I caught my 6-year old watching this video (it's in my liked videos so I can find it next week when I replace my clutch) and he was just riveted. I asked him "hey, do you like that?" and he just nodded with the biggest eyes, like he'd just discovered something very cool. Runs in the family I guess. I'll get him to help me in the workshop next week - thanks Hammer Dan!
One-shot video, I've never seen such a passionate, professional and user-friendly supplier. As I look for more sportster articles and forums on the internet, I'm now more sure why people always say: HAMMER ALL THE WAY!
Awesome video Dan. Thanks for the tutorial. Your clear explanations raise the confidence level in performing the swap. I appreciate your not editing out the slight mistakes. It makes it so much more down to earth knowing that even the best consult the manual.
I am so glad this tutorial exists. Between the service manual and CZcams, there isn't much a fella can't do to his Sporty! I have been waiting for my clutch tool since pre covid and it got lost in the mail. I got a refund, and ordered another one.....then the new one was delivered to me a week ago....and the very next day the original one was delivered hahaha now I have 2 tools.....and 1 clutch to use them on😂 I will be tackling the clutch this morning sometime, just trying to locate some primary fluid first! Wish me luck, I can't wait to dump it and rip that tire!!!
Great video, close ups and instructions. When I pull my softail primary cover, I grab a cardboard box, poke holes in it and secure the bolts in the order they came off in.
Worth the watch, owned a Buell X1 Lightning for a year, 2nd gear blew out. In process of replacing transmission, this video has great info, and the primary fluid pain was worth it too! Primary disassembly video is a great video as well, if anyone needs a starter, clutch, or in my case a transmission!
Watch the video several times and then read the procedure in the HD Service Manual. I barreled in, over compressed and broke my pressure plate. Dan was a HUGE help getting me out of the mess and gave me a fantastic web site for buying HD parts. I do have some tips to share. First, I did not replace the oil seal around the shifter pole. So when I tried putting the primary cover back on I kept knocking the gasket off. I finally put the gasket onto the primary cover and dropped the dowels into the cover as well. Then I ran a small zip tie through each dowel which let me push the primary cover over the oil seal while pushing the primary chain behind the cover. Once aligned I cut the zip ties and secured the cover with screws. The service manual clearly indicates which screw are long and which are short. Second, the O-ring behind the clutch inspection cover kept falling out of place as I tried to put the cover on. I used four little dabs of sticky red boat trailer axel grease to hold the O-ring in place and the cover went on without a hitch. Thanks Dan for the video and the help. BTW - the Hurricane Air Cleaner I bought from you folks years ago in Colorado is still working just great!
This is the best walk through I have found on this topic! Seriously thank you for this. I recently did a stage IV on my roadster and it feels like the clutch slips when I really get on it, so upgrading to a performance clutch is on my radar. I was dreading having to take it to the dealership to do the work, but watching this I really think I can pull this off myself. Ive played with adjusting the stock clutch to no avail, I was thinking that maybe just upgrading to a stronger clutch spring might resolve the issue as well, but might just do the full kit since I am going to be in there.
Thanks for the clear guidance on this one. Had never done a harley clutch before. This video got me through this job from stem to stern in 2 hours. Thanks to hammer perf. team. Now just gotta get my 1275 kit ordered up for for my 2013' 48.
I like the complete, comprehensive video that show the entire process of installing the clutch pack and all adjustments, fluid levels, and covers. Too many, if any, videos do not show the entire process from beginning to end. Most just stop somewhere and then reference an earlier or later video they did on, for example, adjusting the clutch cable at the lever. I like my friction zone to start closer to the grip. But I worry of I'm disengaging the clutch enough. So I put the lever spacing at the recommended spacing. Very good video. Thank you.
Hey brother thanks for the video super informative for my first time ever doing 1 on a hogg So thanks another I will b getting ahold of yall for that 1275 big bore thanks
Thanks fo this man. I went ahead a fixed my clutch. As I'm watching it I said to myself "I should go ahead and make a coffee" ya know for a quick energy boost before I go ahead and take this project on. So I went ahead and made a cup followed by going ahead and heading into the garage and going ahead and getting a head start on going ahead and fixing my clutch.
A few months ago i did a screaming eagle stage IV kit on my 2017 roadster and recently the clutch started skipping. I teied adjusting it a few way to no avail so armed with this video i picked up the extra plate clutch kit and successfully (thats largely to this walk through) swapped out my clutch. Once i got in there the grenade pkate had lived up to its name, im glad i didnt keep riding where damage could have been caused. Rode today and its better than ever. Huge difference over the stock, tons of power actually making it to the pavement that i was losing on the stock set up. Thank you!
I’ve been watching your videos and I’d like to say there are great you guys really show and tell the public how to do things most shops won’t , it’s always been like a big secret on how to work on Harley-Davidson’s with most shops, thanks for the videos
Just done a clutch swap on my 1200 conversion, used the BDL kit, Harley formula+ oil. Always a little nervous on first start up arnt we 😂 shouldn't have worried, much smoother into gear, nice weight on the clutch lever, more but comfortable. This video is great to have on hand, the manual says it in words, but seeing is so much easier! Thankyou, another job conquered ready for summer when it arrives.
Thanks. I’ve rewatched this multiple times. Currently siting in front of my primary with about 3/4 of a qt of wasted brand new oil... should’ve waited and listened to hear you say don’t forget the plug lol. you live & learn
cant thank you enough, Dan! watched several other videos and swapped my clutch. Needless to say, I had problems with my clutch. Watched your video and everything now works great! From now on I'm watching your videos first! Great job, keep up the great work. Again, thank you.
Thank you for this amazing well detailed video. I like how calm you are for a mechanic and even when you had to go back it was no worries and no stress. Best clutch video I have seen so far and I have a R1 as well and that clutch is a shit show. Be safe out there y'all!
After watching this for the 100th time I mustered up the courage to install my extra plate kit... finished at 11pm. Wait till tomorrow to feel the results. Oh boy am I anxious
Hey Hammer, thanks to this video on Sportster Primary/Clutch I was able to correct my ‘05 XL1200c two shifting problems, (1). It was dragging in neutral at running temp. soon after changing the oil. ( I had about 3 ozs too much oil in it ! ) My “Maintenance Manual” requires 32 ozs NOT 29 which is what filled the Primary case to bottom of the aluminum clutch Basket, as you said. (2). It was shifting hard into 1st gear. ( I adjusted the clutch Cable & Primary again to the Manual, WRONG or maybe not EXPLAINED as completely as you have! ) I’ve been monkeying with this PITA for Way Too long and just today, Easter Sunday after my family disappeared, she’s shifting smoothly as ever without any slip or drag. Again thank you Very much for the details you always explain so well, not only How but Why. Uncle Fudd < N.PA
Great job. FINALLY, a tube video that takes the time to explain EVERY detail. So many others just jump around and edit. Skipping important, to the DYI'er, steps. Thanks!
Thanks for , "the how to" my first clutch job and stock clutch kit.change to an extra plate as that inner sping plate did disasemble in my primary case , like you said it would.with your help I got her done.thanks again
I installed the Energy One clutch back in 2019 and it’s still awesome….even more so now that I have the Hammer 1275 in my Sporty! Can’t thank you and Aaron enough for helping me getting my bike built up. This bike goes like a rocket. Certainly more than I need most of the time but when I do need that boost of power oooh baby it sure is there! ✌️ from Xena here in Massachusetts! Oh and lefty here too. 😜
That “compression spring” in the stock clutch is called a “judder spring”. It is supposed to prevent clutch chatter. Automotive transmissions use some type of this for chatter, application smoothness, plate separation etc. Great videos, thank you for your work👍
Very methodical demonstration, I learned a great deal of clutch service. I have clutch slipping problem, wanted know how to handle, but haven't found answer in this video nor any other video. Sooner or later one will face clutch slipping problem ! My bike has < 30,000 miles, it is happening, clutch slips. Was interested learning what to do, check CZcams everywhere, but no conclusive answer. Adjusting clutch cable is trivial, but it does not work if you have worn clutch plates. Few places suggested sanding the steel plates against 220 grit, so & so... but don't seem to be so nice things to do and don't know that little roughing will last long. There aren't any video that solidly tell you how to handle usual clutch slipping. I have wasted many hours on Web. After careful studying of clutch working PRINCIPLE, I have concluded that slipping can easily be taken care of !!! JUST PERFORM STANDARD CLUTCH ADJUSTING PROCEDURE IN THIS VIDEO, and you'll have solid clutch working again !!! (unless you have very very old, thoroughly worn plates, so that the spring plate fully expanded, no longer give pressure) I have done this and my clutch working beautiful again. I guess "clutch service" for slipping will charge you a lot, but it's a trival task by bike mechanic in 10 minutes. If there is any interest to know why, I'll follow up later.
my clutch basket got gouge in the middle from inside from having the stock clutch set, thank god i caught it on time i had revits going all over the place, definitely upgrading to a extra plate clutch, thank you for the video!!
I have a buell blast and my clutch is stuck engaged basically acting as if it’s in neutral. I’m thinking that riveted piece may have come apart. Would it cause that? Clutch cable and clutch adjustment is good
You can also pour your primary fluid into your primary through your inspection cover plate too if you dont take your derby cover off when you change the fluid
As soon as my roadster is run in, I’m going to get the stroker pack or whatever is biggest torque. I like the bike but need to use all this new found knowledge. Not sure if I need the revs. I need to find the best videos to determine what to do. Obviously shipping to Australia is a thing for a cost. I’d love to hear from anyone who has done it.
Hello! Thanks for the video, it's very useful. Do you have any suggestion for softening the clutch? I also replaced my stock clutch with a Barnett extra plates kit and a heavy-duty diaphragm clutch spring . It's way too stiff now, especially riding around town.
Thank you! I'm thinking of going with a high performance clutch on my 2014 sportster custom 1200 Recluse is what I'm thinking I live in Phoenix, AZ. The heat is crazy I'm thinking the rekluse will handle the heat better Your thoughts?
Thank you guys for making this video! I just recently bought the 1250 kit from you guys and I'm installing an extra plate kit with the 25 percent stronger spring. So this will come in real handy!
Hi, thanks for great video. I installed an Energy One High Performance extra plate clutch kit, according this. After installation there's a chirp/squeal every time I take off in first. Very noticeable. I can eliminate the chirp if I take off real slow. Do you have an idea how to fix this? Thanks!
Fantastic video. I have 2016 xl1200c . A little over 8000 miles on it. Stock clutch. I want to remove the grenade ring. Stage 1 only build but i do get on it pretty good. Should i wait?
Thank you Brother...I will defenitly order the parts I need for my 2012, 1200 C sportster and install myself..the shop want an arm and a leg...if you know what I mean... I've already done Mose of the maintenance myself..primer oil, adjusting chain, adjusting cable & by the hub clutch adjustment...can't be afraid of this...I got this (I hope :))....Thanks again..& God Bless
Great video. I have a hd , sportster, xr1200x, 2011 model, which replacement clutch kit do you recommend for street use , stock motor, and I do not have gorilla arms! Keep up the good work 👍
Great video. This video helps me understand my 1991 HD 1200 better. ah did note the jam nut or locking nut for the primary chain adjustment block is on upside down, not a big deal. The flat seal on the jam nut goes towards the transmission case I would think? Helps seal the case. There's a land milled into the transmission case for that flat seal to crush against. : )
Excellent video for thorough aspects of clutch. Superb instructor. Unfortunately I don't understand the final clutch cable adjustment, rght,left,tght,loose,.... tght ½turn..... seems to be very important aspect...
Some old Japanese bikes are also designed in the same way, through the pressure plate, sensitive to fine-tune the magnitude of the opening/closing of the clutch set. He demonstrates in his video about the left, right, left, right movement, the purpose is not to push the lever directly to the deepest point. Instead, let the pressure plate touch it slightly, with a little pressure against it. So by entering slowly, feel the contact between the pressure plate and the clutch, and finally turn slightly half a turn, and then lock it. I repair some old Japanese bikes with the same procedure, gently turn a few times, feel the clutch make contact, then turn slightly half a turn, and then lock it up. I was quite surprised that this was the first time I tried to contact Harley bike, I did not think Harley also has a similar design.
Thanks so much for this - has made installing my Energy One very straightforward in my 2010 sporty. just for clarity I adjusted the clutch to half a turn after the tight spot @ 36:50, some manuals suggest 1/4 turn. Just interested to hear your advice. Thanks heaps in advance - Simmo
---------- marriage....similarly to clutch needs adjustment ------- look back when you were engaged ------ no slippage ------ well oiled ------ full throttle riding ------- what went wrong
Love your videos Dan. I do have a question for you though. I hear from a lot of guys that I should ditch my stock clutch pack due to the ticking time bomb of the brass riveted “grenade” spring. You mentioned in this video that if you’re pulling a lot of HP it’s a good idea or an aggressive rider. At least, not yet, I haven’t modified my bike to qualify as drag & I’m a pretty sensible rider ( with my occasional excuses to rid by bike of blow by of course). Would you recommend swapping out the clutch pack on a 2005 XL1200C with 11 k miles? Thanks.
well, its kind of a personal call. Me personally, I would swap out the clutch just because. Especially if I'm doing any kind of performance upgrades to my bike.
Mine wasn't hard ridden and the spring plate came apart jamming the clutch to the point where I couldn't compress it and had to cut off the spring retainer ruining the pressure plate.
Thanks. I set up my laptop in the garage and followed your steps. Saved myself a ton on labour costs and my sportster shifts like butter now. Lots of rivets in the clutch... poor design by HD!
Quick question, how much play should my clutch hub basket have in it? its got a slight wobble in it and im wondering if I should replace the bearing for it.
Just put a extra plate kit on my 2000 Sporty, but noticed that the primary chain tensioner boot had grooves on it , should I replace it or can I still reuse it.
i changed my clutch pack out with Barrnett extra plate set and new clutch cable shifts smooth but cannot get it to go into Nutral unless moving or motor off
Use a piece of cardboard and draw the shape of the primary cover on it. Then use a screwdriver or punch, to then create holes to map out where you pulled each bolt out of. Works 100% of the time when doing this.
Very nice video and I will try to do the same. According to my parts list, normal clutch consists of 6 steel plates , 8 friction plates, and one spring plate. And if you remove spring plates, we should need 8 steel plates and 9 friction plates, that means we need additional two steel plates and one friction plate. Is that correct ?
Man this is a great help. I have a 2005 1200, would an extra plate kit be recommended for it as well? I don't plan to upgrade the engine unless I have to do a tear down. Also, how difficult is it to get the starter out at this point, or it is recommended to pull the primary chain/assembly? It was mentioned in a another teardown video that starter CAN be pulled out without going much further
Also thank you for that 1/2 wrench method! I'm guilty of overfilling the primary with a full quart. I smell something new/not fuel. Not sure it's burning off, but maybe it's coming out as you mention. I'll be more calculated in the future
I caught my 6-year old watching this video (it's in my liked videos so I can find it next week when I replace my clutch) and he was just riveted. I asked him "hey, do you like that?" and he just nodded with the biggest eyes, like he'd just discovered something very cool. Runs in the family I guess. I'll get him to help me in the workshop next week - thanks Hammer Dan!
One-shot video, I've never seen such a passionate, professional and user-friendly supplier. As I look for more sportster articles and forums on the internet, I'm now more sure why people always say: HAMMER ALL THE WAY!
Awesome video Dan. Thanks for the tutorial. Your clear explanations raise the confidence level in performing the swap. I appreciate your not editing out the slight mistakes. It makes it so much more down to earth knowing that even the best consult the manual.
Doesn't get better than this. You described it perfectly!! Thank you!
Great Video thank you well done str forward clear excellent
I am so glad this tutorial exists. Between the service manual and CZcams, there isn't much a fella can't do to his Sporty! I have been waiting for my clutch tool since pre covid and it got lost in the mail. I got a refund, and ordered another one.....then the new one was delivered to me a week ago....and the very next day the original one was delivered hahaha now I have 2 tools.....and 1 clutch to use them on😂
I will be tackling the clutch this morning sometime, just trying to locate some primary fluid first! Wish me luck, I can't wait to dump it and rip that tire!!!
Love these videos in real time. No editing, mistakes included. The mistakes help to drive certain points home! Thank you.
Great video, close ups and instructions. When I pull my softail primary cover, I grab a cardboard box, poke holes in it and secure the bolts in the order they came off in.
Worth the watch, owned a Buell X1 Lightning for a year, 2nd gear blew out. In process of replacing transmission, this video has great info, and the primary fluid pain was worth it too!
Primary disassembly video is a great video as well, if anyone needs a starter, clutch, or in my case a transmission!
Watch the video several times and then read the procedure in the HD Service Manual. I barreled in, over compressed and broke my pressure plate. Dan was a HUGE help getting me out of the mess and gave me a fantastic web site for buying HD parts. I do have some tips to share. First, I did not replace the oil seal around the shifter pole. So when I tried putting the primary cover back on I kept knocking the gasket off. I finally put the gasket onto the primary cover and dropped the dowels into the cover as well. Then I ran a small zip tie through each dowel which let me push the primary cover over the oil seal while pushing the primary chain behind the cover. Once aligned I cut the zip ties and secured the cover with screws. The service manual clearly indicates which screw are long and which are short. Second, the O-ring behind the clutch inspection cover kept falling out of place as I tried to put the cover on. I used four little dabs of sticky red boat trailer axel grease to hold the O-ring in place and the cover went on without a hitch. Thanks Dan for the video and the help. BTW - the Hurricane Air Cleaner I bought from you folks years ago in Colorado is still working just great!
Now I feel confident tackling this job myself, thx Dan. Never left any reviews in my life but this was well deserved 👏
This is the very best video out there to help you change out your Sportster clutch.
This is the best walk through I have found on this topic! Seriously thank you for this. I recently did a stage IV on my roadster and it feels like the clutch slips when I really get on it, so upgrading to a performance clutch is on my radar. I was dreading having to take it to the dealership to do the work, but watching this I really think I can pull this off myself. Ive played with adjusting the stock clutch to no avail, I was thinking that maybe just upgrading to a stronger clutch spring might resolve the issue as well, but might just do the full kit since I am going to be in there.
There’s something about working with engines and related stuff that calms me down. Beautiful, thanks a lot for the videos 👍
Ok Jesse:)
Thanks for the clear guidance on this one. Had never done a harley clutch before. This video got me through this job from stem to stern in 2 hours. Thanks to hammer perf. team. Now just gotta get my 1275 kit ordered up for for my 2013' 48.
I like the complete, comprehensive video that show the entire process of installing the clutch pack and all adjustments, fluid levels, and covers. Too many, if any, videos do not show the entire process from beginning to end. Most just stop somewhere and then reference an earlier or later video they did on, for example, adjusting the clutch cable at the lever. I like my friction zone to start closer to the grip. But I worry of I'm disengaging the clutch enough. So I put the lever spacing at the recommended spacing. Very good video. Thank you.
Hey brother thanks for the video super informative for my first time ever doing 1 on a hogg So thanks another I will b getting ahold of yall for that 1275 big bore thanks
Thanks fo this man. I went ahead a fixed my clutch. As I'm watching it I said to myself "I should go ahead and make a coffee" ya know for a quick energy boost before I go ahead and take this project on. So I went ahead and made a cup followed by going ahead and heading into the garage and going ahead and getting a head start on going ahead and fixing my clutch.
A few months ago i did a screaming eagle stage IV kit on my 2017 roadster and recently the clutch started skipping. I teied adjusting it a few way to no avail so armed with this video i picked up the extra plate clutch kit and successfully (thats largely to this walk through) swapped out my clutch. Once i got in there the grenade pkate had lived up to its name, im glad i didnt keep riding where damage could have been caused. Rode today and its better than ever. Huge difference over the stock, tons of power actually making it to the pavement that i was losing on the stock set up. Thank you!
I’ve been watching your videos and I’d like to say there are great you guys really show and tell the public how to do things most shops won’t , it’s always been like a big secret on how to work on Harley-Davidson’s with most shops, thanks for the videos
Just done a clutch swap on my 1200 conversion, used the BDL kit, Harley formula+ oil. Always a little nervous on first start up arnt we 😂 shouldn't have worried, much smoother into gear, nice weight on the clutch lever, more but comfortable. This video is great to have on hand, the manual says it in words, but seeing is so much easier! Thankyou, another job conquered ready for summer when it arrives.
Excellent video. This should be the standard by which other instructional videos are judged. Very well done indeed. Thx.
Thanks. I’ve rewatched this multiple times. Currently siting in front of my primary with about 3/4 of a qt of wasted brand new oil... should’ve waited and listened to hear you say don’t forget the plug lol. you live & learn
cant thank you enough, Dan! watched several other videos and swapped my clutch. Needless to say, I had problems with my clutch. Watched your video and everything now works great! From now on I'm watching your videos first! Great job, keep up the great work. Again, thank you.
Thank you for this amazing well detailed video. I like how calm you are for a mechanic and even when you had to go back it was no worries and no stress. Best clutch video I have seen so far and I have a R1 as well and that clutch is a shit show. Be safe out there y'all!
I watch alot of "how to" vids. You do The absolute best ones on you tube! Thank you so much!
After watching this for the 100th time I mustered up the courage to install my extra plate kit... finished at 11pm. Wait till tomorrow to feel the results. Oh boy am I anxious
Genius. Very well explained and executed, and the recording is also perfect in terms of visibility.
Hey Hammer, thanks to this video on Sportster Primary/Clutch I was able to correct my ‘05 XL1200c two shifting problems, (1). It was dragging in neutral at running temp. soon after changing the oil. ( I had about 3 ozs too much oil in it ! ) My “Maintenance Manual” requires 32 ozs NOT 29 which is what filled the Primary case to bottom of the aluminum clutch Basket, as you said. (2). It was shifting hard into 1st gear. ( I adjusted the clutch Cable & Primary again to the Manual, WRONG or maybe not EXPLAINED as completely as you have! ) I’ve been monkeying with this PITA for Way Too long and just today, Easter Sunday after my family disappeared, she’s shifting smoothly as ever without any slip or drag. Again thank you Very much for the details you always explain so well, not only How but Why. Uncle Fudd < N.PA
Great job. FINALLY, a tube video that takes the time to explain EVERY detail. So many others just jump around and edit. Skipping important, to the DYI'er, steps. Thanks!
Thanks dan this video made my life 50 times easier isntalling a new barnett complete clutch kit.
I'm picking up an 06 xl1200r tomorrow. I can't wait for winter to hop her up!
Best walkthrough brought new life to my previously loved 2002 XL1200C
Thanks for , "the how to" my first clutch job and stock clutch kit.change to an extra plate as that inner sping plate did
disasemble in my primary case , like you said it would.with your help I got her done.thanks again
I installed the Energy One clutch back in 2019 and it’s still awesome….even more so now that I have the Hammer 1275 in my Sporty! Can’t thank you and Aaron enough for helping me getting my bike built up. This bike goes like a rocket. Certainly more than I need most of the time but when I do need that boost of power oooh baby it sure is there! ✌️ from Xena here in Massachusetts! Oh and lefty here too. 😜
How much HP are you putting down with that 1275 if you don't mind me asking
Really appreciate these videos. First time working on my Roadster and these videos have helped out so much.
I'm also a lefty in a right hand world. Thanks for posting.
That “compression spring” in the stock clutch is called a “judder spring”. It is supposed to prevent clutch chatter. Automotive transmissions use some type of this for chatter, application smoothness, plate separation etc. Great videos, thank you for your work👍
Just did my clutch.Thanks for your very helpful videos.Thanks Hammer Dan🏍🏁👍🍒
This was more than teaching. It was a blessing!! Thanks, sir! You did a AWESOME job to all of us!!
I can't Thank you enougth!!
Definitely want to thank you for all your help just installed a clutch on my Sportster thanks to this video
Best helpful Sportster primary cluth tutorial of YT. Thanks!
Very methodical demonstration, I learned a great deal of clutch service.
I have clutch slipping problem, wanted know how to handle,
but haven't found answer in this video nor any other video.
Sooner or later one will face clutch slipping problem !
My bike has < 30,000 miles, it is happening, clutch slips.
Was interested learning what to do, check CZcams everywhere,
but no conclusive answer.
Adjusting clutch cable is trivial,
but it does not work if you have worn clutch plates.
Few places suggested sanding the steel plates against 220 grit, so & so...
but don't seem to be so nice things to do and don't know that little roughing will last long.
There aren't any video that solidly tell you how to handle usual clutch slipping.
I have wasted many hours on Web.
After careful studying of clutch working PRINCIPLE,
I have concluded that slipping can easily be taken care of !!!
JUST PERFORM STANDARD CLUTCH ADJUSTING PROCEDURE IN THIS VIDEO,
and you'll have solid clutch working again !!!
(unless you have very very old, thoroughly worn plates,
so that the spring plate fully expanded, no longer give pressure)
I have done this and my clutch working beautiful again.
I guess "clutch service" for slipping will charge you a lot,
but it's a trival task by bike mechanic in 10 minutes.
If there is any interest to know why, I'll follow up later.
my clutch basket got gouge in the middle from inside from having the stock clutch set, thank god i caught it on time i had revits going all over the place, definitely upgrading to a extra plate clutch, thank you for the video!!
I have a buell blast and my clutch is stuck engaged basically acting as if it’s in neutral. I’m thinking that riveted piece may have come apart. Would it cause that? Clutch cable and clutch adjustment is good
I know this is old but u ever figure it out?
great video, you taught so much and managed to do my Buell Firebolt with your video. thanks
Excellent instruction. Excellent video. Thank you!
Best instructional video ever ! Thank you .
Thanks for the video, very informative and useful!
Excellent video, very well explained and shown! Thanks very much.
You can also pour your primary fluid into your primary through your inspection cover plate too if you dont take your derby cover off when you change the fluid
As soon as my roadster is run in, I’m going to get the stroker pack or whatever is biggest torque. I like the bike but need to use all this new found knowledge. Not sure if I need the revs. I need to find the best videos to determine what to do. Obviously shipping to Australia is a thing for a cost. I’d love to hear from anyone who has done it.
this was very good. I have a better understand of the clutch pack now. and good info on the gap at the lever. great.
Thanks Dan as always
Great Video !! Thank you for sharing your knowledge !!
Hello! Thanks for the video, it's very useful. Do you have any suggestion for softening the clutch? I also replaced my stock clutch with a Barnett extra plates kit and a heavy-duty diaphragm clutch spring
. It's way too stiff now, especially riding around town.
Thank's for all!! Great video for my nightster 1200. top quality !!!
Thank you!
I'm thinking of going with a high performance clutch on my 2014 sportster custom 1200
Recluse is what I'm thinking
I live in Phoenix, AZ.
The heat is crazy
I'm thinking the rekluse will handle the heat better
Your thoughts?
This video helped me a LOT. Thank you so very much!!!
Not doing my clutch right now but I found this video very interesting nice job, Thank you
Thank you guys for making this video! I just recently bought the 1250 kit from you guys and I'm installing an extra plate kit with the 25 percent stronger spring. So this will come in real handy!
Great video as always
Hi, thanks for great video. I installed an Energy One High Performance extra plate clutch kit, according this. After installation there's a chirp/squeal every time I take off in first. Very noticeable. I can eliminate the chirp if I take off real slow. Do you have an idea how to fix this? Thanks!
Excellent instructional video. :)
Fantastic video. I have 2016 xl1200c . A little over 8000 miles on it. Stock clutch. I want to remove the grenade ring. Stage 1 only build but i do get on it pretty good. Should i wait?
Good vedio,u show everything and say what ur doing,a turning pieces the right way.thanks.
Awesome tutorial. Thanks for investing your time. 🤙🏼
Благодарю!!отличная работа👍🏻
Thank you Brother...I will defenitly order the parts I need for my 2012, 1200 C sportster and install myself..the shop want an arm and a leg...if you know what I mean... I've already done Mose of the maintenance myself..primer oil, adjusting chain, adjusting cable & by the hub clutch adjustment...can't be afraid of this...I got this (I hope :))....Thanks again..& God Bless
I thought you could put the oil in at the primary inspection cover. Great video. I’m going to change mine. Thanks
Thanks a lot from Guatemala, This was a really awesome video!!. The best ever hehe, Have a blessed life good sir, you and your family.
Awesome video very helpful!!
Smashing video very informative 😁👍🌹🇬🇧
Awesome this video showed me exactly what I needed to do
Great video.
I have a hd , sportster, xr1200x, 2011 model, which replacement clutch kit do you recommend for street use , stock motor, and I do not have gorilla arms!
Keep up the good work 👍
Thank you for your video
Great video. This video helps me understand my 1991 HD 1200 better. ah did note the jam nut or locking nut for the primary chain adjustment block is on upside down, not a big deal. The flat seal on the jam nut goes towards the transmission case I would think? Helps seal the case. There's a land milled into the transmission case for that flat seal to crush against. : )
Great video thanks for sharing ...
Excellent video for thorough aspects of clutch. Superb instructor.
Unfortunately I don't understand the final clutch cable adjustment,
rght,left,tght,loose,.... tght ½turn..... seems to be very important aspect...
Some old Japanese bikes are also designed in the same way, through the pressure plate, sensitive to fine-tune the magnitude of the opening/closing of the clutch set.
He demonstrates in his video about the left, right, left, right movement, the purpose is not to push the lever directly to the deepest point. Instead, let the pressure plate touch it slightly, with a little pressure against it.
So by entering slowly, feel the contact between the pressure plate and the clutch, and finally turn slightly half a turn, and then lock it.
I repair some old Japanese bikes with the same procedure, gently turn a few times, feel the clutch make contact, then turn slightly half a turn, and then lock it up.
I was quite surprised that this was the first time I tried to contact Harley bike, I did not think Harley also has a similar design.
Best vid out here by far ! Thanks
Great job even showing the manual!
Thanks so much for this - has made installing my Energy One very straightforward in my 2010 sporty. just for clarity I adjusted the clutch to half a turn after the tight spot @ 36:50, some manuals suggest 1/4 turn. Just interested to hear your advice. Thanks heaps in advance - Simmo
Same, my understanding is a quarter turn a well.
thanks for this Dan great vid😎😀
My clutch is fine, it’s new in fact, yet I watched the whole video. I’m married. Enough said.
---------- marriage....similarly to clutch needs adjustment ------- look back when you were engaged ------ no slippage ------ well oiled ------ full throttle riding ------- what went wrong
same
@Ovtndmntn721 ----- friction ----
Underrated comment.
Same... watching it for the 5th time
Love your videos Dan. I do have a question for you though. I hear from a lot of guys that I should ditch my stock clutch pack due to the ticking time bomb of the brass riveted “grenade” spring. You mentioned in this video that if you’re pulling a lot of HP it’s a good idea or an aggressive rider. At least, not yet, I haven’t modified my bike to qualify as drag & I’m a pretty sensible rider ( with my occasional excuses to rid by bike of blow by of course). Would you recommend swapping out the clutch pack on a 2005 XL1200C with 11 k miles? Thanks.
well, its kind of a personal call. Me personally, I would swap out the clutch just because. Especially if I'm doing any kind of performance upgrades to my bike.
Mine wasn't hard ridden and the spring plate came apart jamming the clutch to the point where I couldn't compress it and had to cut off the spring retainer ruining the pressure plate.
EXCELLENT VIDEO - THANK YOU :)
Thanks. I set up my laptop in the garage and followed your steps. Saved myself a ton on labour costs and my sportster shifts like butter now. Lots of rivets in the clutch... poor design by HD!
Great video! Do you have one doing a stator?
Perfeita explicação
Quick question, how much play should my clutch hub basket have in it? its got a slight wobble in it and im wondering if I should replace the bearing for it.
Just put a extra plate kit on my 2000 Sporty, but noticed that the primary chain tensioner boot had grooves on it , should I replace it or can I still reuse it.
i changed my clutch pack out with Barrnett extra plate set and new clutch cable shifts smooth but cannot get it to go into Nutral unless moving or motor off
Use a piece of cardboard and draw the shape of the primary cover on it. Then use a screwdriver or punch, to then create holes to map out where you pulled each bolt out of. Works 100% of the time when doing this.
Great video. Doing this next week. Do you recommend replacing the diaphragm spring and retaining ring or reuse stock ones?
an aftermarket clutch will come with a stronger diaphragm spring. But you will be able to reuse the retaining ring.
I bought the Barnett pack. Came with friction and steels only
Excellent. Thanks!
Appreciate it boss!
You saved my life thank you
great video, what year is that sporster engine? is it 2016 - 2019 range?
11:45 ...or, your grenade ring already blew up 😖
You are a great instructor 👍
Very nice video and I will try to do the same. According to my parts list, normal clutch consists of 6 steel plates , 8 friction plates, and one spring plate. And if you remove spring plates, we should need 8 steel plates and 9 friction plates, that means we need additional two steel plates and one friction plate. Is that correct ?
Man this is a great help. I have a 2005 1200, would an extra plate kit be recommended for it as well? I don't plan to upgrade the engine unless I have to do a tear down. Also, how difficult is it to get the starter out at this point, or it is recommended to pull the primary chain/assembly? It was mentioned in a another teardown video that starter CAN be pulled out without going much further
Also thank you for that 1/2 wrench method! I'm guilty of overfilling the primary with a full quart. I smell something new/not fuel. Not sure it's burning off, but maybe it's coming out as you mention. I'll be more calculated in the future
How can I send you a case of beer? THANK YOU!