Trailer Troubles!
Vložit
- čas přidán 6. 07. 2024
- I'm on "vacation", which means I get to work on old rusty stuff in a different part of the country. I need a trailer to get stuff done, so I grabbed one out of Grandpa's backyard. That didn't work out, so I grabbed another. Then my boat trailer started falling apart, so I had to fix a third trailer. Of course my boat had issues also, but that's a video for a different time...
- Auta a dopravní prostředky
You do stuff like me. Don’t know if that’s a compliment or not.
I would be worried.LOL😃😀😎🇺🇸
Hahahahah same.
I say: This time it's not.
Best regards, luck and health in particular.
I think if half of us are not scatterbrained we have every right to be!
Who knew that forests are the natural habitat for trailers
Only pick your trailers when they are fully ripe.
@@matthewb8229 I'd say these might have ripened for a bit too long.
...and those trailers nest so close to the logging trails.
We sure love your longer videos!... anybody else agree?
I can't believe I caught a video fresh off the presses. I absolutely love this channel
Going tooo upscale with fresh grease and bearing's
The way you handled that trailer tail light assembly was pure genius!!
Always a great day when a low buck garage video drops
Great content, off the cuff dry humour, brilliant.
I think people forget when they make a trailer from an old pick up bed, that the rear end in there still needs to be serviced, at least every few decades depending on how much use it gets. A friend had an old trailer like this and was hauling a load of donated food for the church food pantry 20 miles back to the church when on an uphill grade with a 2 foot shoulder he lost the entire passenger side axel wheel and all, right over the cliff. I went down, we loaded to food into my truck, hooked a chain on the trailer and dragged it a few hundred feet to wide spot and left it. I'm pretty sure he took the plates and never went back LOL It's always a fun time at Dad's jungle hide-away, what will emerge from the undergrowth next?????
Heck, you can start your own trailer rental business there now! Lol 🤣
I love watching you and seeing how resourceful you are! I have a 1973 Dodge Sportsman class C camper van that I would happily sell to you for $5.00. But you have to come to southeast Iowa with a way to haul it home. I would love to watch you get it all working again💖
I really enjoy you letting me hang out during your projects, thanks!
Trails in the woods are super common where I live but I never found a single hidden trailer there 😉
lol he stands across the property looks good from here 😅
Yea the 50-50 view
50 feet away
50 mph
Looks great
woohoo! I like the part where he walked up to the trailer and said "It's trailering time!"
Watched probably all your videos this weekend , I hid in my shop with the ac , catching up on inside projects
I helped a friend turn a 1966 pickup with a bad motor into a trailer. It looked a lot like this, but ours was a long box.
“Hexagon spacers”… love this channel 👍
Looking forward to the next installment of the trailer saga! You're the man, James! 😊
"So I'm done here" when working on the trail light had me laughing out loud so hard. Thank you
I Live Vicariously Through You
Bicariously is a strong statement 👍👍
Only videos I watch more than once. I learn a lot too.
Always an adventure. Thank Low Buck
Uncle Jed and Granny would be proud to have you as an adopted cousin.
Huge fan of this channel, your gentle optimism is so lovely, starting my first project car soon and I'll take your mantra with me to the garage evert day :D love from the UK!!
Always a good day when Low Buck Garage releases a video. Thank you!
Fearless in your approach to any problem, I love it!
Outstanding and awesome content as always.Thanks for sharing and taking us along
I learn Island.
Something every time I watch your videos
The pickup box is mid 60's. At least you're having fun.
I'm glad this was a full video and not just a trailer..
I like what you did there.
You're guaranteed to learn something whenever watching one of these video's,😉👍, awesome video, and thanks for sharing.
love the built-in drainage holes in the trailer bed
you are a 5 out of 5 brother.. Blessings and Shalom over you and your family? We Love You Matt.
I am a huge Low-Buck Garage fan. I learn so much from watching you. Keep these great videos coming please! Thank you from Upstate New York.
Pickup truck trailers are rare. In the rustbelt its usually the first thing to go out on a truck, not the last thing to survive :)
Like the professional paint jobs on this channel :)
No such thing as too many trailers. It just makes life more versatile
Always excited to see your videos. So much fun! Thank you.
2:37 A high-school tech assistant used to be a major fan of vernier calipers, to the point of convincing me to pick those up to replace my plastic digital one.
A choice I do not regret making, though since I lost my good one, the one of the same brand I replaced it with having a bind spot halfway down the range.
The accuracy is about on-par with the electronic ones, but they always work and not having the hassle of the constantly draining weird button cell battery is nice.
My leisure routine is to wait for James' next video. This was great as always, the taillight part was as Magaiver as it could have been
Very enjoyable video! You do great work!
I like the orange atv you were filling with the dirt from the forage find trailer 😂
Always love this channel, I never know what I'll see
This guys finding trailers in the wilderness like he’s playing Pokémon Go.
Used your adjustable wrench and other wrench trick because I didn't have a metric. Worked great. Thanks for the tip!
I've had a similar thing happen to me buying an oil filter from Walmart. Bought the filter then realized that someone opened the filter box and swapped a different sized filter. Now I open the boxes and check the filter
I have serious trailer envy. Great video as always!
One & a half videos in one! Not baad. That's like more ice cream or one & a half donuts instead of the standard helping! I hope part two is that good.
You're sure a handyman! 👍
I love this stuff. If I could support my life doing it, I totally would.
Yeah, I've been wondering how he makes a living to have time to do all this and have a family. 115k subscribers does not seem like enough to live off YT. I work full time and barely have enough time to do an oil change these days.
That trailer with the crane is awesome. I'm working on one right now from a scrap trailer and an old crane. If you cant find bearings just swap out the axel with one you can get bearings for.
Nice job on the repairs James 🙂👍
I live where we use winter tires, so I always buy a set of rims to go with my tires to avoid paying that mounting fee. I also rarely buy used tires unless they're already on rims that fit for the same reason. It also lets me downsize the rim and upsize the tire, since it's only the outer diameter that has to match stock (as long as it clears the brakes).
I don't dispose of tires. They're good land management tools. Fill them up with concrete and X pattern them, then drill and clip a stainless steel mesh over it and it's perfect for throwing turf over and then putting trees to grow between the holes. In particular, sterile paulownia trees. They grow fast, with powerful roots. The local land management in my brother's area didn't have the money to do the work, back in the early 90's, that would've been several million dollars. We fixed it with this method and cleared the local area of discarded tires dating back to just after WW2. Today's probably one of the least flood affected areas in the zone, plus - the paulownia trees smell good.
Great video, as usual! However, would probably had tried to remove that pinion gear all together from that axle, reducing rolling resistance in the process. 🙂
needs a trailer...happens to find an old trailer in the woods. Mmmm....
just love your videos, always cheer me up. cant wait for next in line vids.
That is an early 60s bed. I have a 64 long bed and that is a nice looking short bed. Love the channel .
Excellent video James :) yes find nice finds especially old Ford box got fixing up also would put metal big sheet floor and weld up in place! Also wonderfull finders keepers and did superb!!
I just did this with an old trailer so you're a little late!
Mine was easier because it mainly involved just the paint part!
I do now have two "working" trailers so not that far behind!😂
Love the videos Buck they are awesome, hope to see some more of the Franken half-track in the future.
I like how you work with what you got. its like how it was when we where growing up as kids we had to make parts scavenge parts to fix are bikes gokarts and mini bikes . Now people don't fix things they buy new
I always enjoy and look forward yo your videos!
"Move to Beverly" lol.
If you needed a reserve battery bank for camping, that pickup bed trailer would be the ticket to carry it. And that unused universal joint connection on that differential would be a nice drive point for an alternator or generator to charge that battery bank while driving.
I'm jonesing for an update on trailers and Connecticut living. Enjoy your summer.
Definitely a 40 ft beauty 😂
Today you really delivered a low low buck project 😄
Excellent another 'enchanted scrap forest' video... Of course, after only 21 mins, I now need to go back in time and watch a few earlier forest adventures to get my fill for the night.
Having lots of fun. Thanks
Looking forward to seeing that tractor in a vid, little thing looked neat.
That truck beds in surprisingly good shape for being 60 years old. I can't help but think that somewhere out there in CZcams land there's a guy with a 65 Ford short bed that wishes he had that thing.
Yeah! Definitely my favourite channel 👍 The dry humour and mild sarcasm makes me think you've got alot of British in you 😂😂😂😂😂😂😂😂😂😂 . Keep doing what you're doing 😊
I am from india.
Do use the dremell tool with diamond tips for removing corroded bolts, and bad tings on outboards. They will be grinding away.
Impeller is fine, if it's many arms are touching the sides, and thermostat must be left in vinegar and spices overnight, to clean it. Do be checking the gearbox for milkshake oil!
I am from India.
Had a 1965 Ford pickup. That bed is that vintage. Nice shape
I had a workmate that would absent mindedly loose his tools and he would always say "Some people have tools and some people have skill".😉
Another enjoyable video! Thank you!
Nice job sir cool trailer Nice show 👏👏👏👍👍👍
At homd in bed. Had knee replacement surgery. Not feeling to great then i spied out a video from LBG. Feeling better already
i saw the thumbnail and thought.."it must be a low-buck-garage video for sure"..i was neither wrong or disappointed
Great video!!. I think the whole mangled nut cutting (and maybe still have fingers after) part would've the job for a hacksaw 😂
You always manage to keep me riveted with processes that I would find extremely tedious under most circumstances.
Great projects
living in new england has a lot more negatives than you think! lol
The laws, prices, and road salt are bad enough in Pennsyltucky. I can't imagine living in NE.
I got a fine for driving a Miata with a tiny trailer on a road labeled "passenger vehicles only" in CT.
I got lost in military land with death warning signs and no phone signal for GPS trying to avoid another "passenger vehicles only" road in NY.
The people around Lime Rock Park have limited the track hours and days.
We had an update from Robot Cantina and LBC in the same day. What a wonderful Sunday!
You got a boat motor on it so it can temporarily serve as a boat like a cyber truck. 😂
One man's trash is another man's trailer :)
That is a 1964-1966 Ford pickup short bed. Good find.
You do so much great stuff
Altijd goede video’s, thanks 👍🇳🇱
Looks like you're still having fun!
You are my cool uncle I have never had in my life. In Poland we don't have so much "rusty old cool machines and vintage rusty cars" culture. Anything "rat-style" is less common than Lamborghini.
My newest floor Jack is a Die-Hard. I like it!
To be continued Are not fun LMAO keep on rockin brother I love your videos you have such a great sense of humor
You have the patience of Job,..😊
Boat trailer just needs some scrap pieces of structural rebar welded to it, good as new.
It all seems so much safer than the steam cleaner from hell.
Why replace the pinion seal?
Toss the pinion & plug the hole.
exactly! 😄
Mid to early 60's on that for bed buddy ! Dad had a 64 ford PU that the bed look just like that one .
That forest is full of treasures...
Like always great content!
Vice boost is genuenly genious