videos coming.
My setup is very similar. I installed my dewalt table saw so when the fence is all the way extended, the lactch sticks past the table edge, just enough to lift. Great job.
i can cutting for pvc board too?
18mm or more?
I would love for this to be my first project. Do you know where I could buy the plans?
fantastic things
💯💯💯
Hi. Really nice work. I like this work bench. Do you have plans for it please ?
If you decide to build a workbench along the wall, make it exactly the same height as your table. You will not regret that.
Bonnes idees, merci beaucoup!
I was screaming, your hand! Your hand! Move yours hand! In the office 😂
Muito bacana ficou excelente seu projeto BANCADA PARA SERRA foi uma ótima apresentação e muito boa à demonstração valeu obrigadao muito útil valeu obrigado VALEU 🎉🎉🎉🎉
Very cool!
Thanks!
Good job
Very nice
Very nice.
gonna do something similar but much smaller, nice table
Great work! I have the same saw and will be building something very similar.
Don't worry about the Safety Sallies demanding you use the push stick. Use common sense and eliminate distractions and I'm eurr you'll be fine!
Love this build! Do you have the plans for this by any chance?
Would you be willing to share your plans for this work bench?
Would love to have the plans for this bench looks great well done Arthur
I join the request, and I also agree for compensation . Great work and many thank for sharing
Would love to get the plans for this workbench. Do you have it available? Great work, great design!
I feel the same if you could share your plans for the table I would pay as well.
My shop is 16x32 and would love to have a table I can move around to make space after cutting to have room to assemble larger projects
I have the same saw and have been looking at an easy/elegant solution like this. Thanks. Have you looked at the videos for adding a soft start to the saw? It's cheap and works really well.
Nice build. I couldn't help but notice that you didn't leave any access for the living knife lever though.
I wouldn't have put screws in the end of plywood personally because it's not strong enough for me but it looks great anyway, good job
Great video and an excellent design. Do you have the plans available?
What are the dimensions of the bench ?
Do you have plans ?
Nice bench. Well done
Great little project, you did a very good job on it.
Do you know how many hours were spent building it?
Safety Safety Safety!!
Such an inspiring video! Love the possibility of roling it aside and free up some more floor space. How thick are the plywood plates?
Yoooo use a push block or stick, and lose the long sleeves before you lose fingers! Otherwise that's a nice build!
I'm going to be building my own bench soon and I'm jealous you have a flat floor to work from. My garage\shop floor is a mess and can't be used as a reference for anything! A few comments \suggestions:
-- you may want to double or reinforce the plywood beneath the dogholes so the hole tools have more surface to push against.
-- was there a reason you centered the saw in the table? It seems that having more room on the blade side would be helpful when using a sled or cutting wider stock?
-- when doing the rails along the sides it looks like making them flush with the table top can help when pieces need to be clamped vertically to the table top.
-- at some point in the future are you considering adding a bench vise or other clamp?
I have a bunch of left over construction plywood that I'm going to laminate for my build as well and I wish you many happy years with your new table!
Inspired by your video, I built a large bench for my DWE 745. I found I needed an infeed table. But now I have to reach to turn the saw on and off. Do you know of any way to add a remote switch?
Any plans for that table . I like the idea
Amazing build. Do you have plans? Thanks
Very nice design; simple and so useful...!
That DeWalt is nicer than my table saw...!
God bless ALL of us!
WWG1WGA
BTW, I just subscribed to your channel today, after watching the 'Stairs' video.
You seem to be a well-rounded and resourceful craftsman!
Nice!! can you share the plans?
How do I view those plans? Great build!
Hey Ruben, I am discovering your channel. Great stuff and nice to see some Belgian folks in action. I am not sure about your table saw model, but didn't you block the access of the lever that allows to remove the riving knife? 🤔
Great build 👍
Hi - great build, where can I get a copy of the plan of this workbench please?
I bought same table saw DWE7492 last week, and I'm gonna make workbench which can integrate with it. Very good reference you gave. Tks a lot. BTW, isn't there any PDF plan?
Knap gemaakt!
Zelf zou ik ook de tijd moeten vinden om dit soort werkbank te maken.
Wat heb je als hoogte voor uw werkblad genomen?
Could you tell me which blade you twiched out to, as I'm new to wood-working and I have the same table, love the videos. thank you.
Awesome built! Im planing to build the similar kind of table and Im in doubt about total height of the saw...In specs, its written that total size is 330mm, however, when I measure it, its 325mm. Now I just do not know at what point to put side surfaces and made them flash with the saw table. Any thoughts on that?
A perfect idea. Can you share the plans, and if you have the file for the 3d corner piece. Thanks for a great idea.
Do you have a link for the retractable castors ? ... Thank you, enjoyable video.
Very awesome projects...can you give the drawing plans for that table, much appreciated thanks
Beautiful job…. Thanks for such a great video.
As someone who has lost a tip of my index finger to a table saw blade…. Dude,…. Please be careful. Use a push stick more!! Watching your hands moving around that moving, open blade at your fast video playback speed, shows how close you get to that blade. Please keep your fingers!!
How does that 90 degree work? I would think it would clog up trying to make that turn. Interested to hear how it works. Please use a push block/stick. Sixty thousand table saw accidents in the US every year and about fourteen thousand of them result in amputation. Be safe and great video.
Great build 🤩 Can you share the plans?
How do I get plans for the table saw bench?
Do you have sketch-up plans for the bench?
This is.great - could you share the plans?
Nice workbench! Are you willing to share your plans?
I really like this table. How can I get the plans
hello,
i can use this tools "dewalt table saw" for cutting pvc board too?
maybe 18mm or more
How do you get plans for his table
How much would you charge for plans? Highly interested
Hello. how to get a plan for this workbench?
well i have seen better, but, it depends on what are you planing for use it for... i am not an woodworker, so i don't judge, yet i don't thing this plywood work table will serve you long....
thanks for the video, i really like it!
D9 you sell plans to this build
Are you going to share/sell your plans ?
Adapter piece and a 90° turn is really bad for airflow. Upgrade to a dust extractor that has ID of saw instead. You will upgrade later on regardless, trust me :)
do you have the plans published somewhere? Would you mind sharing / selling them?
How about getting your plans for the build.
can you provide the plans for this with the fixed mistakes??
Would it be possible to receive the plans?
The instant that I saw his hands pushing timber past the moving blade I checked out.
As if there aren't enough dangers in Woodworking without doing unnecessarily dangerous things !!!!!!!!!!!!!!
Build plans?
Plans?
I would lose so much in that table and have to swim in the middle to grab it
LOL. he says lets do some heavy lifting and then very easily proceeds to lift the entire thing.
Airflow HATES 90 degrees corners. Otherwise cool workbench