CHEVY & GMC POP N' LOCK INSTALLATION | Locking Tailgate Install
Vložit
- čas přidán 14. 09. 2017
- I put this how-to video together showing the installation of an aftermarket tailgate lock for my 2014 GMC Sierra truck. The installation is the same for the Chevrolet Silverado.
For more pictures and information on my projects, please check out my Facebook and Instagram pages!
FACEBOOK: / milkcrate82
INSTAGRAM: / milkcrate82
SUBSCRIBE: / milkcrate82 - Auta a dopravní prostředky
![[HOW TO] Install OEM Power Locking Tailgate in a 2015-2019 GMC Canyon / Chevy Colorado (Retrofit)](http://i.ytimg.com/vi/8kxyof_vOxw/mqdefault.jpg)
![[HOW TO] Install OEM Power Locking Tailgate in a 2015-2019 GMC Canyon / Chevy Colorado (Retrofit)](/img/tr.png)
Ran through the installation last night with your video going at the same time, worked perfectly. Thanks for putting this together.
This is a great video. Important note though to those doing this at home...there are TWO solid grey wires in that bundle. The one you are looking for is the same gauge of cable as the pop & lock wires, as is the brown/yellow.
Just did this today and your comment was helpful. I tried the gray wire that was smaller first. Didn't work. The one that worked is more of a blue-ish gray and that one worked. I think the guy who did the instructions was a little color blind...
Wonderful,helpful video - just installed mine in 45 minutes thanks to this video. You are the man!
Thank you!! Did it on a 2019 Canyon. Wires were the brown/yellow and the gray. Everything worked like a charm!
I really appreciate the time and effort you put into these videos. They have been really helpful thank you
Great video! It's useless to me because I don't need it but I was really enjoying the video. So, I kept watching! Awesome!
Thanks for the explanation on the installation. I have a tailgate with no lock and we have the hose clamp theft deterrent method. This was a quick fix while on the road.
You can leave your tailgate down (long loads laying over tailgate) and still prevent it from being stolen for as little as a dollar & 5 minutes of your time.
All you need is a simple 2" hose clamp (worm drive). Put it around the slotted hinge cup on the passenger side tailgate hinge only. Also I recommend you put it on backwards so that the screw is facing forward. Then just before getting it completely tight, roll it 90 degrees forward so that when the tailgate is closed the screw is facing downward. Close the tailgate, crawl under the truck & finish tightening it from underneath.
No, this won't stop the really determined thief, but to get yours he'll need tools and time. Most likely he'll leave yours and go on to easier pickings.
Thanks. Bought, installed and worked perfect.
Thanks for making this video. I just installed mine last night.
For my 2015 chevy Silverado 2500HD the part # is PL8140 from Amazon. Also I've found 4 brown and yellow wires in that bundle, the right one is the thicker one. There are also 2-3 gray wires as well, the correct one I've found it on the bottom of that bundle towards the center of the truck. Connect the green to the brown/yellow and blue to gray (I've solder my wires)
dude, you are awesome! Thank you for this video. I really appreciate you doing this. Thanks!
Mine locks with the key fob. It's really useful, I'm glad I still have my tailgate knock on wood.
Best explained than others . Thank you sir
I recently found your channel from your last video and just wanted to say that you are very good at explaining what you are doing and making sure that what you are doing is in camera frame. Keep up the good work.
a trick : you can watch movies on KaldroStream. Been using them for watching all kinds of movies recently.
@Khalil Layton definitely, I've been watching on Flixzone} for since december myself :)
Great video sir!
It helped me a lot!, Greetings from Texas
Thanks for the video sure it's going to be helpful
didnt really needs this since our truck tailgate locks up via remote and opens down on its own.. but ur video looks very useful.... thanx
The central lock system is great my 14 Ram has that feature from the factory
Super super helpful, thanks.
Just ordered this setup for my 2014 SLT. Your video convinced me. My lock cylinder is does not work though. I just bought the truck so I think my key is just wrong. But I will just remove the tang from the cylinder so it will only work with pop n lock and the fob.😣
Ayee you from Dallas niceee !
excelente trabajo bien hecho. saludos.
milkcrate82, celso guajardo villarreal Saids That: excellent work well done. greetings.
Thanks!!! Turns out there were two identical gray wires… swapped to the other gray and all good😅
Great video! Question, does the manual lock cylinder still work? I’m just curious in case the actuator does again would you still be able to get the tailgate to open manually? I have a bakflip cover so I don’t want to have to mess anything up to replace a broken part if it stops working while it is locked...
Cheers!
Ps I don’t have a manual lock right now but if I need to order one as a backup plan I will.
Thinking about this for my colorado, if someone busts my window and breaks into my truck can they unlock my tailgate from the door panel?
Hi, i need to do this on my 09 ram, they show the use of relays and hook up to battery before you connect on the kick panel, . now watching this video i wander, can i by pass that step? The pop n lock will get power when you press teh key fob, right?
nice to have it work off the factory fob
So how did you remove that plastic cover over the driver's side wire loom?
nice install
I watch your video and read the direction. Following both to the T and when I finished my door locks didn’t work. So I disconnected the quick plugs in the tailgate and they work again. But the pop lock never did. I supplied the actuator with a ground and power and it works well just not when it’s connected to the brown/yellow wire (big or small one). Got any advice Milkcrate82?
Great video but I’m having the hardest time finding the pop and lock system I have a 2015 gmc sierra 1500
So basically if I install it and have the same issues with the solenoid, I should just return it to Amazon for a replacement?
I put this on my 2015 F150. Kept the thieves from getting to it without damaging my vehicle. They always move on in Detroit if they can’t get to one, or alternatively strip the vehicle down to the frame. They offer the locks on the 2018 and up F150’s.
To clarify, when I said useless, I meant because I don't need a pop lock but it was educational watching!
gotta love new toys, LOL
Awesome video. I watched this before installing on my 2015 GMC Sierra yesterday and had it on my laptop out there with me during install.
The good news: Install went great first try (i'm sure in big part due to watch this video)
The bad news: I am having the EXACT same issue as you (around the 12 min mark on your video) where it unlocks fine but the electronic lock is not pushing it all the way to the lock position. Its as if the actuator does not travel far enough on the lock motion. I bought it via amazon and will be contacting pop and lock today. I'd be curious if theres some sort of range adjustment that can be adjusted on the actuator or if not will have them send me a new one (hopefully won't be a PIA and take 4 months like for you). Any tips would be great. I'd prefer to get it fix vs returning it due to the time i spent installing and dealing with it so far. Will see how Pop and Lock's customer svc is. Hoping for the best but we'll see...
ps. Is yours still working??
Just following up on this comment. I spoke with Pop and Lock technical support. The are fully covering the issue (sending me a replacement accuator) 100% standing behind their product and I gotta say extremely impressed with their tech support (Amber is Awesome!) and the customer support in general. They confirmed that if I have any issues after swapping the replacement actuator they will see it through to the end. They are aware I did not purchase this directly through them but via Amazon and are still standing behind it. It's shipping to me today, 1 day after my call to them. Kudos to Pop and Lock customer service and standing behind there product!
They also sell a lock on Amazon that fits on tail gate to prevent theft so it can't be removed. It's a shame it took so long to receive new part, I mean Come on companies!
I dont think I'll be purchasing from them any time soon...thanks for the heads up...i wouldn't be surprised it failed later on down the road
What’s the model number for the new one they send u?
I saw your truck on eBay glad you didn't sell it ...
Been wanting to do this to mine. But I need to find another company to buy from
John Kelbe Pace Edwards builds much better remote locks than Pop and Lock. Pop and Locks work fine in warm climates but if your in cold climates I don’t recommend Pop and Lock.
great video !!! but when you was using the blade to cut the insulation on the wires.....DUDE that is not something some needs to repeat. please us caution when stripping jacket back.
by the way, does it still work? lol
How's the part holding up? I plan on installing this same item this weekend. Lol
Why not just spend a few dollars on a hose clamp and put it on the passenger side where the notch is for the tail gate to come off. How many people trying to steal it are going to bring a nut driver and be willing to take the extra time and possible get caught cause it will take twice as long
You don’t even have a tonneau cover and if your bed is open you could just put things back there but if you were loading something why would the keys be in the ignition ? Cool vid tho good quality
K Swervo one time I was loading up bicycles in my truck on a hot day. I wanted to have my truck on to let the A/C start up and let my girlfriend sit and relax. As I started to get the bikes, I realized I had the tailgate locked and I had to turn my truck off just to unlock the tailgate. It’s a small little feature that would be useful to have I guess. I could have simply pressed the unlock button on the door and never turned my truck off but my truck didn’t come with that feature and I wish it did.
January???
This video was just uploaded a few weeks ago
it was easy until it gotten splicing, testing and connecting wires. Its all good I'll keep my tailgate as is. Once I get more money and sell my pick up, I ll just buy a higher end one with this option already factory installed. It was cool to watch though
Why did you cover your license plate
next you will want a remote control for your television
a thief can just take the cover for tailgate off and steal it omegalul
This is Handy for people who have bed covers.
A thief if they wanted to could just use a car battery and jump out the actuator
Buy a ford
Why would I subscribe? You don’t answer anyones questions.
Awesome video you really made this extremely easy to follow and gave me the confidence to try it out myself 🫡