Types of Check Valves for Water Well Applications
Vložit
- čas přidán 28. 10. 2019
- In this video, Chris shows a few different types of check valves that are used in residential water applications.
Strength of a Check Valve Link: www.flomatic.com/assets/pdf_f...
Shop for check valves: www.rcworst.com/Valves-c80.ht...
Subscribe & “Ring the Bell”: bit.ly/2CpXSsv
Have a question or need help selecting equipment?
Live chat with us on our website: www.rcworst.com
Call our experts: 855.329.4519
Email: Customer.Service@RCWorst.com
----------------------------------------------------------------------------------------
Our Social Media
Facebook: / rcworst
Instagram: / rcworstcompany
Twitter: / rcworst
LinkedIn: / r-c--worst-&-co--inc-
----------------------------------------------------------------------------------------
We are a distributor of pumps, packaged pumping systems, on-site wastewater treatment equipment, on-site wastewater treatment systems, and custom electrical control panels for water and wastewater applications, water well supplies, drilling supplies, and water treatment equipment.
Because of this CZcams channel and the kindness of Worst answering some stupid questions, I personally, without any experience pulled my old pump that was 220 feet down and replaced the pump, wire, pipe, control box, pressure tank, breaker and installed a pitless adapter in the well casing in the home I bought. The original system was put in wrong, cheap and cheesy, now I have some piece of mind. You guys saved me a bunch of money I didn’t have, thanks a million.
Happy to help Shane, way to go!!
What video helped you accomplish all this ...I too am in the same boat
@@tonycordero955 what do you need to know? They have a bunch of awesome videos but there was a few questions I had that they answered for me in their videos, which was very kind of them, most of these creators won’t do that.
This guy is great, Thank you for all your helpful tips and info.
Gotta love that yellow vice!!
I have an above ground jet pump and I think I have either a leak in the line or a bad check valve or foot valve. How far down the well is the check valve typically?
Sir, which is better to use in jetmatic manual pump, swing check valve or the spring check valve? 40 ft deep..thank you , looking forward from hearing you sir
Have a good day sir i would like to ask which check valve usually use for marine/salt water., thank you
can you install a check valve after sand point, from there install pipe? This is configuration of old point, was working fine for 30 years
Hi, I have a deep well jet pump 1/2 horse.
Should the check valve be installed on the upper nozzle or the lower one?
The pipes coming from the well extend about two feet long outside the basement wall before getting into the pump. How far from the pump should the valve be installed?
Thanks!
You'll have to check your manual or call the manufacturer of the pump.
Does the Check Valve need to be open 100% or is it ok to close it some?
Would size matter? A 1 vs a 1 1/4 inch
Best u show us vedieo with water output
I was looking for a check valve for my well. I found a stainless steel valve 1-1/4 (same as the pump pipe). The description says screwed pressure: 1000 PSI. Is there a pressure range I need to know? Can this work with a 1 HP pump in a 50m well?
Yes, you shouldn't need to worry about pressure ratings if you're only using a 1 HP pump.
I had a 1/2 hp submersible replaced with a 3/4 hp about a year ago. Since that time we have been getting a strange clunk. Plumber came thinking it was a check valve but changed out that part, pressure tank, switch and guage. $500 later still have clunk pump cuts out at 70. I got it down to 65 but still the clunk. I asked on a forum about it and I was told there is a check valve in the pump and having a second one inline by the pressure tank could cause the clunk and cause a problem. What is your opinion? It has a 30-50 switch adjusted up for 40-60 which if I replace with a 40-60 switch might get the upper pressure down to proper place but the clunk is the main thing.
There are some gadgets that fit around the pipe inside the well casing that prevent the pipe from hitting the casing. They are usually rubber. What happens is the tork of the pump when it starts or stops causes the pipe to bump against the casing. They are supposed to be installed when the pump is replaced...I'm not a well guy and don't know the spacing between them...But maybe??
Can you explain how many check valves are needed?
For deep well, one at the bottom near the pump. But also one at the top?
Short answer: one right after the pump and every 150' after that. We also have a video that goes more in depth: czcams.com/video/HyUP7Y9XvgQ/video.html
Hi ,but how to drain thé water from thé pip After thé check valve ,
Can you talk about those ultra violet filters please?
We have a whole playlist on them: czcams.com/video/HoFFui4LGZo/video.html
Which C-valve works best on a RAM pump?
Brass swing check
I watching your video pressure machine
Problem is the pressure machine
First!!! 🤘🏻😎🤘🏻
17th,, haha