How to use OBS with ATEM Mini Pro for Livestream
Vložit
- čas přidán 21. 08. 2024
- How to use OBS with ATEM Mini Pro for Livestream
Our Gear
Atem Mini Pro
amzn.to/3w0mTMF
Sony Zv E10
amzn.to/42p1etx
Blackmagic PCC 4K
amzn.to/3Sk01PD
Thunderbolt 4 Cables
amzn.to/42s55WD
Motion Graphics
motionvfx.sjv....
Restream Platform
restream.io/jo...
Videos to check out:
How to livestream with Blackmagic ATEM Mini and OBS
• How to Livestream with...
Music we use
Tropicana - Music from #Uppbeat (free for Creators!):
uppbeat.io/t/a...
License code: FS6UQ3X3XPVSEQM4
#livestreamsetup #howtolivestream #churchlivestream #blackmagic #obs #livestream #atemmini
Wow, so glad I found this video. Clears up a LOT for me. I was almost thinking of selling my ATEM Mini Pro, but this changed my mind. Now I understand how to combine the two. THANK YOU!!!
👏🏼👏🏼👏🏼
Hello
I can't thank you enough
you are awesome
ATEM PRO really doesn't do anything important for the stream without OBS and you should use OBS to improve the quality of the stream.
As always, great content from you
Absolutely! Thank you 🙏🏼
Thanks a lot for your help. What the ATEM doesn’t provide it is useful to use OBS for some extra features especially background music. God bless.
Thanks for watching! They are a good complimentary pairing for sure!
If you only need to bring in a still or a video to the ATEM, I would just connect a mobile phone as one of the sources. A mobile phone can be used for presentations or anything that can be displayed on your phone. You can even use it as a camera source with the BlackMagic Design camera app.
I know. It’s awesome! I actually have a short on that!
Question that I'd love your feedback on....our small church plant setup: 1 laptop that does everything....running Worship Extreme, OBS with 2 cameras only....with some cheap Amazon capture cards...that work 80-90% of the time, but do freeze.
I haven't felt the need to upgrade to the ATEM Mini since we don't have more than 2 cameras and the laptop has enough inputs to handle everything....but this seems like it would be more volunteer friendly, maybe.
So my questions....what would we gain by switching from our current setup to a setup like yours? THANKS!
I think your setup sounds good for now. If you wanted to add a third camera is where you’d want to look into an Atem. Adding the Atem allows for easy video switching but we run it through OBs so it would add an extra step or two to your process and in turn make the process a bit more complex for volunteers
@@Ministry-Hacks I think next time my capture cards freeze we may upgrade. Super frustrating when that happens lol. Especially when you have a new volunteer. Thanks for the video and the comments/feedback.
Reach out anytime! Just keeping dialing things in and trying new things
How do I connect my atem mini pro to my pc? Do I still need a capture card?
Thank you for this, made a few things clear.
Thank you for watching!
Is there a midi controller you use for your ATEM? What is it and how do you use it? Great video and subject by the way.
No midi controller. Just the ATEM and OBS on our MacBook
I have elgato face cams they are not showing up in the atem mini. So i need something else for the camera to show
Can you adjust the output resolution on the cameras? Atem highest resolution is 1080. Also adjust the FPS if you can. make sure your Atem is setup for the specific FPS your cameras are set to. Otherwise if your cameras fps is higher than the Atem it’ll be a black screen. I’m not familiar with Elgato cameras tho but that’s my experience with other cameras not working.
@@Ministry-Hacks the atem mini doesn’t power the camera. I looked at some other videos online. I would have to get a cheap camera, mainly a aps-c camera in order to use it. The elgato are basically useless
Great video and this is looking like something we are going to do! My question, and it might be a dumb one, but are you streaming through the ATEM Mini Pro or are you streaming through OBS and using the ATEM Mini Pro as solely a switcher?
We stream through OBS and use the ATEM as a switcher. It allows us a little more versatility with putting pre recorded intro videos in
@@Ministry-Hacks Sweet! That’s exactly what we plan to do with our sports livestreams. Thank you for the response!
Anytime! Happy to help!
I use atem mini pro and pro presenter for some graphic features
thanks for video, will try to use and obs
Pro presenter is a great option as well!
During our livestream at Church is it possible to bring in a small video from PowerPoint or a Scripture from PowerPoint that our Pastor projects on the screen during the livestream?
What kind of setup are you running? I know you can with Pro Presenter, not sure about power point but I would assume you could
Thanks dude! you're pretty awesome!
Glad to help! Thanks for watching
I have two serious questions
1- When we can connect two cameras with different angles to Nanana, why should we use Sasasa?
2- When I enter the image of Sasasa into Nanana, the CPU goes up and my image is corrupted.
Can you clarify what nanana and sasasa are?
Wow, it was my mistake 😆
When I enter the image or camera of Atem in OBS, the CPU goes up and my image is corrupted.@@Ministry-Hacks
How do you setup the atem mini pro into OBS? Just trying to stream in OBS
You need to add a “video input device” in OBS and select black magic design. And if you want the audio from the atem you also need to set an audio input device as well. I’ll try and put together a little video here soon showing how to do this. But I hope this helps in the meantime!
@@Ministry-Hacks that would be awesome to do a step by step for us noobs. Not a lot of info that I could find on getting it setup with a BM
Also check your computer sound make sure it’s not muted. New to obs getting away from wirecast
Thank you for your video! Question, do you have any delay or audio out of sync with the video?
Not on the stream that we’ve noticed.
How do you get obs to recognize cameras plugged into stem mini pro
You have to create a source in OBS
can you have a split screen in obs with two different cameras using the atem mini pro?
Unfortunately no, but you can set up a Picture in Picture on the atem that will allow for two inputs on one screen in OBS
We are using much of the same gear. We have one major hurdle to overcome, the sound of the worship singing. No problem with the single microphone use, just when we sing the sound is all choppy and mostly nonexistent. Any idea what to look for?
Worship is the hardest hurdle with sound. Most likely your mix is peaking out and you need to turn down the mix you are sending to your Atem or whatever you’re using. Or if you have a noise gate or threshold set it’s hitting that gate and cutting it out. And then you can fine tune the volume up or down within the atem.
Can the video show through Propresenter?
We haven't tried, but I am sure there is a way if you setup a new Screen Configuration for the video input
When I enter the image or camera of Atem in OBS, the CPU goes up and my image is corrupted.
Make sure all your resolution settings are correct in OBS. And possibly, if your cpu is older it may not be able to handle the work load OBS requires.
excuse my limited knowledge, but I've been using OBS Along with a Software called TouchPortal. I have it running both on my mac and as an App inside my iPad v7. This allows me to use it as a switcher while running on my iPad, currently I'm able to add any type of transitions, lower thirds, show the persons title / name as they are giving their talk, and even run a movie clip (intro) and after a set amount of time jump over to any of the camera angles I have pre assigned. Thus allowing a more auto flow from Intro to Live Camera view. Again I'm not sure if I'm missing something the ATEM mini can do that my current set up does not already have. Besides recording multiple cam view and audio *under the new Atem Mini Pro ISO. Any one?
Sounds like you have a nice little setup! Atem is just one way to do it, not the only way. But you can definitely do all those things you mentioned on the Atem using OBS as well.
damn man, you literally skipped the very first step... adding the blackmagic as a source.
Haha, whoops. Made this video primarily to address WHY we use the atem with OBS. Sorry if I didn’t give a full tutorial. Always gotta add the source 👍🏼
Great
🙏🏼
I have atem mini pro
And the resulting video is very laggy regarding that my output is 4k and settings are 800 iso , shutter speed 1/50
Any idea how do I solve the lagging problem ??
Are you streaming or are you recording? The atem only puts out 1080 resolution either way. But if you are streaming it could be your internet connection causing the lagging. Iso and shutter speed shouldn’t cause lagging.
@@Ministry-Hacks I am recording not streaming any idea how to fix this ??
What are you recording to? Are you using the atem to record or a different computer or software? Check your bitrate and resolution settings in atem or whatever you may be using
Atem mini pro doesn’t have 4k output so that may be part of your problem. It could be clogging up the cache inside the atem because it has to encode all of that, and it will put it out in 1080 max resolution
Does the advanced scene switche OBS plugin work with the ATEM Mini Pro?
OBS works with the Atem mini pro, but the Atem is a video/audio input source into OBS so I’m not sure if the plugin would work to control the Atem if that’s what you’re asking
Did you add the ATEM mini pro as video source or a display source?
Add the Atem as a video capture device.
would love a 30min paid convosation with you need to learn how to stream like dj akedmics, jus need guiding on how to get set up
Shoot me an email and we can set up a zoom meeting sometime.
But you can put GFX into OBS right? And utilize it that way?
Yes you can 👍🏼
Could you please tell me what settings to put in camera? It’s r6 mark ii. How it has to work in camera?
I would start by setting your camera to 1080p 30fps. You can set the SD card recording to 4k but if you are trying to use 4k out to your atem mini pro, it may not pick it up.
Do I have to use a usb c to connect the atem to obs?
Yes. To connect it to your computer. The atem has the usbc output. You could use an adapter if your computer doesn’t have a usb-c port
@@Ministry-Hacks thank you for answering my question
No problem!
Can you add countdown clock in ATEM Mini Pro ISO?
I wish! But you can by adding OBS to your setup
Hello! We’re a very small church, trying to livestream with all of the latest tech. Our main issue right now is audio coming from our Behringer x32 compact. We have no problem with audio from our computer (videos and mp3/4 files. I guess need help with getting the audio from the Behringer x32, through the ATEM mini pro, to the Facebook live stream. Currently it is silent, even though the ATEM shows volume levels. I am also having issues with getting my Stream Deck MK.2 to control my PTZ Optics camera angles. I’ve been trying to figure this mess out for about a year and I’ve reached my limit. Help!
Thanks for reaching out! I am part of a small church as well so I totally understand trying to figure everything out. It's hard to say what exactly you need. But I guess let me start by asking what audio levels are you seeing in the ATEM and what is connected that is giving it audio?
We run a long xlr to 3.5mm from our Midas MR18. From one of the AUX outputs on the Midas to the mic input on the back of the ATEM. Make sure the mic button on the ATEM itself is set to on, or you will not have any audio. The audio you currently see coming through the ATEM may be the audio from the cameras if they have microphones built in. You can mute each camera angle individually on the ATEM. Once you have that setup, you should be able to control all the audio coming through the ATEM via your sound board by making a specific audio mix for the AUX or BUS output.
We use the AUX outputs for several things. One goes to the monitor for worship, which we create a custom mix for the worship leaders. Then we have one for livestream which is also custom for livestream. And we use one other mix that goes to a speaker at our front door which we also create a custom mix for.
I hope some of this helps. Its hard to diagnose without seeing it, but it is do able. Don't give up!
I googled the Behringer x32 compact. You should be able to run a cable from one of the xlr outputs or one of the 1/4 aux outputs to your ATEM. You just have to make sure that channel is unmuted on the Behringer and unmuted on the ATEM.
Me at 9:19 *did the stream freeze?*
It didn’t freeze but we had a copy right issue with background music so we had to trim off the last minute.