SCX24 - CARBON V2 CHEAT CODE / WILLY CAB BUILD: MAZZ DESIGNS SLIDERS, WTMicro BODY, CEDAR INRUNNER
Vložit
- čas přidán 26. 07. 2024
- (O.D. fix video here: • SCX24 - WILLY CAB / CH... )
Jumping right into another WTMicro / Mazz Designs Cheat Code, but his time using the Willy Cab while still utilizing the Mazz WT-FJ sliders. This one gets a link stretch and some sexy wheel sets. Plenty of surprises and tips along the way as always. Enjoy!
(Don't forget, you can watch at faster speeds in "Settings" to save time!!)
#scx24 #nsdrc #furitek @mazzdesigns6929 @MofoRC @rcsteve710_
0:00 - INTRO / PAINT, DETAILING & WILLY KIT
3:21 - MOUNTING FITMENT
5:57 - AXLE ASSEMBLIES & SUB ASSEMBLIES
6:44 - ASSEMBLIE NOTES
9:27 - SERVO INSTALL & AXLE WEIGHTS
9:41 - CHEAT CODE KIT
12:01 - BODY/SLIDER FITMENT
14:05 - INITIAL SLIDER SETUP
15:27 - LINK OPTIONS
16:45 - NEW FRONT END SETUP
19:19 - MOTOR INSTALL/FRONT MOUNT
22:16 - ELECTRONICS OVERVIEW
24:05 - REAR SUSPENSION TWEAK / DRIVESHAFT INSTALL
25:39 - MOTOR TEST
26:31 - REAR DRIVESHAFT MOD
27:32 - MAGNETS
28:18 - ELECTRONICS/LED INSTALL
32:31 - SERVO TRAY INSTALL FIX/NOTE
33:38 - WHEELS/TIRES (SET 1)
36:57 - WHEELS/TIRES (SET 2)
39:04 - WHEELS/TIRES (SET 3)
43:23 - WEIGH-IN
43:47 - CEDAR MOTOR MOUNT FIX
47:36 - QUICK MOTOR RE-TEST
49:13 - O.D. & DRIVELINE NOISE TEST
52:14 - TABLETOP TEST
58:03 - FINAL DETAIL, LOOK & THOUGHTS
1:00:56 - GALLERY - Auta a dopravní prostředky
Team 3!! The polish edge, deep dish with bronze spokes is killer.
Ps: you might want to dbl check that OD, it’s 7.5%, not 33%.
I thought that was a lot of spins. I got two different ones in one package… maybe I mixed up the worm gear…. Mismatched to the marked gear. I’ll pull it and check!
@stunod269 Hey man, just wanted to say thanks for spurring me on to dig back into the O.D. Figured out the mystery... czcams.com/video/2wSeCoZgAiA/video.html
Thanks again brother! The best of us can still make mistakes... 🙃
Back watching again, watch live really love this build. 👍👍😎
Heck yeah Andy, waking up easy!
I love watching these videos! I always learn so much :)
Right on brother. Glad someone is paying attention…😂😂
Ugh! You do such incredible work.
Truly an artist of the trade.
Inspirational.
I just bought this same chassis.
Was trying to decide on the chassis for a while.
Went from considering an Akers chassis (they have terrible customer service), to a Killr Spectr Pro XL (out of stock), and now this...
Which is after all consideration the best choice, IMO, and I'm glad the other two choices fell through.
I have nylon X15 axles coming with brass in all the right spots, Nexx oil shocks, a Futitek Torpedo Brushless Power System, and some a nice body on the way...
But now you're making me consider a similar body.
Such a beautiful rig, the way that belly looks with those sliders and all, what a package!
Thank you!
Oh heck yeah, you made the right choice! I love the CC chassis. Great design and function, and those WTM specific sliders don’t hurt either! I’m actually wrapping up another CC/WTM FJ. Should have that up soon. You’re going to enjoy the build no matter what body, but obviously, I’m bias…😂
@@bcochenerhey i have a question, sorry to bug you i know you're busy, is there a transmission that will have that cedar motor "centered" between those links?
Thanks again, I'm so looking forward to your new build!
@@MrsRabbit8 No, the transmission is the standard part, the motor mounts are what position the motor. I only know of the one Cedar mount that Furitek sells. And it may already be positioned as good as it can be. All dependent on the pinion size/vs the can size in squeezing it next to the transmission - and still meshing. And that Cedar has a tiny pinion
Definitely the third set of wheels, holy cow those look good!
I think so too! Thanks Gary!
I love the Willy’s Cab from WTmicro, so rad to see this! I love the brass super 8s!
Have to say the white rims and the bronze my favorite. Well as always appreciate the build video wow is she beautiful. I’ll watch for the next one until then peace and chicken grease 😁👍👍😎
Thanks for tuning in.. again Andy!! CHEERS BROTHER!
awesome build 😊
@@rcjoe406 appreciate ya!
This build is sick. I want it with a land cruiser body 😮
Do my head is off to you bro because like you are meticulous you do a very killer job and showing people the little stuff like to look for and to look at
I love his bodies. I did roll mine a couple times and it broke. So the roof comes off pretty easily. Looks good my dude!
Thanks buddy. Did you see he is now printing bodies in resin as well as a different plastic that is less brittle. May be time to replace the body??
Killer as always. Thank you for inspiration brother!
Appreciate that!
You have the cleanest electronic and wire placement in the industry
Haha, thanks!
Great Job! You definitely knocked this one out of the park! 👌🏻 I just received my Willy's body from WT micro and you gave me some really good ideas.
Appreciate that! Good luck with your build. Any direction you go with it, you know it's going to look good!
The bronze rims my favorite 👍👍😎
Best servo for the best chassis
👍💯
You should see them when they have been took to a torch obviously without the plastic ends on there
I done the Excel and I done it in the titanium frame rails and his links in titanium and I took them to a torch and do they colored up so beautiful ain't funny man it's just amazing looking
I think I am about to try and flame some Ti links. Any tips? I assume just a little torch would suffice.
Say I use the mofo brushless mount on that motor I didn't use their little one but I do have two of them and that is nice to know that it will work on that I forgot it is the 9 mm spacing and the 12 mm spacing
Hit the like button everyone
Thanks for stopping in Chris! good times!
48:58 just blew my mind! Sooo slow!
paint it rust red with black "diamond plate" fenders, rockers and cab corners ❤
Well it’s a little late for paint suggestions, but good idea!
better yet, dust a couple light coats of guide coat over the rust red for a natural patina like... was it a high trail or a k5?
I would definitely go with the last set the wild card not just cuz the look but also to try something different for our sake compound
Haha, yeah I hear ya! Cheers!
Fantastic! Didn't you once use a cyclical switch for the lights? I'm looking for something like that.
Thank you! Yes I’ve used the one from Club5 on several builds.
@@bcochener sweet! Thanks for the info.
I’m on team black
Right on!
Outstanding Build Brian 👏
Definitely prefer the bronze set of wheels and tires, the lighter colour really compliments the darker cab.
Where can I find those exact lights for my WT Jeep?
Thanks mate! Yeah I really like those as well. Sucker for bronze! The LEDs - @28:39 they’re from Evan Designs, but you could find the equivalent down under I’m sure. Warm white, 3mm and 1.8mm. 5-12volt.
@@bcochener Thanks mate
If you go to Akers engineering and get his motor mount for the mini Komodo not the micro but the mini it puts that motor in the center and it angles it down
I have seen that. got a buddy that is building a couple akers rigs right now. looking forward to seeing them
Amazing looking rig , I’m having trouble finding screws for the shocks after adding spacers nothing seems to be long enough any advice? 10 mm is not enough
Thank you! Gotta use the 12s. They’re harder to come by. They come in the hardware kits usually (but only like 10 or so). Mazz sells some kits. Amazon has them too.
I actually special order just 16s for the large stacked steering links-through knuckle connections as well. Never seen that length typically.
Love your builds , would you ever sell one of these ? I use to have a 51 Willy’s pickup and I miss it so much would love to have one of these so I can try and paint it like my real truck use to be
I may sell off some coming up at some point. If you want this Willys body, you can pick one up on Etsy from WTMicro. They come unpainted, so you could do it up how you want to match your 1/1 Willys. Cheers!
@@bcochener thanks ! I just ordered my Willy’s body ! I had a question what type of paint would be good to use on a 3D body ?
@@ismaelreynaga4943 I have typically used Tamiya primer and paint. Wash the body with dish soap first. In this Willy Cab, I used Krylon Fusion all in one primer/paint. The key is wash and dry good first.
What led switch do u use
Club5 Racing makes a cyclical switch. That’s the one I’ve always used.
@bcochener is it the Electronic Cyclic Switch ( Dual Output ) for RC Aux Channel Lighting Control
@@WestDesertRcthat’s the one
@@bcochener ok thx
(by chance do you mind if I ask- do you sell these ever?).
I haven’t just yet, but I plan on it coming up at some point. I have too many to enjoy them all. It’s hard to let them go though…
I have not seen cleaner printed parts that maze designs
Same!
Excuse me ...
Maybe I'm stupid but where is the axial sxc24?
I only see a bunch of different brand parts but no axial scx24?!
Even the electronics are changed!
So, you should instead say "I'm making" a mini crawler.
Otherwise I like the video but for me there is no more scx24...
Scx24 is the platform. It’s all a SCX24 based… driveline, chassis, etc. so yes, I think you are confused. The transmission and driveshafts are stock Axial parts.
@@bcochener haaa ok !!
There were so many pieces that I no longer understood anything!
Thanks for the response, in any case the mini is superb!