Rich Evans Solution Finish "Bring The Black Back"
Vložit
- čas přidán 26. 10. 2011
- "A revolutionary product developed by professionals for professionals." Solution Finish instantly restores the faded, weathered black trim and metal pieces on almost anything. KwikFilms was there, highlighting Rich Evan's new product that "Brings The Black Back." To purchase visit www.solutionfinish.com
- Auta a dopravní prostředky
I think I'm going to park my Volvo near his shop so he'll get tired of looking at it and do it for me also LOL
Lmao amazing comment
No doubt lol
I just got Solution finish and works great
Finally!!! I have tried everything on my 08 dodge caliber SRT4!! Be buying some of that
If you scrub the panels down with a degreaser and a brush it will look way better.. Not to mention if you want a permanent solutions use gtechnique c4 its an actual plastic molecule last forever.
A must have for any professional detailer. Will be doing a review video soon. Feel free to hook it up with some products 😉😉
BY FAR THE BEST STUFF EVER!! VERY SMOOTH LOOKING, TAKES A VERY SMALL AMOUNT... I USE A FOAM PAINT BRUSH.
just used this product a few weeks ago it's the best thing I've seen. I took and alcohol prep then applied it. 07 Avalanche I took the 3 panel off prepped them. so far it's still going and looks good!
Travis Johnson hey where did you buy it
Progressive One Amazon
Travis Johnson bg
I used the product from Meguiars on my 2007 avalanche and it worked good.
Lasted 2 weeks and now back to faded Do not waste your money
A way to ensure a longer finish is to put a seal on top.
Use a black plastic dye instead. It will permanently stain it black
Most of this products are just shine.
Did you prep the surface? IPA wipe down
My question is what does it look like after A-day a week or a month? is it long term or just a temporary fix
Temporary. after 2 months you need to redo it
Try Turtle wax F21. Lasts about 4-6 weeks. Using it for several years--on my second bottle. I highly recommend it.
the product looks great, how long does that restoration last to reapply
There was a camera in the room where that guy was sitting lol
Hey have a minute, he looked so surprised
I have used this stuff and it is great
I need this asap!!! Holy sh.......
thank u
Will this product work on my tan avalanche with grayish tan plastic?
Pretty awesome product! I can definitely use this on my black supra. how much is it?
I’m confused. I have a 2006 Nissan Xterra. Some of the trim is black but some is better described as dark gray. Can I use the black formula or do I need both black and gray?
Car Warriors Dude
is it durable in long time rainning
Clear coat is the best soulution
Can I use it on my tires?
How long does it last till you have to hit it again?
Rich Evans looks different ...
My trim is dark grey will this work?
Exactly how long does this last?
Thumbs up for using gloves.
how long will it actually last before I have to reapply..
What if you have gray cladding ?
Exactly what I thought
Did he use a IPA Wipe first to prep the Surface?
How long does it last I have tried some other ones in the past and 2 months it’s right back like it was, so is this any better? How long will it last?
Is this the same Solution Finish from Chris West???
put a clear coat after you're done renewing the plastic because that way it protects the plastic from the sun's rays
website?
Can I use it on doors panel Beige
Very cool! Is this more like a temporary fix that should be reapplied periodically? Does it contain any UV-resistant qualities or do you have a UV-resistant topcoat that you recommend? I'm in Phoenix, AZ, USA - the sun is brutal on vehicles!
Have you tried it?
How long will it last for
where can I buy this?? My Avalanche needs it ASAP!!!!!
diana ontherox Amazon
amazon
Just let me know, please!!!
How can I get my hands on this stuff please comment back thank you very much I'll be waiting for your comment
Where can I get this product
What is the definition of a "long time" in this particular application
Donde lo puedo comprar
add "LONG LASTING" and i am sold
WTF does this MEAN? I see the same question asked time and time again here yet not a SINGLE answer!!!
It doesn't last long!
Del,
People have said 2 weeks max
How long should you let it stay on before you remove it ?
How long does it last? Till the next time you wash it? cooking oil can do that.
Lasts long enough to cash your check or credit his account.
Use 303 Aerospace protectorant.
Wipe New sucks - does this stuff actually work? how long does int last$ Has anyone tried Showroom New? my 2005 Element needs help!
Sold!!!
"there's product out there, but it doesn't work". Ya, thats this product. Don't waste your time or money, it will be gone after a few washes.
drumm3r66 not true
how long does the product last between applications?
Seems NO ONE can ANSWER this question OR they don't want to for some reason!!
Sounds like a scam
@@DMR_SR. I've never found anything at last more than 15 to 20 days
I cannot find this product
Best way to do it is to paint the plastic!!
Anybody else get recommended this after watching a ton of Red Letter Media?
well I just ordered mine. I got a 07 Avalanche. Well I'll see in a fee days what's it all about!!
Did it work?
Yes it's the real deal. I done my 07 Avalanche side step and everything else and still have a have bottle left.
where did you order it
Travis Johnson how long did it last before you reapplied?
Sold
Water test with some degreaser bro is missing in this clip..
Wipe new owns this stuffs life.
Well it worked for me on my expedition. Looked like this video for over a year.
+KiLLuminati bro you have to wash the shit out of the plastics. like I power washed them then cleaned them with carwash soap. it was a bitch. but in the end it did what it said. wipe new worked so good on your headlights cause you sanded hints cleaned them to death. but yea it works. worked bad ass for me.
+KiLLuminati maybe it was. man good luck. I keep that shit in my garage. I will tell you it did not work as well on my brothers f150. but it worked still. just no as well.
KiLLuminati n
Travis Johnson....how long did it last?
it's been on now for 3 weeks or more still looks good. it's definitely better than any of them other products I've used. it's been washed twice and still looks good!
I have a 2005 avalanche and when I bought it the cladding was all faded. I thought about using armor all but everyone knows that you will just have to repeat that all the time or it won't stay looking good and even with that it continues to fade. I went to Home Depot and bought like 8 cans of Krylon Fusion. It is Black Spray paint made just for plastic. All you have to do is prep the plastic by cleaning it off with soapy water, then clean with Alcohol and then spray the panels. It has been 4 years and the panels still look great. My avalanche looks basically brand new. I am extremely skeptical that this stuff will last longer than that.
Thanks for the advice Zach, I just bought an 04 Avalanche 2500 and I was wondering how best to restore the plastic cladding. I will give the Krylon fusion paint a try.
Zach Choate which krylon fusion black did you use? Flat? Satin? Or which black?
Gabriel Gonzalez I used the satin black. Krylon will last way longer than this stuff. Good luck.
Where can i find the product???
Raul Guerrero amazon
I have an avalanche and all the trim looked almost white it was so faded none of this shit works but I used the heat gun method and all my trim looks brand new only cost me $14 for a heat gun from harbor freight and about an hour and half to do whole truck
what is the heat gun method? I recently purchased a 2002 Subaru Forester. The paint looks great, but the plastic trim is super faded.
I have seen the heat gun method on CZcams. How does it look now?
Heat gun works for a few months but it won't last and gets harder everytime until the plastic is ruined
I use the heat gun as well on my avalanche . I then spray it with hi gloss heat resistant spray from Rust-Oleum. It's been a good three years since I have had to use the heat gun again. Now it is winter. So I will not do a touch up again till spring
where do I order it
luckslivecam amazon
How long does it last?
You would be doing well if it lasted 2 weeks, if you are selling the car this a quick fix method to smarten it up a bit, but this stuff is expensive the cheapo is just as good or use margarine. Best method is to heat the plastic with a heat gun the type used for stripping paint but great care needs to be taken not to melt the plastic. Good video but it's all bollox.
VanBooter
Thanks Buddy for the info, I truly appreciate the tip, I am so glad I can learn a lot via CZcams and the comments section, again, very grateful :) Take good care.
VanBooter Have you used this stuff?
mygtxful This particular stuff no, but that doesn't mean I'm wrong, if money is no object go ahead and try it, it's only a polish so other than your bank balance you can't damage anything.
The stuff didn't work for me,I have a 04 Ford f150 4x4 that although it helped some I in NO way got the results you guys say you got
Hehe! you tell me that the guy rides the pickup truck since 2003 and DOESN'T HAVE LICENSE PLATES?
Which truck? First truck has California plates
they take plates off for the safely of the owner
Lol plus he said he had it since 02 but its an 03
@@renownedfear187 hey genius you ever buy a new car? you can get a 2020 in late 2019.
I bought it. Used it. 2 weeks later it washed off. I did everything properly.... Waste of money.
Looks like shoe polish prob washes off after awhile
Yup
Work really? i have an old atv with burn plastic it still coloured but not new 1992 lol
Try olive oil! works really good! weird as it sound..
algot2009 how long does it last
Dan TheMan • Depends on how much it rains and what time of year... Heat guns on plastic help bring the oils back to the surface and should finish with a restorer like this.
@@mrficks1838 NEVER PUT HEAT TO PLASTIC!!!!! UNLESS YOU WANT TO RUIN IT
HOU LONG IT LAST ..
Just use trim paint......
$15 dollar solution that lasts 1 can high gloss black laquar.
I saw an older black guy in Walmart the other day and I thought about it ran to my car and grabbed my kit of "Back To Black" rubbed it on him and WALAH! he looked 40 years younger!
Dumb ass
Well s*** if it worked on him it should work on your ugly ass you probably look better being black 😂😂😂
Watch you get jumped for being racist
Man I laughed but some people will roast you for a racist joke
itll just wash off after a few car washes
Funny just watched a £5 bottle of turtle wax beat this in a test this stuff is £40 a bottle , maybe it's the music that makes it sound good
Peanut butter works better and lasts longer and it’s only $2.99
only true good product for plastics is Refinish Restorer and even that needs to be reapplied down the road
who is this guy? where is the REAL Rich Evans!?!!?
Heat gun works better
Uhhh... I lost count to how many manufactures make the same thing... years ago.
Just use a heat gun stop buying into these bandaids
John Davis heat guns just bring residual oils in the plastic to the surface for a temporary fix not to mention it causes the plastic to become weak brittle and crack
Nothing is quick and easy on plastic. Do the prep work, paint and clear coat them. Long lasting, at least compared to these oil based products, just get sum oil for cheap and short lasting. U want nice, professional results then do the prep work no matter how u go about it. The more prep work involved, is gonna give u results and the happier u will be especially on plastic.
Yessir, that's the only way to keep them black.
What paint you suggest?? If you're doing it at home, would spray paint in the can for cars work??
just another product that lasts a few weeks at best
Just use baby oil same shit
mark epperson I use Ballistol on mine for best protection. It was invented for the German army to protect the pistols and rifles wood metal and leather. It has many uses. Look up the history of Ballistol. I use it on my Tonneau cover and it works great. Wash the cover and let it dry. Squirt it on and use a cloth to spread it around. Darkens the cover if faded and shines it up. Amazon or EBay free shipping for about $17.00 for 14 oz can. Lasts a long time because it is thick. Don't buy the aerosol get the regular can which is the thick oil.
try peanut butter
hey! you are not THE Rich Evans.
Dond bay 1 car wash dont wash your monny
Bullshit. You need to heavily clean the trim before applying solution finish, it absolutely does not work like that. Even Chris West, the founder, shows prepping in his video.
It's bullcrap that auto manf. put this crappy plastic on cars anyway! My 97 Acura has the original plastic kick panels on the sides and they still look brand new and car is not garaged. NEW!!!!!!!! BMW and LEXUS and others can't say that.
Fake Rich Evans! Shame!