Installing the Tesla Dual Motor Emblem
Vložit
- čas přidán 13. 06. 2020
- Buy it here: www.abstractocean.com/dual-mo...
You can use this on any Tesla, but since Model Y is already 'chrome-deleted', and doesn't have an emblem for the motor, this is an ideal option. Easy to apply with the included foam template, installing this OEM-quality emblem takes just a few minutes. - Auta a dopravní prostředky
Looks good 👏👍
You’re very fortunate to have gotten a badge where the letters don’t stick or fall out and stick to something else. It is not as easy as your video shows.
Hi Ron. If you've had an issue with the letters sticking, please reach out to us, we're here to help. We've sold, literally, tens of thousands of these and had very few issues like this. The adhesive is pressure activated, so as mentioned in the video it's important to apply pressure at the time, and then to give it all another little push 24hrs later just to make sure it's fully adhered.
@@AbstractOcean Thanks for the reply! Problem I’m having is when I go to carefully remove the back, some of the letters stick to the film. Meaning they don’t stay in the foam insert. And trying to get them back in is well, pretty impossible.
My apologies. I had purchased another brand that looked just like yours. I have since ordered one directly from your site.
@@rbenza That does sometime happen, especially if the package went through somewhere hot when in transit. But 'squeezing' the clear film on from the front and then carefully peeling of the white backing should take care of things, but as always, let us know if not.
Can it stand a highpreassure washer after resting for 24 hours?
Will you be getting new stock?
This is absolutely not the installation height of the badges. They are not along the truck bend are much higher up. Look at any photo online or measure a vehcile
Will this product work on the Model S? Curious why it's for the Model 3/Y. When do you plan on getting more of these in stock? Thanks!
Sure! We have one stuck on our fridge, it'll work anywhere :-) The next batch is in transit now, they should arrive just before the end of the year, or if not, first week of Jan 2021.
@@AbstractOcean Thank you :) I'll be sure to pick it up the day it hits the site.
Looks great! Is it the same size as the stock emblem on the model 3?
Yup, 165 x 15mm :-)
How do you remove the original one (chrome) I bought the matte one to replace my chrome one.
We have a video, but honestly with the dual motor, the letters are so small you can more or less pick them off with your finger nails, that's all we've done in the past. Then just use some Goobegone, WD40 or similar to clean away any remaining adhesive (be sure to then clean thoroughly with rubbing alcohol). Here's the video, it's for the logos, which are trickier to remove. czcams.com/video/y0muUHry6n4/video.html
Where did you get it
Link is the description above. More stock is expect by July 19.
Too low... and why on the left side??
It's up to you on placement. We're testing other emblems on the other side of the trunk, so don't have space at the moment 🤷♂️