One Step Magic & Top All-in-One Car Paint Polishes Unveiled! The Ultimate Guide To Perfect Car Paint
Vložit
- čas přidán 1. 08. 2024
- One-Step Magic & Top All-in-One Car Paint Polishes Unveiled! The Ultimate Guide To Perfect Car Paint (Part 3). Unlock the secrets to achieving a flawless, mirror-like finish on your car's paint in my latest video! I have curated a list of the best all-in-one and 1-step car paint polishing compounds that will give your vehicle the luster it deserves.
In this comprehensive guide, I’ll present the top all-in-one & 1-step paint polishes trusted by car enthusiasts and professionals alike. From removing light swirls and scratches to increasing the gloss and clarity all while adding a light layer of protection to your car’s paint, I have got you covered.
▶️ SUBSCRIBE, SHARE and LIKE today’s video & Turn On Notifications for New Videos - bit.ly/PanTheOrganizer
⬇️🔶 LINKS TO PRODUCTS MENTIONED IN THIS VIDEO ⬇️⬇️
🇺🇸 For people in USA:
3D Speed: amzn.to/3Slqo9y
3D One: amzn.to/474DfBz
CarPro Essence: bit.ly/3saEZK3
CarPro Essence Plus: bit.ly/3FAzyqP
Rupes Uno Protect: bit.ly/46QGgVL
Rupes Uno Advanced: bit.ly/45T0n4z
Dr Beasley’s NSP45: bit.ly/3saMmBg
DIY Detail Gold Standard Polish: bit.ly/3WwLbsy
Turtle Wax Hybrid Solutions 1 & Done Compound: amzn.to/40iroNF
Oberk Sole medium polish: bit.ly/4713KY2
🇨🇦 For people in Canada:
3D Speed: bit.ly/3FzSINE
3D One: bit.ly/3tLNZWq
CarPro Essence: bit.ly/3eiKKyt
CarPro Essence Plus: bit.ly/3BjCBBe
Rupes Uno Protect: bit.ly/3tZL1O7
Rupes Uno Advanced: bit.ly/3inHMeg
Dr Beasley’s NSP45: bit.ly/477W4TH
DIY Detail Gold Standard Polish: bit.ly/3NJcuev
Turtle Wax Hybrid Solutions 1 & Done Compound: bit.ly/3U9ByNh
Oberk Sole medium polish: bit.ly/3XeBYn1
🇬🇧 For people in the UK:
3D Speed: bit.ly/3FDAmLE
3D One: bit.ly/3QcUcT3
CarPro Essence: bit.ly/3Sl1eYC
CarPro Essence Plus: bit.ly/3IC15uA
Rupes Uno Protect: bit.ly/47aB9zC
Rupes Uno Advanced: bit.ly/3vWY9Sa
DIY Detail Gold Standard Polish: bit.ly/3rSSLQU
Turtle Wax Hybrid Solutions 1 & Done Compound: bit.ly/476wO0g
🇫🇷 For people in France: c3po.link/QCWWjkv74R
DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission on a purchase without additional cost to you. If you do purchase through my affiliate links, thank you so much for your support!
Watch more of my videos below:
✅ Paint polishing tutorial for beginners: • DETAILING 101 - Paint ...
✅ Machines, pads, polishing compounds, techniques: • Paint Polishing Demyst...
✅ How to clean polishing pads: • HOW TO CLEAN POLISHING...
🎶 MUSIC I USE IN MY VIDEOS - Referral link, get a free trial by clicking below!
www.epidemicsound.com/referra...
Welcome to Pan TheOrganizer, one of the biggest car detailing channels on CZcams, here to help you with fun and entertaining tutorials, tips, tricks, products and equipment reviews!
👍🏼 Click the like button if you enjoyed the video and share it with your friends and family. Don’t forget to SUBSCRIBE to my channel and activate the notifications (the bell icon) if you want to be notified every time I upload a new video. Welcome to the Pan TheOrganizer family!!
👕 My merchandise store: pantheorganizer.creator-sprin...
🎥 List of equipment I use to produce my CZcams videos: • My New 4K Camera Gear!!
📲 Follow Pan TheOrganizer:
Instagram, TikTok, Facebook & Twitter: @pantheorganizer
🌐 Visit my official website: pantheorganizer.com
🎶 Intro music by Hurley Mower
/ hurleymower
#detailing #cardetailing #cleaning #pantheorganizer #detailingtutorials #autodetailing - Auta a dopravní prostředky
⬇🔶 LINKS TO PRODUCTS MENTIONED IN THIS VIDEO ⬇⬇
🇺🇸 For people in USA:
3D Speed: amzn.to/3Slqo9y
3D One: amzn.to/474DfBz
CarPro Essence: bit.ly/3saEZK3
CarPro Essence Plus: bit.ly/3FAzyqP
Rupes Uno Protect: bit.ly/46QGgVL
Rupes Uno Advanced: bit.ly/45T0n4z
Dr Beasley’s NSP45: bit.ly/3saMmBg
DIY Detail Gold Standard Polish: bit.ly/3WwLbsy
Turtle Wax Hybrid Solutions 1 & Done Compound: amzn.to/40iroNF
Oberk Sole medium polish: bit.ly/4713KY2
🇨🇦 For people in Canada:
3D Speed: bit.ly/3FzSINE
3D One: bit.ly/3tLNZWq
CarPro Essence: bit.ly/3eiKKyt
CarPro Essence Plus: bit.ly/3BjCBBe
Rupes Uno Protect: bit.ly/3tZL1O7
Rupes Uno Advanced: bit.ly/3inHMeg
Dr Beasley’s NSP45: bit.ly/477W4TH
DIY Detail Gold Standard Polish: bit.ly/3NJcuev
Turtle Wax Hybrid Solutions 1 & Done Compound: bit.ly/3U9ByNh
Oberk Sole medium polish: bit.ly/3XeBYn1
🇬🇧 For people in the UK:
3D Speed: bit.ly/3FDAmLE
3D One: bit.ly/3QcUcT3
CarPro Essence: bit.ly/3Sl1eYC
CarPro Essence Plus: bit.ly/3IC15uA
Rupes Uno Protect: bit.ly/47aB9zC
Rupes Uno Advanced: bit.ly/3vWY9Sa
DIY Detail Gold Standard Polish: bit.ly/3rSSLQU
Turtle Wax Hybrid Solutions 1 & Done Compound: bit.ly/476wO0g
🇫🇷 For people in France: c3po.link/QCWWjkv74R
Watch more of my videos below:
✅ Paint polishing tutorial for beginners: czcams.com/video/ustTEVGMOTI/video.html
✅ Machines, pads, polishing compounds, techniques: czcams.com/video/b9KDpKMmAi0/video.html
✅ How to clean polishing pads: czcams.com/video/IGDfRjcPaX4/video.html
Thanks for showcasing 3D Speed & 3D One! We are glad you find great joy in using them in the methods you described and sharing them with the world.
3D compounds and polishes rock! Have a good new year guys!
I have learned so much about car detailing because of this man.
Thank you! It's always a good day when my viewers tell me they learn new things and get entertained by watching my videos.
I used 3D ONE on my '95 Civic a few years ago, and was thoroughly impressed with it. Saved me a great deal of hassle and IMO the results were fantastic.
Thanks for sharing
Thank you for including DIY Detail Gold Standard Polish
You guys rock! :)
Thanks for the feature, Pan! Just a heads-up - we also have an actual ceramic AIO Nano Surface Primer that we added to our line not long after launching NSPs. It's called NSP Z1 and it uses a blend of different abrasive sizes along with a modified version of the nanogel that actually applies a ceramic coating as opposed to merely laying down the matrix of anchor points.
Is possible to use the lc4000 system w/rinseless wash with both nsp45 or z1. Or this diminish too much the product as a "primer" if use in 1step?
Thanks for the info!
@PanTheOrganizer Hi Pan, Can any of these be applied by hand rather than using a hand tool?
Simply the best presentation on any CZcams detailing channel. There is almost no editing or cutting. He is that good.
Thanks Kristian!
He’s got a girlfriend so calm down Richard Simmons
Been a big fan of 3D One for a couple of years now. It never lets me down.
Started using 3D one last summer for paint enhancements, saves time and gets great results. Great for use especially on daily driven vehicles that customers want to revive the gloss on their paint.
The Turtle Wax Precision Platelet was incredible for newer vehicle prep for ceramic coatings. I wanted to use it for everything, but learned early enough that for rougher projects I needed to step up and use the menzerna products, but for paint enhancement I loved the turtle!
Fantastic information packed video as always Pan! Thank you
you see what you did right there! it's amazing because of the way you explained it, you clarified it, and taught for people like me who was slightly confused about the use of these products. Thank you so much!!!! you rock! pan
Thanks man! I appreciate the feedback. I work hard to produce my videos, so it's nice to see those efforts don't go unnoticed. And I think detailing should be accessible to everyone, so I try and spread the knowledge to my viewers so everyone can understand and bring their detailing game to the next level. :)
I flip cars but one of my hobbies and passion is car detailing. I’ve learned a huge chunk of my knowledge from Pan and a big thank you to this man right here giving us free game. ❤❤❤
Thanks for the positive feedback, I appreciate it! How did you discover my channel by the way?
Welcome to my channel. You discovered one of the biggest car detailing channels on CZcams as we surpassed 995,000 subscribers and we have over 135 million views! I have been detailing for 27 years and I love to share my knowledge and passion with my viewers.
You found the right channel to help you learn everything about detailing.
I have used the 3D One on a couple of cars and very leased with it. In my experience on a 2014 Mazda and 2005 Tacoma, I probably could have gone with a more aggressive compound, or perhaps cleaned my pads more often. I worried before I used the product it would be too much correction, but found in my case it is pretty gentle. So I was glad to have chosen that based on Pans reviews. I have a 2016 Subaru mostly garaged that I will use the 3D One on as I am confident not to much paint correction occurs. Can’t wait for the pad vid too. Thanks Pan you’re the man.
Thanks John!
Oh yes the 3d hybrid my favourite polish and I haven't used any other nor do I need to. Very satisfied with it. Truly you don't have to finish off with a refined pad but I always love to.. Great product.
These topics and guides have been spot on lately. I’ve started to polish my own vehicles and your latest videos have been perfectly timed. 🔥
It's like I read your mind! :)
Can essence work as a primer for gtechniq cristal serum light, thanks
I would love for you to do a video on older, single-stage cars - polish and protectant options. Keep putting these great videos!
omg yes, and like how to determine what you're looking at. I mean sure, i could go read it, but I'd love to give Pan the views.
Me too
Me three
me four!
I've had a pleasant experience with Essence Plus on single stage cars. I used it on a solid black single-stage Porsche 964 and it worked great. It finishes out just like essence but with a bit more durability and protection than regular essence and much more than most waxes. Just don't forget to clean and change out your pads more frequently with single stage paint to get the most out of the products you're using (but I'm sure you know that)!
I'm a big fan of yours pan. I've watched and learned so much from your videos. Always great content and a great attitude. Look forward to your future videos.
I appreciate that!
Ive been using essence for like the past 3 years and always happy with the results. Works on both hard Mercedes paint and super soft and sticky Honda paint. Same thing wtih Uno Protect too.
Thanks for sharing!
I just finished a massive detail on my ‘21 Hyundai sonata N (fairly soft paint) with carpro essence, a scholl purple intermediate pad and a 21mm DA polisher. I was over the moon with the cut level and the great finish on soft paint. The wipe off and complete lack of dust is an absolute dream too. Because I couldn’t help myself I went back over the whole car with an 8mm DA and a very soft scholl yellow pad to jewel the surface again with essence. Looks fantastic and I will be applying NV Nova Evo over the top now that it’s primed for a coating. I also polisher the door jambs and now this is protected by essence which is great.
For some spot areas that needed some extra cut I used Scholl S20 black which gives great cut for me on soft paint with the Scholl blue pad on a 21mm DA polisher. Just left a bit of haze which essence instantly cleans up. I’ve used S20 on medium/harder paints and had great results with it as a one step cut and finish. It does dust quite a bit though, although perhaps I’m just a bit spoiled on how easy essence is to wipe up.
Enjoying this series. Can’t wait for the pad video. I’ve been enjoying experimenting with different pads and liquids so keen to hear what you have liked.
Thanks for sharing!
Awesome, I’ve been waiting for this video!
I hope you enjoyed it! :)
Absolutely, you answered my question about whether you do an IPA wipe after an All-in-1 or not.@@PanTheOrganizer
Pan, I painted a 29 Ford Model A with Tamco single stage paint. Had some dirt nibs and orange peel. So I wet sanded with Mirka autonet up to 2000 grit. Then polished with DiyDetail Gold Standard. I used their short pile wool pad and then their yellow foam pad. So far I have excellent results. They also have red foam pad they say to use with a rotary to finish it. I have not used the red pad yet. Thank you for your wonderful videos. Many of us trust your recommendations. Stay warm! It has been-5 degrees Fahrenheit here In Oklahoma! Don’t like that stuff. Tom
Thanks Tom! And yeah we're well below freezing temps here in Montreal. I hate winter with a passion! LOL
I'ved used Blackfire Compound and 3D One. I like them both a lot. BF does a really good job at correcting. I used 3D One for light polishing. LC Orange pad for BF Compound and LC White pad for the 3D One is what I've used on an older Porter DA.
I used the Turtle wax on my own personal car and I did my brothers black Civic and it did better than I thought, and I used the Rupese yellow pad, with a Grios Garage polisher. The car had a bunch of swirl marks when it was purchased and I can say only after a few passes (I didn't want to do too many on Honda's older paint) I got rid of maybe 75% of them. I just ordered the CarPro because I have been seeing great results from others and figured I would give it a try.
Great video, Pan. I really like the 3D Speed product. It removes light scratches and swirl marks with ease. It has great working time and little or no dusting. I'm currently working on a 95 Buick Riviera with a jade green metallic paint. The 3D makes the paint look like brand new. Keep up the great work.
Thanks Stephen!
I've been using 3D One for the past few years now and it is my go-to polish. Combined with the URO-Fiber pads, the end result is outstanding every time! as if my ride just got out of the showroom!
Thanks for sharing your experience!
The 3D stuff is soo good. I've been wanting to compare on my test panel against the hybrid solutions.
Yoooh Pan! Here they come!! Both 3Ds do the rounds so well 70% of the time, out in the hot sun. Plus a few others out here. Best for medium to soft Japanese paints, good for hard paint enhancement with suitable pad. Thanks big for the great video. 😊
Thanks for sharing your experience!
Huge fan of this series! Its nice to see the Manufacturers chime in as well in the comments. I own a 1995 Mitsubishi Eclipse w/228,000 miles silver in color. It has had paint work done to most of the car. Not sure how hard or soft the clear is. I followed your recommendations with the 3D ONE paired up with buff and shine microfiber pad. Just that alone was a night and day difference. I then followed it up with Carpro essence paired up with their white gloss pad. I kick myself for not coating it after. The car came out better then its ever been. The body shop saw the car 10 years later and he liked how good of a job he did and its still holding up. I then broke it to him that I put in the effort to get it that way lol. I now have 2 coatings to choose from. Glass Parency or Cerakote. Since your last video I think I'm going to wait until Cerakote gets their curing time formula figured out before I have to do the job twice. The Glass Parency I've had unopened in my house for 2 years. Do you think its still save to use?
Most coatings are good for one year if unopened and kept in stable conditions. 1-3 months at best once opened. But you can try contacting GlassParency and ask them for their specific coating.
And yes I would wait until the new version of Cerakote is released if you plan on applying that. If they get the curing right the product will be amazing as they promised.
Finally got a response back from Glass Parency on the shelf life of the coating. So here you are:
Thank you for reaching out about your unopened bottle of Graphene. Since the bottle has not been opened and if it has been kept in a cool dry place away from sunlight, you should be able to use it. If you do not see any crystallization and there is no hardened bits, I would say it is good to use. You do not want to damage the painted surface with the coating if it has already hardened. Once it is opened it can depend. I would say no longer than 6 months.
Wonderful information as always Pan. Your knowledge and ability to educate us without going over our heads is appreciated. I like Top Gloss from Distinctive Details a truly fantastic polish with no fillers and easy clean up too. Great detailing product line. Thank you
Thank you, I appreciate it!
Another awesome episode of Paaannn the Organizer good friend
Thanks buddy!
Just bought the 3-D one & am excited to try it out. I used the 3D speed last time before I ceramic coat 2 years ago. Going to go through the steps to remove that coat & apply the advanced graphing coating. But like you Pan it’s to cold & winter in New York!
New York in winter looks like a hot day at the beach for us in Montreal haha!! Gosh I hate winter.
I love these style videos! It gives me a variety of choices to use on my personal car or customers. I have recently purchased the DIY gold standard but I have used the Turtle Wax One and Done ✅ and have had great results with that polish! I’ve also tried the Car Pro Ultra Cut and was very surprised with its performance. Great job 👏 once again my friend! Look forward to what you have planned next.
Glad you like them!
I feel like I get so much helpful info here, I’m on the journey to learning about all this paint correction stuff!
Welcome to my channel. You discovered one of the biggest car detailing channels on CZcams as we surpassed 980,000 subscribers and we have over 132 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers.
You found the right channel to help you learn everything about detailing.
Thanks pan I have the 3d1 3d speed car pro essence pro 1 and done also p@s playmaker all work pretty well I usually use with a orange pad sometimes urofibre 50/50 😊
3D One has been my go to for years now, I just love the long work time, but will be trying out NSP45 real soon as I coat my 2 daughters vehicles real soon.
Fantastic video, Pan! Remember, with the NSPs the metric to look at is Cost per Service. One will find that the $$ spent to correct will be on par with, or better than the other fine products you featured because you only need about 1 ounce (30 ml) of a Nano Surface Primer for a 1-step correction. Thanks again!
Yeah it's so true. You use very little NSP on the pads!
One added tip about The Turtle Wax Pro Wax And Flex Spray. Several other detailing channels have reported that the longer you can leave the vehicle alone after using the product, the higher the gloss gets and the more durable it becomes. Times of at least 24 but even 48 to 72 hours have been mentioned. Might be good idea to do a car Friday evening and let it sit until Monday morning
Great tutorial. UNO Advance is one of my go to polish. Ammo X-Foliate is a phenomenal polish. The waffle pad is like no other.
Thank you! Welcome to my channel. You discovered one of the biggest car detailing channels on CZcams as we surpassed 965,000 subscribers and we have over 130 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers.
You found the right channel to help you learn everything about detailing.
Hi Pan, I just got DIY Detail gold standard and it works great. Yvan said to increase or decrease your cut just change the pad. Similar to how you described the Turtle Hybrid compound. Thank you again for all that you do.
Thanks Charles!
Dang Pan!! How much detailing/paint knowledge do you have crammed in that head? :) Love it! Keep it coming and thanks for the content.
More than most will ever dream of knowing.
Hehe thanks Adam! I am so passionate about this and have a huge capacity to stock information and that helps I guess to produce quality content for you all. Almost 8 years on CZcams, and I still am only at the tip of the iceberg of everything I want to share with my viewers hehe.
I used the 3D One as recommended by you, Pan, on a white WRX with a medium pad and am loving the results.. IPA wipe then a wet look topper by hand 🙌🏻
👍🏻💪🏻
3D One is the one-step I use in my business. Everytime after polishing I'm surprised by how a one-step product can be so effective in removing scratches and leave a very nice finish. In combination with a medium foam pad or a mircofiber pad, depending on the type of paint, it's always a succes.
Hi, are you using something else after the 3D One ? like a finishing polish ?
Usually with an all in one polish I go for a one step correction, otherwise there is no point in using an all in one product.
I have used a few of the products in this video and find them to work very well. For me Uno Protect worked great for my vehicle. I also tried one that you did not review, that being P&S Play Maker - All in One. At $42 USD for 32 oz. it worked VERY well and is very inexpensive. This product is infused with Bead Maker and the shine was second to none!
Thanks for sharing Scott.
Love 1 and done
Yeah it's pretty good. What pad do you usually use with it?
Welcome to my channel. You discovered one of the biggest car detailing channels on CZcams as we surpassed 1 million subscribers and we have over 140 million views! I have been detailing for 27 years and I love to share my knowledge and passion with my viewers.
You found the right channel to help you learn everything about detailing.
Thanks!
Thanks for helping to support the channel!
Hell yes Pan
;)
Great Video. I am an enthusiast and I have tried 3 of these: 3D One, DIY Detail Gold Standard, Turtle Wax One & Done. I am certainly not a pro but liked all three with DIY Detail being my favourite. Cheers
Thanks for sharing!
Nice job as always Pan! Another one you should look at is Ammo NYC’s new polishing system. X-foliate is another all-in-one / one step polish.
Thanks!
3D ONE again....
It's been a godsend.
Great cut, great finish.
I do agree that on super soft clear coats, there may be a challenge finishing mar free. I haven't had one in years though. If that car shows up, I finish with 3D AAT502.
Optimum Hyper Polish or the Hyper Compoud V5 can also do one steps! The V5 is years advanced compared to HC V4.
Please try/review One Step Auto Finesse!!!! Love your channel, thanks so much for all your detailing help for us all!! :)
Thanks Enukabal! Welcome to my channel. You discovered one of the biggest car detailing channels on CZcams as we surpassed 965,000 subscribers and we have over 130 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers.
You found the right channel to help you learn everything about detailing.
Awesome video Pan and you tell us so much accurate information in a clear manner. I have used a lot of these and they are all first class products. The product I use the most is DIY Gold Standard as it cuts hard and finishes soft. I am the odd ball who cuts with the beast and finishes with a rotary. Does anyone have side by side co parison tests of the Dr. Beasley’s?
Thanks Neil!
Used Oberk sole on my car and was really impressed with the results
Thanks for sharing!
Thank you so much for doing these very informative videos! I have learned a lot from you! I am going to check out the Dr. Beasley NSP when I do my truck this spring. I have some scratches to fix then I want to do the paint correction, then apply a ceramic coating! It is going to need a lot of work but it will look awesome when I am finished!
Thanks Jim!
You are very welcome!@@PanTheOrganizer
3D One has worked well for me many times hut as a one step I would rank Griots Correcting Compound right up there.
Me too
I’ve never had much luck or success with griots. They’ve disappointed me time and time again but their leather cleaner is okay.
@@sonofagun5305 same here. I once tried their best in show spray wax and it didn't do anything for me. It didn't provide much protection and it didn't wow me at all as regular car waxes from an auto parts store or Walmart would be better than the Griot's diarrhea in the bottle spray wax. I sure hope they changed their formula from the time I tried it in 2011
use 3D One 500/400 and Carpro Cut / Polish line. Depends on what I'm doing on said car (I.E> Full Coating or just a basic less than 12-18 month spray coating). Both lines have always done amazing for me Soft/Mild/Hard clears.
I agree with all in 1 for daily drivers. Then maybe throw a quick coat of wax or sealant on top (Depending on what all in 1 you use.) But I used to use Wizards products when I did it professionally. (I used to work at a few different dealerships,and cleaning things with more freshly painted surfaces was a common thing. Wizards products were created by a former body shop guy and they are body shop safe.) But I would often use their Wizards Shine Master and their Wizards Nano Wax like a all in 1 on my Mustang every spring after a Michigan winter. I was very happy with the finish and the longevity of the product. If you haven't tried them I would love to see a review. Thanks Pan for all the Info.
Thanks for sharing!
Nailed it with a fantastic informative video!! 👊 I still reach for 3D one on a regular basis. As far as suggestions maybe we could do a video on the 3D body shop line in the green bottles? Cheers pan! 🇨🇦
Thanks!
I use 3D speed and 3D one. I am going to try MR Beasley 45 and DYI gold.
The DYI it didn't carry any cutting properties did it . Great video looking for a good single step minor cutting with exceptional shine. Thanks for your wonderful video.
I don't understand your question. The DIY Detail Gold Standard polish can be used as a compound if paired with a cutting pad, or as a polish if paires with a polishing pad. Its beauty lies in its versatility.
Pan, gr8 vid as usual. Sooooo many terrific products here! I've settled in primarily with the TW One & Done Compound. It's not only the versatility with different pads but I continue to be amazed [as my customers] with the gloss and finish! And that INCLUDES how well it always looks AFTER the IPA wipe-down. Shine on you crazy diamond!
Thanks Audie!! Have a great weekend!
All great choices
What's your favourite compound, and favourite polish, and favourite all-in-one?
@@PanTheOrganizer 4 hot paint in full sun csi ceram x ,tw 1 and done,fabulous finish polish.
Un autre banger Panner....we've been using the lake country Blue hdo pads with hyper polish on soft Toyota paint, and it's been amazing..
Lots of transport scratches from drivers getting in out of dirty vehicles lately, so this combo works wonder..
Yes, we dealership detailers care about customer vehicles.
Tlc "jayce price"...is another compound we've been playing with, and it's pretty good so far.
Thanks for sharing Dan!! Stay safe in this disgustingly cold weather! :)
Very easy to understand the video as a beginner and well explained. Could you make a video about scholl concepts s20 black 1 step compound ?
Thanks for the positive feedback. How did you discover my channel by the way?
Welcome to my channel. You discovered one of the biggest car detailing channels on CZcams as we surpassed 965,000 subscribers and we have over 130 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers.
You found the right channel to help you learn everything about detailing.
I have heard really good things about Griots All in One Wax
This was extremely useful for a DIY amateur like myself. Thanks
Glad it was helpful! How did you discover my channel by the way?
Welcome to my channel. You discovered one of the biggest car detailing channels on CZcams as we surpassed 1 million subscribers and we have over 135 million views! I have been detailing for 27 years and I love to share my knowledge and passion with my viewers.
You found the right channel to help you learn everything about detailing.
@@PanTheOrganizer I’ve been following your channel for 4 years when I first bought my 2020 Avalon. Appreciated all the reviews and tips. For my daughter’s project I bought a Saker cordless DA buffer. One last question, can you use a ceramic detailer on a non-ceramic polish? Thanks again.🙏🏼
Need to try csi ceram-x car polish
can you please test and show us your work with Koch Chemie one step polish P6.02!
Love all your videos! I have another white 2024 Honda under 8K miles. Would you please give me a quick recommendation of polish and pad combo (using a Griots G9 DA) to prepare and enhance for a ceramic coating. I know you recommend testing but I can’t afford to buy multiple products to just test.
Thanks, you’re the Man!
Hi Russ. Keep in mind there is no miraculous "one product and pad" that does perfectly well on all points, hence why we do panel tests. But a good starting point would be Rupes yellow polish with Rupes yellow foam pad, or DIY Gold Standard Polish with their waffle pad. Here are some links:
DIY Detail Gold Standard Polish: bit.ly/3XjRdeB
DIY Detail Gold Standard Yellow Waffle Polishing Pad: bit.ly/3qW7334
Hi Pam, my wife has a brand new white Escalade and I want to polish it. I’ve been out of the polishing game for a long time. Can you recommend what size polisher, and what pad and also a polish to just give it its first polish. The car has never been waxed, and there’s no ceramic coat. Thanks for all the content!!!
I would like to try a one step especially on my wife’s car, it’s a daily driver and I usually only have one day to detail it, thanks Pan 👍😁
Thanks Dave!
I like angelwax regenerate and sonax ex 04-06
I used 3D One on my Challenger last year that the dealership kept running through automated washes before I bought it and the car looked like one giant spider web. It was my first time doing paint correction and 3D ONE was really easy to use with the orange Lake Country pads. Finished with the white pads and Sonax finishing polish and the paint had no more scratches. I am about to do the same on my new silverado and wifes bmw i4 and ceramic coat with gyeon of gtechniq soon
I usually stick to just one steps with orange LC pads. I'm curious as to how much difference you actually saw by doing a second step with the white pad (vs just the one step with 3D)? Did it really make a noticeable improvement?
@@KingRockets to be honest not much of a difference. Current cars I am just going to go with one step and coat. The second step added some gloss but the paint for a new car was terrible. Both my current cars I was very specific that the dealer not wash them since they just use automated washers
Hey pan thanks for the cool videos as always. I have a request could u make a video how to apply a ceramic coating but not on the hood more like the difficult areas like front bumper (the ones with aero parts not an easy one like a tesla)? Every video how to apply a ceramic coating is on the hood or on easy areas. I would like to know if there are any tips and tricks on more tight, small, difficult areas.
There are no real magic tricks. It's just take your time to ensure proper coverage. And you can try different applicators. Instead of the traditional rectangular applicator block and microsuede, you can use smaller microfiber applicators which contour shapes better, like these:
amzn.to/3vKhKIo
amzn.to/425EGOa
Hi Pan, I was wondering if you could include some information about other popular brands product on the topic that might not perform on the same level
I am brand loyal to Adam's and I personally like to keep all my products to 1 or 2 brands. I learned from your videos that Adam's and Stoner's iron remover was not up to par against CarPro's IronX
I couldnt have really had a personal preference because I would have never bought IronX if it isnt for your videos, because I would have simply thought the lack of reaction from the iron remover was because I didnt have any iron contamination.
When the product I currently use (in this case, adam polishes's polish) is not listed as your recommended polish, I question if I should replace it with CarPro Essence or is it good enough
30:35 Pan, love your channel, watched some of your videos on my family account but subscribing on mine.
I have a 2012 Yukon with the pearl diamond tri coat, owned for almost 3 years now. Previous owner maintained the vehicle very well, the clear coat has a shine like it was just waxed after my 2 1/2 years of washing. I use a microfiber mitt with Chemical Guys Citrus wash. The clear has practically no orange peel, may have already been flattened but hard to say.
I just bought a detail pressure washer with cannon, i'm curious to find out if it may have a coating and the best way to maintain the OE finish, also what coating is recommended for the first time user?
I don't believe the clear would be any different than other GM models of that vintage but there's no scratches and I want to continue how the finish looks.
I've used Meguiers ultra cut, fine cut on other vehicles for polishing, Klasse AIO, Natty's blue or #26 yellow for wax....but haven't used anything but soap and a mitt on this Yukon...would like to get a new arsenal of products.
I know it's impossible to answer without seeing it, but looking for any tips on products moving forward.
Sorry to get long winded...keep up the excellent content. 0:00
Congratulations for your work. Have you tested the Sonax Cut + Finish 5/5?
I haven't
Koch chemie orange is a great product
Gold standard polish, nsp, 3d one, and sole are so good I'll need to try out that turtle wax, I'm out here wondering if you have ever tried Shine Supply Compounds they got a new one called class cut plus up there in terms of a polish
Thanks Eddie
I tried pretty much their entire lineup but not their compounds or polishes yet. Here's the brand review I did of Shine Supply products: czcams.com/video/Kn3LH4RFyoQ/video.htmlsi=d28-0lR7Se8eOyt2
I use 3d speed on alot of cars and swap out pad to work on paint
If you do an update to this video, I’d like to see Menzerna Cut Force Pro included. It’s a newer one-step that seems to be getting great results but doesn’t seem to be getting much attention.
Been using essence and gold standard polish for a while now.
Gold is often first polish i grah for one step jobs.
Welcome to my channel. You discovered one of the biggest car detailing channels on CZcams as we surpassed 980,000 subscribers and we have over 132 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers.
You found the right channel to help you learn everything about detailing.
Pan...Great and informative video. 2 questions..... 1-how can we tell or where would we find the on-line info on soft, medium or hard paint for all car models? 2-on the above video, what would be your top 3 picks?
There is no such thing to my knowledge, as car manufacturers sometimes change paint suppliers in the same production year, for a same model (supply chain issues, issues with the paint itself, change of contracts, etc). The only way to know soft, medium or hard paint is to do panel tests to find the appropriate compound, polish and pad combo for your specific paint and level of desired paint correction. But don't overthink that part of it.
All my top product recommendations are in my annual car detailing products awards. ;)
Pan, do you have a video on how to correct around decals or stickers from the factory?
No unfortunately.
If I have a to the metal scratch (came with the vehicle I purchased) is it okay to polish over it or should I just avoid it with the polisher?
What would be best? Meguiars 3in1, TW ceramic+graphene paste wax?
Hey Pan! Love the video. Just a quick question... If I use a All-in-One do I NOT need to use a compound? Or can I use a compound and then an All-in-One and it not be overkill?
A traditional 2-step paint correction starts with a compound, and finishes with a polish. Both of those contain no protection. You add your protection after those 2 steps.
Then you have a separate category. All-in-one. Those are typically a polish infused with some light protection that can last 1 month to a few months at best. It's meant to quickly polish and protect in one step. After using an all-in-one, you apply either a wax or a paint sealant. You would not apply a ceramic coating, as coatings need to bond to a virgin clear coat, so an all-in-one is not a good choice before applying a coating.
All-in-ones won't achieve the same level of paint correction as a true 2-step process, for obvious reasons. The more time you spend perfecting the paint, the better the results.
AIOs (all-in-ones) are meant for a quick and simple way to improve the appearance of paint, remove light swirls and scratches, and add a bit of protection too.
Hey Pan do you ever dabble in rock chip repairs at all, or is that a niche you stay away from?
Searched through your library as best I could and didn’t find anything.
3d one. Im getting used to it with different pad applications. It's stellar so far.
The funny thing with all-in-ones is that you need to wait for some of them to cure. I've used Extreme solutions 404 and 403 and should wait 24 hours for the stuff to cure. Ummmm....not a tremendous fan of waiting that long. Ok. Thank you, Pan, for the great video.
That is the Achilles heel of both lvr 403 and 404. Gloss is insane, wipe off super easy but if you want to put on ceramic coating or additional protection waiting 24 to 48 hours isn't realistic for most people especially if you don't have a garage.
Thanks Kim!
@@josephonofrio7243 I know right?!
Great selection of products and explanation Pan. For rupes uno advanced I get the same result 4-6 months on the paint it's not the most durable. Great gloss though. I prefer the GS over 3D one now 1 spray is much easier. Maybe DR Beasley can make a sprayable NSP45 and 95? Since you literally need 2 pea size for the "primeing" after that it's just one tiny pea on the pad. When a spray imo will distribute it better and follows DR Beasley less is more for their NSPs. What do you think Pan?
Thank you Socrates.
Thanks Soc! It would be interesting to have @DrBealeys take on that!
@@PanTheOrganizer that’ll be awesome
I remember you using and really liking SONAX perfect finish. What do you think of that one?
I love it. I mentioned it in my favourite polishes video here: czcams.com/video/eiXSm0YBpXE/video.htmlsi=YBp0SWsMy_F-lL4o
I have a question: I am a great admirer of your work and your explanations, which sealant do you recommend for the best protection? Uno Protect or Essence or Menzerna? I don't intend to use a coating, just the sealant. Thanks in advance
Rupes Uno Advanced or Uno Protect and CarPro Essence are not meant for super durable long lasting protection. You'll get a few months at best in normal conditions.
If you want something that will last 1-2 years, you can use the CarPro Essence, and apply CarPro CQuartz UK 3.0 ceramic coating on top (2 layers, 45-60 min between layers).
Merci Pan!
Tu explique bien les utilités de Essence et Essence+ au niveau cquartz mais j’aimerais savoir ton avis sur le procédé essence twin? Pour ma part je l’ai adoré mais je crois que pour les bienfaits de ta chaîne ce serait pertinent d’en faire part.
Merci 🙂
Essence Twin? Je n'ai jamais entendu parler de ça.
@@PanTheOrganizer c’est un polissage avec Essence suivi d’essence Plus pour offrir une protection de 12mois 🙂
Would love to know the best way to take chaulky gelcoat to shined finish "easily" .. there's nothing out there on this using newer product
Great video, Pan! As far as all-in-ones, I've had great results with Griot's Garage Ceramic All-In-One. Pretty good cut and decent protection for an AIO.
Same. I use this on my friends' cars for a quick sprucing up whenever I get them to come by for a detail. Have you tried this one @PanTheOrganizer?
I haven't tried that one yet.
What should I do with a fourty year old car that needs 12:09 paint correction ?... btw it's red 🙄, great vid !, I'm learning as I go !!!!!
Bonjour Pan, Y-a-t-il un lien pour suivre vos vidéos en Français ? Merci pour ce que vous faites 👏👍
Je ne peux pas produire une version française pour chaque vidéo. Lorsque la version française est disponible, elle l'est en même temps que la version anglaise. Ceci étant dit, j'avais fait une version française de ce type de vidéo il y a quelques années ici: czcams.com/video/IbvdWhrS11A/video.htmlsi=Tb27UFH0pSCKgJqw
Hope you’re staying warm in Canada. Extremely cold here in Chicago. I recently tried DIY Detail Gold Standard with great results. I’m a P&S lover. Like the Play Maker All In One. I’m curious your thoughts. Enjoy your evening!
Thank you for trying DIY Detail Gold Standard Polish
Yeah it's beyond freezing here at 5F (-15C). But not as bad as my friend Rick in Calgary, they had temps of -22F already (-30C).
I haven't used the Play Maker yet.
How about a collaboration between you and Brian from Apex on single stage paint correction tutorial. That would be awesome.🤔
Heyy pan can I use hand application method for turtle wax one & done compound?
Yes. But keep in mind you will never achieve the same level of results as with machine polishing for obvious reasons.
It takes a lot of time and an insane amount of wasted energy to hand polish, and the results are average at best, regardless of which polish you decide to apply by hand.