Scan and 3D Print Yourself - XBOX Kinect
Vložit
- čas přidán 9. 04. 2017
- XBOX 360 Kinect from Amazon Used: amzn.to/2pgHeI8
XBOX 360 Kinect from Amazon: amzn.to/2FH3xkJ
Original Monoprice Select Mini: amzn.to/2tRxh8N
New Monoprice Select Mini V2: amzn.to/2FZD4hy
BLOG POST: davewirth.blogspot.com/2017/04...
PlayList of all my 3D Printing Video's: goo.gl/FKD0Tq
I bought an XBOX 360 Kinect camera for $10 on Craigslist and was able to scan myself in high detail, then printed the 3D model off on my 3D printer. I couldn't be happier with how it turned out. This is the best thing i have printed yet.
In this video i try to go step-by-step with how you can do the same thing. From buying the camera, downloading the drivers and software, how to scan and use the program, cleanup and print.
Make sure you download the KinectSDK Drivers. www.microsoft.com/en-us/downl...
I used Skanect to do the scanning, instead of ReconstructMe. skanect.occipital.com/
I used Sculptris to fix any holes in the scanned 3D model. pixologic.com/sculptris/
Then printed it off with my MP Select Mini 3D printer.
(Disclosure Note: Please note that the Amazon link(s) above are affiliate links, and at no additional cost to you, I will earn a commission if you decide to make a purchase after clicking through the link.) - Věda a technologie
I have an Xbox Kinect and was just starting to do the research for using it for 3d Scanning and I'm glad I came across your video! You did a great job of covering everything to go from installing drivers to getting a 3d printer ready object. Awesome job!
Now you can be yourself in Monopoly! Thanks 2017!
Thank you Dave. It's complete, helpful and pretty instructive in details. I just discovered your great channel. It's inspiring.
Awesome! I could listen to you for hours... Thank you very much and best regards from Ankara/Turkey
Thank you so much,I'm getting my 3d printer today and I'm so excited my first 3d printer and I have no idea where to start never done 3d printing before and never had interest until now,thanks again for the great video
Thanks for this, just found it and now using my old Kinect! Nice video!
Thanks! I have my first print coming up right now! Only took about 10 minutes. Nice walkthrough.
Good job. You explained very well, especially because i am French and i understood EVERTTHING. Again BRAVO
I believe the grey cable is literally just an extension cable to make the cable longer so not needed for this purpose. I have several laying around with other Xbox stuff.
Yeah its an extension only...
@@Outofthedust Tried without and doesn't work. Only works with
@@martinxp2535 it works without it
Awesome upload ive just bought a kinect from ebay gotta wait a week till it arrives but this is great info
Did not even relise you could do this with an xbox kinnect great video ...👍😉
Cool walk-through. Thanks!
I used the Skanect free version but I found that the STL export had a very visible mesh. I bought a PRO license and found that an export with 50,000 polygons in PRO results in a much better quality.
Export the object size in millimeters gives an accurate object size in mm usable to create duplicates with a fair match to the original.
very informative, Dave. You could have eliminated the need for using Scruptress to fill in the holes if you had done a more thorough job of scanning yourself, moving the scanner vertically to cover under the chin and on top of the head.
Thanks, for this. It really helped me get started.
Very cool!! it worked!! Thanks Dave!
Thanks man, that was really helpful!
watched the video and then watched again while I tried. Helped a lot. Have to get better with chair but not bad. Unfortuantely have to buy the Pro version to get higher faces than 5000
Great presentation THANK YOU very much.
Great tutorial. Very informative and thanks.
this may help you if you are using the free version of skanet you can import the file in meshlabs and fix it up it would look almost the same as he did
Awesome! Did you do this with the free versions of the software or the pro versions?
Agisoft Photoscan or Autodesk ReCap works fine. From any cam. The info with 123 Catch is way outdated.
Hi Dave,
Thank you.
Dave for smaller objects you could use an old record player, you could slow the speed down
For the benefit of those who may have read the comments below, you can download a free version of the non-commercial Skanect software.
But it only exports files under 5000 poligons, no detail at all.
i found your video very interesting, i personally make bitmaps which can be used in 3D
Great, your video is very practical
Awesome Video! I want to try this now, maybe I can finally get some use out of my Xbox One Kinect. As of now its mainly used as a door stop.
did it work?
if you're printing on a dlp printer (a liquid resin printer like the anycubic photon) you want the detail and quality to be as high as possible. its not as important with fdm fillament printing because that process is usually pretty low detail
work perfect!!!!! all graet , BIG THANKS
Nicely done- thanks!
I was just browsing the web to find out if Skanect works for my type of scanning (on a rotary table) and found this video.
This is a very nice and detailed video and worth watching all 27 minutes!
I just ordered a used Kinect 360 for 20 EUR so I will see in a few days if this works 😀
YES! It took me a bit more than 27 minutes to install all software and make my first scan but with this video this was an easy job 👍
It will take me a few scans, hours or days to find the best scan quality but this is very promising.
rumblfmp How did the scanning process work for you after all?
See my reaction below. It may take a few tries to get a good scan but this is still fairly easy to do. I also tested an Occipital Structure sensor with Skanect. That one works faster, has less errors (so less scans before a good quality scan is made) but it is also way more expensive.
For the occasional scan-for-fun use nothing beats the Kinect.
Thank you for this very helpful video. I appreciate the step by step instructions.
It's worth noting that the PRO version of Skanect that you are using costs $130, especially considering how much you stress that your scanner only costs $10.
$130 and it works really sketchy? No thanks.
Is he using the Pro version in the video or the free one?
Hello Dave, thanx for the upload. Do you know if Skanect works with the Xbox One?
Thanks for explain! Now I bought a Kinect @ Amazon and will try :)
Hello Robin,
Did you have a chance to try? Does it work good?
this is amazing - thank you!
Great vid. Thanks for the help.
Hi thanks for this Video .. And it Works fine .. I use windows 10 a Nvidia GTX 1080 and a Intel I7 ..And i use the Skanect 1.9. But first i installed ths SDK 1.8 importend !! And a hint you can plugin you Kinect Sensor without this grey cable. !!
I'm seeing more of the kinect at goodwill every day.
U go to GoodWill everyday?
@@michaelmundie1590 just about. I live within a mile of the largest Goodwill and it's here in Seattle on Dearborn. Sometimes I find a great deal or more, some days are dry runs.
So if you will do muving/rotaityng around platform:) it will benefit your scan?
Thank you! Grait video!
Very informative. Thanks for sharing!
you a black dude? have you tried this and it worked ? did you have to call NAACP to step in?
Hi, works kinect 360 with skanect on windos 10?
WOW/ Thanks so much. This is so much simpler. Way to kill the learning curve and get more people into it.
muchas gracias amigo exelente video
would the v2 kinnect for the xbox one yield better results?
I tried kinect driver 1.8 & 1.7 but still didnt work, my i7 pc is not detecting the kinect sensor.,
Great walkthrough, I appreciate it!
this is awesome for a 3d scan and print guide. very well done please do more I'm subbed. 😊 have you had any luck scanning small items with kinect? I can't scan anything small I want to scan 6inch high items.
Awsome info Dude
Hi there , my Kinect doesnt work anymore, could this be because of a Windows update?
great video mate.........
20:00 use meshmixer its mouch better and still easy and also native stl files support
Kinect just $10? I'm going to buy a 3d scanner kit with kinect. Can you suggest me what i need to buy? Suggestion will be appreciated.
Good job, man
Thank you for sharing
thank!! I learn a lot.
core 4 is slacking...
#4 You are fired!
Very good .... thank you!!!!
Cool video, subbed.
Do you think this would work with a laptop?
Hello,
May I borrow your pro Version of Skanect ?
Can you add the model number for the Kinect? Thanks
At your point I would change my cura settings to get better results.(two years later lol)
Does the second gen connect from the xbox one still work? You showed it but, wasnt clear whether that would work.
As long as you can connect it to your computer via USB it should work!
Does any one know if this works with a usb-c adapter to mac?
the grey adapter is just an extention cable.
I did download and install kinictSDL-v 1.8-setup and also KinecRuntime-v2.0_1409-Setup. My divice driver properties still read Ver 1.6.0.476 8-27-2012. I tried multiple times. I also downloaded and installed SKANECT but it does not show up in my list of programs/apps, only under Kinect SDK v1.8.0 a drop down with Kinect studio v1.8.0. No luck with my computer seeing the Xbox 360, only the audio is recognized. Found a microsoft site that said all is well with my xbox 360 and my computer. Any suggestions.
I forget, it's been a while. I just remember trying sever different drivers to finally get it to work. But i do remember Skanect always worked and turned on, i just had to download multiple drivers before the red light on the first menu turned green and the kinect was recognized.
Cool video! Question off topic, Where did you get the cabinet for your mini select?
Built it: czcams.com/video/6NJk8Kgl7oY/video.html
Is there a working alternative for Linux?
how to plug in the xbox 360 kinect?
it has got a kind of usb or displayport look and it is orange but my pc hasnt got a place where to plug it in please HELP!
You need a splitter/an adapter which is shown at 2:55
Nice video but I have a problem you may be able to help with. When I record using Skanet, the object I want is black but my backgrounds are colored (kinda of a rainbow effect). I tried using flat black or flat white back gounds but the same thing happens. Any ideas? Thanx ahead of time.
Never had that problem. One thing i did learn is about the size of the scan area. I used to do a 6x6 but it was way too big for a person. Now i only do 3'x3'. I found that it scans better and has more detail using the smaller area. But no, i've never had an issue with something not scanning.
@@DaveWirth I figured it out. I was too close to the scanner. Duh!
man, you talk so clear about installation but its getting my nerves. i already installed 50 times different sdk, runtime, etc etc and i cant make this thing work. in device manager i can see sometimes one or another part of kinect and in the end it just goes to hidden devices and not installed or installed as unknown. do you have any idea or video how to properly install this device? im sure it will be a success in yt because there is any that i can find. im using win7 pro and in another pc also win7 i was able to connect kinect only for scanning but not as webcam or it cant be recognized using kinect drivers only primesense. please share your opinion. cheers
Wow thanks
Thanks
thank you
I takeout that the doesn't work on a Mac?
good and this nice thank you
do we have a linux software for this?
The kinect is one of the most picky things I've ever plugged into windows. Update your bios, all system drivers from board manufacturer, then in Device Manager, right click on the kinect and update drivers there too. Finally got this POS to work on my dell laptop. Not working though on the MSI Z170A pc I built. Good luck.
mine was pretty much plug and play
Hi guys, nice video @Dave , quick question , Will I have a problem if use a kinect model 1414 instead an 1473?
Not sure, i just know that the early model/version works. perhaps the later kinect's work too?
Great !! , thanks man
@dave Yeah, it kind of sucks that you are using the $129 version of the software. The free non-commercial version limits the export and the results are disappointing to say the least. I wish that was obvious at the start...
exactly, im not sure why he didt mention that
hello ...I installed it to in win 10 ..using the same 1.8 version .but .is your green light in front of the Kinect always flashing ...mine is always flashing ...I heard that it was supposed to be solid green
Not sure. I just know when it connects it will show green on the Skanect program and the 3 camera's will show up.
...ok thanks ...verify if it flashes....mine does but works anyway....i will also try V2 kinect on win 10 with 3dbuilder ....or kinect fusion ....
Which is the free program?
Go Spartans. Thanks for the video.
Will this break the Kinect? Cuz I actually use my Kinect, and it is plugged in to by 360. If I do this, will I still be able to use it normally?
This can't break the kinect, you will still be able to use it normally
Eloi thx
It just wont work, probably a bad connection. The Kinect disconnects itself every 2 seconds without event touching it. I can't get it to work more than one sec in windows
I had that issue - Turned out I had it connected a USB 2.0 when it needs a USB 3.0 connection.
Same has anyone fixed this issue!!?!
Hello friend,
I saw you could use and configure kinect in your computer.
I installed the program SDK 2.0 on windows 10, but the camera kinect 2.0 (the one for xbox) is no recognized in device manager because the diagnosis program of SDK reported that
the PORT USB 3.0 didn't recognize the camera. (I added a pci card USB 3.0 with renesas chip 72020) but the camera didn't turn on the lights or the
fan. What would be the problem? Can you help me to fix it?
Thanks a lot for your advices.
Not sure.
Maybe try the usb 2.0 plug?
It's a pretty old device so might not show up with the newer USB.
Also you might need to install different drivers. I had to install like 3 or 4 before it was recognized.
@@DaveWirth I tried 2.0 but nothing happened. The drivers you refered are SDK 1.7, 1.8, 2.0?
@@videosdemo100 Ya i think so. I downloaded anything i thought would work. I'm trying to remember, but 1 driver allowed Skanect to connect. Then one allowed the camera to work ...or something?
Hi Dave, thanks for sharing your experience. I just got a xbox 360 Kinect, and my computer is windows 10 system. I tried to install the drives you mentioned in your video. But my computer still couldn't recognize my Kinect. Can you help me out?
Not sure about windows 10, i only have 7. But i will say that it took me a long time before it was working. After installing some of the drivers the Skanect program said it was working, but still didn't. Then installed other drivers and it finally recognized it. Maybe windows 10 needs something more installed???
Dave Wirth oh! I see. Thank you so much
Charles YS.Z. Have you solve it?
Hi Dave, do you have any video or test with scan of object and 1:1 scale print?
i think you can adjust the size in whatever slicer program you are using. it shouldn't matter what it's scanned as, just adjust the size on the slicer print bed and it will be the actual part size.
@@DaveWirth im just wondering if i can make replicas/copy of the 3d scan and print it exactly like the original one. for example, a plastic from my motorcycle, that is not in good shape, but scanning it and print it again in abs might be a good solution. possible?
@@xnetcascais Possibly. The scan with the Kinect isn't perfect. Especially with shiny parts. It should give your a 3D model of the right shape. But you might have to edit it a little and clean it up. Another option is Photogrammetry. See these good video's by Prusa:
czcams.com/video/ye-C-OOFsX8/video.html
czcams.com/video/1D0EhSi-vvc/video.html EDIT: The 2nd video is a more updated version. And again, photogrammetry is great for things like rocks, where there is a speckled pattern. But not good for smooth things with a constant color. So it wouldn't work on a flat table. Or wouldn't work well for a shiny car mirror. It needs different patterns to connect the images. And like the video said, outside on a cloudy day is good, with no shadows.
I've seen people try to scan something shiny, fail, then spray paint it with a speckled pattern and it worked.
2nd EDIT:
Don't scan it on a table. Put something down over it that has a pattern. Like you can see in the video that they put the part on a box with a picture, but the smooth table below was all bumpy.
should i use processing on mac? or what are the mac alternatives?
Not sure, never owned a mac. But it should work as long as it's a somewhat powerful computer that can do the processing.
Would be nice to make a real size model for parents memories and make it a business. What do you think about it?
Ya I think there are companies based on that. But they have a bunch of cameras set up and take the image instantly. The kinect is a cheaper approach, and more difficult to get a kid to sit still for 2 minutes while you scan them.
3:22 This shit into the computer ;)
Hi Dave! I just got my Kinect scanner. Any Idea where i can get the driver for windows 10?
Thank you Dave for the link. My problem has been solved. I had to uninstall Kinect SDK version 2.0 and install version 1.8 before it worked properly. Then I searched for the drivers online again and it worked.
I think I might just need some help. The drivers have been installed however when I plug in the scanner it just keeps on blinking a green light but doesn't show on the Skanect that it's been connected with my laptop. Please help me 🙏
Good for game asset creation.
not really... the mesh is to high poly, the typology is bad and unrig-able
I see model numbers 1414 and 1473 and they look the same . So which one is version 1 ?
I did a quick google search for those 2 models, and they both look like version 1. Version 2 is the more square design.
hi have you tried thw xbox one knect? if so which is better?
No i just have the old one in the video.
New one might be better quality??
Free Skanect only gives 5000 faces on STL. Way to rugged for use imo.
wonder if there a linux port..
is there any way to download skanect freely because its costly for me :(
yes
actually i have downloaded the free version but it's not working ..please share the link here so i can download from there or send me link via 14csq09@gmail.com