Read out the battery voltage and other values on your ETHOS transmitter
Vložit
- čas přidán 22. 07. 2024
- 🔗 www.MrD-RC.com 🔗 / mrd_rc
In this video we look at how to have your ETHOS transmitter read out values, for example the battery voltage. This can pretty much be any value on ETHOS, including all the telemetry sensors you have discovered. In the video, we take the battery voltage as an example. Showing how it can be read out from operating a switch. Or automatically read out when the value exceeds a specified target.
✈️ Contents ✈️
00:00 Introduction
00:31 Getting the telemetry sensors
02:37 Creating a special function to simply read out a value
04:01 Having the value automatically read out when a threshold is passed
07:25 Fixing the mistake in the BATT LOW logic switch
08:25 Having the value read out at a set interval
09:47 Conclusion
Thank you for watching this video. Time is precious, so I hope that you got some benefit from this video. If you have any questions, please leave a comment and I'll do my best to answer. Please try to keep questions relevant to the video in, as they may also help others who have the same question.
✈️ In this video ✈️
⚙️ FrSKY TANDEM X20 Pro transmitter: bit.ly/MrD_FrSKYX20Pro
✈️ Help other RC pilots find this video ✈️
If you found the video useful, I'd appreciate a thumbs up. This will help CZcams share this video with other RC pilots who may find it helpful. If you would like to get more videos when they become available, please subscribe and click the notifications bell icon. If there are links above, they may be affiliate links. If you click them, it will help me and my channel at no additional cost to you.
✈️ Supporting me and other resources ✈️
🛩 There are more tutorials on my web site at www.MrD-RC.com.
🛩 You can also join like-minded people at the Fixed Wing RC Rebels group and INAV Fixed Wing Group on Facebook.
🛩 Join the channel's discord server at / discord
🛩 Liking the video, subscribing, and clicking the bell icon can help greatly. This shows CZcams that the video is helpful, so it will be shown to more people, who may have the problem dealt with here.
🛩 If you found my video useful, you can become a Patreon at / mrd_rc
🛩 If you prefer, you could always buy me a Coffee at www.mrd-rc.com/go/ko-fi/
🛩 I also have merch at mrd-rc.creator-spring.com/ This include branded items as well as general fixed wing RC apparel.
Thank you for your time, and don't forget to fly it like you stole it!
#FrSKY #ETHOS #LogicSwitch - Jak na to + styl
great work. Very good video. Thank you.
A great asset to hobby 💪💪👊👊 keep up the great work 👍
Thank you 👍🏻
thank you
You're welcome Steve 👍🏻
How would you do multiple call outs on a switch. Example, RSSI, Volts, Temp, and amps.
Just list them one after the other. The special functions will activate in order.
Followed the video and started over couple of times and still couldn't get it to work. When I changed the active condition from switch to logical switch BATT SWITCH as shown at 6:50 in the video and toggled the switch but got no read out audio at all. What am I missing?
The BATT SWITCH is a very simple logic switch. So there’s not a lot that could be wrong. It should trigger if either of the two lines in it are true. If only the switch is not working. Make sure that when you select the switch, you are holding it, then click the return button while still holding the switch in the correct position. If you’re using the same switch as in the video, it should show SG with a down arrow. When you move the switch. You should see that line go bold in the logic switch. And the name of the logic switch should go green.
Thanks, how can we readout "Cell Lowest" like in Edge TX with a FrSky FLVS volt sensor? I've tried with no success.
I love your micro test balsa plane that you use on your test bench. Did you make that yourself? If so, did you make a video on the build?
I don't have play value option in my x14 is this only tandem feature?
which brand/size etc of micro sd card do you reccommend for the TX20s...i get a lot of "emergency mode" situations....which i have read are caused by the sd card..thanks
I’m using the Samsung Pro Endurance MicroSD cards. They are made for being accessed often, and have performed faultlessly.
thanks@@MrD
Hi Darren. My transmitter which is the X 20 S does not offer me the play value command. I think I may have deleted it somehow because it did in the beginning. It also does not give me the welcome to Ethos command on start up. Anything that has to rely on reading a value does not work. Is there anyhow I can reset to the original settings or download the software to the original settings? Thank you very much. Stephen
Hello, how to showing the battery voltage on the home screen?
Great video. About to buy a X20S and will certainly go, in details, through all your videos.
Question on the telemetry topic : with the TD SR12, are telemetry for battery and altitude / altitude vario included into the receiver?
Thanks!!!
Hi Eric. Looking at the web site, it should. There is an onboard barometer. So you should get altitude, vertical speed, and the voltage of the battery.
Hi Daren.
Thank you for another great video, you help me a lot to understand Ethos.
I have a question, I will use a TD12 with 2 2S LiPo batteries connected.
It’s possible to setup an independent alarm for each battery?
The TD R12 will take up to 10v input voltage. So 2S is fine. But it will output that voltage to the servos. So if they are not HV servos, you would need to use a BEC before putting the power in to the receiver.
I can’t see a list of telemetry sensors for the TD R12. It may be that each battery’s voltage is returned via the telemetry sensors. In which case, each battery can be monitored.
Great video. Any chance you could do a video on x20 HDZero and a hdzero freestyle v2. I have both but can not get the video to work. Thanks.
Sorry, I don’t have any HDZero equipment.
Hi i'm andre , how do you update the servo's , thx
Darren is there a way to add yaapu to the frsky x18?
Hi Ruby, yes there is a repo for the Yaapu mapping widget for ETHOS. The telemetry script for ArduPilot also works.
github.com/yaapu/EthosMappingWidget
github.com/yaapu/FrskyTelemetryScript