How to replace a Moen 1222 shower faucet cartridge
Vložit
- čas přidán 14. 07. 2024
- This video will walk you through step by step on how to replace a Moen single knob faucet.
#Moen
How to remove a stuck Moen Cartridge • WATCH THIS!!! if you h...
Replacement Cartridge: (this is for my particular Moen shower)
geni.us/Uay7K (amazon)
Commercial Heavy-Duty Cartridge
geni.us/wiAq100 (amazon)
Moen Cartridge Puller:
geni.us/iEAfOA (amazon)
You can also find the puller at Home Depot they have on their website for $49 but when I went to the store it was only $12.
Top 5 Bathroom Accessories
Make soap easier
geni.us/OB0iFjt (amazon)
No more spills
geni.us/AkJWbCj (amazon)
Have a wonderful shower
geni.us/vPkSuqn (amazon)
No more smells
geni.us/sY3sb (amazon)
You know you need one
geni.us/LLE6 (amazon)
Check out my other home repair videos • DIY
If you need help schedule some time with me - calendar.app.google/EWy8C2iZM...
Support the channel by using this link to buy from Amazon: geni.us/NHVyeT (amazon)
Try Amazon Prime FREE for 30 Days: geni.us/NWAd (amazon)
Check out my storefront www.amazon.com/shop/hindsight101
If you feel like this video helped you, consider buying me a cup of coffee?
www.buymeacoffee.com/Hindsigh...
Gear I use for videos: kit.co/Hindsight101
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
00:00 - Needed Tools
00:16 - Intro
00:27 - Shower handle removal
02:40 - Moen cartridge removal
04:49 - Moen cartridge install
07:25 - Shower handle reassembly
Channel description:
Ever say to yourself "I wish I would have known that earlier". Well my site tackles that question, from experiences I've gained in everyday life. Things such as buying a TV, fashion for the workplace, leasing a car and much more. This is an open forum where you can ask questions and hopefully learn from my experiences and from my closest colleagues.
I may earn a small commission for my endorsement, recommendation, testimonial, and/or link to any products or services from this website. As an Amazon Associate, I earn from qualifying purchases. Your purchase helps support content made for this channel.
SEND ME MAIL AND STUFF
Hindsight 101
5801 Postal Rd 81689
Cleveland, OH 44181
Derrick@hindsight101.com
Disclaimer: Due to factors beyond the control of Hindsight 101, I cannot guarantee against improper use or unauthorized modifications of this information. Hindsight 101 assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Hindsight 101 recommends safe practices when working on machines and or with tools seen or implied in this video. Due to factors beyond the control of Hindsight 101, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Hindsight 101. - Jak na to + styl
Check out my other home maintenance videos bit.ly/2mxYnOQ
maybe you can help me with something, a few months ago I put a single lever of those moen but it turns out that when I turn it on, water comes out from below and also a little above, maybe I put it wrong because it is the first time with that work you could tell me that I did wrong please?
You could have possible put it in the wrong way but not sure
@@Hindsight101 pop
My cartridge still will not move
czcams.com/video/T4NIAiSkl3w/video.html try this video. Also some people say applying heat to the cartridge helps
This is by far and away the best how to video I have ever seen and used on the net. No fluff, no filler, shot well, great angles views etc. Bravo my man. Thank you for this video.
Thanks for the comment
After watching about 15 different videos on this subject, you are the only one who mentions having the bottom of the cartridge flush to prevent leaks. Thank you
No problem glad to help
How important is it to flush that out ? I installed one today and I might of pushed it in too , and It was leaking bad. Just wondering if that is a key step ?
@@can2jmoney yes, it’s exactly what happened to me. Ended up destroying the new cartirdge trying to get it back out. Sadly it’s not mentioned in any detail in the instructions the cartridge comes with.
Exactly. The explanation at the 7 minute mark is key.
This comment and video saved me
Thank you for your video tutorial. I am a busy, single woman whose shower would not turn off on a Saturday night. I watched your video, then rushed to Home Depot 45 minutes before they closed. I worked on the steps and got stuck on pulling out the cartridge. That night, I ordered a puller from Amazon and it arrived Sunday afternoon. I continued to follow your instructions. It took a while to remove the cartridge, but I remembered your instructions about being patient with this step in removing the cartridge. It Worked 🎉. I continued to follow your instructions and completed the plumbing project with your instructional video. Thank you for your video.
Ronnie
That's awesome to hear. Glad it worked out
This is the best of all the Moen installation videos including the OEM.
Thank you
Okay, as a professional instructor, I really appreciate it when instruction is given clearly, step by step, and points out pitfalls - "the notch on the flat side" & "make sure the bottom is flush" - which are generally common mistakes. I often watch 3 or 4 CZcams videos when I'm trying something new. In this case, I watched 3 other videos, including the official Moen video, and NONE of those other videos pointed out the "notch" or the "flat bottom". Kuddos for an Excellent video. Definitely saved me a bunch of headaches. Thank you.
Glad it helped, in a previous job I created training material and after watching a lot of youtube videos myself I thought I could help explain thing a little better
@@Hindsight101 Well, you were right. Replacement went pretty smooth with your help. Thanks again.
I hope everyone is aware that MOEN has a lifetime warranty on its products. I have received repair parts for bath & sink faucets at no cost. And this video is top notch. I checked other on-line videos as well as the MOEN instruction sheets and video. This video covers all the little "why didn't they tell me that" issues. Good job.
I had trouble with getting the replacement neon told me I had To have the receipt. Which I heard from others you didn’t need. Also thank you very much for the comment.
how do you know which cartridge size to use?
Great tip about not pushing on the center brass piece.. That's exactly what I would have done, and then would have not known to look behind at the valve not being flush.. Thanks for a very well done video - I really appreciated the multiple view angles too..
You’re welcome
Yes!!! This is the exact tidbit I needed to know. I replaced the cartridge once and accidentally did the same thing and tried to pull it back out but didn't actually check if it was flush. After I closed everything up the shower head immediately started dripping. Know I know why and what to check. Thank you!!!
No problem
I don't have the puller, so how do I make the end piece flush?
You could use a wide clamp
This is an amazing video tutorial! The different camera angles are genius. The explanation in the voice over and editing is precise. And leaving the mistake in was excellent. Thank you so much for taking the time to do this.
Thanks glad to help
What he said!!! Thank you so much!
You're welcome
Just changed mine. No problems. I didn't need to buy the cartridge puller. Great video, excellent instructions and saved me a ton of money. Thanks 'Hindsight 101'😀
Thanks
Thank you for the video. It was more accurate and precise than the recommended Moen video.
You are welcome and thank you
By far, the best video ever!!!!! Thank you so much! It took me 12 hours (with multiple breaks) to figure out certain things before I found your video. I struggled to get the cartridge out without the puller but might end up having to purchase one. Thank you! You saved me $90 for plumbing service and I’m a proud woman for doing this all by myself. 😊
So glad it worked out, yeah I have had some cartridges come out very easy and others i had to break it into pieces to get it out.
Can’t thank you enough for the video. You’re description, clear camera work and number of cameras truly sets you apart from other “how to” vids!
Thanks again and keep up the great work
Thank you for the compliment and thanks for watching
Nicely done!
A very articulate and intelligently done video, without all the baloney and sometimes hype that other videos have.
INHO
This gentleman is very good at giving directions that indicate a well thought out presentation in advance .
One that you can easily follow and understand.
Kudos to you !!! .
Thank for the compliment
Clear and concise instructions! The "mistake" you made is something I had not seen in other videos and I am glad you pointed it out, with the right corrective measures. Great job!
Thank you glad it help
You, sir, are a credit to your profession, youtube, and the human race in general. I was pulling my hair out trying to figure out what I had done wrong when I replaced mine. In the video published by moen it says to turn the brass part to the off position before reattaching everything, which screwed everything up. Your video left it in the on position, and that was what worked for me. Thanks for the awesome video!
Thanks so much for your comment. So glad it worked out.
Agree. I don't know why the Meon company video tells you to turn the brass valve from notch at the top to notch at the bottom and then to install the handle. That does not work at all.
my husband followed your video, he was very impressed that you made it so clear and easy to follow. Well done.
Glad I could help thank you for the feedback
Easy clear and precise. It's exactly the kind of diy video I needed to have enough confidence to get the job done. Thank you so much
You’re welcome thank you for the feedbacks
Donna Vice how did it go? I'm afraid to try the cartridge (valve)!
Thank you for this. After 16 years of hard water, mine was a bit more difficult to remove. Your instructions were spot on!
Yeah I just moved and had to replace mine and it took an hour to get mine out. Thanks for watching
Your instructions were written exactly for me. I was going to call a plumber and after watching your video, I decided to give it a try. I bought the cartridge and the tool and with iPad in hand I followed your instructions step by step. All went well and. I saved a couple of Benjamin’s in the process. Thanks very much.
Thank you for the feedback glad I could help
SO glad you included the mistake, because I did the same thing and was wondering why it was leaking everywhere!
I’m happy the video helped thanks for watching
This is an excellent instructional video. Replacing the cartridge was one of our smoothest home maintenance repairs yet thanks to the step-by-step instructions and multiple camera angles. Thank you!
Thank so much
I just had to write you to let you know that you saved me a rather expensive plumber service call to replace a $45 part. Thank you, thank you for this video. I had created quite the situation for myself and this video was INSTRUMENTAL in helping me figure out what I was doing wrong and course correct, accordingly. Thank you!!
You’re welcome thanks for watching
This is the best tutorial video ever. You have done us all a great service by explaining each step and part so carefully. May the CZcams Adsense gods shine down on you!
Thank you. My only hope is that people learn from my mistakes
One of the best Video in replacing a Moen 1222 Faucet cartridge for the home owner ! THANK YOU !
Thank you for watching and the comments
You saved the day for me when I was having difficulty installing a Moen 1222 shower cartridge. Thank you!
No problem happy to help
Thank you for this video. It was very informative, easy to follow, and right to the point. No extra "fluff" like so many other videos. And as an added touch, the triple-view camera positions were very cool. I'll be checking out your other videos.
Thank you glad you liked the video
Thank you for this informative, detailed video! Great job! I also love the different camera angles used to demonstrate.
Thank you I appreciate the comment
Thank you for this video. I was having trouble getting the cartridge retaining clip back on, so I followed you lead and removed the faceplate. It worked!
Happy it worked out for you. Thanks for watching.
I think this method of teaching others is the BEST. Different angles to see what is happening thru the process. Love it! Went straight to Home Depot, got my materials and off to do this. Only part I struggled with was putting the clip back in. Thanks so much for the easiest method for this!
Thank you for the comment
Thank you so much for this video!! I was able to successfully change the cartridge while my hubs was at work!! And I was able to avoid the pitfall of the misaligned cartridge base. Top notch!!
Glad it helped thanks for watching
Thank you for this detailed instruction video. I was able to fix mine within 30 mins at Friday night 11pm. Yes, it's quite difficult to pull the old cartridge out of the pipe, and originally I was not dare to pull using my full strength since I thought I may did something wrong, you words at 4:22 give me the confidence and it worked!
Happy it helped. This cartridge was much easy than others I have removed. Some I've had to break into pieces.
Excellent video! I like how you have the other cameras to show all angles for easier viewing. You made it seem so simple that I will attempt this myself. Thank you for sharing your knowledge.
My pleasure if you have questions please reach out
Great instructions and thank you for the tip on re-installing the cartridge with the tool... since I almost made the same mistake.
The old cartridge was a nightmare to remove because of the rubber seals getting caught between the plastic and copper housing! Tip: Use a little WD-40 when removing it. It helps!
Since this one I’ve had to replace a few more cartridges and they were a beast to remove
6/8/2023 THIS IS THE BEST VIDEO IF YOU DO THIS INSTALLATION! The reason is because you are the only one that explained the two (white) pieces and their relationship to get the 1222 to work correctly.
Thank you
Thank you. This was the most thorough video on this that I found. Your tip on how to ensure it's set back correctly so it doesn't leak, solved my problem.
Awesome glad to hear
Thanks for the video. It's the only one that shows exactly how it is done. You are the man.
I appreciate that!
Your video is absolutely perfect. My husband installed our cartridge incorrectly and will redo it again the right way due to your instructions. My husband pushed in the centr piece and faucet still leaking so we now know why this is happening. There are so many videos on you tube but yours is the best by far. Thank you very much
Thank you for the comment I am happy you were able to figure out your issue
The detailed description of the steps and the inclusion of the mistake were very useful. Using the cartridge puller to place the newly lubricated cartridge makes this very easy. Thank you!
You're welcome
You're welcome
Derrick, Thank you so much for this informative and excellent video. It was so easy to follow with detailed explanation for each step. I also appreciate your use of additional camera angles.....so helpful! You saved me a lot of money and I completed the repair feeling pretty proud of myself!
Awesome thanks for the comment
This is the most thorough tutorial video i saw about this cartridge. Thank you.
Thank you and you're welcome
Thanks for the video. Just swapped my out for $63.00 including the puller.
Happy it worked out
Best video on the matter. Thank you.
Update: I change two (non-leaking) as a preventive measure as they were 15 years old. The Moen puller did work fine for me. Great advise to use the large nut of the puller and a wrench to pull out the first 4 mm out of the valve. After that a combination of pulling with the Moen puller while pushing with the finger on the valve, adding generously W-40 where the clip goes and moving slowly left and right (but only 3 mm each direction only to avoid that the unattached rubber fold if you turn to much), I manage to extract both in aprox 10 minutes each. Quite nerve braking. Thanks again for the video.
Glad it was helpful!
Thank you for posting this, was a great video and really helped me today. My wife was quite impressed also that I was able to fix it. Thanks.
Happy it worked out thanks for watching
Definitely the best video on CZcams for replacing the cartridge. The explanations were clear and the multiple angles helped so much.
You're welcome and thank you
Thank you endlessly for this awesome tutorial. Having never done any plumbing tasks, was worried especially after looking at a few 'oh just do this'... and done videos.
Then found an actual educational one (meaning yours) that showed and explained EVERYTHING even with mistakes we all make.
This was perfection at it's finest. Cannot thank you enough!
Oh, the end results on my end
are flawless due to your guidance.
Thank you so much it’s always nice to know that the video is helpful and appreciated
Q
Yes
Hey thanks for the video! Some of my own insights:
Bring a towel! Tuck it right under the enclosure, so any nasty dark water doesn’t drip on your tiles and grout.
Watch out for broken gaskets! A small piece of the old cartridge fell off in the enclosure, and it took me a few minutes to figure out why the new one wasn’t going back in all of the way.
When you take the assembly apart, line them in order so when you close it back up everything goes together in its proper sequence.
I’m thinking the core puller is definitely worth the 15$ investment for aggravation’s sake.
Make sure you let all of your faucets run for a little bit after you turn the main back in so you can flush out any sediment. Same goes for your washer machine; run an empty load so your clothes don’t get a rust bath.
Thanks again for the video!
Great suggestions
It was taking me 5 months to do this!! Only because I hadnt gotten to it haha.. But one trip to the hardware store and watching your video made it so simple.. Simple enough that it made me wanna do it!! The view, the voice over everything was great!! Thank you so much!!
you're welcome
Very good instructions. Thanks for including those tips that others don't mention (including MOEN).
Glad the video helped and thanks for the comment
Perfect instruction, pace, and inflection. Made my job a lot easier. Thank you so much.
Thanks for the comment
My Man!!!! right on spot.Great idea pointing out a mistake I would have made for sure. Thank you.....
You are welcome thanks for watching
Excellent video!!! You are a very gifted teacher. Also, if I hadn't seen your video and your discussion of your "mistake", I would have had no idea why I had leaks everywhere. Thanks a ton!
Thank you
Worked for me replacing the cartridge in my 2nd bath just now, thanks!
No problem glad the video helped
Great video, the tip about pushing in the new one incorrectly was an excellent add to the video!
Thanks for the comment glad the video helped
Best informative video on CZcams that explains how to do this. I just replaced one of ours in my kids bathroom while watching this👍🏾👍🏾👍🏾
Thank you for the comment its much appreciated
Thank you, thank you for the great, and detailed video! Your video turned an all day frustrating project into a 30 minute, and very controlled swap-out.
A couple of comments (if I may) which would probably fall into the category of “everyone knows that”, I used a wet/dry vacuum to prevent water from running into the bathroom wall during cartridge swap-out, and I used a head lamp (flashlight) which greatly helped during the removal and especially the re-insertion process of the locking pin.
Thank you again!
You're welcome and thanks for the tips
Bro you saved my life with this video. Thank you so much.
Happy it helped
Nice camera angles and very helpful instructions. Keep it up!!
Thanks for watching I appreciate it
Great vid. Helped me replace my shower cartridge. The special removal tool was a must and worth the $15 cost
Thank you glad it worked out. Yes the tool is great but it doesn’t last long since it’s made of soft metal.
Where did you get the core puller from? Or what is the name that I can find it at Home Depot or Lowe’s?
@@one121only here you go www.homedepot.com/p/MOEN-Cartridge-Removal-Tool-for-1200-or-1225-or-1222-Cartridges-104421/202998692
Thanks I couldn't get retaining clip back in. Watched your video and realized I had pushed on the brass piece and it wasn't flush. Excellent video!!!
You are welcome thanks for watching. Do you think it was easy to do overall?
Terrific video and I watched a few to get an idea of what to expect This video points out the critical tip to NOT push the new cartridge in by gripping valve stem with pliers. Thank you!
Thank you for the comment
Great video. I just replaced my cartridge following your procedure. Initially, I hesitated buying the Moen cartridge puller ($15.98 w/o taxes) but I am glad I did. It took pretty good effort to dislodge the old cartridge. Everything is back together. Thanks.
Awesome glad to hear
Excellent video. I made the "small mistake" and it caused me to work on trying to get the retainer clip back for 20 minutes. Your explanation of your mistake at 6:22 was a big cost saver for me. I thought I was doomed. Thank you, good Sir!
Thank you for the comment and I'm glad I could help
Great video, thanks! The "mistake" was valuable for my own diy cartridge replacement. Glad that you included it in your video.
No problem thanks for watching
Excellent video and with multiple angles, it is one of the best video I have seen. You get FIVE STARS. I will try to do it myself and save a bundle! Thanks so much
Thank you
Great video. Great pace, told with patience and explanation of every step along the way. Thank you for doing this. I needed it today.
Im glad it was helpful thanks for watching
There are many videos for this process. Here is one of the best. Thank you!
Thank you for the comment, after seeing all the same videos trying to figure out what they were doing I decided to make my own video.
Life: Hindsight 101 I’m so glad you did. I liked your use of several camera angles.
Excellent guide. Showing the mistake of pushing in the bronze stem saved me from doing the same thing. I used a 7/16" socket, a fender washer and a paint can opener to space my hillbilly rig so that I could use the philips head screw to start pulling the core out, as an alternative to buying the Moen puller. I suggest lubing the housing before installing the new core. Plumber's silicone grease is the best but the lube in the package works too. Wet an appropriate sized fingertip with lube and smear it around inside where the core goes. Photograph your old core and contact Moen Customer Service to receive a free replacement part. Sure, there is a nice new core in your shower faucet now; but, the one it replaced was new once upon a time. I have three of the accursed devices in my home. Moen sent me a FREE replacement for one that failed during a hurricane. Weather related, I don't think so. Just horrible luck. I used that replacement tonight when my personal shower faucet failed just as I was going to bed. OH! AND, you might suggest stuffing rags, or something into the hole around the faucet before attempting to install the locking clip. I lost three of the wonderful things while replacing my daughter's shower faucet core. I stuffed the hole before pinning the core tonight and the clip went in as if it knew there was no escape. Yes, I understand that I'm a little obsessive (and clumsy) (and cheap). Thanks for a very good guide. I liked it more than previous ones I have viewed. I think you might be one of the first to warn about pushing the stem in too far.
Thanks so much for you comment. The mistake was truly a mistake because I had to undo everything I did off camera because the faucet leaked after I was finished. That was a pain but if it helped others then it wasn’t so bad.
This guy should do all tutorial videos for everything. Subscribed.
Thank you so much
Solved this problem, thanks to you! You were spot on that nylon key is not needed. The aftermarket moen puller has held up for me. The nylon key came in handy when I flipped it over to push the cartridge in place. The nylon key I was using had a hole thru the square capped end.
Flag you could use the nylon piece for something
One of the best vids on this topic. The 3 views are fantastic!
Thanks i though I have 3 cameras might as well use them
Excellent DYI video, I liked the multi angle views and the easy to follow description of what was going on at all times. 5 Star
Jerry McSpadden thank you for the feedback I appreciate it
Dude, you rule! Your comment on putting in the cartridge in such a way that it leaks helped me so much. Thank you thank thank you.
No problem!
I watched three other videos on replacing the 1222 cartridge, and this is the best one, even better than the MOEN factory video. I liked the "mistake" you made when installing the new cartridge and explaining what you did wrong. I assure you that I would have made the same mistake
I watched many videos explaining how to do this and yours is simply the best. Thank you SO much!
Thank you I appreciate the comment
Excellent video! We could not have installed the new cartridge without it! Yours is actually better than the one Moen did!!! Thanks you so much!
Thank I'm glad the video helped
Had this issue lately but handle hadn’t broke. 30 min ago it broke. This is a great video. Thank you.
You're welcome!
Best video on youtube on how to replace the cartridge! Great tips. Recommend bringing a towel - after I removed mine, a LOT of water flooded out.
Glad it helped!
I appreciate the step by step easy to follow way you explain things. I need to see if you have one for a kitchen sink as well.
Thanks for the comment, nothing on kitchen sinks as of yet. But if my wife wants a new one I’m sure I’ll make a video about it.
Perfect video. Very well shown step by step. Saved me from calling the plumber and not difficult at all. If you call Moen, they will send you the cartridge for free.
Everyone says that but they gave me a hard time without the receipt
Thank you!!! I spent forever completing this job. My old cartridge was stuck due to the rubber on the sides. After I finally got it removed (i had to go buy the moen cartridge removal tool) I couldn’t slide the new one all the way in! The oil they give you inside the packaging is useless and wound up not being sufficient to slide mine in without ripping the rubber again. Swapped the broken one out and bought some faucet grease. Used the removal tool to insert and voila!! For whatever reason my clip wouldn’t fit but during one of my many trips to Home Depot I had bought a three clip replacement pack and one of those fit perfectly. 🎉
Awesome
Thank you. It really helped. Faucet was fixed in about 45 minutes with two trips to the store for the removing tool and then the cartridge.
Awesome glad to hear
Best video I've seen yet on this. Exactly like I needed. Thank you 💪🏾🙏🏾
Thank you
THE best video about how to replace 1222 with handle, thanks!!!
Glad you liked it!
We watched several of these. This one is the best!! Thank you!!
Thank you
This was very helpful. I followed your instructions today. Now my showe handle works again. Thank you!
You're welcome
Thanks Again!!! for your tip on getting the back seal closed to stop a leak after installing the replacement. Your video made it easy to resolve the problem.
You're welcome!
Thank you sir, great video. I really appreciate you leaving the "mistake" in the tutorial. The back piece was not flush when i initially prepped. Thankfully i remembered your presentation, and caught the error before i assembled. I had a tough time pulling the old cartridge out(Wd40 for the win!!), the rubber pieces just disintegrated, and i had to fish pieces out of the hot and cold valves.
In my new home I had the same issue it took me a good 20 mins to get the cartridge out. Mine broke into a few pieces that I had to fish out par for the course I guess
Thank you for your time and help to solve this repair!
Glad the video helped
Thank you for a clear and comprehensively explained how-to
You're welcome
Thanks so much for the video. Sunday Evening and didn't wanna call an after hours plumber. My husband and I were able to replace ( with some relative ease) ourselves.
Awesome glad to hear
great video with great instructions. you just mage my life a little easier.. thank you
Thanks glad I could make things easier. When I first did this I learned some hard lessons.
Thank you sooo much, outstanding video with 3 different views and a great pace. Important details that Moen video does not contain.👏👏
Thank you im glad you liked the video
Thank you so very much for taking the time to publish this video! It helped me a lot!
Glad it helped!
Best video I have found on cartridge replacement
Thank you I appreciate the comment
Thank you for creating a very helpful video in changing this faucet cartridge, along with the other video using the different tools to remove the cartridge. Watching your videos made this repair very easy.
Welcome
Amazing video... LOVE LOVE LOVE the three camera angles!
Thanks so much!
Thank you for this video!! It is so much better than the Moen installation video. It showed me how to correct some installation errors I made following their instructions. Thank you for being so thorough and clearly explaining the steps.
Happy to help
Great job, I have watched a few other videos so far yours was best!! the different camera views helped greatly.
Thank you for the compliment
Great professional helpful video and right to the point. Especially paying attention to keeping the bottom of the cartridge flush to avoid a leak.
Thank you.
Glad it was helpful!