The Ultimate Car Paint Polishes Unveiled! The Ultimate Guide To Perfect Car Paint (Part 2)
Vložit
- čas přidán 26. 07. 2024
- The Ultimate Car Paint Polishes Unveiled! The Ultimate Guide To Perfect Car Paint (Part 2). Unlock the secrets to achieving a flawless, mirror-like finish on your car's paint in my latest video! I have curated a list of the best car paint polishes that will give your vehicle the luster it deserves.
In this comprehensive guide, I’ll present the top paint polishes trusted by car enthusiasts and professionals alike. From removing light swirls and scratches to increasing the gloss and clarity of your car’s paint, I have got you covered.
▶️ SUBSCRIBE, SHARE and LIKE today’s video & Turn On Notifications for New Videos - bit.ly/PanTheOrganizer
⬇️🔶 LINKS TO PRODUCTS MENTIONED IN THIS VIDEO ⬇️⬇️
🇺🇸 For people in USA:
Rupes DA Fine Polish: bit.ly/3MJgbAb
CarPro Reflect: bit.ly/49h6rGX
Koch Chemie Micro Cut M3.02: bit.ly/479wzBD
Sonax Perfect Finish: bit.ly/49gExus
3D ACA 520: amzn.to/477h4Kq
🇨🇦 For people in Canada:
Rupes DA Fine Polish: bit.ly/3CGLM09
CarPro Reflect: bit.ly/3KArGcA
Koch Chemie Micro Cut M3.02: bit.ly/3k6m134
Sonax Perfect Finish: bit.ly/3hJkC0R
3D ACA 520: bit.ly/46MYdof
🇬🇧 For people in the UK:
Rupes DA Fine Polish: bit.ly/3X0HQQ8
CarPro Reflect: bit.ly/45PslOr
Koch Chemie Micro Cut M3.02: bit.ly/3IEOd7a
Sonax Perfect Finish: bit.ly/3XoZ2i6
3D ACA 520: bit.ly/45PsxgD
🇫🇷 For people in France: c3po.link/QCWWjkv74R
DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission on a purchase without additional cost to you. If you do purchase through my affiliate links, thank you so much for your support!
Watch more of my videos below:
✅ Best compounds: • Best Compounds For Pol...
✅ Paint polishing tutorial for beginners: • DETAILING 101 - Paint ...
✅ Machines, pads, polishing compounds, techniques: • Paint Polishing Demyst...
✅ How to clean polishing pads: • HOW TO CLEAN POLISHING...
🎶 MUSIC I USE IN MY VIDEOS - Referral link, get a free trial by clicking below!
www.epidemicsound.com/referra...
Welcome to Pan TheOrganizer, one of the biggest car detailing channels on CZcams, here to help you with fun and entertaining tutorials, tips, tricks, products and equipment reviews!
👍🏼 Click the like button if you enjoyed the video and share it with your friends and family. Don’t forget to SUBSCRIBE to my channel and activate the notifications (the bell icon) if you want to be notified every time I upload a new video. Welcome to the Pan TheOrganizer family!!
👕 My merchandise store: pantheorganizer.creator-sprin...
🎥 List of equipment I use to produce my CZcams videos: • My New 4K Camera Gear!!
📲 Follow Pan TheOrganizer:
Instagram, TikTok, Facebook & Twitter: @pantheorganizer
🌐 Visit my official website: pantheorganizer.com
🎶 Intro music by Hurley Mower
/ hurleymower
#Polishes #Polishing #PaintCorrection #detailing #cardetailing #cleaning #pantheorganizer #detailingtutorials #autodetailing - Auta a dopravní prostředky
⬇🔶 LINKS TO PRODUCTS MENTIONED IN THIS VIDEO ⬇⬇
🇺🇸 For people in USA:
Rupes DA Fine Polish: bit.ly/3MJgbAb
CarPro Reflect: bit.ly/49h6rGX
Koch Chemie Micro Cut M3.02: bit.ly/479wzBD
Sonax Perfect Finish: bit.ly/49gExus
3D ACA 520: amzn.to/477h4Kq
🇨🇦 For people in Canada:
Rupes DA Fine Polish: bit.ly/3CGLM09
CarPro Reflect: bit.ly/3KArGcA
Koch Chemie Micro Cut M3.02: bit.ly/3k6m134
Sonax Perfect Finish: bit.ly/3hJkC0R
3D ACA 520: bit.ly/46MYdof
🇬🇧 For people in the UK:
Rupes DA Fine Polish: bit.ly/3X0HQQ8
CarPro Reflect: bit.ly/45PslOr
Koch Chemie Micro Cut M3.02: bit.ly/3IEOd7a
Sonax Perfect Finish: bit.ly/3XoZ2i6
3D ACA 520: bit.ly/45PsxgD
🇫🇷 For people in France: c3po.link/QCWWjkv74R
To get DIY-good at paint correction I feel happens kinda quickly. But to get professional quality takes a lot of practice. My girlfriend made fun of me for buying a hood to practice on every week thru the winter, but it got me comfortable enough to work on my car in the summer.
I also used this hood to practice repairing rock chips, deep scratches, etc. totally worth it to me!
Back in my early days of car detail in the mid 1980's, I purchased a 1959 Impala from a "barn find" with faded clearcoat but an overall beautiful car. A friend told me about a product he started using called Liquid Glass. Well after I compounded the car with a Turtle Wax compound, I used LG (all by hand, not a machine) I brought that faded paint back to showroom condition. I used LG until late 1990's.
Thanks Pan for another excellent vid!
Glad you enjoyed it!
Another great video! enjoyed it and as always learned from it. Thank you!
Awesome, thank you! I hope you had a good Christmas Chris!
Another great video. Please keep them coming.
Thanks, will do!
Great video! I'm about to start painting corrections on my cars for the first time. These videos will be watched before I start.
I highly recommend that you watch my popular paint correction tutorial for beginners here: czcams.com/video/ustTEVGMOTI/video.html
Welcome to my channel. You discovered one of the biggest car detailing channels on CZcams as we surpassed 952,000 subscribers and we have over 127 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers.
You found the right channel to help you learn everything about detailing.
Thanks Pan. Great info as always.
Thanks Steve!
Great video Pan off your list I only have asa 520 and Adam’s polish and compound other than that 3d1 p&s playmaker Koch chemie p6 Adam’s all in one and some others I have tried on my truck and trailer 😊👍
Hi Pan, great conversation once again, I mainly use 3D One for compound and polish applications...love the long work time and great results!!!!!!
The hybrid one?
3D One will be in my upcoming one steps and hybrids video.
Its my 'go to" for most clients. Best value for money @@PanTheOrganizer
Good morning Pan! Excited to learn this morning. Happy Wed. And happy holidays!
Happy holidays lilyplum 👋👍🏼💐
I am a DIYer Since a young teen. I don't do it as an occupation but I do have as much if not more passion for my personal use. I think the way you explain is simple and exceptional your reminder of a process and basics with understandable explanation as you go. I enjoy your videos and a few others. 😎👍
Thanks Oliver! How did you discover my channel by the way? Welcome to my channel. You discovered one of the biggest car detailing channels on CZcams as we surpassed 960,000 subscribers and we have over 130 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers.
You found the right channel to help you learn everything about detailing.
Nice video Pan and we are so lucky to have so many amazing products. Every one of the products mentioned and many more will give you an amazing finish. Hopefully you guys are staying warm up there.
Cold here too
Thanks Neil! Happy holidays!
Just in time. I was lokking into this very topic today!
Glad it was helpful!
Been using meguiars ultimate polish for years with good results. Bottle is almost done so might try a new polish in the spring
Great series
Thanks Peter!
Thanks Pan!!
You bet!
Good morning pan! I've had great experiences with the sonax kotch chemi & 3D u have on display. Also sonax cut & finish is an excellent one step that finishes out beautifully. Cheers & merry Christmas!!
Thanks for sharing! Merry Christmas!
I would say for me Pan perfect finish works for me I come back to it every time my next polish that has worked for me is chemical guys VSS especially on Subaru paint!
Hi Pan, two of my favourite products carpro and koch chemie ,i hope you ,your girlfriend and both families have a wonderful Christmas and New Year
Thank you! You too!
My two favorite brands Carpro and Koch Chemie!
I'll look into those next time I order. Thx
Have a good day!
I am a major fan of Detail Kings products, an OEM company. In respect to compounds for one steps for light defects I go with Vibracut lite, 2 to 3 steps the Diamond cut series.
Great video. Have you ever tried Phoenix eod Papa cut or Fabulous? 2 of our favorite/ go to combo.
Yes but I haven’t had much experience with them yet so I wait before making my opinion. Phoenix EOD in general makes excellent products for sure.
Hi Pan, I use the Sonax for my paint correction and just change pad for more or less cut. Yvan says not to use air pressure on a foam pad. I will say in my experience I really like the Sonax but I did find as the bottle aged on my shelf when I was getting to the bottom of the bottle I did get some dusting. That was before I learned from Yvan to keep your pad not only clean as you teach but also damp. I was changing out pads instead to keep a clean pad and it was always dry. Live and learn as they say. Thank you again Pan for all that you do. I have learned so much thank to you.
So the pad should be damp? I’ve used pads dry when polishing
@_DannyG Yvan always mention damped pad will give you more cut.
Thanks Charles!
@@wichitpongarunruangchoke8507 Thank you for answering Danny's question. Yes a clean damp pad should be used on every new panel as you go. Wool pad for more cut, Typically yellow pad for medium cut and Red pad for polish light cut. Pan, Yvan, and Chelsea are my top 3 sources for the best teaching and information.
what do you use to damp the pads? does this apply to mf pads and wool pads as well?
My personal favorite is Carpro Essence. Similar cut and Finish to Reflect, but it's a good primer before a coating. Wipes off super easy. I use it with white Rupes finishing pad for jeweling, or step up to yellow polishing pad if I have minor marring. Rupes Yellow fine polish has a bit more cut. They have The Uno Pure Ultra Fine in their line, which I think is their finishing polish to pair with the white pads. Havent tried that one yet.
Thanks for sharing!
I used CarPro Fixer + CarPro Reflect combo last summer on my car before ceramic coating it. Reflect was awesome polish, long working time, low dusting and amazing gloss! Fixer got rid of the bigger defects with ease. Stellar work Pan as always❤.
Thanks for sharing!
@@PanTheOrganizer 👍🏻❤️
Happy holidays by the way Konsta!
@@PanTheOrganizer Thank you so much Pan👍🏻❤️. Happy holidays to you as well👍🏻.
@PanTheOrganizer i love this series! I have a question though.
Do you have any video's or tips what to use to protect or seal motorcycle exhaust pipes and mufflers (not just the shiney chrome ones, since there are many kinds.) I'd love to know what your expertise would point us to. It's kind of difficult i think because the engine casing and pipes get hot, but i want to pretect them and apply some sealant to make maintenance washes easier.
Thanks and keep being you!
NV finesse polish is my absolute favorite and I would LOVE to see a review from you to hear your thoughts! Car Craft Auto Detailing turned me onto it and I was blown away.
I’m a mobile detailer in Arizona and not only does it do well outside in direct sunlight, but it finishes amazingly on dark soft paints!
The Last Cut+ and NV finesse is my go-to combo for 90% of my paint corrections.
Thanks for sharing! I have tested a few NV Car Care products in the past and they were quite good (ceramic coating, spray sealant and spray wax), so I have no doubt their polishes must be pretty good too.
Thanks Pan for all the work you do, and onesty. I also love to detail cars and do it for a living 🙏👍
What location are you at?
@@kimnewling5728 im from Sweden, you?
Sweden
@strombergstromberg6040 we have automotive dealership called Stromberg here in Wisconsin U.S.A.
@@kimnewling5728 Okey Nice! Here in Sweden it's a last name, and spelled Strömberg 😊
Thanks Pan. Haven't used any of these u lined up. Being mobile i am always looking for something versatile, sun-friendly flexible and yet efficient for cut and finish. So i mostly use the onesteps, pad-dependent hybrid compound/polishes with no fillers. Excited to see the list u have under this category but some of my favorite ones: 3D-ONE, Scholl S20 Black and a couple of AiOs...
3D One is amaaaazing and will be in my upcoming one steps and hybrids video.
Thoughts on Hyper Polish? Thought it might make the list since it's somewhat unique in the market with it's spray applicator (a little less unique now with DIY Gold Standard) but generally gets good remarks from OPT fans.
Pan, thank you for this latest video. I always look forward to all your videos. I'm working with a brand new cars finish and was recommended to use Sonax 4/6 Perfect Finish with the Rupes fine yellow finishing pads for my paint correction and polish. I'll be using a Griots Garage 15mm machine polisher in the process. I'm looking for the ultimate in gloss and clarity for my car that's located in northern California that will also be garage kept and never exposed to the elements or harsh environments. Basically a garage queen taken to cars & Coffee and an occasional outdoor car show. Maybe even taken on overnight trips out to the coast once or twice a year.
Is there a super high gloss polish I can use following the Sonax Perfect Finish that might increase the gloss and clarity offered by the perfect finish?
CQFR Installer here. You've got to try OBERK's 2nd step. It's a diminishing abrasive and it is crazy.
Hi Pan. Thank you for all the videos you make, it has been helping me alot in my journey to become a professional detailer. You mentioned the scholl concepts compounds and polish. We have these products in South Africa and Scholl concepts are awesome products.
Thanks for the kind words Jack! How did you discover my channel by the way?
Welcome to my channel. You discovered one of the biggest car detailing channels on CZcams as we surpassed 955,000 subscribers and we have over 127 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers.
You found the right channel to help you learn everything about detailing.
Hi Pan I was searching for detailing products and I came across your channel and I subscribed immediately. I joined the IDA as well in this the year and in the new year I will be doing my certified detailing certification and after that I will do the next step. I enjoy detailing making a car look like new again.
That’s the spirit! Happy holidays!
Been awhile panda man I should save this one for later when I get my car not been detailing for about a year smashed up my beauty driving around in an old wreck but still keep tabs on you great to see you're still going at it have a good Christmas remember wax on wax off
Merry Christmas!
It’s good to be early!!
👍🏻
Thanks
You're welcome Ron. I hope you had a Merry Christmas!
Spoilt for choice, such good products around 👌. I like using Micro cut and it works well, last used it on a MX-5 in a dark blue and it finished the paint like glass, threw over some cancoat on and applicator block and suede rather then squirt into a microfiber. The level of beading and gloss was like it was dripping. 🎉
😁👍🏻
I really like the AMMO X foliate. Larry hit a homerun. You need to try it if you haven't already.
I haven’t
I used to polish my own cars about 20-25 years ago. I just just tried again about a month ago. The new compound and pads make it so much easier. And with a DA, I don't even get close to burning my paint.
Yup! So much safer today. And technology has advanced a lot through the decades to a point where compounds/polishes/pads are better than ever.
Since I have begun my detailing passion, I have made many mistakes in polishing. I have a 5” and 3” Rupes in my arsenal and a SPTA micro for tighter areas. (Sorry Rupes, just couldn’t justify the cost for an ibrid nano) I have learned to polish and to cut with compounds. I have even tackled some watering sanding. Definitely not for the faint of heart. My pad selection is varied, but most of polishing is simply refining. Removing some “spider” defects (most environmental) and rubs and spotting. And there are just many choices. You really do have to do some experimenting. I use Rupes, CarPro and Menzarno. My plan is to try some new ones soon. Thanks for the video Pan. Learned some stuff and also confirmed some stuff. Till the next one.
Thanks Wayne!! I hope you'll have some great holidays!
Great summary! 2024 is your year to hit 1M subs! Cheers.
Thank you! I hope you had a great Christmas!
All about the Zvizzer range of compounds and pads for me.
Just compounded and polished my 2014 Porsche Cayman for the first time. Used Chemical guys compound and polish with a DA machine. Turned out great using their spray lube with their pads.
Welcome to my channel. You discovered one of the biggest car detailing channels on CZcams as we surpassed 1 million subscribers and we have over 140 million views! I have been detailing for 27 years and I love to share my knowledge and passion with my viewers.
You found the right channel to help you learn everything about detailing.
Hi Pan,
Many thanks for putting out this video. When a ceramic protection is put on a vehicle and let's say it guards for 12 months, then only washes can be done until after the 12 months, correct?
And once the 12 months are over, would the 2nd stage of polish be appropriate-- not both, correct?
I have another question about foam and non foam pads. How much compound should be used on either? I know you said not enough compound/lubricant may damage the paint? And if you buy a brand new car, is it recommended to to all the stages of compounds plus paint protection (ceramic/graphine)? Many thanks for answering my somewhat logical questions. I know they may be too simple to answer.
Pan! Thank you for all of your continued advice and wisdom. Ivan stated air tools damage the foam cell membrane, what are your thoughts on this?
If you polish on a daily basis and always blownyour pads out, yes the forced air could potentially damage the cells in the foam.
If you only polish a car or two a year, it’s of no concern.
Awesome. I have the Perfect Finish from your previous recommendations. Going to be polishing my summer wheels which are black with tinted machine face, and of course, the black gets micro abrasions and scratches. Got the Chemical guys BallBuster wheel buffer for between spokes (dual 5 spoke design). Would you recommend the Perfect finish, or one of the other products for this purpose? Thanks.
Hi Pan , happy New Year
Question for you. When might you be posting the update the one step polishes and pads
Happy new year! The other two videos in this series should be this month. Stay tuned!
Grande trabalho gosto muito dos seus trabalhos sou de Portugal Açores abraço
Thank you! 😁👍🏻
I am using Meguiar's M - 210 as a hand polish that seems to work well, but I would be curious as to how it would compare to the others mentioned here.
Great video, thanks for the clarification. I usually just do a Polish 2 time's a year as my wife's car isn't bad at all ever. Just over time little swirl's from the contact wash over time. 👍. I have another question do you have a video on panel prep products? Thank you
Thanks! My favourite panel preps are CarPro Eraser, Gyeon Prep, DIY Detail Panel Prep and the new one from Phoenix EOD is super good too!
I've used Koch Chemie M302 on soft Honda paint, and it worked very well. Very pleased.
Question: what to do on fiberglass? Corvette in particular. Also fiberglass on newer cars front ends. Can't measure the paint with paint depth gauge. Can't afford thousands on a more expensive all measurements gauge. How can you go about appraising the paint? Don't want to remove too much clearcoat. Great video Pan.
I had to do a boat the other day that had heavy oxidation and used the Meguiars 67 that finished very well with a rotary polisher with the Purple pad WRFC7. Didnt have to do a polish after as the gloss was amazing.
Thanks for the video Pan. I was just wondering if you ever tried Poorboys, Dodo juice or Monello. And what do you think about those brands for compound and pollish.
I haven’t their polishes
hey Pan thanks for the video... I was always under the impression that essence polish was good before applying a ceramic coating but it does leave some protection ... I m wondering if reflect is a better option for a coating.
Essence is good as a primer before applying CQuartz UK 3.0 as they have chemical compatibility. Not sure I would recommend Essence before applying coatings from other brands.
So if you are applying a coating from a different brand, yes Reflect is a better polish choice. After polishing, don’t forget to wipe the paint with an IPA or paint prep spray. Then you apply the coating.
I love the channel Pan and the new videos!
One thing that would really help me is a video going over some options you have found to be good one step mild correction and polish. I don’t have time do do multiple corrections and polishes on my vehicles but would love to know some good pad and polish combos. I know you have mentioned it here and there but a designated video on specific pads with specific polishes would be awesome!
Thanks Andrew! How did you discover my channel by the way?
Here's a video I made on my favourite pad/compounds/polishes combos: czcams.com/video/2JDvQBs1viM/video.htmlsi=g72pxetg_BaIdCWM
Keep in mind you still have to test a few combinations on your specific paint to see what works best for you and your desired level of paint correction.
Welcome to my channel. You discovered one of the biggest car detailing channels on CZcams as we surpassed 965,000 subscribers and we have over 130 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers.
You found the right channel to help you learn everything about detailing.
Thanks Pan you are awesome! And truly seem like a genuine good guy! I will check the video out forsure.
I think your channel was recommended to me on CZcams a few years ago and I have been a subscriber ever since.
Thanks for the feedback! :) I hope you had a great weekend so far.
I hope you do too as well my friend!!
Salut, merci pour cette vidéo. bien expliqué et je suis d'accord avec l'efficacité de ces polish. très bons produits. Je travail aussi avec Menzerna 3800 et 3M UF 6068 ils donnent un fini à couper le souffle. qu'en penses tu?
I use two pads for compound and polish doing an entire vehicle with no issues so for me it's fine..
Pan, Guyz any videos on detailing laptops, more specially macbook screen keyboard etc
I would love to see a review of Meguiars M110 cmpd and M210 polish. I have used Meguiars Ultimate cmpd and polish and 3D One AIO, with remarkable results. Meguiars, I feel did the best job. Would love to see your thoughts and comparison to compounds and polishes you have reviewed. Love your vids, great info!!!
Can I use Reflect finish polishing paste just to remove small scratches, like swirl marks? I want to get nice mirror effect before waxing.
And can you, please, recommend polishing pads for light scratch polishing?
Thank you!
When you do your AIO video I hope you've vetted Vonixx Blend. It has replaces 3D Speed for me. Its a great way to get a decent amount of correction and a little protection at the same time. I'd put it over Rupes Uno Protect too.
I haven’t tested Vonixx polishes yet.
Rupees and Carpro work great for me
Welcome to my channel. You discovered one of the biggest car detailing channels on CZcams as we surpassed 990,000 subscribers and we have over 135 million views! I have been detailing for 27 years and I love to share my knowledge and passion with my viewers.
You found the right channel to help you learn everything about detailing.
Hello Pan. Great video as always 👍 I have a question. If I'm not mistaken I believe I saw one of your videos about a polish that fies not require to remove before adding a wax, or coating. If there is a quality fine cut polish that allows me to put the wax on top, and acts as an adheiser please let me know.
Thanks.
I'm not sure I understand your question. What do you mean by "a polish that fies not require to remove before adding a wax, or coating" ???
After polishing, you would do an IPA wipe before you apply a ceramic coating, to remove polishing oils and residue, and allow for a proper bond of the coating. Unless you use a polish primer (like CarPro Essence or Gyeon Primer) before you apply their compatible coatings on top (CarPro CQuartz UK 3.0 or Gyeon Mohs for example). But that's a completely different discussion, and we'll talk about that in the upcoming video on all-in-one polishes.
If your only goal is to apply a regular wax or paint sealant after you are done polishing, then it's not as important to do the IPA step. You could simply decide to apply the wax or paint sealant, as those only last a few months at best. They aren't designed for multi-year durability.
Great video
Are these polishes good to do a ceramic coat?
All of these would work, but after you polish, always use a panel prep spray or IPA solution to remove polishing oils, before you apply the ceramic coating.
Great video , have you ever tried Liquid Glass
Used to use it back in the day . Have a new F150 any suggestions.
Thanks
Never heard of it
@@PanTheOrganizer it’s called Liquid Glass auto polish . I’d be interested on your thoughts .
Have a great day .
Im using CarPro,Koch Chemie and Menzerna polish and compounds.So far very impressed from the Menzerna performance,but harder to clean compared to carpro or Koch.After trying so many pads brands ,now i stick to Koch Chemie,as i found them most durable,easier to clean and colour coding is just a extra .
Thanks for sharing your thoughts with us. Happy new year Atanas!
@@PanTheOrganizer Thank you for the amazing and informative content!I follow you for a year or so ,and I learned so many things thanks to you!
Happy New Year!
Ewocar polish can do a review on that? I’m in the states and I would like to try Ewocar polish but it’s not available in the US.
My favorite are Sonax PF and NV Finesse 🔥
Pan, you said you prefer the DA. I don't know if you knew but the sonax perfect finish 04/06 shown here is polish made for rotary. Ex 04/06 is made for a DA and interestingly it's a lot cheaper (atlest in my area)
Hello Pan, I had this same question. Sonax says their Ex is specifically designed to work with DA polishers and Perfect Finish is for rotary.
DIY Detail Polish is just a beast
It will be featured in my upcoming video about hybrids, as it can be used as a compound or polish depending on pad selection. So it's very versatile. :)
Of the polishes I've tried, my go to is Uno Pure. Not the Uno Protect with the added protection. I like the Uno Pure because it doesn't add anything, and has a long working time.
You use it with the Rupes white foam pad?
@@PanTheOrganizer I use it with the white foam pad on my own car, but I've used it with the yellow foam pad on my friend's car because he has more love marks.
Hello Pan
I’m struggling to find a quality brand & supplier for quick connect nozzles for my short pressure g@n.
Any suggestions would be greatly appreciated ❤
Pan - If I am attempting to remove a 3yr old ceramic coating ( CSL ) and have no major defects will a Polish such as Sonax PF featured here work ? Thank you as always.
Yes that should be enough.
Good info Pan.. How do I remove highly faded painted pinstripes? Thank you
Jeff
That's not my area of expertise unfortunately. You'd have to ask a paint/body shop expert.
Hi Pan, I have a 2024 Hyundai Tucson and wanted to apply a ceramic coating so I was wondering if you would still recommend polishing before applying ceramic coating since it's brand new and if so what brand would you recommend if I don't have a machine and plan on polishing by hand.
It's not a question or recommending to polish or not. The issue is more with the fact that most dealerships apply some cheap wax or sealant prior to delivery, and the only way to ensure 100% removal of any previous protection is by machine polishing.
And to apply a coating, it's crucial that the surface is fully prepped, decontaminated, and free of any previous protection. That's why we normally polish a new car, as yes it can have defects even brand new, but mainly to ensure 100% clean virgin clear coat.
A new car is never new until it's properly detailed.
- at the factory, the paint defects are often corrected quickly by rotary polishing which can leave marks and holograms, so polishing corrects those, before you lock that in long term with a ceramic coating for example.
- vehicles are then transported by truck, train and boat so they are exposed to the elements, industrial fallout, brake dust, rail dust, etc
- vehicles are often left at boat docks (when transported by boat) or in exterior parking lots for weeks or months, again being exposed to the elements
- at the dealership, the vehicles are almost always poorly prepped using the same dirty water that was used for all the cars on a given day, and poor washing and drying methods leading to swirls and scratches
- at the dealership, a layer of cheap wax or paint sealant is usually applied to attempt to make the paint glossy prior to delivery. It's crucial to remove any previous protection before you apply a ceramic coating, as coatings need to bond directly to a virgin clear coat.
If you only plan on applying a regular carnauba wax or paint sealant though, you could decide to skip machine polishing, as those protectants can be applied over existing protection and it's not as crucial to prep the paint as well.
I explain all of this in this popular video: czcams.com/video/QgoyrC-5CMc/video.html
So you can better visualize the new car prep process, here are the steps I perform on a brand new car for my customers:
Mercedes S 580: czcams.com/video/Vq_tfcwryVI/video.htmlsi=whord2_UEFSg28UW
Aston Martin Vantage: czcams.com/video/OKga3yZVTqo/video.html
Volvo XC60: czcams.com/video/tvDBBenhYFA/video.html
Tesla Model Y: czcams.com/video/gohks8xP5NY/video.html
Porsche 911 Carrera: czcams.com/video/2ckiivbFqs4/video.html
Mercedes AMG GT63S matte black: czcams.com/video/eU8zg1lXvXY/video.htmlsi=oGxoCp8PWt7gTncV
Audi Q7: czcams.com/video/t7HCBSVnizM/video.html
BMW M6 Gran Coupe: czcams.com/video/0lC9uyKXs8Q/video.html
BMW M340i: czcams.com/video/etXhJNaF0EE/video.html
Audi RS3: czcams.com/video/641mAJfKDLM/video.html
Golf R: czcams.com/video/jr19g4PWJsk/video.html
Nice!!!
Happy holidays Humberto!
Thank you! Cheers!
Happy New Year Pan, from SWOntario! Q-I have a ‘17 CR-V that I used a paint pen on various spots damaged by small stones from previous owner. The repairs probably not done properly-my fault! Can I correct these spots with compound & D/A polisher? Love you channel and your honest opinions of detailing! Merci!
Thanks Randy, happy new year to you as well. Polishing the touch-ups most likely won't remove that, unless you polish to a point where you'll make all the paint fail which you don't want. It's not a simple solution in your case unfortunately, and certainly not one that can be troubleshooted virtually without seeing the car.
And it's beyond detailing at this point, it's more body shop /paint shop related. Your best bet would go to see a paint shot and ask their expert opinion. My impression based on what you are describing is only a full panel respray will solve this.
@@PanTheOrganizer Thank you for the fast reply!😄 Your diagnosis does not surprise me at all. The car is in excellent shape except for my small efforts, so it will still last a long time.
All the best for this upcoming year and much-continued success!🙏
How do you feel about the Oberk products? I’ve had good results with them but I’m really interested in trying something new.
They are excellent too. I gave the Sole an award in my awards video. It will be in my upcoming one steps video.
I really like DIY Detail's gold standard polish with the 3 pad system. Have you reviewed them before? I would love to see it.
The DIY Detail will be in my upcoming hybrids and one steps video as it’s very versatile. Stay tuned.
I made a video about polishing tips with the boys from DIY Detail here: czcams.com/video/b9KDpKMmAi0/video.htmlsi=pY67WYTnsQGMx9zV
Oh nice! Can't wait. @PanTheOrganizer
Pan I am noticing a faint clouding deep from the surface of my car after waxing which is driving me nuts trying to get rid of! I've carefully and thoroughly clayed prior to applying wax but the faint cloudiness remains. I've researched that a glaze applied after claying can repair areas of clearcoat issues through which haze or cloudiness can show through. I am assuming this is my situation. I am advised to apply my wax layer on top of the glaze layer to eliminate all signs of cloudiness. Is this my best course of action? Thank you very much for your advice!
The car has a beautiful metallic/candy apple red paint job which has been well maintained.
it'll be lovely if you could test some Vonixx products!
If I get enough viewer requests for it, I'll look into it for sure Leandro. How did you discover my channel by the way?
Welcome to my channel. You discovered one of the biggest car detailing channels on CZcams as we surpassed 965,000 subscribers and we have over 130 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers.
You found the right channel to help you learn everything about detailing.
Hey Pan, I’m getting ready to do a paint correction however I have paint chips down to the metal in some spots… What would you recommend to do with them?
It depends what touch up paint kit you use. See what they recommend.
But usually you do paint correction first, then apply the touch paint. Wait the required time for the paint to cure and then apply your wax or sealant.
Hi Pam, I am a noobie and bought the 3d aca500 and aca520 to paint correct my truck. It’s a 2008 Toyota tundra. Plan on using griots g9. I’m having trouble finding the right pads to use. What do you suggest? Thank you!
You’re in luck, I will have a pad recommendations video coming soon, as a part of this series.
In the meantime, see my previous video here: czcams.com/video/2JDvQBs1viM/video.htmlsi=FgdsaF_ZiQqCDtxO
I've found the Adams blue compound and the Adams white polish works well for me
Cool. What pads do you use with them?
Lake country orange to cut and SPTA red to finish polish
I love Lake Country pads, especially their CCS Foam line and HDO.
Can you review Dr Beasley's Nano Surface Primer? No IPA needed according to Dr Beasley
I will feature it in my upcoming hybrids and all-in-one polishes. Stay tuned.
Hello Pan, do you know what type of clear coat the BMW 2024 m240 is if it’s hard or soft. Or even BMWs in general? Thank you pan!!
Only way is to do tests. But don’t overthink the moment on paint hardness. Focus on finding the right compound/polish and pad combination for your specific level of desired paint correction.
Generally speaking, German paints are harder than soft Japanese paint like Toyota.
Hi another question is the sealemt better or the paste wax ? Which is the best recommended product?
Paint sealants are different from carnauba waxes. See my popular video on the differences between the major forms of paint protection here: czcams.com/video/4ejfPHan3k4/video.htmlsi=DXm49t0igJbev9az
@14:10 you speak of gloves. What are your favorite and what mil 5 or 6 for detailing? Thanks
I don't really look at glove thickness, but the ones I usually order are 5 mil. Here: amzn.to/3TB3ewc
would you say that carpro is good to use in sun?
Want to se more angelwax products😅 used alot of Kock chemie micro cut and carpro reflect, but i got alot cleaner black finish on BMW with angelwax Redemtion with Flexipads fine pad(black one) on the piano black pices on BMW than i did the others
Would love to know your opinions/tips on polishing single stage paint. I have it on many of my classic cars.
Hi Casey. See this good video on single stage paint polishing: czcams.com/video/A8rLwOgHg2c/video.htmlsi=uSf8S4aM3LaZ2k4i
Im new at this and was wondering about the DYI Gold Standard.
It will be in my upcoming hybrids and one steps video. It’s very good and versatile.
See it in action in this video: czcams.com/video/b9KDpKMmAi0/video.htmlsi=aWP7Hc-ph_XB2I-r
@pan the organizer, what is your take on the Gyeon polishes? Thanks
I don’t have enough experience with them to comment, but from what I hear from Gyeon certified detailers, they are quite good.
Thanks!😀👋👍
The skill gap in being a high skill paint corrector is mind boggling. You watch a video of someone using a DA and say, Oh that's it? That looks easy. There is a huge gap between beginner and expert in this. There is so many variables and tricks and feel etc etc. It's absolutely not easy. The act of moving a polisher may be, but getting results and a beautiful vehicle isn't. It takes practice. Unfortunately most people don't have endless paint to learn on. I started with my own and then offered to do my wifes, family and friends. Still not an expert but there is no question trial, error and practice is needed. There is a reason a legit company is going to charge you $1000 to $3000 for a quality paint correction. You're not paying for the $80 worth of pads and polish. You're paying for the skill that 99 percent of people don't have.
Well said. It takes time and practice to become great at polishing and yes hopefully when people watch my videos and other detailing channel videos they can appreciate just how much hard work goes into detailing vehicles at a high level.
A ceramic coating job costs a lot not because of applying the coating (that’s actually the easy part), but because of all the prep that comes before that, including proper paint correction.
Yeah there’s a detailing channel that talks about actually working at a slower polishing speed.
I put their advice in action with Sonax PF and Gyeon Evo Pure = turned out wild!!!
Can you link that video
Pan whats good bro, there are a few you should try out if you want
😂 you ain't lyin'!
Hey man. Good to see you ain’t comin in hottt in my videos! 😂😂
Yeah I need to try the Scholls line. Many viewers tell me about it, especially my viewers in Europe.
@@PanTheOrganizer what you mean pan , I said it on my channel
I love you dude haha 😂 now imma be honest and it’s okay like you said to disagree be kind move on 🫱🏾🫲🏻🫶🏾✊🏿
Yeah there’s too much negativity and drama on social media with a few rotten apples out there. I hope you will stear clear of such attitudes as I like your energy and am hoping your channel will become successful.
Keep that positive vibe and we should have a chat you and I one of these days! 👍🏻
@@PanTheOrganizer sounds good bro merry Christmas 🎁 🎄
What is best polish for a white car pan thanks
What about Pinnacle advanced finishing polish? This has worked well for me on black cars.
I haven't tested those.
IPA wipe products or recepies suggestion thx
My favourite paint prep is this: bit.ly/3RRedAx
Other great paint preps are these: Gyeon Prep, DIY Detail Paint Prep, and the new Phoenix EOD Peleus Panel Prep.
If you want to make your own IPA solution, I have a simple tutorial here: czcams.com/video/OLqSdQtoND4/video.htmlsi=fdVSreIu8SxO0PqQ
By the way, all my favourite products are in my popular awards video here: czcams.com/video/KRv7vKsuliQ/video.htmlsi=29OCKXXle_PS4Tng
Hey Pan! Thank you for making this a mini series. I've been hoping for this for a few months haha.
I went by a Ford dealership yesterday man. I spoke with a gentleman that works in the body shop. He's been there for 13 years. He said of the 3 types of paint hardness, mine is in the middle. What compounds and polishes are your favorite for moderate paint, sir?
It's impossible to say, as that also depends on the level of desired paint correction. Those are questions nobody can really answer without doing panel tests. As if I say use this, and it doesn't work for you, then you'll be left wondering haha.
Paint correction is another beast of a topic. It requires time, practice, and panel tests to figure out the proper compound/polish and pad combo for your specific paint, specific level of defects and desired outcome. No two people have identical situations. I hope you can appreciate that.
But certainly, a good starting point would be trying any of the compounds and polishes and pads in this series of videos, they are all top quality, and will get the job done for sure. It's fine tuning and getting higher up in the correction level that requires the testing.
@@PanTheOrganizer I understand Pan. I'm just trying to be budget friendly with trying to find something suitable. But like you said, you'll never really know which is the best assortment until you try several. Paint correction is definitely a big variable 😅
But I will take your advice and choose one from this series. I'll stick with the same brand for pads, compound, and polish for the sake of streamlining. If I can hit 85 - 90% correction, I'll be satisfied.
😁👍🏻 Tell me which one(s) you tested and how it goes. ;)
@@PanTheOrganizer Yessir. I sure will. Merry Christmas Pan!