JBL Wind battery replacement; teardown; disassembly
Vložit
- čas přidán 5. 12. 2018
- Click "Show more" to see the entire description.
0:28 Step 1 - Remove the speaker holding mount
0:42 Step 2 - Remove the protective speaker cover
1:05 Step 3 - Loosen these screws and open the protective ring
1:18 Step 4 - Loosen these screws and open the speaker
1:40 Step 5 - Loosen these screws and lift up the circuit board
1:56 Step 6 - Resolder these pins
2:07 Step 8 - Loosen these screws and remove the battery cover
2:22 Step 9 - Remove the original battery
2:30 Step 10 - Apply adhesive stripe and install the Cameron Sino battery
2:49 Step 11 - Install the battery cover
3:00 Step 12 - Solder these pins
3:12 Step 13 - Install the circuit board
3:29 Step 14 - Install the speaker
3:38 Step 15 - Install the protective ring
3:53 Step 16 - Install the protective speaker cover
This is the battery for Speaker model JBL Wind
Battery model: CS-JMW100SL
Capacity: 800mAh / 2.96Wh
Volts: 3.7V
Dimension: 42.50 x 31.20 x 6.00mm
Warranty: 12 Months
Difficulty: ★★★☆☆
Do you want more video with different devices? Comment us downstairs and tell us which model you want.
To know more Cameron Sino. Please follow our social media below!
Website: www.cameronsino.com
Facebook: / cameronsino
Google+: plus.google.com/u/0/102136040...
Twitter: / cameronsino
Instagram: / cameronsino - Věda a technologie
coloquei uma bateria 3,7v 1.200mAh de uma filmadora Nikon e agora quero so ver ir a tomada mensalmente kkkkk tava cansado de carregar a cada 3 dias.
Thanks for an amazing video. I now need to get a small soldering iron to fix my speaker ❤
But the battery cost on Amazon & other sites are more expensive than the price I paid for the JBL Wind speaker. So I may discard my speaker. Can I purchase the battery direct from you?
Bro I have a issue.
I'm not able to remove the first port in my JBL wind (mesh).
Thsnks for the video. Very educative!
As melhiris dicas parabens
Amigo que numero es la salida de audio integrado ic
Será que dá pra tocar a bateria por outra com mais Ampére? Parabéns pelo vídeo!
claro si , pero debe tener el espacio igual si no quedara apretada
@@Yobelcito se for 3.7v pode ate 1 milhao de amperes que rola
Uma pergunta... posso trocar a bateria dessa caixinha por uma de celular com mais amperagem?
Ex. + com + e - com -
Valeu mestre!
dificil, primeiro a bateria teria que ser de celular antigo pra ter o tamanho fisico junto a mesma voltagem 3,7v , entao ve se compensa pq bateria de cel antigo como o nome ha duz = ANTIGA
Hi! I have a JBL WIND 2 and the battery 🪫 dries really fast. The box says up to 10’hours but it dies at the 3rd hour and a half. Would it be possible to replace it for a better battery and that last those 10 hours or at least 6 or 7. Do you sell it?
I hope you can help me.
Thanks 🙏🏼
Good question. X2
todo depende del volumen , si esta al maximo y la musica tiene muchos graves no durara ni 2 horas peor aun , con el tiempo la bateria pierde su carga de lo duraba 8 horas baja 4 horas hasta solo 5 a 10minutos donde es hora de cambiar la bateria
@@Yobelcito verdade, tenho uma dessas do modelo antigo, ela no início aguentava 10 horas tocando músicas sem parar, agora, solo contiene tres horas de sonido! 😕

Pesquisar isso no Google
Hola. Dónde puedo conseguir esa batería?
x2
Amazon
Bhai iska speaker kitne ka mikaga
I don't think this is for normal user
I have problem with my jbl wind, the battery wont charged, and sound "beep" when i press on button. Can you help me plis
Lo pudo solucionar?
@@andressanguino bro tengo el wind 2 y si batería es una lágrima. De las 10 horas que dura solo llega a 3: 30hrs y muere.
that shit like music....
mujhe chahiye
1:40 official site jbl speaker output 5w, this video inside 3w =) hehehe my jbl clip 2 better
JBL WIND 3W Y JBL WIND2 5W