Fixing a vehicle with no TCM communication
Vložit
- čas přidán 13. 07. 2024
- **Want to own the tools I use on this video ?? Click on the amazon link down below **
Lisle relay Kit link- amzn.to/3hWASZc
Test Light- amzn.to/3z1Pdxa
Long Reach Pliers- amzn.to/3PFKnez
Disclaimer:
Due to factors beyond the control of Oz Mechanics, I cannot guarantee against improper use or unauthorized modifications of this information. Oz Mechanics assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Oz Mechanics recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Oz Mechanics, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Oz Mechanics. - Auta a dopravní prostředky
That was amazing.
You actually took the time to use the technology that is available today and used it in the proper manner.
By doing the proper research and getting to the root of the problem, you took all the guess work out of the equation,
Saving the owner money, you made more money in less time.
That is a win, win, if there ever was a win, win.
You are a wizard! I wish I could find someone as experienced and thorough as you to fix my wiring Can issue
Agree
Right
Wow ! You are what an actual “Technician “ is supposed to be ! Unfortunately Most are just parts replacers, Nice run through process. You would be my go to guy for everything.
This video saved me so much money!!! I was about to replace my whole TCM module.. Thanks for the information 👍
As a hvac tech for 20 years, I stay by my volt meter. Its your closest ally in a world of tecnocracy! Find shorts in a bundle of wires quick. Ohm out your wires guys!!
I just want to say thank you from all us car guys ! Fixed my issue
2-24-2024 the day OZ mechanics saved me some money tell me why i checked those diodes and it was backward my car was down for a year trying to figure it out my dude THANK YOU man seriously means alot .....
Dude this is awesome. I’m glad this video helped out. Thanks for watching
Thank you Oz. Good job again. Have a blessed and safe week to you and your family.
Thank you sir I thought my tcm was bad I did everything but check fuse because I didn’t think it had one. You literally just saved me 1200$ gave you thumps up and subscribed
Awesome to hear that brother. Thanks for watching
Your only person I've found that explains it and shows diagrams that makes sense to me. Thank you. This is going help me get my jeep shitbox fixed finally 😄
despite leaving the field i am still watching your videos and let me tell you you are one hell of an instructor , thanks for your videos
A dealership would've said you need a new transmission.
And they would have charged ya for a new one!!
Exactly what they did for me and still it acts up 😢
Without hesistation!!😂😂
THANK YOU! Great Troubleshooting job. Good instructor too. I have a 96 Jeep Cherokee that will not go into any gear and move. It will shift out of park to R to N, D to 1-2 but no movement. I have a troubleshooting light and may just try to trace the TCM signal like you did here. Just to make sure I am getting the voltage. I have never used the trouble light but there is a first time for everything! Especially when you made it so clear.
Always good to look over fuses and see if you notice one out of line first also and often saves even more time but yeah great job going through the process for people is even better
Everytime I see your videos I just say to myself that guy's good. When you love what you do its all easy. You fixed my F150 about three weeks ago and I knew then you were the man. Keep making those videos and remember people gonna hate you cause they ain't you. God bless
Excellent work Oz !!! Clearly explained and well shot to link image to verbal explanation !!! Big thumbs up !!!
I liked your step by step procedure for hunting down the problem.
Thanks! I was bracing my self for the $1200 TMC replacement I was told was most likely the reason I had tmc lost communication. I watched the video and just bought the relay on a prayer…just like that all was good!
Sorry TCM transmission control module
Awesome, this is one video that I'm saving. Thank you
Thanks for Fixing my Car! 🙏🏽🙏🏽🩸🩸 OZ You never let me down Bro Only mechanic I TRUST And Great Prices !! Always Quick & fast Getting me Closer to gettin on that road & back on they ass 🏁🏁 6.1 Liter SRT8 GANG!! 💨 🤘🏽
It a 5.7 🤣
Helped a lot had same issues on same year and model with a new motor to and but mine was the wire under the 15 amp fuse in the box that was not making contact but your video took me to the area of the problem. Thanks for taking the time to do video
I learned something new, you're awesome. Thakyou , you're doing a great job.
First of all. Your instruction was simple and amazing. You showed visual papers, steps with instruction etc. I need to check my TCM Relay for shifting issues. I notice a pattern with car of fuse and sensory blown out. I will check this out before anything else.
Why can't I find a fucking honest mechanic like this? Tired of getting ripped off
They’re out there like every other profession. Recommend checking out google reviews when looking
Thankyou soooo much you saved me .. I don’t have words to say lot of respect and God bless you.. i went to sooo many garage but they cant find the solution.. finally your video helped me ❤️❤️❤️❤️❤️❤️❤️
Awesome. Glad to hear this video helped out
Follow the process every time. Amazing how often it's something simple 😜
Your sharp as hell !!!! Good work !!!!!
Great video saved me a ton of time and money
Bro! Thank you so much for this video it’s helped so much! Was able to get my car running again, your a life saver ha👍🏻
Awesome. Glad to know this video helped out
you're the real deal.... congrats!
🤗
Justo estoy pasando por este problema, muchos mecánicos le han metido mano a mi mi auto y lo han dañado del sistema de enfriamiento y ahora perdió comunicación con la TCM. He testeado los fusibles y parecen tener conexión pero revisaré les relays y todo a mayor profundidad esperando resolver el problema. Muchas gracias por este gran video ha informado de mucho!
Congrats on that video !! Muy bueno !!👍👍
thanks for your time to teach, good job God bless you
Thanks for being who you are ... I just subscribe and. Will watch all videos.. keep up with the great job ...
nicely done OZ
Thank you bro! I wasn’t getting any power to the 15a with the test light, went over to the relay and there wasn’t a black cover over it, so i changed the fuse and relay everything went back to normal nomore limp mode. I really appreciate you bro!
Hey man do you happen to be Dodge Charger owner? And we’re your fuses bad or not put in properly? I’m going through the limp mode thing. Car has been down 2 weeks and I miss my v8 😞
Diodes can overheat and blow just like a fuse, which is probably why the are placed in a way that allows easy replacement. Unfortunately the little knob on the side didn't prevent if from being replaced backwards. I rarely find occasion to use the diode testing tab on my multimeter, but testing a diode is very easy, and you can even assess forward voltage drop. Excellent case study!
@@liviu2004 Yes, Zener diodes in particular have a breakdown voltage which makes them useful for overvoltage protection. If reverse voltage spikes too high, the diode allows a path to ground, which protects other more sensitive devices in the circuit from overvoltage. Like a fuse, it is hopefully positioned to fail at a spot that is hopefully easy to repair.
Also, one can use a LOW VOLTAGE ohmmeter to test the diode. It will show higher resistance when polarity is applied backwards. I capitalized the low voltage wording to prevent someone from frying an otherwise good diode while testing.
if bring to local mechanic may tell you need to change $ 1000's xyz modules along with $100's labor fee
Thanks man you are awesome, and this ain't even my problem but you fixed it so well, I kinda wish it was my problem cause atleast I know it would be fixed after you , so thanks on behalf of whoever may have this problem and hopefully I don't , but at least learning from you it would get fixed thanks man ...
**Want to own the tools I use ?? Click on the amazon link below to get my top 5 Tools I use**
Automotive Test Light- amzn.to/3z1Pdxa
Flexible Backprobe- amzn.to/3Pyr3zO
Multimeter- amzn.to/3PbuT23
OBD Scan Tool- amzn.to/3zaNWnq
Wire Piercing Probe- amzn.to/3OecWhT
Nicely done.
Good work man! Damn i need a mechanic like you around
***Want to own the tools I use on this video ?? Click on the amazon link down below ***
Lisle relay Kit link- amzn.to/3hWASZc
Test Light- amzn.to/3z1Pdxa
Long Reach Pliers- amzn.to/3PFKnez
Maaan your the coldest I will most definitely keep using your page as my new go too
Appreciate it. Thanks for watching
Thank you for sharing.
Good work. Gotta have the diode in the orientation.
great info oz this video helped me repair my 07 srt8 u0101 thanks for the very imformative video☺☺
EXCELLENT VIDEOING, PROCESSING, VOLUME FOR VIDEO YOU HAVE A GREAT GIFT FROM GOD, THANKS!
good diagnose Oz
Nice job, you make things look easy .👏👏
Alllllllllot of training
Que chingon video!! Very helpful i fixed m y car with this video..muchas gracias!!💪💪💪
Thanks for stopping by and watching Rodolfo
Great video.
You made it look easy bro! Great work! Where do you get your schematics from?
This guy is the truth
Good thank you for sharing
your videos are so addicted!!!
You are damn good Boi! I felt at first like you just one of those guys who likes to just talk and waste time but dam Boi your slow methodical approach was outstanding...got dam Boi you helped me out tremendously!thank you!
Dude you need to move to Greenville sc so i can pay you to work on my car...😂 excellent video!!
This really helped me
Thanks you I bet you solved my problem as well.
Thanks you
Thanks i put diode in back wards Thanks for video was getting crazy frustrated til video
bro thank you wicked man
Great job bro
Thanks man 💯💯
Grasias por el video
You are the man bro
Outstanding bhai
Tech installed defects. Nice job sir
This is a grate video. Amazing.
Thanks for watching. Feel free to watch the camaro series that’s one of my favorite videos I’ve worked one
Super vidéo more vidéo 👌👍
Excellent
Niiiice video!
You now have a new subscriber , I'm on board let's get it done ...
Awesome. I’m working on a new video as we speak showing what Amazon spark plugs can do to a car
Hey can you give me some advice on what to do after replacing the TCM sensor on my 06 dodge charger ,do I have to reset anything to get the new one to function,I hooked it up but no difference ,I was thinking I probably pose to then reset the computer to connect with new TCM sensor, for it to work, please help on what to do please ...
great video-replaced CP3 injector pump-then tried AC abd clutch didnt engage(refrig ok) i can get to all the modules with a scanner and get many U codes--truch runs fine
I'd feel your emotion as soon as I heard the click after you placed the fuse in its right position, thanks for sharing your knowledge
nice job 👍🌷
You are good professional I like your way to diagnose 👍🏻
The "Tech" who installed the diode backwards thinks diodes are like fuses, which can be installed either way. Additionally, he has no power of observation for details, such as the keyed bump on the diode jacket, to indicate proper polarity insertion into the board.
Thank you for the video.
Good job👍👍👍👍👍👍👍👍👌
You are a semi god on cars
A diagram is a techs best friend💯
Wow amazing! I wish you were in california D:
My youre the men thank to you i git my car working good thank you again
thumbs up !
Is the rear fuse bix same in later year srt8 charger ? Will the TCM fuse be in same location? Great vid ❤
OZ you always impress me, can you do a video on analyzing Mercedes transmission code e.g sporadic, implausible codes
Troubleshooting 101 right here folks. Unfortunately, most would just start throwing parts at it.
Always great videos Oz, thank you. I have a 2006 Charger that I'm struggling to fix an intermittent stalling issue. Like many of your videos, I have been to several different shops now and none of them can figure it out. You wouldn't happen to know anyone in the NJ/NY area that knows what you know and works like you do?
I have a couple of friends that work in NY. What part do you live at ?
@@OzMechanics Thanks for the reply. I'm in South Amboy NJ, zip code 08879. It's only a few minutes from Staten Island, NY. I'd be happy to pay for their time to come over to me as it is not starting at all now, or I'd take it over to them. Thanks again!
awsome work,,do you have a similar fix for a 2009 Chevy Impala 3.5, half the fuses legs won't light up,transmission only drives in reverse
Where did you get those relay breakout /test box kit? I have never seen that before
Hey awesome video. Where can I get a wiring diagram for a 2014 Chrysler 300
Oh my Gosh very nice video . Someone pull out diode but obviously knows nothing about diodes are for ?
Well , its crazy but true it happens 1 in a 100 .
Greetings from Venezuela. Nice video very technical support.
Awwwsome!!!!
Thanks for the great video I just have a question you might be able to help me out with ,I've lost communication with my TCM on a 2009 2500 silverado I've checked fuses but haven't gone any further ,do you know if the TCM would have a diode or a relay in a 2009 model I've tried to download wiring diagrams but cant real see any ,Thank you for any info Dave
great job investing
that was crazy, i guess people be in a rush
Thank's for the information, I help me.
Thank you for watching
If you feel like this video helped out, feel free to support the channel by donating. Just one click away on the link below, to help support the channel :)
www.paypal.me/ozmechanics
I don’t see the tcm anywhere. They told me it was underneath the power steering but it’s not. 2012 Dodge Charger 3.6L Gas.
Great video! What is this Snap On Diagnostic Tool model you are using? Thanks
It’s the second generation. Verus d10
Good video ! Question if I have check engine light on and I get no code eccept secondary codes what do I do? Secondary are no communication with tcm and crankshaft sensor? My car stalls sometimes, and even dies sometimes, also engine light will sometimes even go off but got it tested 3 times when it was on, literally getting no first/main codes. Just secondary(possible problems, nobody can figure it out. I have 2010 dodge avenger 2.4 Any ideas? Would really appreciate it