Honda Civic Clutch Replacement!! (Si)
Vložit
- čas přidán 13. 03. 2022
- In today's video I show you guys how to install a new clutch in your 8th Gen Honda Civic Si! (2006-2011 Models)
I know the video is long, but I felt it was worth it to give the best advise/tips I possibly could! Hope it helped you guys out!
I decided to go with the Competition Clutch stage 4 6 puck ceramic clutch & machine the factory flywheel. I plan on boosting the car to make 400-450HP, so she's gotta be able to handle the sauce.
Hope you guys enjoyed the video!
Follow my instagram for more current updates on the builds!
/ daniel_kellert
Subscribe for more Subaru & other car related content!
/ danielkellert
If you enjoyed this video, check out the Subaru build series here!
• 500HP STI Hatch (Stacy)
Link to the clutch kit used in this video
www.iraceautosports.com/produ...
Video Equipment I use
Camera
www.amazon.com/Canon-Digital-...
GoPro
www.amazon.com/GoPro-Batterie...
Mic
www.amazon.com/Rode-Lightweig...
Tripod
www.amazon.com/AmazonBasics-L...
Small Tripod
www.amazon.com/Octopus-Walway...
.
.
.
.
.
.
.
.
.
.
.
Music
Track: Indigo - Nelvian [Audio Library Release]
Music provided by Audio Library Plus
Watch: • Indigo - Nelvian | Fre...
Free Download / Stream: alplus.io/indigo
Track: Phoria - Metro Vice (ft. Dubfest) [Audio Library Release]
Music provided by Audio Library Plus
Watch: • Phoria (ft. Dubfest) -...
Free Download / Stream: alplus.io/phoria
Track: Equilibrium - Max Maikon [Audio Library Release]
Music provided by Audio Library Plus
Watch: • Equilibrium - Max Maik...
Free Download / Stream: alplus.io/equilibrium
Track: Falling - Zephyr [Audio Library Release]
Music provided by Audio Library Plus
Watch: • Falling - Zephyr | Fre...
Free Download / Stream: alplus.io/falling
Summertime by Luke Bergs / bergscloud
Creative Commons - Attribution-ShareAlike 3.0 Unported - CC BY-SA 3.0
Free Download / Stream: bit.ly/3HCVwIs
Music promoted by Audio Library • Summertime - Luke Berg...
#Honda #Civic #Clutch - Auta a dopravní prostředky
Thanks for the video dude. You have inspired me to pay someone to replace my clutch for me.
HAHA best comment so far 😂
Seriously, I was considering doing it myself. Ima either pay someone or just sell the damn car and by an automatic.
Dude pay for mine too lol
😀😃🤣 😂 😆
I thought with me being into Honda’s, I would have a “easy time” however screw that… lol 😂 this reminds me of working on a VW/Audi lol 😂 I’d rather pay someone else
Thanks for the video man. I was able to change the clutch in one and a half days in my driveway. It was honestly really fun and easy. The hardest part was lining the transmission back up to the engine. Everything else was super smooth sailing. Your video definitely helped alot!
I did the job a few months ago thanks to your video! This made me realize the scope of what I can do on my own and I’ll be pulling and rebuild my k20z3 for the first time this weekend!
Best video I have found about replacing clutch. Straight to the point yet detailed when required. Thanks mate
I completely redone my clutch from this video on my own thank you soooo much!!!!! Perfect step to step video!!!!
Hey man I cant thank you enough for making this video. I just finished replacing my clutch on my 2012 honda civic ex coupe with over 200k miles on it using this video. It took a long ass time, but we got er done!! Also replaced the slave and the CMC (which was probably the biggest pain in the ass of all).
Thank you!! Rather informative and relaxed. I did the clutch on my daughter's car. This video is the only one I really watched. Well done! It was great to see family helping you out. High 5 to a fellow canuck!
Keep these 8th gen build videos coming brother. Inspires me to fix my FA5
Such a good video. High quality and very informative. Subscribed!
Glad your in a better place mentally and physically man. Can't wait to start see some more videos from you, I can honestly say your my favorite CZcams creator. Bbbuuuuttttt that 2jz and 5.3 tho 😅
Thank you for a great guide on how to tackle this job. We were following a combination of your process and that of the Honda Service manual which we downloaded, and had the same issues in loosening the rear engine mount bolts and intermediate shaft bearing housing. In the Honda manual, they suggest dropping the subframe earlier, which in hindsight is exactly what we should have done, as those bolts and those on the heat shield are very easily accessible with the subfame out of the way - that is the way we reassembled.
To lower the subframe you have only the big six bolts and one for cable clip and another clip, so once those are out of the way (after disconnecting the lower ball joint on the lower control arms and tying up the steering rack to the top to prevent it dropping), everything else is a breeze, even the bracket supporting the right hand shaft carrier bearing.
In terms of "how much can you drop the subframe to get access to remove it's brackets and cables, we found that if you turn out the four long bolts located on each corner of the subframe and leave just enough thread in it so it still supports the subframe, you can access all. The subframe is not that heavy.
Instead of supporting the engine with a jack from below, we fabricated a hanger (Honda sells something to do this but we made our own - Engine Support Hanger, A and Reds AAR-T1256, Engine Hanger Adapter VSB02C000015) and hung the engine off that, while supporting it all on the front suspension tower mounts and front valence. It took some time to set this up, but helped a lot as we could adjust engine level up and down from the top in finite increments.
I've done a lot of work on my cars but never done a clutch. Still kind of freaked out on the amount of stuff you have to take out. But watching this video really takes a lot of the anxiety out of the equation. Very detailed. Thanks alot for this video. Really appreciate it.
Glad it helped! Tried to be as detailed as I could :)
Just a little tip for anyone that has replaced their clutch and got their civic put back together and now it won't start. Check your bolt that goes back through the one plastic wire harness. Sometimes ppl forget to put it back in. I remembered to put it back in but it was so corroded that it wasn't making proper ground connection so I wire brushed all metal contacts and then checked continuity at all places between that point and the battery. That includes the wire going from the transmission to the frame and the other one going from the frame to the battery. Apparently this is a major problem with civics that crank and don't start after doing major work and removing this bolt. One quick way to check is to hook a code reader up to it and then if it starts and runs with the code reader on then you have a bad ground.
Thanks my guy did this job over Thanksgiving weekend along with lower control arms ball joints outer tie rods rear camber arms and a full set of coilovers... All by watching this and one other video!!!
Much Appreciated..... 💪🏾😁
Let’s go! Glad I could fit almost all of the info you needed in one video 👍🏼 Sounds like a solid Thanksgiving weekend to me!
@@DanielKellert Couldn't be happier I actually broke my clutch disc as well which made me laugh🤣
Good looks on the detailed video bro, it helped me take off my first transmission. Was pretty easy. That throw out bearing was lock-in me out
Good job man! Glad it helped :)
Learned so much just watching the video! I have a 2012 civic si, she still has around 50k miles I’m hoping to push her for years to come 💙
100% earned my follow I gotta do this to my civic here soon
I followed your video step by step and my steering rack stayed up like you thought yours would. Thought that was interesting. Unfortunately the threads on my big starter bolt were absolutely obliterated. Thanks for the awesome video!
Ayy that’s what I like to hear Brett! Hopefully those threads were saveable with a tap or heli coil 😬
Thanks for this video my man, just finished my clutch job today, couldn’t of done it with you dude 🤘🤘
Ayyy that’s what I like to hear! Good job! Glad you got it done 🤙🏼
Had to come back and thank you again, 8 months later and my car drives like a dream. Awesome fucking video
Glad you got er back on the road! 👍🏼
Appreciate the effort - nicely done.
My car still drives like a dream, thanks man
Thank you! i learned a lot from your video. Fabulous bro.
New subscriber. You are so detailed and thank you
Thanks for the great detailed video! My 2012 Is will need a clutch eventually with 135,000 miles on it already - it's not slipping... yet! I don't run it very hard either!
I'm about to hopefully get a 2012 that needs a clutch I'm still not sure if I wanna attempt this myself or take it to a shop
Nice work youngster! I did the the clutch job for my stepson’s 2008 Civic Si last year. It was challenging and satisfying once I got it all put back together and worked as intended 👍 I kept the rack opinion secured instead of removing the whole assembly. I didn’t want to mess the alignment. When I was a teenager in the late 80s. I assisted my dad replacing the clutch on his 1968 Toyota Corona. It was fun and pretty easy being a rear wheel drive. This was my first time doing a front wheel drive. I knew it was going to take a while due to my work schedule. So, I lend him my old faithful 1997 Camry LE with over 300K miles on the clock. He was so impressed how smooth and semi fast it was. No comparison to his Si 😁
Best video ever helped a lot
Definitely gonna save and share this video
Appreciate that 🙌🏼
Good job Knuk!
one of the best vids 💪
🙌🏼🙌🏼
A Monday vlog! Wooo!!
More like a Monday movie 😅 this was a long one
Thanks for the video, much appreciated.
Nice video my guy
This helped me a lot on to replace my own clutch on my fa5
Leave the tie rods on the knuckle to help support the rack and leave it up, and leave the subframe side mounts they are slotted to be guides going back in, only take the loosen the slotted bolts
Great video!
Thanks! Great video
Awesome videos Brother 🙏🙌🙌
Lol passenger axle definitely doesn’t just “slide right out”
Great job on it.
great job man.
Good job I didn't took off my sub frame just lose it a little and did everything from the top
Good idea is to take a paint pen and mark that spine up near the steering wheel. Then once you pull it all apart make sure you don't turn that rod 180. That way youll line right back up
I usually do that. In this case I didn’t know the rack was going to fall out 😅 on most cars the intermediate shaft is bolted to the column & rack
Nice work
My control arm hardly moves down when I use the pry bar to separate it from the brakes. Any suggestions?
As someone else said wrap wrap wrap lol. It gets very hot back there with a sidewinder. As for the coolant lines to the throttle body I’ve had mine looped for years and never had issues even in subzero temps. Solid content bro, your going to fall in love once it’s together and running. Heads up keep torque as low as possible during tuning. These stock transmissions are made of glass and break even with na setups. Be prepared for that 😂
Think you meant to comment on the turbo civic build video 😅 but yes you are 100% right. Good to hear about the throttle body hose routing! I’m so excited to get this thing running 🔥
@@DanielKellert 😂😂 well shit I guess I did that lol my bad, you get what’s going on so probably not going to bother correcting it. Aye keep it up man 👍
Hey im doing as you are and wanted to ask do i have to unbolt steering rack 1st before i strap it and how to strap it it thanks...
I can’t get the fill plug off for the transmission. Any quick tips to make it easy?
Is there a certain way to place the clutch alignment tool? Still confused about it. Does it only go in one way?
Something to note is you’re fine with the rack and pinion coming out which isn’t a big deal, you don’t need to take out any of the bolts. It’s only bolted to the subframe. hope this saves your knuckles😂👍
Also drop the subframe before taking out the steady bearing and starter bolts and it’s super easy
So I got everything nice and tight but now the car will not start. All the lights turn on but it will not crank or anything any tips? Would I have to flash the ecu or something
good time to put after market shifter cable end bushings on,
Nice vid
Thanks for the video
It's a labor intensive job, but once it's done it's good for a while! Gotta do it soon on my 9th gen. Clutch is good, but throw out bearing is starting to make a little noise.
My friend and I are attempting to replace the clutch on my '08 without removing the subframe. It's tricky but there's just barely enough room to remove the clutch, not sure how I'm going to do the throwout bearing though. Gonna try and put the new one on tomorrow, but I just wanted to let you know that your video has been super helpful to us so far :)
Good luck! That will be tight for sure 😅 appreciate the support 🙌🏼
Update: We decided to just drop the subframe because the pilot bearing was a royal PITA. We also made the exact same mistake and dropped the steering rack 😅
@@kempt. This made me laugh way too hard 😂
@@DanielKellert i learned not to make that mistake, thanks to you lol
Yeah I dropped my sub I was thinking I probably could do it without dropping but why not make love easier but dropping it, not that big o deal. Thank you for the idea of strapping it that worked good
Hey bud, when u dropped the rack and the intermediate shaft came out too, did u hav ealignment issues? or did u mark the splines?
Just finished getting mine out today. Stock OEM clutch with 190k on it. Same exact issue, part of that spring housing busted out and I'd get locked out of gear intermittently. Chewed the absolute fuck out of my flywheel bolts to the point I didn't think there would be enough left for the socket to grab. Just waiting for my flywheel to be resurfaced and an Exedy OEM spec ones going back in! Hoping to never have to do this again
Nothin that can’t be fixed! Good luck with the install Austin 🤙🏼
Does anyone know if this would be the same routine for a 9th gen civic?
What happens if the pilot bearing is not flush like you said?
Can I get a copy of your torque specs and diagrams you used? Also do you have any for a transmission rebuild?
Should I adjust my clutch pedal like this with my stock clutch?
What happened to you with the steering rack happened to me and this just helped me get confidence to put my car together
Hey Daniel, I have a question. I have a 2015 Honda Civic LX (NOT Si), and I am the first owner with the original clutch in place. It still grabs and engages very well, but how do I know if my clutch is going or not? You said it locked on you on the HW out of nowhere? Or did you already notice symptoms prior?
I have 95K on it. Obviously a clutch can last for as long as the driver drives well (not racing the crap out of it), but want to make sure It doesn't happen to me. But also, Everything is stock. If I were to get a new clutch, could I get a beefier one without having to mod anything else?
What do you think!
By the way, you don't detail your engine bays? LOL
2015 Accord lx similar to what you just did?
Wish this came out a year ago, my car is just sitting atm now, everytime I push the clutch in it stalls out (note this only happens when it's done with cold start)
Hey dude, I recently replaced the clutch on my 2012 si and we put everything back on but after driving it for a little the vsa light started flashing on the dash and the brake pedal vibrates when being pressed. I was wondering if you know what this could be?
I did a job a while back, someone did a clutch change and had the same problem. I found that they stretched the abs cable that Is connected below the air intake housing,
I just followed this tutorial for the past two days and I genuinely think i would not have been able to do this without you bro
I gotchu 🤝🏼
ive been watching for a while now and u fr are an underated creator@@DanielKellert
Is that clutch adjustment the same with a ktuned cmc
I replaced my clutch and flyway same Honda gen as yours car, for some reason car will crank but won’t turn on. Would you know why
Out of time
Great video I just wish I had a garage
My 2005 Acura RSX is asking for a new clutch. it's beginning to slip, but the car still drives.
Is this the same for the ninth gen I have a 2012??
How long did it take you from start to finish
Did u have to remove the starter if u did how don't u have to remove the manifold
won my sub
🙌🏼🙌🏼
I’ve never done any extensive work on a car. The clutch in my si is done for. I’m tired of spending shop money to fix cars. So this might be my first attempt at doing it
Good luck 🙌🏼 you got this 👍🏼
Did you have to remove the axle nuts? I don’t think you do
I'm about to do this too. Also first time. Glad I found this video and also glad I'm not doing it in a Canadian winter, but in a Kelowna BC spring :)
Nicely done, eh!!?
Haha you got this! Good luck 👍🏼🙌🏼
How many hours did you take? Everything was in one day? Thanks for show us how to do it appreciate it!!!
Hey just did my clucth and my steering rack fell out also. How did you get it back in with the steering wheel staright?
looks like I willalso be doing that clock spring thing.
How long would you estimate it took to do this
my pedal had no pressure after doing all this i never let any fluid out of the lines
Really loved the content man thank you for sharing! Is there any way you could bundle all videos from your 8gen civic in one file so I could purchase them? I don't want to purchase a subscription from CZcams but I would be more than happy to purchase all your 8gen videos. Thanks again I really enjoyed your content!
Thanks Mark! It’s free to subscribe to my channel on CZcams! Here a link to the civic build playlist where I have been & will continue to post all of my content on the turbo 8th Gen build! It’s all free! czcams.com/play/PLM44x1RALdM_3FufaXHcXyg8ncIDr14Wi.html
Hi all bolts are out including bottom starter bolt was there a top bolt as well that need to be removed because my transmission won't separate there only a pinch of play when trying to pry and wiggle off
hey, did you ever figure this out? i’m currently having the same problem with mine.
@@sinder9739 yes the top bolt in the back also
@@sinder9739 find a long pry bar with a thin edge to at least crack it open and use a second pry bar to separate fully it was a pain bro but I got it don't give up ok
Nice job!!how the clutch is holding?planning to go with same clutch brand but stage 2 on my o5 rsxtype s.thanks
Been running it for 4 months now & she’s solid! Real test will be how she handles boost 🙃
@@DanielKellert nice 👌 thanks.
Should I put locktite on the flywheel bolts and pressure plate bolts
Some blue loctite wouldn’t hurt anybody! I usually put blue on the bolts for every flywheel I do.
Did you get chatter on the clutch during the break-in 300 mile period? If so, how much?
Did it get better after break in?
Little bit of heavy chatter for first maybe 500-1k miles, after that the chatter has been pretty minimal. Which is crazy for a 6 puck, usually they chatter like crazy. Competition must put some really good damper springs in the clutch hub.
Would you recommend replacing the detent springs and gear selector springs?
If you were ever having trouble getting the car into gear or it would pop out of gear then yes, otherwise I don’t see any reason to replace them 👍🏼
Also did you reinstall the sub frame first and then the power steering rack or did the rack have to go in first? Mine may have dropped out as well. Very awesome and informative video by the way!
Install the rack u joint to the steering column splines first, then lift them both in at the same time. The rack mounts to the subframe, just need to make sure the rack u joint is on the splines before lifting them in at the same time 👍🏼
@@DanielKellert cool man thank you!
great video. I just pulled a cracked 1.8 engine out the top keeping the manual trany in and fully intact. Just wondering if I should also change the 5 speed trany. gen.8 with 172,000 mi. JDM has one for $599.
Having an amazing father son experience. Just like yours.
Nice video boss hey just curious how many kms you got on your car before the clutch went?? I own a 9th gen si with almost 200K prolly gonna have to do mine soon too....
Did mine at 180k 😂 only cause I money shifted it racing a GTI & broke the hub on the clutch disc.
Oops ..sorry added a question where it shouldn't have gone. Just wondering if you had to go with a less expensive clutch kit what would you recommend? Also, curious how long was the process? Thank you and a great video.
There is lots of other great kits out there, just depends on what your goals are for the car. I’m going to be boosting this civic so I wanted a clutch that can handle the increased torque. If you just want an oem replacement, exedy sells a very good oem replacement kit. As for time, I’d budget yourself at least 3 days to get it done if it’s your first time.
This will be my first time doing this, an amazing video! earned my sub, but quick question, how long would it take to do this procedure since I’m on a time crunch and this is the only car I drive daily, I brought a brand new flywheel so I don’t need to get my stock resurfaced, If I start at the break of dawn?
Appreciate that 🙌🏼 If it’s your first time I’d budget about 2 days to be safe if you go hard at it. Would also recommend having someone there to help you guide the transmission & subframe in/out.
@@DanielKellert I have a friend thank god lmao, but only thing is I have one jack, sadly I don’t have the money to pay somone and have enough yet to get another jack or a pulley system to lower the transmission but I hope that should be enough, but thank you!!
Just did same clutch did it in the girls driveway didn't have to drop subframe..just move transmission back really simple..
You can do it that way too if you want to cram your hands in there haha. I just like to have a clear view of all the components & properly clean & lubricate everything while it’s all out. 👍🏼
My power steering rack dropped as well. You put that back in at the same time as the subframe? Any more info on how you did it?
Perfect video
That’s what I like to hear! Tried to be as detailed as I could :)
Do you know the torque specs for the mounting tranny to engine?
And what specifically tools did you use?
@@Automatons. I never torque bell housing bolts, just tighten them up good with a 3/8 ratchet 👍🏼
@@Automatons. I go over tools/socket sizes for each bolt as the video goes on
i find it hilarious i found this video... my name is daniel kehler and i just bought this exact same civic SI
😅😅😅
Me and my brother did this twice the first time I replaced my clutch 2 years ago qnd because pos ebay clutch sent a bad pressure plate and drove like 4 months with a sideways steering wheel lol now I'm replacing it again cause pos ebay lol oe this time tho I wish I had this video then but I'm glad I got it now lol
Good luck! 2nd times the charm 🤙🏼
@Daniel Kellert lol thanks man I'm trying to put the trans back in now wish I had one of those fancy lifts all I have is a jack lol
Thank you captain morgan