Don't Buy Wheels And Tires BEFORE Watching This
Vložit
- čas přidán 24. 03. 2020
- Check out our badass fitment gallery to help plan out your next build!
bit.ly/2yzxQqY
We have all made mistakes in the past, and one of the important things about making mistakes is the ability to learn from them. So take it from someone like Gels who has gone through the struggles already to help you out on your journey to picking out some new wheels and tires for your car.
Check out the wheels we can ship 3-5 days faster than the rest! bit.ly/3dotYsl
CHECK OUT THE GIVEAWAY WE HAVE GOING ON WITH ESR FORGED!
www.fitmentindustries.com/fi-...
Fitment Industries Garage:
bit.ly/2MCPRuy
Subscribe here► bit.ly/2x8fvNX
Get low with some new suspension!
www.fitmentindustries.com/sus...
We carry both Accuair and Airlift Performance!
bit.ly/2AeSSI8
We have plenty of coilover options as well!:
bit.ly/2ChmsRw
Right now is the best time to get a new set of wheels
bit.ly/2Imgo9B
Check out more videos like this!
/ fitmentindu. .
#Aftermarket #Wheels #Tires
Additional Content by:
Video:
How It’s Made
Should I Get It Reviews
VossenWheels
EXECStudio
Engineering Explained - Auta a dopravní prostředky
What are some of your rookie mistakes with wheels and tires in the past? Also, don’t forget to check out our MASSIVE online fitment gallery to help plan your next set of wheels! bit.ly/2yzxQqY
I put 20s on my 96 mustang and made the mistake of trying to run larger than 30% sidewall Rubbed on every bumper and screwed up my handling by raising my center of mass and gave me enough body roll to drag my then custom side exit exhaust
A quick question: do you ship to EU?
none, because i've been watching your videos instead of fucking up
To be honest, I did a lot of research on wheels and tires before making my purchase. I looked at the weights of both the tire and the wheel to get the lightest combination with the best performance I could afford. My current car is the only one I've bought aftermarket wheels to put on it. On prior cars where I changed out the wheels, I used factory wheels only. One other thing I started doing when buying a new set of tires was dropping down to the next tread width/tread aspect ratio from those of the stock tires. For example, I just bought a set of YOKOHAMA AVID ASCEND GT SL
in 205/60 x 15 for my Elantra which takes a stock size of 195/65 x 15. My aftermarket wheels (Primax 533) are 6.5" wide and the 205/60's are made to go on wheels ranging from 5.5" to 7.5" wide so my wheel width is right between these two values. There are two other advantages to dropping down to the next size combination: one, acceleration on the low end will be quicker and the speedometer will be reading higher than your actual speed (meaning that you're less likely to get ticketed if you go faster on the highway than the posted speed limit). Handling will also be improved plus they'll look better.
What do you recommend for a Toyota Camry v6 xle black, or red , or silver color car?
Thanks for recommending me this right after I bought some
LOL
LOL
Drippy make a video of what you ended up with and put it on ur channel im looking for new wheels for my mustang
Same lmao
Same lol
Messaged these guys for advice when I was looking at my first set of wheels and they were more than happy to help and offered great advice with data to back it up, thank you guys for you help keep up the great videos
Absolutely fam thank you for the support. 🙏🏼❤️
What did you contact them with?
@@juanvillasenor1432 cock
dats cap
I was gonna say yea😂 what did u contact them on?
As much as I like this guy he really reaaaally reminds me of Jimmy from GTA 😂
Lmfao I know right.
Seth McFarland (sp?)
oh my god he literally does 💀💀
It’s definitely him😂
My dad and I were talking about tires earlier, weird timing on this video lol I never used to be into cars until I recently bought my latest car. Now I’m diving in and learning everything I can, and my dad is happy cause I never used to be into cars.
Thanks for helping me in my journey! I’m a new subscriber, but I’m enjoying the videos and information presented. Good content and not boring
Now i know that you and your dad were talking about tires 2 years ago...i also now know your two years older then you were when you pisted this coment...😅🤣
@@leonardoasenov4467 just like I know you’re 3 weeks older…👀
@@accentt2868 🤣passes the vibe check
@leonardo asenov u now 6 months older and its 2023 now
@@drewand7288joke on you you're 9mnths older.
By far one of the easiest to understand videos on wheel and tire fitment. Well done!
Three important things to note with offset that both caught me out:
1. If you're putting in thicker brake calipers, measure to make sure they don't collide with the spokes - if they do, you'll need a spacer which in turn will require you to adjust your offset by that amount to keep the wheels in the desired lateral position
2. Check whether the wheels valve stems sit in front of or behind the spokes - on my wheels they sat behind the spokes and collided with the bigger brake caliper before I put the spacer in
3. Check your stock offsets, they might be different on each axel - on mine the rears were +16 whilst the fronts were 0 - it's less than ideal but this mistake kind of worked in my favour after discovering 2 - I put a 16mm spacer on the fronts for the bigger brakes (which I didn't have for the rears) which means that both fronts and rears stick out 16mm more than they should. If I'd had the correct offset on the rears, the fronts would have stuck out more than the rears - because I didn't, the wheels are at least in line, albeit 16mm out from where they should be.
I have a truck that I'm building into a widebody racetruck and I'm gonna have 19x9 -42 in the front with some 255/35 19s and in the rear I'm gonna have 19x11 -67 with 295/35 19s. It's gonna be a monster and it's gonna look sick as hell!
I’ll need to watch this video at least ten times to fully get it!
You'll never get.. there should be a college course on this
Dude finally someone who's thinking the same thing.
trial and error bro. once you fail and it cost you money. you will get the hang of it.
Lol
One of the cleanest FRS's I've ever seen Gels! I love the hints of aero and how it stays true to what it was meant to be. Great job dude.
Love this guy, current,y looking at wheels and he has answered two of my questions straight of the bat.
I really like the one on the top far left. It does seem like there is almost an endless amount of rims and i made the mistake purchasing a chrome set years ago that (unknown to me) was considered a "show rim" and once driven at normal highway speed it would flex like crazy made for a horrible experience going on a road trip and after 10 hours would blow up tires. I really want a new set just have to make sure i check and do my research this time
The part I have a hard time with is trying to make sure that the overall diameter of the wheel and tire are the same. I want to keep the stock overall diameter that way my speedometer reads correctly
You forgot the most overlooked factor. The center bore diameter needs to match or be a bit bigger so you can get hub centric rings at least. If you buy wheels that the bore is too small that means you have to go to a machine shop to enlarge it which cost another 200-400 dollars.
Also tire height chart is best website for tires. Look up your oem size then look up upgrade rim diameter and it will give you all tire sizes that come close to your oem height. Good for staggered setups or if you have all wheel drive cars.
This is almost never the case. Because when a wheel designer is doing the final calliper clearance test, the centre bore always clears before the actual calliper. This means is as you said the center bore becomes an issue, then the brake will most certainly be an issue too. (Actual Wheel designer here)
Glad that they suggested coilovers before new wheels.
I finally ordered a set of Enkei TS-5 18x9.5 +38 and your prices were cheaper by $200 for a set than anywhere else! The service rep helping me even reached out to Enkei themselves to verify fitment for my 2017 STI
The best explanation without and hidden fees, thanks Dude, I got mines 18x9 enkie with 245/40/18 kumho semi slick tires
ohhh okay this helps, thanks! i have decided that i will just stick with my stock wheels
I got a set of forged on one car and a flow formed on another. The forged may be stronger but dont be fooled the flow formed are just as light in weight. It also depends if they are from a quality brand, which will be more expensive. In conclusion high end flow formed wheels like advan racing are super light.
Just bought 16x8 wheels for my 03 Tacoma since the stock size (16x7) was near impossible to find in terms of price point and oem weight comparability. Did 0 offset since I didn't want rock chips in paint from negative offset and no point in positive offset on an offroader. Still will be rocking stock tire size but have yet to put the wheels and tires on. A little nervous not gonna lie. Hoping the extra inch doesn't end up screwing me over, not much I could find on forums about people having done the same, some folks said they were fine, some folks said there was some rubbing on mud guards, guess I'll find out soon enough.
I appreciate how down to earth this channel is.
I bought some Variis wheels for my G35 been loving them so far. Haven't heard much about them though
1:06 was that the minecraft pressure plate noise?
And the chest at 0:42
The bone braking sound?
Or the grass walking sound..?
Bro your websites has saved my life I just found a car exactly like mine fully stock running the tires I want but I never knew how to select them and with your website just one click and I have what I’ve wanted
Thanks so much! Looking at getting my first set of aftermarkets so perfect timing!
Damn how am I just now discovering this channel... I've watched the latest video ( this one at the time of this comment) and like 6 older videos.. you guys have killer content, keep the good content coming... You have a new subscriber and notificatiom bell squad member!!
Appreciate your support! 😍
In 5 minutes I found out the setup that I liked thanks to your gallery
Seriously these videos are a life saver. All other forums and videos were garbage.
I'm getting a set of Motegi MR116 for my Tiburon GT. Thanks for the guidance!
Was looking at wheels a month ago for my charger, picked up some other oem charger wheels for extremely cheap so now I've decided that I'm going to just save up some money and get another set that's a bit more flashy.
Maybe eventually I get the Niche Methos M195? Maybe I get something else.
Dama_NoSahh where did you buy your set bro?
I'm here after buying my wheels and tires
Lmao me too literally bought them last night now im watching this 😂
I picked up that bronze rohanna 22s for my Jeep seating on top left of screen. I love them and they break necks
I know nothing, but I’m customizing my 1997 GMC 1500 high top Savana. Want an off road vibe with all terrain tires. Getting the suspension upgraded then want to swap out the 15” rims and tires for a larger tire , taller. Will need to seek advice so the performance works. Looks easy to do it wrong.
Love watching you guys greetings from Poland
Ah shit i almost made every mistake you talked about at the beginning. Yall just saved me from putting stretched tires on my 7.5s
Just bought my rims from y’all enki rpf1 can’t wait to get them!!!
I'm going old school jdm on my ralliart colt. It will be a first here in the UK 👍🏾💯
When’s the Fi and TJ hunt collab going to happen!? I suggested this like Nov 2019 bro’s 🤘🏽
I would love to see a "So you want a Lotus Elise". Or an Exige....Lotus doesn't seem to get enough love :(
Wicked man , wicked.
I was at a customer's house about a year ago and saw an evora JPS.
The dude said it's rare as frigg, so I googled him on it when I left.
The guy wasn't lying
That's cause no one can afford them.
@@MrTheHillfolk yep only 5 in the US I believe
Xavier King a quick search on Autotempest showed 38 results for Elise and 5 results for Exige.
The Stiggy Stardust a used Elise is a very affordable car. About the price of a new Toyota Camry or RAV4. The Exige is a bit more expensive, about the price of a fully loaded Tesla Model 3 Performance.
Just ordered a set of 18”x9.5” ADIV1 A6 in matte bronze and a set of Toyo summer tires for my 2008 Nissan Altima Coupe.
I knew almost nothing about wheels and tires before. Learned quite a bit from watching all your videos. Thanks!
offset and backspacing is where i struggle a bit. it's not the measuring part, it's the imagining how the wheel will look and foreseeing any clearance issues.
I got a 2007 Yaris 4 door. Can I fit 30" glossy diamond rims on my car ?!
Im pretty sure there gotta be one with the same fitment you asking here in Puerto Rico.
yes but dont go anny wider that a 16 inch -40 offcet
@@mikeanfernee2365 Aahhaahahahaah
Only if the diamonds are pink and you put spinners too then they will fit.😱
Mike Anfernee good choice
Lighter/stronger metal is better and when increasing tire diameter stay within 1% tire width within 9% tire calculator online is very helpful. Offset could depend on your brake setup. Good luck
I was looking to upgrade my stock steel wheels to a newer and lighter wheels from 16s to 18s but my truck is a 6 lug pattern so it was not easy... So i bought a set of 4 2019 Tahoe 18s wheels take them to a tire shop to rebore the centers my 2011 chevy Colorado bought a set of Achilles 235/55 r18 UHP desert hawk series for my drift truck project. Now im happy. Saludos desde Ensenada Mexico 🍀🎶👍
Chances of you getting lighter alloys when going from 16" steels to 18" alloys is pretty much zero unless you spend north of 10k on forged wheels. Alloy wheels are more often than not, heavier than steelies.
How about a video on the Lexus GS 300?
Ayyye eclipse gang 🤟
Thanks this helped me decide what setup I wanted to run on my bagged F100 pickup truck
20x8.5 +38 255/35 tires front
20x10 +45 +10 mm spacer 295/30 tires rear
The crown vic suspension swap is 67" wide and the stock 9" rear is 65.5 with the torino axles swapped in.
Yall just gotta measure! 🤷🏻♂️
Great informational video I drive a 2014 CHEVY SONIC LT 4DHB and want to try to get a new solid wheel and tire set up.
Sticking with my stocks, I’m too broke anyway
Same haha, plus mine shine on the ground even when it's dark so it looks pretty cool 😂
Elias Lado you could plasti dip them
Took me 6 months to get tires on some cosmis XTs took me another 6 months to get the wheels😭😭
Most stock wheels are of higher quality than aftermarket cast wheels anyway. Since I couldn't get nice wheels at the time, I ended up polishing the faces of my stock 2011 Si wheels to a mirror finish. Made the car look incredible and only took about 3 hours of labor per wheel, sand paper and buffing compound.
Just today I ordered a set of Kansei wheels for it so I'm stoked
FG Poor I felt this 🙁
Hey! the FRS on 6:30 with the Front 245/30 REAR 305/35 is my buddy @scion_pollo ...
Thanks for the info bro. I did the same thing when I bought my first set of wheels and tires from a guy. nice rims but big ole fat tires.
So much to consider, front wheel drive , rear wheel drive, off set, knock off, spacers, universal adapters, lift kit, shave wheel well. Seen it all.!!!
With everyone going on right now I don't think it's a good idea to 1. Buy wheels or tires on a payment plan or 2. Promote doing it. Just my thoughts, love the channel and love the crew. Keep up the great content to get us through our quarantine
What's your view on offset and it's relation to brake clearance? I believe they have very little do with each other and other factors like face, hub and barrel are the real determining factors.
It really depends on the wheel. Some wheels can clear large brakes despite being small. You can run a wheel such as a 19" Forgeline GA1-R on a car with six piston calipers and 398 mm discs. On the flipside, there are other wheels that are 20" which are so poorly manufactured that they won't clear the same setup. Always measure the radius from your hut to the outside of the caliper and add 4mm. That will tell you what you have tow work with in terms of inner barrel diameter. Then measure the offset from the hub flange of the brake disc to the face of the caliper. That will tell you how much room you need to clear the spokes. Those two numbers are what you need in order to know whether or not a wheel will clear your brakes. If a wheel vendor or a wheel manufacture cannot tell you what their inner barrel diameter is or how much room there is between the wheel flange and inner wheel face, then shop some place else, because they are not worth your time.
It has everything to do with clearance wtf
You get a larger negative offset in order to fit in a BBK and also to get your rims flush without having to use shtty spacers!
I’m confused with what exactly you mean mate?
Not trying to have a go at you, we all learn from somewhere so if I can help in any way please let me know and I’ll do the best I can!
Happy driving brother!
Great video!
I’m going with -12 offset on my 4-Runner
I was told by a good mechanic of mine if u change your tire/wheel size u will cause damage to vehicle the transmission and some mechanics rely on the stock size tire/rim, they spend many hours tuning and testing vehicle on stock size tire. Now he did say it's not impossible but something I think along the lines of tuning vehicles gear ratio or timing to the spec of tire size and demetion. I'm sure there is more to this then I know but I play it safe and keep same size and just change looks.
This like the 3rd one of these type videos
Adrian Middleton I’m waiting for the “don’t fill up your tires with gas station air BEFORE watching this video” lmao
Louis 😂😂 i swear i mean I’m still gonna watch though
wont have any meets if were still in quarantine ....
Just do it
There was a huge ass car meet by me the other day. Guess what? Nobody fuckin died.
I just did my homework as a first time buyer got lucky and got perfect fitment lol just my rear is like a finger Tucked in but once I get my alignment and get rid of the camber it’ll be flush asf 🤞🏼
You guys rock, thanks for all the great content.
My name is Craig. The intro really messed with me.
I would very much appreciate a so you want a Honda Accord!!
Awwwwww mannnnnn thanks 4 the vid/ info, i needed this and was looking 4 sumthin like this and HAVE FOUND IT, ALMOST HEAVEN SENT. GEEEEEE THANKS GONNA GO CHECK OUT THE SITE AFTER THIS.
So I just bought coil overs for my car. I have stock wheels and tires. Will I have problems with stock tires? I’m concerned about rubbing. I mean I won’t be able to go super low. But should I seriously consider aftermarket wheels and tires?
"A 215/45 will have a different overall height than a 255/45"
That just blew my mind!
This guy is the Wisconsin Morgan Freeman
Andoniades k...
Got this recommended the day after I bought wheels and tires
Luckily you didn't I'm still waiting for my wheels and tires was told that one rim was sent straight to me but why would they do that when there suppos to mount and balance and install the tpms sensors. They told me they would send me the tires and I can have a shop install it and they would cover $20 if I send them the recipe
That was a good clip & very educational. Thanks very much
I just bought a 1993 Pontiac Sunbird 3.1l v6. I was wondering what wheel and tire setups are out there or that y'all would recommend
Did anyone else immediately recognized the Minecraft sound effects
Watching one minute after upload lol
Im planning on getting into cars and JDM but i don’t know too much about cars and stuff. Any Advice?
Those black and gold rims in the back are amazing
Im watching this video as my wheels are 24 hours from being delivered 😬
Guys with the name Craig: “How’d he know my name 😳”
Flex Sharpp uh yeah wtf...😟 how'd he know?
The video really helped me on my 1971 El Camino SS ; he also looks and sound like Jonah Hill which also got my attention to watch the video
Bro you got me all hyped as I’m on the market for rims but when I was signing up noticed that my car wasn’t listed there. 😤😳
I watched is after buying wheels 😬
suraj dave same hahaha
Me three.
Same lol. I got Alzor 020 rep wheels which are based on BBS LM. Beautiful rims. 18x8 with Falken ziex ze950 all all season performance tires. 225/40/18. Amazing wheels for my summer ride:)
here i am with 2 inch spacers 😬
Whistlin diesel has 893 inch spacers
Unreal
What would you put on a Jeep Commander 2010? I want 20 inch srt rims. What tire would you go with for an aggressive look
What kind of rims & tires do u recommend for a silver 2017 Lexus RC 200? I'm looking for a racing type of look.
"so you want to leave the house"
Jonah hill?
I've 2014 honda accord 4 door, no suspension modifications.
Can I put in 19" rims without having to buy low profile tyres? And what's the maximum width of the tyres/rims I can go up to in front and rear.
I just want a little wider and larger in diameter rims/tyres setup. No other modifications.
Please help🙏🙏🙏
Thank you for posting this video bro!
watching after just buying wheels and tires lol
Hope they don't show up scratched like mine did. Dealing with them to fix it is a nightmare......
Bro I just bought wheels last night and i'm watching this shit right now in the morning lmaoooooo
I have a g35 coupe with avid1 av06's that have +20 something offset and my fitment i horrendous. Should I get spacers? if so what size im on stock suspension.
Hey I have a 13’ Lexus GS350 Fsport, I am currently running the stock OEM 19’ Alloys, I want to get some wider rims 19x9 front 19x9.5/10 in the back how big should my tires be or what sizes should I get if I do not want to lose ride quality along with achieving that flush look?
Do I see a new collab winderbreaker??? #airlift
Maybe 👀
@@FitmentIndustries i have a 2017 buick regal i bought new tire's that i bought for the car. But im buying new wheels is that ok for me to do?
DONT BUY WHEELS AND TIRES OK I CAN HANDLE THAN
Im looking for forged wheels on my 2014 acura tsx. I dont like deep dish wheels so plus offset is a must. First of all, im looking to drop the car a bit with some coilovers that have solid dampers. I need help finding something flush.
Could you guys make a video on the quality and weight and what has happened to people in the past of the cheaper brands like a quick list so I don’t have to keep scrolling through thousands of pages of wheels to try and find the one! I have watched a lot of your videos and I think other people would find it helpful.
562st
❤️
So I have a 2007 toyota blade and I need help with the measurements
Ig: brandon_louissaint
Shoot us a DM! We gotcha covered!
Fitment Industries what is the fitment for toyota camry 2018 Se dont want rubbing Or make the wrong choice help please
Got a 1972 buick riviera. Wanted to get some 20 inch's rims on it. Any suggestions on offset and width? Thanks!
I see some cars with stock size wheels which leaves are regular gap between the wheel well and the tire and I see some where the tire fits right into the wheel well (fender). Does this mean that they got one size higher than the stock size? Also, does it rub in the wheel well when they go over bumps or when they carry heavy cargo in the trunk? Thanks
Your fitment gallery is the coolest thing ever!
Thanks homie 🙏🏽 just trying to help out enthusiasts out there! -Edgar
Ty, gonna need dis info for my dream car
Any note for anyone buying multi piece. I owned 3 sets of 3 piece wheels all 2500+ wheels. They eventually leak and need to be resealed. One set did it in the first 6 months after a burnout. 2 piece is your best bet. The lip is 1 piece and the spikes/face is the other. Get a multi piece wheel but the inner and outter barrel is one
I have a Toyota axio. Would a 17x8 25offset fit and what kinda fitment would that be. I would prefer a flush or a little poke