Flying INAV Missions on your Quad
Vložit
- čas přidán 20. 06. 2024
- Links:
github.com/iNavFlight/inav/wi... for the bible on this stuff
Links to the Quad Build for Beginners series: • Quadcopter Build for B...
Links to my video on Multi-Missions for INAV: • INAV 4.0 Multi-mission...
Time codes:
0:00 Intro
3:19 Quad Mission Basics
11:57 How to copy the mission onto you quad
14:31 Flying the mission
16:16 Summary and pro tips
Thank you for taking the time to watch the video. You can find me on social media at
• / painless360
• / painless360
• www.thingiverse.com/painless360
You can help support the channel by simply liking the video and subscribing to the channel. It helps a lot! In addition you can use these links to support the time I spend helping others:
• / painless360
• paypal.me/painless360.
Remember that reviews are subjective. Don't rely on one person’s opinion - watch multiple 'reviews' and make your own mind up. Unlike some, I don't do this to replace a day job as that makes the creative decisions all about 'getting paid'. I am free to be completely honest and clear in the videos I make. I’m not asking vendors to pay for these videos, so opinions are mine alone.
Please also keep in mind that the comment section is not a forum: any comments that are rude, disrespectful or use bullying or threatening language will be deleted. Pedantry isn't encouraged either. This channel is all about helping others and passing on advice and ideas, so please comment in that spirit. Comments that don't adhere to these simple rules will be deleted.
Thanks again for watching! Remember to use the playlists as I collect videos into subjects to help you learn about a topic and find related information.
Please LIKE and SUBSCRIBE and above all - Happy Flying!
#INAV #mission #howto
Still on INAV 6.1 with my 3" drone where I went as far as PH and RTH but did not dare to do missions. As I live in the mountains, getting missions rock solid is imperative! Thanks for the updated missions coverage with INAV 7.1. Looking forward to seeing what ground station does in INAV 8.
Fantastic! Thanks a bunch for the tutorial, Lee! 😃
Stay safe there with your family! 🖖😊
Perfect timing for me! I just recently built a Rekon 10 pro and put inav on it to learn how to orogram and fly missions.
Great vid, my GepRC 7" is flying on Inav now. Thanks!
Maybe an new topic on beeper setting with CLI, i had a hard time finding it out.
Disable all beeper functions: beeper -all
Enable funtion on USB: beeper on_usb
Enable funtion rx-set: beeper rx_set
dshot/ESC beeper status: get beeper
Enable dshotmotor beeper: set dshot_beeper_enabled = on
Holy smokes I didn't know about the POI waypoint type. Thanks for explaining that (and how to end it too). Super useful!
Good tutorial. Thanks Lee
Woot Woot! Love where INAV is going. So many fantastic updates since I started using it with version 1.8.
I've used Litchi for missions before. It has a feature that allows you to globally add a desired altitude over ground level for each waypoint that is essentially terrain following. No need to fiddle with each waypoint when the mission is created in Google Earth. Very cool. I've used it to do lawnmower patterns in very mountainous/cliffy areas and it performs perfectly. The Phantom 4 is in one piece, for now.
Could we create a mission in Google Earth and import it to INAV?
Good video
Thank you for the info as always! Quick question, how does POI work on fixed wings? Can you use it with a pan camera servo?
All covered in the fixed wing mission video, coming soon. Stay tuned!
Great video Lee. What happens if you loose radio contact during a mission? Does the RTH (Return To Home) setting take over or does the mission continue? Do you have to disable RTH settings to prevent a RTH on a mission that might be beyond or just out of radio range? I'm looking forward to your session about using iNav missons on wings.
You can set it to do what you want. See CLI setting failsafe_mission_delay
great video! I just have some question about the Lidar sensor does it fix the position hold and nav atlhold? tnx
LIDAR only provides accurate height detail. OPFLOW helps with things like position hold. DJI flying cameras tend to use them a lot... Happy flying!
Great tutorial for INAV 7.1 ! Would you please include details on the autoland setup and mission planning for fixed wings using 7.1 when you make your fixed wing video? I have not been able to find a good video to explain the details of 7.1 autoland. I made a few attempts with no luck on my AR Wing 900 using Speedybee wing F405.
I'm planning a seperate video on autoland. See my plans for that in the racent Rangefinder video... Happy flying
@@Painless360 Awesome! Thanks.
Hi Lee, could you please do a quick explanation of the braking and boost parameters as I would like to smooth a mission out as much as possible. Thanks
Which ones specifically?
Preparing to fly inav 7.1 missions with autoland. No fpv. Probably will loose my airplane 😂
Remember to have RTH ready!! Best of luck
Omg no fpv. Brave hahaha
Bet you'll get a bigger kick out of that experience if it works compared to doing it FPV.
Best of luck!
Maybe worth posting a video on that, I'd watch it for sure.
Best feeling waiting 40min to come back :)
@sakarrc5001 I lost video had to use rth (happened twice) man I was so nervous the whole time hahaha
Quick question... Im assuming this is possible but just want to make sure. Could a double operator setup work with this?...One person starts the waypoint process to a 2nd location say 3 miles away, then as the aircraft comes into video reception they click off the mission and manually fly the quad from that point? Asking for some friends.
Yes, you'd have to setup inav not to stop the mission if it loses connection with the first radio. Be careful with stuff like that, in lot's of places, it might not be allowed.. Happy flying!
Can you fly behind mountains or other places where you may lose los?
Technically, yes. But that isn't legal in lots of places... Happy flying
INAV is getting closer to Arducopter. Have you tried doing the mission at 60mph or even 100mph?
If you do, please let me know if it works... Happy flying
A minor pitfall confused me for a while after I moved from Vectors to iNav: iNav cared what mode I was in before I switched to waypoint mode. If I switched from manual to WP, all I got was a RTH. I needed to enter WP mode from horizon or cruise for the mission to work. I ran into this issue in 4.1, but I suspect it's still there.
github.com/iNavFlight/inav/issues/3474
Hi Lee I’m hoping you can help me I got a speedy bee f405 mini wing,I put inav 7.1 onto it every thing seemed ok but the the GPS wasn’t getting any information on configuration. I contacted some power to the servo pins and was it was still connected to computer.The board would not connect to the configuration after that have I bricked it or is there a way to recover it . Cheers Pete
Check out czcams.com/video/O-1odFRRNVY/video.html, it may help with the GPS issue.. Best of luck!
My FC has Wifi. Do you know how to upload missions through wifi?
I've never tried, if you figure it out, please let me know... Happy flying
Seems like the missions functionality is not very stable? I create a mission, save it, get it back, its not quite the same. Why do you click on "elevation" to see home? What i see in elevation is not correct... etc etc etc... Are any of the various GCS's for INAV reliable? After all, you are giving control of the copter to the program.
If you are finding things changing, then report it to the developers. I've never seen that... Best of luck