MST INTAKE V2 - The BEST intake to date! - Updated 2 Piece GR Corolla MST Cold Air Intake
Vložit
- čas přidán 19. 04. 2024
- Shop Aftermarket Performance
www.grhatch.com/ or a90partsplug.com/
MST GRC V2 Intake
speedindustry.com/v2-mst-2-pi...
GRC - Engine Cover Sticker Kit
speedindustry.com/gr-corolla-...
Follow us on all socials: @speedindustry
speedindustry.com
/ speedindustry
/ speedindustry
/ speedindustry
* All liabilities resulting from the use of these products lies solely with the purchaser/user. Please use it at your own risk.
#speedindustry #corolla #GRCorolla - Auta a dopravní prostředky
I really like the design of the shroud
That’s the coolest intake I’ve ever seen 😉
Probably the first intake for this car that actually is a good design.
This is amazing.
This is wicked. Hopefully pricing won't be too high.
Pricing is on our site :)
Wow this looks solid. Any chance for a Dyno run with the new intake?
Definitely interested! I already have the V1 intake so I really hope theres and uograde kit
There will not be - The only part that is the same is the rear tube , better option is to sell what you have complete so someone can use it and DM us for a loyal customer purchase
When installing it everything worked fine, no code?
Does it come with the pcv pipe?
Careful to not over tighten the hex bolts. Did that for my sxth and cracked the plexi. I did add some thread locker and some rubber washers and backed them 1/3-1/2 turn.
great tip for everyone
Good ol back off a quarter turn 😂
When are these expected to start shipping?
Boy, I wish they had something like this for the 2019-2022 Non-Aspirated Corolla XSE Hatchback, 6 Spd. M/T, w/the 2.0L engine.
I considered buying a new GF, but w/interest rates so high, I said forget about it, at least for now.
❤❤❤
Sound better than the first version
It's DEEP
What are the hp gains..??
DM’d the IG page just now 😂
got ya added to the list
Can this be an add on to existing mst intake or do I have to buy the entire kit? It looks like the same intake pipe and filter. But the box and induction look amazing
We can see if there is an upgade option - Great idea
@@Speedindustry I’ll shoot Alex a message and talk to him about it. I deal with you guys for most all my mods. Alex is a great guy. You guys always have speedy shipping and great service. Best speed shop online I’ve ever dealt with. Always recommend you guys!
@@andrewstevens7205 Thanks for the kind words
As long as the pcv code stays away. I like this setup. Is it available with a complete turbo inlet?
TBD
It looks promising
CARB compliant?
Damn that’s nice but I already have the Forge one..
Sell it - hahah
So do u need a tune for this intake I know the mst says u don’t but I see videos all over CZcams with cel codes?
I've been wondering the same thing. Can't think to help that it probably will, but hoping there is one we can drop in without a tune.
@@BigMeechEJ25 So if you're getting the m. Yes. TV one, there's a suction cup hose you can buy and the. MS V-2, there's a little coupler. You can buy, and that'll keep the cell code away
How does this compare to eventuri ??
See my comment below or watch one of our earlier vids - if you want that carbon look-- well then.. If you want an OEM finish look, Then MST is the clear choice -- Both solid products
Damn I want to by the gr corolla…. But I need the Sienna first guys meh lol 😂
Did changing to that intake give you a code?
NO
Ask any great tuner, back pressure is not something you want any of with a Turbo car. you want to evacuate any and all pressure past the turbo; larger the orifice the better,. The "oomph" lost is typical of adding an intake and highflow exhaust as it changes the power band and pick up through out the rev range. The GR ECU will learn to use these mods, but a tune is the real way to optimize in order to reduce the change in "oomph" you describe.
Compared to Eventuri??
Different concept and look, they are both so different but also both similar bringing fresh air in from the front.
probably still needs a tune
I’ll stick with my SXTH
Dyno it
So basically another CLOSED in a box filter. 900$ !!! 😳 The stock also in a box, just change the filter to performance type and you have the SAME effect and sound for less then 80$.
Eventuri is the only one I’ve seen with any beneficial differences
Stock box has a bottom flap that restricts airflow below 4k rpm. So this would be an upgrade over that. I wouldn't recommend running a less-restrictive "performance" filter that would just let in larger particulates to a high-strung turbo engine.
All that and still no fix for the CEL? What a joke.
That is not a factual statement. They have worked hard on this and there was not and should be NO CEL with this intake
Either way, the crankcase parameters are super strict from Toyotas factory tune, if you’re gonna mod the car, you’re only really gonna see a difference in everything thrown in through a tune like ecutek with graham from boostin performance. Otherwise, keep it stock