UniFi UXG Pro Setup and Adoption | Fully Explained

In this video you will see the setup and Adoption process of UniFi UXG pro also how you can adopt through SSH.
1. Physical Setup: Connect the UXG Pro to your network, power it on, and make sure it has internet access. Use the provided cables and connect it to your modem or router.
2. UniFi Controller Software: If you don't already have it, download and install the UniFi Controller software on a computer. This software is used to manage Ubiquiti network devices, including the UXG Pro.
3. Discover Device: Launch the UniFi Controller software, and it should automatically discover the UXG Pro on your network. If it doesn't, you can manually adopt it by clicking "Devices" and then "Adopt" in the Controller interface.
4. Adoption: Follow the on-screen instructions to adopt the UXG Pro into your network. You may need to create or log in with a Ubiquiti account. During this process, you'll set the device's name and configuration settings.
5. Firmware Update: It's a good practice to check for and install firmware updates to ensure your UXG Pro is running the latest, most secure software.
6. Network Configuration: Configure the UXG Pro according to your network requirements. This includes setting up firewall rules, VPNs, and any other specific configurations your network needs.
7. Testing: After configuration, thoroughly test the device to ensure it's functioning as expected and providing the desired network security features.
8. Documentation: Keep records of the device's settings, login credentials, and any special configurations for future reference.
How to Instructions guide : support.hostifi.com/en/articl...
Please note that specific details may vary based on firmware updates and the version of the UniFi Controller software you are using. Always refer to the manufacturer's documentation for the most up-to-date instructions.
#unifi #ubiquitinetworks #ubiquiti #setup

[@user-df5qv6ql9j]

I have an existing Unifi network running a USG -3. How do I go about upgrading to the UXG? Will it keep my existing networks and settings?

[@techtalkandtechunboxed]

Yes it will keep the existing network settings. To upgrade from USG 3P to UXG pro you need to be on-site unplug the wan cable and lan cable from USG 3P forget it from the site and connect the WAN and LAN connection on UXG pro and then follow the above setup guide after that UXG will retain all the configs. Let me know if you still get an issues.

[@techtalkandtechunboxed]

Please check out my new video on migration from USG pro4 to UXG pro

[@AsifShaikh-hn1yp]

Can we have 2 UXG Pro running active backup or HA

[@techtalkandtechunboxed]

Unfortunately no HA is only available on UDM pro and UDM SE

[@saketdhandhania7947]

can we connect

[@techtalkandtechunboxed]

Yes Sure you can email me at [e-mail]