Mini-Z MA-020 **Stage 3** Upgrades Part 1 Install
Vložit
- čas přidán 25. 08. 2024
- Sorry for the long break between videos but I'm back and in this video I pick up where I left off with the Stage 3 Upgrades. There will be atleast three parts to the stage 3 set up with some minor upgrades in Part 1 including the X Speed Motor swap while Part 2 will mainly cover the Counter Steer Mod with multiple different gear ratios I will try and some Body Kits for some unpainted car bodies. Part 3 should mostly cover how the car handles after everything is installed and any other changes I may have made along the way. I also will do some videos on the car bodies and how I glued on the body kits and painted them in the near future, so stay tuned.
-Also in the video I mention the motor mounts are for 90 to 98mm bodies but they are actually for the different gear ratios for the pinion and spur gear combinations shifting the motor closer or further away to line up the bigger or smaller gears.
If you haven't seen my other upgrade videos, here's the links to them:
- Stage 3 Upgrades Part 3 Update --- • Mini-Z MA-020 AWD *Sta...
- Stage 3 Upgrades Part 2 Counter Steer Mod --- • Counter Steer Mod** Mi...
- Stage 2 Upgrades Install and test drive --- • MINI-Z MA-020 AWD **ST...
- Stage 1 Upgrades Install and test drive --- • MINI-Z MA-020 AWD Upgr...
- Mini-Z's and LEDs headlights, taillights and digital underglow --- • MINI-Z's and LED's **...
- Mini-Z MA-020 AWD Unboxing --- • MINI-Z MA-020 AWD **Un...
Time stamps
00:11 - Intro
01:55 - Rear Camber Knuckles Tear Down and Install
16:25 - X Speed V Brushed Motor Install
31:01 - Wheel Adapters for MR-03 to MA-020 Conversion
32:32 - Tungsten Weights
Car:
- Kyosho Mini-Z MA-020 AWD
*Stage 3* Upgrades:
Part 1
-PN Racing Rear Camber Knuckles Blue 1.75 Degree
-Kyosho X Speed V Brushed Motor
-Tungsten Weights
-Wheel Adapters for MR-03 to MA-020 Conversion
Part 2
-Counter Steer Mod 1.25, 1.5, 1.75, 2.0 Gear Ratios
-WLToys K969 Spare Pinions and Diffs for Counter Steer Mod
-Kyosho 4x4 Crawler Drive Gear Set
-MA-020 AWD Spare Pinion and Spur Gear Set
-3d Printed Body Kits and GT Wings for Unpainted Car Bodies
-Most of these parts I found on:
AliExpress.com
Ebay
Amazon
WolfRamRC.com
-Where I found the body kits for the car bodies:
Garage-hiro-online-shop.com
GET IN TOUCH
➔Email -*airtogroundRCFPV@yahoo.com
➔➔Linktree- *linktr.ee/airt...
➔➔➔Tiktok -* / airtoground_rcfpv
#kyosho #kyoshominiz #miniz #ma020 #howto #r34 #r34gtr #awd #rc #rccar #drift #drifting #driftcar #rcdrift #rcdriftcar #upgrade #rcdrifting #rcdriftcars #leds #led #ledlights #ledstrip #diy #tutorial
As someone who is just getting into mini-z drifting, i love these type of videos helps me navigate what mods are useful to my car. keep the videos coming!
Glad I can help you out my friend, I appreciate the comment and will do my best to post more videos when I can
Nice video, keep up the good work!
Thanks man, will do!
Love the video but please lower the music a bit kinda hard to hear you over the music ..
Sorry man, it's hard to tell if its too loud while editing until after I upload and its too late. In the Part 2 video I think I fixed it though, thanks for the heads up I appreciate the feedback
No prob . Just got a awd and rwd mini z so I’ll be looking forward to the vids .
@@samuraib0b Nice, hope you have alot of fun with them. I'll do my best to get more vids out when I can, I still need to make some on my MR-03s and my K969 rebuild as well.
Ha ! I also got a k284131 that I swapped the tires to drift and upgraded the differential to lock them cuz I wanted the leds and upgraded TX vs the k969.
@@samuraib0bYea the stock TX and parts suck on the K969, I got mine like a year or two ago and spent around 50 on it back then, beat it up real good so now I gave it new electronics, RX/TX, brushless motor and made it RWD and also 3d printed some parts to give it up to 90 degree angle for the steering, so basically not enough close to what it was originally lol