Another hugely enjoyable video! I did the transmission, primary and top end on my T140 basically using Todd's videos and the workshop manual. You're also creating a valuable 'library' of information to keep these bikes on the road. I love it when I get notified you have a new upload, appreciate it all! Cheers, Andy
I am not building a Triumph (yet) but your thoughtful commentary contains some real gems not said in manuals. I would enjoy any of your rebuilds, modern or vintage.
So what your telling me.... laying on your side with a flashlight clenched in your teeth.... is not the best position to install transmission gear ! Side note: screw the leaf spring type Good vid
Wait! ..Kit? I had to buy each component separately after poring over drawings and finding part numbers. I should've installed cams like that. Dang! Now I'm going to have to do another engine. I've got tools now.
I have a 68 Bonny, I've found the main shat installed and tightened to the clutch basket. I think i will need to remove the c basket in order to align main shaft , shifting forks to layshaft and insert as a whole unit, then the clutch basket goes back with steel and fiber discs, correct?. To my knowledge, you can't install the lay shaft after the main has been tightened down because there is no way to align shift pawls and align into the cam plate, correct?
Do you use anything to seal the end of the shift shaft? On the 750s they're not drilled all the way through the case, but on the 650 they go the whole way through. My '66 Thunderbird leaks there, but i'm wondering if its just standard?
🔊”Quick and dirty” ?? This is one of the best gearbox assemblies “how to” ever!! Thank you so much for showing you insights and methods👊🏻
Glad you liked it!
Another hugely enjoyable video! I did the transmission, primary and top end on my T140 basically using Todd's videos and the workshop manual. You're also creating a valuable 'library' of information to keep these bikes on the road. I love it when I get notified you have a new upload, appreciate it all! Cheers, Andy
Right on!
I could watch your hands and arms working like this for hours.
haha! thanks
Oh yes, do the Enfield. Would love to see the build you would do with the modern motor !!!
I am not building a Triumph (yet) but your thoughtful commentary contains some real gems not said in manuals. I would enjoy any of your rebuilds, modern or vintage.
Great video AJ, I was a little disappointed you didn't throw a business card in the cavity :)
Next time! i need to lol
Fantastic
Very nice work ❤
Excellent! Thank you!
So what your telling me.... laying on your side with a flashlight clenched in your teeth.... is not the best position to install transmission gear !
Side note: screw the leaf spring type
Good vid
man.... real world is always 3x harder! and yes 1000% the leaf spring is evil
Wait! ..Kit? I had to buy each component separately after poring over drawings and finding part numbers. I should've installed cams like that. Dang! Now I'm going to have to do another engine. I've got tools now.
its the only way to go man
I have a 68 Bonny, I've found the main shat installed and tightened to the clutch basket. I think i will need to remove the c basket in order to align main shaft , shifting forks to layshaft and insert as a whole unit, then the clutch basket goes back with steel and fiber discs, correct?.
To my knowledge, you can't install the lay shaft after the main has been tightened down because there is no way to align shift pawls and align into the cam plate, correct?
i dont think you can. ive never attempted this but my guess is you need to pull it and start fresh
Do you use anything to seal the end of the shift shaft? On the 750s they're not drilled all the way through the case, but on the 650 they go the whole way through. My '66 Thunderbird leaks there, but i'm wondering if its just standard?
the shaft on a unit is cut for seal you could modify yours for that
what gear did you have it in when fit the outer cover, I know people do it different
the position is between 2nd and 3rd
No sealant on the case halves?
i used 1184 3 bond idk the time stamp i show it