#Fiat

Here's a simplified overview of the steps involved in replacing a timing belt on a #Fiat #Panda:
Tools and Materials You'll Need:
New timing belt
Tensioner pulley
Idler pulley (if necessary)
Socket and ratchet set
Wrench set
Jack and jack stands
Engine hoist (if needed)
Timing belt cover removal tools
Torque wrench
New water pump (recommended, as it's often replaced during a timing belt service)
Procedure:
Safety First: Ensure the vehicle is parked on a level surface with the parking brake engaged. Disconnect the negative terminal of the battery to prevent any electrical accidents.
Raise the Vehicle: If necessary, lift the front of the vehicle using a jack and secure it on jack stands. Ensure it's safely elevated.
Remove the Accessory Belts: Remove any accessory belts in the way, such as the alternator or power steering belts.
Remove the Timing Belt Cover: Use the appropriate tools to remove the timing belt cover. This will provide access to the timing belt and its components.
Tensioner and Idler Removal: Loosen the tensioner and idler pulleys, and remove the old timing belt. Note the belt's routing for later reference.
Inspect Components: Inspect the tensioner, idler, and water pump. It's advisable to replace these components along with the timing belt, as they often wear out simultaneously.
Install New Components: If replacing any components, install the new tensioner, idler pulleys, and water pump.
Install the New Timing Belt: Carefully thread the new timing belt into place following the manufacturer's recommended routing pattern. Ensure it's properly aligned with the timing marks on the crankshaft and camshaft sprockets.
Tension Adjustment: Adjust the tensioner according to the manufacturer's specifications using a torque wrench.
Rotate Engine: Slowly rotate the engine by hand (using a socket on the crankshaft pulley) several times to ensure the timing belt is correctly aligned and properly tensioned.
Reassemble: Reassemble the timing belt cover, accessory belts, and any other components you removed.
Lower Vehicle: If you raised the vehicle, carefully lower it from the jack stands.
Reconnect Battery: Reconnect the negative terminal of the battery.
Start the Engine: Start the engine and check for any unusual noises or vibrations. If everything is functioning correctly, you've successfully replaced the timing belt.

[@ouladcheikhabderrazzak8001]

hi many thansks for the videos , i have a 2017 model and I want to know the recommended mileage before changing the distribution kit

[@saveriosalerno9232]

Good morning, I noticed that you mounted the belt anti-clockwise, the arrows must point clockwise!

[@MrJimmyn82]

Nice! I can see you had cam n crank locked....but this one has vvt...so can the variator (or whatever) rotate while doing the job? Thanks!

[@ltandkholbrook9555]

Thanks for sharing vid, have you an idea of labour time please :)

[@saveriosalerno9232]

Thanks!

[@alanbaryabbas885]

Thank you

[@nimblehorse]

i have the twin air 4x4...which is a timing chain

[@saveriosalerno9232]

At minute