This FIXES my BIGGEST gripe with the REDCAT51 telescope!👍

Sdílet
Vložit
  • čas přidán 6. 05. 2023
  • Support me on Patreon!: / cuivlazygeek
    EAF focuser mount
    www.etsy.com/listing/1163871474/
    Camera cable organizer
    www.etsy.com/listing/985038855/
    Cable manager for ASIAIR mini
    www.etsy.com/listing/1416774277/
    Redcat51 Bahtinov Mask: www.ebay.co.uk/itm/274951234332 or www.ebay.co.uk/itm/275840119898
    Redcat 51 telescope: bit.ly/439wf3E
    ZWO ASIAIR Mini: bit.ly/3OiGlv5
    -----------------------
    My equipment
    -----------------------
    Cooled camera: s.click.aliexpress.com/e/_DCY...
    SW Quattro 150P Budget Newt: bit.ly/3BABCxl
    Askar V Modular Telescope: bit.ly/3Imoq2M
    or bit.ly/3GLuyR8 or tinyurl.com/2h758bvt
    ZWO AM5 Mount: bit.ly/3BAS8x5 or bit.ly/3JeVUkn
    iOptron CEM70: bit.ly/431Ii2U (successor of my mount)
    MiniGuideScope: bit.ly/3MyUJhn
    Celestron C6: bit.ly/3ocePVs
    Hyperstar C6: starizona.com/products/hypers...
    Mini Computer (newer version): amzn.to/3LQTgTJ and amzn.to/3K6x2vy
    Cable management: www.etsy.com/shop/SmartCompon...
    Camera: aliexpress.com/item/400135931...
    IDAS GNB filter: idas.uno/space/en/IDAS/gnb.htm
    Flocking paper/Felt paper: amzn.to/3zASgvu or amzn.to/3m94zwa
    ----------------------
    Affiliate Links
    ----------------------
    NEW Agena Astro Affiliate Link: bit.ly/3Om0hNG
    General OPT Affiliate Link: bit.ly/2OIw6jH
    General High Point Scientific affiliate link: bit.ly/3lReu8R
    General All-Star Telescope: bit.ly/3SCgVbV
    Dwarf 2 Smart Telescope: bit.ly/3SyChXu
    General Amazon Link:
    amzn.to/3hTB5Ne
    Follow me!
    My Instagram: / cuivlazygeek
    My Facebook page: / cuivlazygeek
  • Věda a technologie

Komentáře • 169

  • @CuivTheLazyGeek
    @CuivTheLazyGeek  Před rokem +8

    Support me on Patreon!: www.patreon.com/cuivlazygeek
    EAF focuser mount
    www.etsy.com/listing/1163871474/
    Camera cable organizer
    www.etsy.com/listing/985038855/
    Cable manager for ASIAIR mini
    www.etsy.com/listing/1416774277/
    Redcat51 Bahtinov Mask: www.ebay.co.uk/itm/274951234332 or www.ebay.co.uk/itm/275840119898
    Redcat 51 telescope: bit.ly/439wf3E
    ZWO ASIAIR Mini: bit.ly/3OiGlv5

    • @Lacquerhead-TX
      @Lacquerhead-TX Před rokem

      I've been 3D printing accessories for my telescopes for years. Accessory rails for my iOptron piers, leg levelers for the same, all-sky camera and SQM meter housings, adapters, scope covers, etc. PETG is a pain to print but it does a fine job on mechanical parts. ASA is also a good material. I designed a focuser that used a cinema camera style Follow Focus rings which are essentially heavy rubber gears that you slide over the focus ring. That combined with a stepper and controller allows auto focus that you can easily disassemble to meet your same requirement.

    • @nikivan
      @nikivan Před rokem

      This should be a pinned comment.

    • @RodrigoPolo
      @RodrigoPolo Před 7 měsíci

      How can I contact the creator of this wonderful tool? I want to create something almost identical, but for a Tamron 150-600mm EF lens.

  • @crawlbow6664
    @crawlbow6664 Před rokem +11

    RedCat Team combine!

  • @simonpepper5053
    @simonpepper5053 Před rokem +6

    The Redcat was the first scope I got and it’s still my favourite. Thankfully I don’t need travel to image so the black cat mount suits me! Keep the videos coming Cuiv!

  • @perry3928
    @perry3928 Před rokem +2

    Hi Cuiv and thanks. What a beautiful rig. I will be getting same setup. It's been cloudy here for months. Hesitant to get it in fear of prolonging this horrible weather lol.

  • @heathbrook9478
    @heathbrook9478 Před rokem +4

    I traveled around Aus with a similar setup, using the gti sky watcher. I use to travel with a esprit’s 120 hahaha. I can vouch that this setup was great and I got some wonderful images especially while I worked in Uluru and northern South Australia. Also the fact that you can just pick up this setup as a whole and bring it inside when your finished is an added bonus.

  • @TheJoshuaCarter
    @TheJoshuaCarter Před rokem +2

    Oh man, that's a nice portable rig. Gotta love these little scopes!

  • @OddballsHobbyChannel
    @OddballsHobbyChannel Před rokem +1

    I love the way everything is neatly organised, I am very tempted

    • @CuivTheLazyGeek
      @CuivTheLazyGeek  Před rokem

      It's truly beautiful. Of course beauty isn't the primary criteria we should go for when buying something!

  • @davehenzel2171
    @davehenzel2171 Před 8 měsíci +1

    I'm brand new to this and I'm putting together an order for my first setup. I decided to go with the RedCat 51 II with the ZWO EAF, and was curious how it was going to work together. This video is exactly what I needed to see and gives me a lot more confidence in this setup. Appreciate the video and your commitment to educating newbs!

    • @CuivTheLazyGeek
      @CuivTheLazyGeek  Před 8 měsíci

      Good choice!

    • @t0bikage
      @t0bikage Před 3 měsíci

      Hi! Just wondering if you ended up buying this and how it has held up. Would you recommend this to others?

  • @rashie
    @rashie Před rokem +1

    👍👍- Gracias Cuiv!

  • @lukomatico
    @lukomatico Před rokem

    Awesome bit of kit and a wonderful video as always! Looks better than the one we have on our redcat51 for sure (with the permanent ring as you mentioned)
    Also, imagine my surprise when I saw you'd shouted out my bahtinov mask haha! Thanks so much for that mate, really good of you 👍👍
    Clear skies!

  • @beatsntoons
    @beatsntoons Před rokem +2

    This looks great, thanks Cuiv. Always kept one eye on the Redcats. Ended up with an Askar FRA400 but that’s been giving me trouble so might look into one of these

  • @tomhoskins4913
    @tomhoskins4913 Před rokem +1

    Outstanding work. Cuiv. keep up the great work. It is great to see you come around to the ZWO side of the force.

    • @CuivTheLazyGeek
      @CuivTheLazyGeek  Před rokem +1

      Thanks Tom! I think I've always acknowledged that the ASIAIR is very impressive - despite some limitations (some of which got fixed), but I still don't like the closed ecosystem :D

    • @tomhoskins4913
      @tomhoskins4913 Před rokem

      @Cuiv, The Lazy Geek It is th Apple 🍎 model, that is why I always went PC. I would be more upset if I did not like ZWO's other products. I was fortunate that I had ZWO camera s first.

  • @user-wz2fj3ns6j
    @user-wz2fj3ns6j Před rokem +1

    This is a great idea with the little slip in piece, as opposed to permanently mounting an entire ring. Like you said, this way lets you reverse the dew shield on the red cat for storage, and make it small for traveling.
    But I really like a competitors focusing system that puts the EAF bracket between the OTA and the Vixen dovetail. This way makes the width when lying flat small enough I can keep it in a smaller case. This system will not fit in my case, and I bought a Nanuk 920 just for it as the original WO soft case is not good enough..
    If the two systems could marry and have the focus motor below the OTA but not have to put on a permanent ring, it would be ideal.

  • @clearskiesastro1028
    @clearskiesastro1028 Před rokem

    Hi Cuiv, the ASIAIR backlash setting is really only used in manual focusing according to ZWO. The AF algorithm uses your AF step size and exposure time and thats' pretty much it, and it never reverses the focuser while finding the V curve, which is why backlash doesn't have any effect on it. Basically it only "backs up" before starting the V curve run, and then at the end of V-curve run to back up past the bottom of V-curve to find to final focus point. The amount it has to step back to get to that spot to start is big and so any normal or even large backlash amount will not have an adverse effect.
    I guess if one had a completely abnormal and massive amount of backlash, that the 2nd reverse to get past the V-curve bottom might not get past it, and fall on the "left side" by mistake instead of the right side of the V-curve, and then as its finding the fine focus point at the end, each successive iteration would yield a larger star size value. I'm not sure if the algorithm at that point would know it was on the wrong side of the V-curve and then backup even more to try a 2nd time, or just fail. Not sure how I would be able to test that scenario, if you have any ideas please message me directly.

  • @TexasEngineerScotty
    @TexasEngineerScotty Před rokem +4

    One other thing I think will be nice is that there are some occasions I find when I want to adjust focus manually but cannot because my ZWO EAF is attached. With that set up it looks super easy to slip the belt off and do a manual adjustment without having to have the focusing attachment plugged in or having to deal with the lag of manually focusing through the ASIAIR interface.

    • @CuivTheLazyGeek
      @CuivTheLazyGeek  Před rokem +1

      Good point as well! Kind of a manual "clutch" solution. I wish the EAF had that :-)

    • @GideonBAriel
      @GideonBAriel Před rokem

      Just release the two nuts and focus manually. Don't forget to tying the nurs.

  • @ChristianPsencik
    @ChristianPsencik Před rokem

    Wow that’s a very slick setup.

  • @tonysauser7562
    @tonysauser7562 Před rokem +1

    I have similar setup. I would like to see a solar photo/viewing episode. Love your channel.

  • @-Jeremiah-
    @-Jeremiah- Před rokem +3

    Cuiv! Love it. Chose the Redcat as my first scope because of the pluses you listed and the fact that I can add on things to improve my performance over time. That’s why I was so interested in the variable Askar? (That 60mm to 80mm scope you reviewed recently)
    Thanks for pointing out some things that I need keep in mind as I upgrade.
    Well… my Nikon, Redcat and star adventurer 2i are heading to the desert for a few days. I know it’s a full moon but it’s the American southwest, not Tokyo. Hehehe take care brother.

  • @olly7248
    @olly7248 Před rokem +1

    Excellent Cuiv, so tempted to swap out my fixed ring Redcat EAF setup 👍🏻

    • @CuivTheLazyGeek
      @CuivTheLazyGeek  Před rokem

      Well, if what you have does work, don't fix it!! :P

    • @olly7248
      @olly7248 Před rokem +1

      @@CuivTheLazyGeek True, it works but the rig is quite cumbersome and difficult to balance as it has a lot of vertical extension with the extra pillar to space the EAF under the scope… I have a 2600mm Pro and 2” x 7 EFW at the back so anything that reduces the weight would be helpful… great video by the way, given me food for thought 👍🏻

  • @mammouth2727
    @mammouth2727 Před 5 měsíci

    Merci pour cette vidéo. J’ai le même setup mais avec le AM3 et je l’adore. Et oui… l’écosystème ZWO marche du tonnerre mais est plutôt fermé

  • @gsevere2073
    @gsevere2073 Před rokem

    I suppose I would have you do what I bought my Red51 for, which is mosaics of the Sadr region. I suppose a regular dslr and lens would work too but I couldn't help myself and bought the redcat 51 anyway. I love the idea of now having an auto fucus solution for this wonderful ota.

  • @void_presence
    @void_presence Před 7 měsíci

    i've gone down the rabbit hole; I recently got an 8" dob; i have a Seestar S50 on the way; and this scope has caught my eye for if/when i get into 'real' astrophotography past the S50; super compact is a huge plus for me, plus it's RED--yes please. But it's going to be a while as i'll need to get an EQ mount for it too

  • @timliscum2861
    @timliscum2861 Před rokem

    Ive been using a Starlight Feathertouch focuser for years, similar belt drive

  • @BadYossa
    @BadYossa Před rokem +2

    Whilst I'm saving up for my next scope, I've spaffed some cash on a 3D-printed rig for my Samyang 135, which takes a janky old D5100 DSLR or my spiffy new 585MC. I also have the autofocuser kit, which uses a ring/belt system similar to what you described. Only had it a few days and might get a chance to use it tonight. Whilst it is not an inconvenience to remove the belt and ring, as this lens will be permanently in the rig, I can see that these 3D printed rings are quite delicate and repeated swapping out could potentially damage the unit.
    I don't have access to a 3D printer and the supplier is Germany, which mean around 10 days for a replacement , with crazy fees/courier costs to get it to me in the UK.
    That use case alone makes me interested in an alternative or upgrade solution. Timing belts are readily available and cheap. Custom 3D parts are another thing altogether.
    A very useful and timely vid mate.
    Arigato gozaimasu Cuiv san

    • @CuivTheLazyGeek
      @CuivTheLazyGeek  Před rokem +1

      That's a good point as well! Yeah 3D printed gears don't inspire confidence although in practice they should hold up quite well!
      But I did like the simplicity of the timing belt with that small tensioner, quite a smart way to deal with the problem

  • @AntonioPena1
    @AntonioPena1 Před rokem +2

    Hello Cuiv, I have similar setup and I use NINa and ASIAIR as well, I like your focused mount, I use the one 3D printed with the ring and I have perfect focus always, your setup has missing important feature I use, a automatic Flat light and cover, has drivers for Nina and since I got it have perfect Flats with Redcat automated without hassle, also bias and darks, this is the flat light I use made by Deep Sky Dad Flat Field Panel for WO Redcat 51, you must check it and your setup will be completed. Thanks for sharing this focused mount, thinking on replacing mine, just because red. BTW I also bought Luke’s mask, since auto focus works 100%, I only used like you to validate.

    • @CuivTheLazyGeek
      @CuivTheLazyGeek  Před rokem +1

      Automated flats sounds like paradise!

    • @stephanw196
      @stephanw196 Před rokem

      with this accessory in place would you choose the RedCat over the 61EDPH?

  • @MrGp3po
    @MrGp3po Před rokem +1

    Very cool EAF set up. Is it odd that my RedCat51 doesn't seem to drift in focus as the night cools? I use the Bhatinov mask to focus and it is always right on without adjustment. The RedCat51 is such a beautiful and high performance scope. So beautiful to crop photos and see images better than higher focal length scopes.

  • @rmf11699
    @rmf11699 Před rokem +1

    Gotta put that into the budget so I can put it on my Redcat!

  • @chinard
    @chinard Před rokem +1

    I have been using the autofocus adapter from deepskydad for a while now
    just recently swapped it out for the latest model that once set up, can be installed and removed without tools and includes a tensioner knob which i quite a bit
    It doesn't let you reverse the dewshield like the one you demonstrated, but the tensioner looks more solid on the deepskydad focusser
    But yeah, once you have a competent focusser on the redcat, it can do amazing things

    • @CuivTheLazyGeek
      @CuivTheLazyGeek  Před rokem +1

      Why do you even need a redcat if you have Tleilaxu eyes? :P although I guess they'd be just as affected by resolution limits!

  • @aradani3
    @aradani3 Před rokem

    BEUATIFUL!!

  • @LogansAstro
    @LogansAstro Před rokem

    Looks like a great focusing solution - nice and tidy and as you say, allows for reversing the dew shield for travel. My biggest gripe with the Redcat51 is that is doesn't have a flat field as advertised and has shockingly distorted stars out towards the corners, even with a 4:3 sensor, which is a pity.

    • @CuivTheLazyGeek
      @CuivTheLazyGeek  Před rokem +1

      Wow that is weird! The one I have has a very impressive flat field, with perfect stars in the corners of my APS-C size sensor... Lottery again?

    • @LogansAstro
      @LogansAstro Před rokem

      @@CuivTheLazyGeek I’m glad to hear yours is nice and flat. I even sent mine back to WO and they “fixed it” but the stars still wonky. Yes definitely the lottery.

  • @gregmckay666
    @gregmckay666 Před rokem +1

    Great looking rig but I'm waiting for the new RedCat that has the center-tube R&P focuser.

    • @CuivTheLazyGeek
      @CuivTheLazyGeek  Před rokem

      Yes that looks awesome! Although since the knob will be right above the dovetail I'm worried about EAF compatibility

  • @jfalcon1977
    @jfalcon1977 Před 8 měsíci

    Another great video from Cuiv! I would like to add this to my RedCat but, ¿has any of you had bad experiences with erratic guiding due to flexure from this (or others) 3D plastic mount? I have read about it and makes me worry and doubt whether I should go for another alluminium based solution. But the ones I have seen unfortunately raise the OTA up and that is not great for balancing/stability either. I guess it is always a compromise but would like to know about real life usage with guiding. Thanks!

  • @southbronxny5727
    @southbronxny5727 Před rokem +1

    I almost bought the redcat last month to make that dream setup.....but I resisted the impulse.....but it was hard.

    • @CuivTheLazyGeek
      @CuivTheLazyGeek  Před rokem

      It's a beautiful scope... I was really surprised to see excellent star shapes in the corners of my APS-C sensor, I wish I had a full frame camera to do further tests with!

  • @frogliza9977
    @frogliza9977 Před rokem

    Have you seen the new Redcat 61 that was announced? It has william optics new internal focuser, looks interesting!

  • @Neanderthal75
    @Neanderthal75 Před rokem +1

    There is a new RedCat coming out , the Redcat61 with a Rack&pinion focuser. I hope you get a sample of it, because the asking price currently nearly $1400 sounds way too much for me for a 60mm scope.

    • @CuivTheLazyGeek
      @CuivTheLazyGeek  Před rokem

      That's the internal focuser design version right? Yeah it does look like a beautiful scope!

  • @Mainuh
    @Mainuh Před 11 měsíci

    Great video Cuiv! Thank you. I am getting ready to sell my 10” dob and go back towards astrophotography. Been doing it off and on since the early 90’s. Spent many nights in frigid Maine in the dead of winter with a Meade 8” SCT LX-200 and Pentax K-1000 film camera. I think the Redcat 51 will be a nice portable solution. I’d love to have the AM5 mount for it, but having a hard time swallowing the price. Will likely go with a Skywatcher EQM-35i as I can but that, the Redcat 51, ZWO guide scope & camera (120) and ASIAir Plus for about the cost of the AM5 mount alone. Would just need a good astro camera. What camera would you recomend for my 1st astro camera? I do have (2) Nikon D5300 DSLR’s (one is astro modified) so I can start with DSLR. I used to have a WO Zenisthstar 73mm on Celestron AVX mount but I always struggled with getting sharp focus on my DSLR prime lenses. Hoping the ASIAir Plus will help resolve the focus issues. Also love the cable mamangement in this video! Already ordered the ASIAir plus cable manangement as well as the ASIAir mount. Thanks for another great video! We’re in Tucson AZ from Oct thru May and looking forward to getting back there and dabbling again in Astrophotography!

  • @user-lt9py2pu6u
    @user-lt9py2pu6u Před rokem +1

    Looks good, think I may get one to replace my current home made electric focuser which only works as a remote manual control. Know what you mean about the ASI - I ended getting an Eagle LE for my main imiging set up as that supports all of the gear I use (including ZWO)

  • @jonathankelly5997
    @jonathankelly5997 Před rokem +1

    Have you thought about doing a test using NINA autofocus with that setup - minus ASIAIR of course? I say because the NINA autofocus manual specifically mentions needing minimal backlash, and this looks like it has a fair amount ...

    • @CuivTheLazyGeek
      @CuivTheLazyGeek  Před rokem

      I tested with NINA, good results thanks for Overshoot Backlash compensation !

  • @KaidenBainAstro
    @KaidenBainAstro Před rokem

    Do you have an opinion on the svbony mk105 maksutov scope?

  • @TomEEvans
    @TomEEvans Před rokem +1

    Cuiv, what camera are you using with the Redcat 51. I’m using the ASI 533, but I find it to be under-sampled. Is there an ASI camera/scope match you would recommend? (Yup, this is the nemesis of going to an ASI-only system).

  • @desmcmorrow2978
    @desmcmorrow2978 Před rokem +4

    Been using the deep sky dad system for last few years. Works flawlessly. However I get the point you are making about transportability. Now I am thinking that this might be a generic solution for attaching EAF to camera lenses. I have several absolutely super sigma lenses for Astro - 40mm and 18-35mm - which at f1.4 and f1.8 are tricky to manually focus. This may be a way to avoid having to print different focus rings for each and every lens. I was looking for a micro tensioner but this is a light bulb moment! Cheers, Des

    • @CuivTheLazyGeek
      @CuivTheLazyGeek  Před rokem +2

      I hadn't realized there was that huge ecosystem of custom Redcat accessories! It's a shame that telescopes that come with helical focusers don't have a fully thought out solution by default (like the Askar 200 solution puts the EAF under the lens which is just bad design...)

    • @desmcmorrow2978
      @desmcmorrow2978 Před rokem

      Indeed some of the solutions are really ingenious and make using the redcat even more of a pleasure. Best value scope in terms of quality per currency unit IMHO. Have an AM5 - also flawless - and an AM3 on order for a super portable setup. Thanks for all of the inspiring and informative videos. Cheers, Des

    • @zborkz
      @zborkz Před rokem +1

      @@CuivTheLazyGeek The redcat 71 appears to have corrected that oversight with a built in geared ring for an EAF

    • @marcusa3177
      @marcusa3177 Před rokem

      Are those lenses fully-manual? Unless there are off-the-shelf scope rings that can fit said lenses, you'd still be printing a ring for each lens, and then there's the question of finding a timing belt with the right diameter. But hey - that's why conduit clamps exist, right? LOL
      Srsly though - I'd probably check for scope rings, and ask if the maker will sell a version of this such that the EAF bracket is just screwed into the M6 holes of said scope ring. Might just work, right?

    • @zborkz
      @zborkz Před rokem

      @@marcusa3177 as far as a belt the diameter and teeth that is commonly used in 3d printing work perfectly with the ZWO AEF included gear assemblies

  • @ciskje71
    @ciskje71 Před rokem

    1) PETG is not stronger than PLA but weeker under normal ambient temperature, PETG has a bigger glass transition temperature only. (a big pro for pieces that need to be outside in summer). PLA has a greater layer to layer adesion.
    2) clearly the center line on the bahtinov mask image on asiair is slightly off center on the left

    • @CuivTheLazyGeek
      @CuivTheLazyGeek  Před rokem

      Thanks for the precision! Yeah PETG is more durable and more flexible as I understand it
      Someone else noted the same and did the calculation, the line is 0.93 pixels off center, which has effectively no effect. Could be due to the focuser, the ASIAIR focus algorithm, the sky not being fully dark yet, and other factors!

  • @danielduesentriebjunior
    @danielduesentriebjunior Před 10 měsíci

    Shouldn't this also work on a Skywatcher 50 ED? Maybe with some self made adaptions?

  • @azastro919
    @azastro919 Před rokem +2

    So why not print a bracket that allows you to adjust the eaf itself for tension and remove the tension piece all together? That way you remove a piece that can get lost, and you remove an entire backlash piece.

    • @CuivTheLazyGeek
      @CuivTheLazyGeek  Před rokem

      A timing belt directly on the focuser grip doesn't look like it would mesh well without putting an ungodly amount of tension in the belt, not sure I'd like that...

  • @robertgrenader858
    @robertgrenader858 Před rokem +2

    I have the ProAstro Gear focuser bracket on my RedCat and love the performance. But never mind, is the compact tripod on the AM5 an issue with your terrace and the high wall/railing?

    • @CuivTheLazyGeek
      @CuivTheLazyGeek  Před rokem

      I've lowered the tripod intentionally to help protect the setup from wind! It has been working great!

  • @KamiDavid
    @KamiDavid Před rokem

    I've been researching more about astrophotography and trying to get into it, im set on getting the RedCat 51 but I'd also like to know what the visuals are like for it. For the moon and planets. Does anyone know how well they look?

  • @rmf11699
    @rmf11699 Před rokem

    Is that EAF focuser the standard or the advanced version?

  • @MrTurkeyfried
    @MrTurkeyfried Před rokem +1

    Super sexy, super beautiful, super red 😂, I just got the star adventurer gti and I’m shooting with a mirrorless and an old canon fd lens. I’m processing in Siril and the whole experience has been absolutely rewarding. I appreciate a look into ultra portable setups as I would prefer to move in that direction. Astrobackyard may have gotten me with the narrative style sometime ago but you and Nebula Photos are now my favorite channels. I want to say thank you for taking the time to explain things so thoroughly and thoughtfully.
    A question: If you have a filter wheel can we see a full ZWO setup?

    • @CuivTheLazyGeek
      @CuivTheLazyGeek  Před rokem +1

      Thanks Adrian! Currently I'm all in with OSC cameras so no filter wheel in the near future!

  • @wacpet
    @wacpet Před rokem

    I just received the same system and just mounted it yesterday to my Redcat V2. I found the belt to be too loose with the pulley. Luckily I had a bigger pulley at hand and now ist seems to work perfectly.

    • @CuivTheLazyGeek
      @CuivTheLazyGeek  Před rokem +1

      That's actually disappointing. I hope you've provided feedback to the seller!

    • @wacpet
      @wacpet Před rokem

      @@CuivTheLazyGeek Hey Cuive! Not yet, but I will do so today. What really astonished me was that it seems to fit with the redcat v1 that you are using in the video.

    • @CuivTheLazyGeek
      @CuivTheLazyGeek  Před rokem

      @@wacpet I wonder if the redcat V2 focusing ring diameter has changed slightly...

    • @wacpet
      @wacpet Před rokem

      @@CuivTheLazyGeek that’s what I thought, too. I measured my Redcats focusing ring diameter. It is about 75mm. The pulley I received with the mounting set has a diameter of about 9.5mm and the pulley I replaced it with is 12mm in diameter. With that pulley the belt fits like a glove around the Redcat.

    • @johnceko2478
      @johnceko2478 Před rokem

      @@wacpet Peter - I have a Gen 2 Redcat as well, and have the same issue with the belt being loose - where did you source that other pulley?

  • @nikaxstrophotography
    @nikaxstrophotography Před rokem +4

    If only the asiair worked with other cameras/focusers etc. they would sell 5-10 times more of these

    • @CuivTheLazyGeek
      @CuivTheLazyGeek  Před rokem +2

      They would... Even if it was unofficial "at your own risk" support (which could be an issue with the "it just works" image of the ASIAIR). Also they could lose out on the camera market, which I assume has far bigger margins!

    • @olly7248
      @olly7248 Před rokem

      They would sell less of their more expensive gear, that’s why… 😉

    • @nikaxstrophotography
      @nikaxstrophotography Před rokem

      @@olly7248 I wonder if another manufacturer who don't have a vested interest in camera can come up with a similar concept like the asiair and its simplicity

    • @CuivTheLazyGeek
      @CuivTheLazyGeek  Před rokem +1

      @@nikaxstrophotography I'm waiting to see how the Stellarmate Pro will end up being

    • @nikaxstrophotography
      @nikaxstrophotography Před rokem

      @@CuivTheLazyGeek here's hoping it will be as easy as the asiair

  • @deep_space_dave
    @deep_space_dave Před rokem +1

    Every time I see this all red setup it is just beautiful! Who care if it even works, it is just nice to look at LOL (JK 🙂) Thanks for another great video! Clear Skies!

    • @CuivTheLazyGeek
      @CuivTheLazyGeek  Před rokem +1

      Hahaha lol buying astro gear just to look at it, that works too :)

  • @tjsastrophotography125
    @tjsastrophotography125 Před rokem +1

    The new Redcat 61 fixes the focuser. The RedCat 61 corrects that and then some. Featuring the all-new, William Optics Internal Focus Design (WIFD)

    • @CuivTheLazyGeek
      @CuivTheLazyGeek  Před rokem

      Finally!! One thing they don't fix is the price :-)

    • @MikeJProto
      @MikeJProto Před 6 měsíci +1

      They also made the Redcat 51 gen 3, which is just the recat 51 but with the redcat 61 focusing system

    • @MikeJProto
      @MikeJProto Před 6 měsíci

      ​@@CuivTheLazyGeeki think the new recat 51 gen 3 is the same price as the regular redcat 51

  • @robertw1871
    @robertw1871 Před rokem +1

    Looks like a nice rig…

  • @andrebremer7772
    @andrebremer7772 Před rokem +1

    This looks like a decent solution! It’s not visible in the video, but did you observe any flex in the part holding the EAF when adjusting focus? That has been my major gripe with solutions like the Black-Cat EAF bracket. It wasn’t stiff enough and added an unholy amount of backlash to the focus mechanism.

    • @CuivTheLazyGeek
      @CuivTheLazyGeek  Před rokem +1

      Good point to check! I just double checked, I didn't see flex - was the backlash something that actually affected the focus?

    • @andrebremer7772
      @andrebremer7772 Před rokem

      Good to know that PETG makes a difference here! While the Black-Cat sorta worked, it was hard to dial in consistent focus curves. I would get different focus positions for subsequent runs, etc…

    • @CuivTheLazyGeek
      @CuivTheLazyGeek  Před rokem

      @@andrebremer7772 I'll do some further tests to be sure!

  • @erpagris1377
    @erpagris1377 Před rokem +1

    How is the guiding with the guide scope connected to the 3-D printed bracket? I had a similar setup on my RedCat, the ZWO mini , ZWO focuser and ASIAir all on the 3D printed focuser bracket, and the guiding would go crazy during the focusing routine. Seemed like there was flexing. Ended up not using the 3D printed focusing setup nor the mini guide scope. I wish someone would make a bracket out of aluminum.

    • @CuivTheLazyGeek
      @CuivTheLazyGeek  Před rokem

      Aaah that's a good point! I didn't notice Any issue when I imaged with it but I'll test specifically and get back to you!

  • @uschi414
    @uschi414 Před rokem +1

    Apart from the speed differences, how does the image quality compare to your C6 hyperstar? I expect the Redcat's corner stars are going to be better and I expect chromatic abberation of the Redcat to also be better. But is it enough better to get you to give up your C6 hyperstar in the light pollution Meca that is Tokyo where speed is king?

    • @CuivTheLazyGeek
      @CuivTheLazyGeek  Před rokem +1

      I was very impressed by the stars both in the corners and in the center for the Redcat. Absolutely perfect. The Hyperstar's advantage is in speed "only". It's a tough question. For a beginner though, I'd recommend Redcat over C6 even in Tokyo...

  • @astroneil78
    @astroneil78 Před rokem +1

    It’s the only telescope I have that gives me perfect stars to the corners with a full frame camera. Even my fsq 85 can’t match the redcat in terms of optical performance.

    • @CuivTheLazyGeek
      @CuivTheLazyGeek  Před rokem

      I didn't mention it in the video, but the stars in the corner of the APS-C were absolutely perfect, truly impressive

    • @astroneil78
      @astroneil78 Před rokem

      @@CuivTheLazyGeek definitely a keeper cuiv 👍👍 haha

  • @zborkz
    @zborkz Před rokem

    I have a very sim setup, it's so light and so easy to move and setup it feels like cheating. I agree that the ASIAIR has made amazing progress, and it's viable solution if your are willing to commit to ZWO equipment limitations. How about that guiding with the AM5, mine has been outstanding.

  • @uanesdeiro
    @uanesdeiro Před 8 měsíci

    Hi, even if I'm going a little off topic, I'd like to ask you a question: I've owned the RedCat51 for some time and I really like it,
    but for me it has a problem that I can't solve. WO states that it is correct up to FullFrame format, but for me this is not the case!
    With the Canon Eos 60D Reflex, the stars at the edges are deformed and if I use the ASI2600MMpro even worse and both are NOT FullFrame,
    but APSC, so this problem shouldn't exist. I thought that the BackFocus is not correct,
    but the shopkeeper told me that with this type of lens there is no need to correct this BackFocus.
    I tried to make some adjustments on the Tilt, but I can't improve the problem and the stars continue to be deformed
    at the edges and on the 4 corners the deformations don't sound the same, but each corner has a different deformation!!!
    Have you had the same problems? Or am I the one doing something wrong?
    Thank you for any response.

  • @CDigata
    @CDigata Před rokem +1

    I went with the FRA300 instead ✨✨✨✨

  • @marvinwhisman3333
    @marvinwhisman3333 Před 21 dnem

    If you are still using this EAF belt drive, are you still happy with the performance. Trying to decide on belt drive vs gear drive. Thanks for any suggestions.

    • @CuivTheLazyGeek
      @CuivTheLazyGeek  Před 21 dnem +1

      Yep, still using it, and for the moment it's still working very well for me :) I'm sure gear drive would work very well as well - you do have backlash in both (from belt tension in one, from the gear in the other)

  • @jeffbrennan5394
    @jeffbrennan5394 Před rokem +1

    Curious to know what that set up would cost from ZWO? Thanks for sharing 👍

    • @CuivTheLazyGeek
      @CuivTheLazyGeek  Před rokem +1

      I don't think ZWO offers a red cat focusing solution... But they should! Made with aluminium !

    • @jeffbrennan5394
      @jeffbrennan5394 Před rokem

      @@CuivTheLazyGeek All the red had me thinking it was zwo. That set up is very impressive and the envy of many Astro enthusiasts.

  • @astroattorney
    @astroattorney Před rokem

    I made a modification to the Redcat autofocus system that I have so I can also use it with my Pentax 70-200mm f2 lens. #chefskiss

  • @viniguez487
    @viniguez487 Před rokem

    ASIAIR has its shortocmings but it is definitely the go to lazy astrophotographer setup.

    • @CuivTheLazyGeek
      @CuivTheLazyGeek  Před rokem

      Actually I found it really painful to have to physically go and get the subframes off the ASIAIR haha! I'm far lazier with NINA!

  • @marcusa3177
    @marcusa3177 Před rokem +1

    lemme guess - you're gonna buy another tube? I mean, red is the color of Nippon. And red paint makes your imaging train faster LOLJK.
    I personally prefer this layout over some rigs that put the focuser on top or at the bottom of the tube. If there's one thing I'd do to improve this focusing rig, it'd be adding provisions (e.g. threads, grooves) so I attach the small counterweights used by gimbals to allow for perfect balancing on all axes.

    • @CuivTheLazyGeek
      @CuivTheLazyGeek  Před rokem

      I'm still resisting!

    • @marcusa3177
      @marcusa3177 Před rokem

      @@CuivTheLazyGeek nooooo, join us in the red side loljk no that's the path to burnout and poverty, and it's not as if you already have multiple mounts all ready to go.
      Huh, I wonder if the makers of those rings are cool with making one-offs. I do have this vintage Nikon 300mm f4 in my cabinet, that FL is almost the midpoint between the roki's and the Svbony SV550. That would mean buying yet another EAF but hm, food for thought eh?

  • @scottrk4930
    @scottrk4930 Před rokem

    Sounds like you would appreciate the chance to review the new StellarMate X ? Just ask Jasem to send you a sample . Hint hint .

    • @CuivTheLazyGeek
      @CuivTheLazyGeek  Před rokem +1

      This is funny, it appears to be a MeLe Quieter 2 with Stellarmate OS preinstalled! I'd be up for trying out the upcoming Stellarmate Pro though!

    • @scottrk4930
      @scottrk4930 Před rokem

      @@CuivTheLazyGeek Well spotted ! The Pro will be available in June . Hope you can get a sample to review .

  • @AngelFREAK131
    @AngelFREAK131 Před rokem

    I do NOT like the asiair for two reasons. I have worse guiding than PHD2 + NINA. And the flats wizard with auto dark flats in NINA is SO good.

  • @lupixus
    @lupixus Před rokem +1

    Nice design for the focuser mount. But let's be serious : that wasn't a perfect focus. That auto focus was a an offense to redcat's sharpness. You can clearly see that the middle spike is not in the center

    • @lefterischristopoulos8848
      @lefterischristopoulos8848 Před rokem +1

      It's in the center ..it's perfect

    • @CuivTheLazyGeek
      @CuivTheLazyGeek  Před rokem +1

      You had me look back at the image and double check the raw frame (which I still have), it looks perfectly centered and in focus to me!! I'm actually super impressed by the sharpness of the Redcat all across the field of view!

    • @mathersdavid5113
      @mathersdavid5113 Před rokem

      You are correct. The vertical spike is too far to the left.

    • @CuivTheLazyGeek
      @CuivTheLazyGeek  Před rokem +1

      @@lupixus hahaha I think we can both be right and wrong at the same time in this case :-) glad I wasn't insulting the Redcat!

    • @lupixus
      @lupixus Před rokem

      @@CuivTheLazyGeek, insulting is not your thing (you are too lazy to insult something or someone 😝). Insulting is ZWO's thing. 😁

  • @antonypage1442
    @antonypage1442 Před rokem +1

    if nina had a phone app that would connect to mini pc. 🥰

    • @CuivTheLazyGeek
      @CuivTheLazyGeek  Před rokem

      You do have a web monitoring tool you can access from your phone :-)

    • @antonypage1442
      @antonypage1442 Před rokem

      @@CuivTheLazyGeek yes I use TeamViewer or RDP. But my screen is small and it's cumbersome to navigate. A simple interface like the asi air app would be awesome.

    • @CuivTheLazyGeek
      @CuivTheLazyGeek  Před rokem

      @@antonypage1442 oh I'm taking about one of the NINA plugins - not remote desktop! Although it's monitoring only

  • @Panotaker
    @Panotaker Před rokem

    Personally, I think motorized focusers are ugly, so I don’t have any on any of my scopes, but I can see the convenience.

    • @CuivTheLazyGeek
      @CuivTheLazyGeek  Před rokem

      For me it's a necessity to deal with focus shift throughout the night...

  • @Oxizee
    @Oxizee Před rokem

    Out of my price range, Redcat51 :(

  • @astroguypodcast
    @astroguypodcast Před rokem

    Another great video! Thank you for posting it. I had a similar issue (focus) with my Samyang 135mm lens. Fortunately, a similar setup is available that works great.
    I have to thank you as well. I just published a video and I referenced you (and a few of my personal astrophotography influences) in it.
    czcams.com/video/PBFP1GGBpBw/video.html

  • @anata5127
    @anata5127 Před rokem

    This is a plot to push you towards ASAir. Be careful!

  • @darrenwilliams414
    @darrenwilliams414 Před rokem +1

    £81.91 for less than £3 worth of plastic yeah just buy your own 3d printer & print one yourself,,the point of 3d printer's is to print at home for a few pence not to pay someone else a extortionate amount to print it for you & there is a few on thingiverse, just buy your own 3d printer

    • @CuivTheLazyGeek
      @CuivTheLazyGeek  Před rokem

      That's the problem with 3D printing, especially with difficult to work with materials like PETG, there's a lot of time spent printing, a lot of prints need to be discarded, the filament humidity needs to be well controlled (filament dehumidifiers, etc.), so it's very difficult to scale. I can't comment on the price, except that it seems in line with other solutions... and while 3D Printing it's amazing I found it's a bit of a rabbit hole like astrophotography is :-)

    • @darrenwilliams414
      @darrenwilliams414 Před rokem

      @@CuivTheLazyGeek 3d printing is very cheap £80 is way too much it's £10-£20 for a kg of filament & the electricity use is less than a pc

    • @nikivan
      @nikivan Před rokem +1

      There is more to the economics of the 3D printing business than just the cost of filament and electricity. You are basically questioning why would anyone pay $45 for a steak at a restaurant when the price of the raw meat is only a few bucks.

    • @darrenwilliams414
      @darrenwilliams414 Před rokem

      @@nikivan because they are crazy & like being ripped off

    • @darrenwilliams414
      @darrenwilliams414 Před rokem

      @@nikivan also the only 3d printer business should be the printer not the print the point of 3d printers is to print at home for pennies

  • @ssrattus
    @ssrattus Před rokem

    A comment is worth 10 likes :)

  • @johnsmith-rd9rr
    @johnsmith-rd9rr Před rokem

    It would be nice if you answered your email!

    • @CuivTheLazyGeek
      @CuivTheLazyGeek  Před rokem

      Sorry John I get a lot of emails and other messages on the social platforms, many of them quite long, detailed and asking for help or opinions, and require me to do some research before I can reply - I'm unfortunately just one man with a full time job besides my CZcams, and simply don't have the time or will to reply to everyone... When I do it is usually with significant delays.