HOW DO WE REMOVE CERAMIC COATINGS? The mother of all chemical resistance tests!!
Vložit
- čas přidán 15. 01. 2021
- HOW DO WE REMOVE CERAMIC COATINGS? The mother of all chemical resistance tests! In this video, I demonstrate how to remove a ceramic coating from a car. Ceramic coatings are multi-year semi-permanent paint protectants and typically resist chemicals in a wide pH range, usually pH 3 to 12. They are the most durable form of paint protection, so what do you do if you want to remove them from your paint? Can a simple stripping soap do the trick? Can alkaline or acid based cleaners do the job? The results might SHOCK YOU!
▶️ SUBSCRIBE and LIKE today’s video & Turn On Notifications for New Videos - bit.ly/PanTheOrganizer
⬇️🔶 LINKS TO PRODUCTS MENTIONED IN THIS VIDEO ⬇️⬇️
🇺🇸 For people in USA:
CarPro Reset (shampoo): bit.ly/35uGftB
Adam’s Strip Wash (stripping soap): amzn.to/3mhToMA
CarPro Bug-Out (bug remover): bit.ly/36DKDFI
CarPro TarX (tar remover): bit.ly/37amcA1
CarPro IronX (iron remover): bit.ly/3mcPN2e
CarPro Spotless (water spot remover): amzn.to/3o0pywf
Super Clean (cleaner-degreaser): amzn.to/2JfgDYP
Gyeon Prep (IPA): amzn.to/3mofr3S
Citrol 266 (cleaner-degreaser): amzn.to/3KMbZgI
Meguiar’s Wheel Brightener (acid based wheel cleaner): bit.ly/2KvaEQB
Microfiber towels: bit.ly/2HFO8Dc
Microfiber wash mitt: bit.ly/3kzCpmV
EGO 580 CFM blower: amzn.to/32GBL0Q
✅ Polishes and pads that I recommend to remove ceramic coatings:
Buff and Shine Uro Fiber pad: bit.ly/3oWs335
3D One compound/polish: amzn.to/2Wg8ab8
Sonax Perfect Finish: bit.ly/3nILmg3
Rupes LHR15 MKIII polisher: bit.ly/3kEskFB
Rupes yellow foam pad: bit.ly/36ATE2g
🇨🇦 For people in Canada:
CarPro Reset (shampoo): bit.ly/2Uxq6Nn
Adam’s Strip Wash (stripping soap): bit.ly/3lbFv0P
CarPro Bug-Out (bug remover): bit.ly/3psBRD9
CarPro TarX (tar remover): bit.ly/3fEHeKV
CarPro IronX (iron remover): bit.ly/2V60BmX
CarPro Spotless (water spot remover): bit.ly/3fFCtAR
Gyeon Prep (IPA): bit.ly/3l8yHRD
Citrol 266 (cleaner-degreaser): bit.ly/3Rww5xO
Meguiar’s Wheel Brightener (acid based wheel cleaner): bit.ly/2M6So0w
Microfiber towels: amzn.to/37bNFkP
Microfiber wash mitt: bit.ly/35uLpWs
EGO 580 CFM blower: amzn.to/32JAPsL
✅ Polishes and pads I recommend to remove ceramic coatings:
Buff and Shine Uro Fiber pad: bit.ly/37XhupC
3D One compound/polish: bit.ly/2WtdqZf
Sonax Perfect Finish: bit.ly/38ReugS
Rupes LHR15 MKIII polisher: bit.ly/2IM1gXQ
Rupes yellow foam pad: bit.ly/3nzi96O
DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission on a purchase without additional cost to you. If you do purchase through my affiliate links, thank you so much for your support!
Welcome to Pan TheOrganizer, one of the biggest car detailing channels on CZcams, here to help you with fun and entertaining tutorials, tips, tricks, products and equipment reviews!
👍🏼 Click the like button if you enjoyed the video and share it with your friends and family. Don’t forget to SUBSCRIBE to my channel and activate the notifications (the bell icon) if you want to be notified every time I upload a new video. Welcome to the Pan TheOrganizer family!!
👕 My merchandise store (T-Shirts, hoodies, sweatshirts, and more!): teespring.com/stores/pantheor...
🎥 List of equipment I use to produce my CZcams videos: • BEST CZcams CAMERA & ...
📲 Follow Pan TheOrganizer:
Instagram: / pantheorganizer
Facebook: / pantheorganizer
Twitter: / pantheorganizer
🌐 Visit my official website: pantheorganizer.com
🎶 Intro music by Hurley Mower
/ hurleymower
#ceramiccoating #paintprotection #removal #detailing #cardetailing #cleaning #pantheorganizer #detailingtutorials #autodetailing - Auta a dopravní prostředky
⬇️🔶 LINKS TO PRODUCTS MENTIONED IN THIS VIDEO ⬇️⬇️
🇺🇸 For people in USA:
CarPro Reset (shampoo): bit.ly/35uGftB
Adam’s Strip Wash (stripping soap): amzn.to/3mhToMA
CarPro Bug-Out (bug remover): bit.ly/36DKDFI
CarPro TarX (tar remover): bit.ly/37amcA1
CarPro IronX (iron remover): bit.ly/3mcPN2e
CarPro Spotless (water spot remover): amzn.to/3o0pywf
Super Clean (cleaner-degreaser): amzn.to/2JfgDYP
Gyeon Prep (IPA): amzn.to/3mofr3S
Citrol 266 (cleaner-degreaser): amzn.to/3KMbZgI
Meguiar’s Wheel Brightener (acid based wheel cleaner): bit.ly/2KvaEQB
Microfiber towels: bit.ly/2HFO8Dc
Microfiber wash mitt: bit.ly/3kzCpmV
EGO 580 CFM blower: amzn.to/32GBL0Q
✅ Polishes and pads that I recommend to remove ceramic coatings:
Buff and Shine Uro Fiber pad: bit.ly/3oWs335
3D One compound/polish: amzn.to/2Wg8ab8
Sonax Perfect Finish: bit.ly/3nILmg3
Rupes LHR15 MKIII polisher: bit.ly/3kEskFB
Rupes yellow foam pad: bit.ly/36ATE2g
🇨🇦 For people in Canada:
CarPro Reset (shampoo): bit.ly/2Uxq6Nn
Adam’s Strip Wash (stripping soap): bit.ly/3lbFv0P
CarPro Bug-Out (bug remover): bit.ly/3psBRD9
CarPro TarX (tar remover): bit.ly/3fEHeKV
CarPro IronX (iron remover): bit.ly/2V60BmX
CarPro Spotless (water spot remover): bit.ly/3fFCtAR
Gyeon Prep (IPA): bit.ly/3l8yHRD
Citrol 266 (cleaner-degreaser): bit.ly/3Rww5xO
Meguiar’s Wheel Brightener (acid based wheel cleaner): bit.ly/2M6So0w
Microfiber towels: amzn.to/37bNFkP
Microfiber wash mitt: bit.ly/35uLpWs
EGO 580 CFM blower: amzn.to/32JAPsL
✅ Polishes and pads I recommend to remove ceramic coatings:
Buff and Shine Uro Fiber pad: bit.ly/37XhupC
3D One compound/polish: bit.ly/2WtdqZf
Sonax Perfect Finish: bit.ly/38ReugS
Rupes LHR15 MKIII polisher: bit.ly/2IM1gXQ
Rupes yellow foam pad: bit.ly/3nzi96O
It is just a wierd one. If I had your Gmail I would upload a pic.
Mi l0 m
Holy cow! I've been waiting for a new video this entire week but I didn't see this one coming😱 Pan, I gotta tell you this was one serious torture test, I have never seen anyone do this kind of test on CZcams! Awesome entertainment, see you on the next one👋🏻
Thanks Konsta!
Other CZcams detailers: So today we'll be doing some torture tests on a test panel
Pan's BMW: a WHAT
Ahahahahah!!!! Good one Alvin!
Finally, since when have I been waiting for such a subject approached by you ... Now I sit down and relax, after washing my car after a 2500km road!
Wonderful!
I have been checking all week for a new video from you my friend 😂. Sorry this IS my favorite detail channel. Hi from North Carolina, 🇺🇸
🙏🏻👍🏻
Thanks Pan for giving an actual clear answer to the question! A lot of detailers leave us with more questions than answers in the end of their videos. If you can answer me question I will really appreciate it. Does an old wax that has remained on the car for 3-4 months needs to be removed with some process before you apply a new wax? They say that when you apply a second coat of wax you also remove the old one, so my understanding is I can wax my car every month if I wanted without using any process like special shampoos that claim this result. I also was very proud when I found out that you are Greek!
For waxes you don’t have to remove the previous coat. You just layer.
If you want to remove the old wax, there are what is called strip washes which help break down those waxes and sealants, they wouldn't do anything on this paint, and then when your rinsing car, keep an eye what it looked like when you did your pre rinse and see what it looks like after you strip wash to guage where your at. Also, you need to use only the strip wash because a lot of washes now have some sort of protection built into them, so if your looking to remove the old wax remember you dont wanna add new wax, even goes for clay bar, if your using a detail spray (which all clay lubes are basically a detail spray, you can do this on the cheap with many products, you might wanna re wash the vehicle again with the strip wash and be certain none of the detail spray adhered to the paint.
Great video my friend, definitely a testament to the coating on how well it held up.
Thanks!
@@PanTheOrganizer Would you still reapply the opticoat pro+ or go with a different ceramic coating?
Thank you Pan! I have always wondered how long the coatings would last and what they could repel. A few of my cars have had professional ceramic coatings applied and lost some of the hydrophobic properties overtime, so I though the coating was gone. I am pretty sure it was due to my bad maintenance wash habits and not the coatings. those bad wash habits have no changed due to your videos! Thank you!
Glad to help! And you are right. A good maintenance regimen is key. At least once every two or three months, once should do a good wash, possibly use a tar and iron remover, and finish with a coat of silica spray sealant to replenish the coating and ensure maximum durability and keep its properties top notch.
Good afternoon, Pan. Excellent video! Some conclusions that can be made based on the experiment: 1) The ceramic coating is resistant to several automotive cleaning products; 2) The "Carpro" products that were tested proved to be safe on surfaces with ceramic coating; 3) The water repellent properties improve with a ferrous, organic washing and decontamination process and removal of acid rain stains or water stains; 4) Compounds with a more acidic or alkaline pH can interfere with the water repellency of the ceramic coating. It is suggested that other methods are necessary to remove the ceramic coating, in this case, mechanical processes. Thank you very much for the video, Pan. It was very brave to test the products on this beautiful BMW!
Thanks Waston! And it shows that you listen. Your conclusions are all correct. 👍🏻
Cut to the Chase~! Buff it off~! lol~!! video shows how resistant ceramic coating can be~! if you want to remove, you decon first then Attack it with polisher~!
Thank you. This was painful when you’re just looking for a solution to remove the shit.
Lol exactly. This is way too much drama.
Yeah I would of just buffed it. It gives off a weird sweet smell as it’s getting burned off
Such a slog just to hear something I already knew. Unfortunate
What if you have matte PPF??
I think most people know you just polish it off for paint, but I actually found this is good video for textured trim, matte paint, and protection films.
This was helpful to for me cause I needed to remove a messed up coating on exterior trim on a Jeep.
Great video Pan! I would like to see a tutorial on removing ceramic spray wax and/or coating using the polisher.
Great suggestion!
@@PanTheOrganizer did you end up making this video?
Great video Pan. I would not have thought that the ceramic coating could have withstood such abuse. Makes for a great selling point for people in future thinking about applying it to their cars. For professional detailers like many of us it makes for a much easier sell. Thanks!!
Thanks Frank! :)
Great video Pantelis. I have subscribed to several car care channels. But no is like yours. You explain everything and show us in every detail what and how we can achieve something. You have answers for everything and that makes your channel unique throughout CZcams. Thank you very much
Glad you think so!
Hi Pan, great conclusion. With mechanical action...how do you know when to stop polishing before damaging the original outter paint layer ?
Do a test panel and do a little at a time. You are trying to save your clear coat.
Great video Pan! I do have a question though, do you think that leaving the products sitting on the paint longer, that it would have accelerated the breakdown?
Thanks Paul! A longer dwell time has no effect on a coating like Opti-Coat Pro+ so it doesn't change anything.
Hey Pan. Trust you are doing good. Every time I am always very enthusiastic to see your videos and much satisfied after watching. I started detailing my Skoda rapid car and really enjoying. Thank you very much for sharing your experience and much appreciated.
Thank you so much 😀 What's your favourite video on my channel so far Arun?
Thanks Pan for a great video! This spring I will be coating my husband's Tacoma with Avalon King. I bought a DA polisher a couple months ago and I'm practicing paint correction on some fenders in my basement 🙂.
Sounds great!
Pan, thank you. What do you recommend as compound remover product then in order to remove old ceramic coating?
Pretty much any quality compound or polish will do. I have highlighted my favourites in this popular video: czcams.com/video/2JDvQBs1viM/video.html
Great video Pan, the only suggestion I have is to clarify the difference between “PRO GRADE” vs “PROSUMER GRADE” coatings and how to remove them because most pro grades like crystal serum ultra, opticoat etc need to be wet sanded since polishing will not completely remove them with polishing alone like it will on a prosumer grade product.
Great point! Well said.
@@PanTheOrganizer Pan, I put turtle wax hybrid ceramic spray On my hood ,new truck But didn't Decontaminate first because I didn't know better..... How can I remove the Ceramic spray wax so that I can do things properly.
thank you again.
Thanks for your work! Great video. Keep it up
Thanks, will do! What's your favourite video on my channel so far Eddy?
Another great one. Thanks, Pan!
Thank you kindly! 🙏🏻
0:11 “who do you remove a ceramic coating?”.. hahaha how did u miss that one Pan!
Hahaha the beauty of filming and editing. I rarely make mistakes, but in the end, I am still human haha. I hope you enjoyed the video!
Très bonne vidéo Pan j’adore voir ces test de résistance super encore bravo Pan et impatient de voir la prochaine vidéo samedi ✌🏼🙌🏼😁
Merci Bob!
G'day Pan, I have now caught up with your videos. I'm glad it was your car and not mine that you did this chemical test on, as we both have the same ceramic coating (2 years old as well in Feb). The first few chemical tests was basically doing a chemical decontamination which was why the coating came back to its original form. Nice to know the coating can withstand a beating of chemicals, knowing this would not happen in reality.
I finally got to chemically decontaminate my car and I used the Optimum Power Clean tip you mentioned before foaming the car, worked a treat. The decontamination brought back the hydrophobic properties like new, as did yours. I finished it with Turtle Wax Seal & Shine(new formula) as a topper. Compliments keep coming from neighbors. Thoroughly enjoyed the torture test. Ozz
Thanks Ozz! Did you see my one year Opti-Coat Pro+ update video where I followed the yearly maintenance recommendations from Dr Ghodoussi (owner and chemist of Opti-Coat) And ex Vice President of Optimum Yvan Lacroix? Here: czcams.com/video/ud4wGakuSWs/video.html
Forensic Detailing Channel did a video on this which proved to a lot of guys of what all does NOT remove it.
These ceramic coatings just blow me away... crazy durability.
Yup!
I completely and rather easily removed my 2.5+ year old CarPro CQuartUK coating with a clay mitt and P&S Wheel cleaner and went back to sealants and it came out great. Thanks for another great video, cheers.
Thanks!
You said a long time ago that the only way to remove a ceramic coating was to polish it away and I remembered that coming into the video. Thanks for your work.
It shows that you listen to my videos! That's good. :)
Take a shot everytime Pan says ''tight'' or ''fantastic''
You would be in an alcohol induced coma! Ahahah
in the hospital with alcohol poisoning, i guess i lost to Pan
🤣🤣🤣
I’m dead
I have never been drunk so fast 😂😂
Holy God!!! I m not courageous like u pan, I can't put my car to this Mayhem. Great video , for knowledge 👍❤️
Thanks for watching. What car are you currently driving?
Awesome video as always. When you showed that update video I couldn’t believe! Crazy!
Thanks for the kind words!
As always, Pan, great video and education. Yes, I just purchased a 2021 BMW M330i, and after the proper prep work I applied the following coating. Two coats of Artdeshine Metal Oxide Coating, followed by two coats of Tacksystem Top Coat. Time will tell. Have a great weekend.
Thanks for sharing
Totally surprised that the ceramic coating survived throughout all those tests. Another interesting and entertaining video! 👍🏼
Thanks! Yeah Opti-Coat Pro+ can resist chemicals in the entire pH range. pH 0-14. I have a video where we applied it here: czcams.com/video/C_hb8PMP3KA/video.html
It must be time to turn in that lease and get a new one?
I wasn't surprised by this result at all. I've heard that Pro Plus basically needs to be wet sanded to be removed fully.
Yeah I’m getting a brand new car this summer. Stay tuned, it will be awesome!
@@PanTheOrganizer looking forward to it!
😁
@@PanTheOrganizer usually people like us have no problem selling or trading in our vehicles, more often than not I get, "let me know if you ever want to sell it" from friends and neighbors.
@@PanTheOrganizer what are you going to put on the new car?
Awesome video!! I think I almost pass out when I saw you doing that test in your car!! You are very courageous Pan. Thanks for the amazing video
Thanks Eric! What’s your favourite video on my channel so far?
@@PanTheOrganizer the one with the Black M3 BMW Full detail. That was my go to video to learn. Still have on my library and used it as reference
🙏🏻👍🏻
Another great video Pan always like watching your channel.
Thanks Nathan! What’s your favourite video on my channel so far?
Pan. Can you comment on removing a ceramic coating that has been applied to paint protection film. My thanks.
Just remove the film
I did research and i will use gyeon ppf cleaner with white rupes polishing pad
How do you know if you did remove the ceramic coating with mechanical polishing and or wet sanding when the hydrophobic properties may be gone but the protection still there?
No consumer grade coating will survive polishing or wet sanding. A professional grade 5+ year coating might, but that’s it. I hand polished a spot on my hood a month after applying cquartz and it completely removed it in that spot. But to answer your question after you polish just use an IPA wipe down and if it’s super slick then there might be ‘some’ protection left but if it’s a little grippy then there’s nothing there. If you rinse that panel and see zero beading or sheeting that’s also another way to tell
Well said.
Really learned a lot. Thanks for this and other of your video's.
Thanks Jomar! What’s your favourite video on my channel so far?
Great video Pan. I’m impressed that you would do this test on your own car rather than a junk yard hood. Keep up the great work.
Thanks James!
Thanks Pan, yet again an outstanding informative video 👏 👏 👏
Thanks!
Great video pan. Thanks now I know how fully remove ceramic coating . Happy new Year to you buddy!
Same to you Jahdel!
After buying the graphene coating I was a little scared to think that you would be able to take the coating off with chemicals because that was the main reason for my buying it. Happy to find out my fears were unfounded. Great video as always
OMG!
I just got the notification for this newly uploaded video. I'm out shopping ATM.
Excited to reach back home, sit back, relax and watch the show 📺🍿😁
Hope you enjoy!
@@PanTheOrganizer loving it 🌟
I think these coatings are great! I only found one thing (by accident) that can damage a coating - wheel and tire cleaner (strong commercial grade). I inadvertently splashed some on my own coated vehicle and found it an hour later. There were dull spots on the finish that I couldn't remove chemically. I went to the compound and pad to remove the coating mechanically and re-applied. Thank you for the realistic demonstration :) I think dwell time is a big factor - longer dwell more reduction in coating function.
Dwell time has zero effect on coatings like Opti-Coat Pro+. Thanks for watching!
@@PanTheOrganizer would you say that is also the case for CQuartz UK 3.0 coming to dwell time?
I always wanted to know how to remove it from paint. They always talk about how durable it is, but never how to remove it when the time comes. Thanks a lot 😁
Btw, nice channel. I came from CZcams recommendations and now I’m subscribed
Thanks Rafael! Since you subscribed to my channel, let me officially welcome you to the Pan The Organizer family!
What’s your favourite video on my channel so far?
Toujours au top ! Merci Pan pour cette vidéo.
Merci!
WOW! Opti-Coat pro plus holding up amazing. So cool to see. Considering it for my next coating!
Watch the video where we applied it on my car: czcams.com/video/C_hb8PMP3KA/video.html
To my knowledge it's the most chemical resistance coating on the market handling ph 0-14. Compare this to Carpros ph 3 - 12
My Volvo do feel the feling of the ceramic coating i applyed,thanks for the video and a happy New year to you and the fam 👍👍
Same to you!
That was a great video! I just applied a Ceramic coating last weekend 7/17/21 and so far I love it. It is a Chemical Guys product called Carbon Force. It was very easy to apply, and seems to be forgiving for a "pro level" coating. You're right about the removal, it's really only an abrasive that is effective. I overlapped on a window by accident and didn't see it until it set up. I had to use a heavy cut medium on the glass to remove the smudge of Ceramic Coating. Thank you so much for taking the time to create these videos. I learn so much.
My pleasure Allen! Good to know that my viewers are taking care of their vehicles. More and more people now are ceramic coating their vehicles thanks to my videos and tutorials, so that's awesome!
@@PanTheOrganizer Would love to know what you think of the Chemical Guys product if you haven't already tested it. Cheers!
We did test it in a crazy battle video here: czcams.com/video/Fq_XeI28Vso/video.html
@@PanTheOrganizer Yes! Thank you so much!!
Super video encore une fois !
Great video, Pan! I have been wanting to remove my existing ceramic coating so I can apply my glassparency graphene coating, Pan The Organizer edition 🙂
👍🏻👍🏻😁
Love the video man and you got my support 👍🏼
I appreciate it!
Another great tips and tricks video from PTO.
Glad you enjoyed it
Hello Pan, good video, great info on ceramic coating removal. I agree using a polisher is way to go.
Another learning information about ceramic coatings... thanks for sharing 👍😎👍
Thanks!
Really awesome video Pan! Always love your passion. Not sure if those chemicals are harmful but just for safety maybe wear a mask next time when you have to spray a lot of them? I felt kind of worried when you had to spray them back to back lol.
I was not surprised at the result but I am more interested in what you are going to put on your car next! Thanks for the video!
I am getting a brand new car this summer, as I get a new car every three years. So stay tuned! It will be MEGA.
You are very good at presenting/demonstrating your point. Thanks for vid
I appreciate that!
Awesome vid Pan!!
I always figure if you want or need to remove a coating its probably time for a buff anyway 👍🏻
Thanks!
Great job Pan!!!
Thanks Bill!
Thank you!!
Πανό είσαι φοβερός as always!!!
My support. Nice Job !
Thanks!
Great video! Merci Pan pour toujours inventer de nouveaux thèmes de vidéos et toujours aussi intéressants!! Keep it up!!! Merci!!
Merci François! Toujours une surprise quand on regarde mes vidéos! ;)
@@PanTheOrganizer oui et toujours des bonnes surprises! Bonne année et plein de bonnes choses!
You certainly answered the question. Well done. Thx.
😁👍🏻
Super work. You help me alot to gain my knowledge in detailing
Thanks Roncalli! How did you discover my channel?
Great video! You’re a brave man subjecting such a beautiful vehicle to this test. I admit being nervous for the car! 😳
Thanks! 👍
Thanks for the very informative ceramic coating removal video! Looking forward to more vidz:)
More to come!
I used CarPro CQQuartz on 3 cars and AvalonKing on one as ceramic protection. Two products you have recommended. AvalonKing was cheaper because of your help. AvalonKing seems to me a little easier to apply , flashing time was a little quicker and buffing was very easy. I am very please with CQQuartz after 10 months. AvalonKing was apply just recently, so I am reserving my judment. Thank you for sound advices.
Thanks for sharing and thanks for the trust you place in my opinion Michel. :)
Hello from Germany….thanks for another great and informational video. You are a brave soul submitting your BMW to such harsh treatment but your video drove the learning point home. My Volvo XC40 was ceramic coated immediately after purchase in March 2019 and am totally satisfied. The application was performed by a local professional and came with a 5 year certified warranty. Ater viewing your video on the new Turtle Wax Hybrid Solutions Pro Graphene FEX Wax, i had my two bottles mailed over from the USA. While it’s currently too cold yet to apply TW Flex Wax, I plan to use it as a topping and general maintenance. Got the beer on ice awaitig your next video!!!
Thanks Mack!! What’s your favourite video on my channel so far?
@@PanTheOrganizer There are numerous ones that were excellent but if I had to select only one, then the "What's better - Wax, sealant or ceramic coating" video really stood out.
Dear Pan,
I followed every step that you did in the Avalon King video. Thank you so much for the recommendation and advice, everything worked out and my car looks extremely glossssy. Hats off to you man. I’m buying more to use on all my friends vehicles and maybe even my tractor😄.
That's good to hear Louis! You made a good choice. How did you discover my channel by the way?
@@PanTheOrganizer 100% CZcams algorithm
Bonjour Pan!! Great video again. But a true sign of how good your library of videos are? I knew the answer before I watched this video 😁😎
And I’m just a weekender who has seen all your videos. Thanks for all the knowledge and training!!! Merci!!!
That's awesome Steve! It shows that you pay attention. :)
Great video! I appreciate your dedication to detailing, risking your own car. I do have a couple of questions:
1. Would you reccomend "weaking" the coating with one or more of these chemicals, prior to polishing off with a DA?
2. The Carpro bug remover intrigued me with its cleaning abilities. Would you reccomend this as a possible step in reviving or deep cleaning a coated vehicle?
Thanks Jay! To answer your questions...
1) Not necessary. I would simply do a wash, iron remover, claybar, and start the polishing process.
2) To revive and deep cleaning a coated car, at least once every 6 months, you should wash the car, use a tar remover followed by an iron remover.
Watch my 1 year update video on my coated car: czcams.com/video/ud4wGakuSWs/video.html
You wouldn't do exact all those steps on coatings that aren't as chemical resistant, but you get the big picture.
I am almost positive I’ll never actually do this to our vehicles but I really just watched this fully enthralled the whole video. Very informative! Thank you!
Thank you Sabrina for the kind words! How did you discover my channel by the way?
Happy new year!
@@PanTheOrganizer Happy New Year to you too! I follow quite a few auto detailing channels, and this video popped up as recommended when I opened my app tonight and I’m not disappointed 😊
Sweet! You found one of the biggest and fastest growing detailing channels on CZcams as we’re approaching 600,000 subscribers and have surpassed 65 million views. I have been detailing cars for over 23 years now and I love sharing my passion and knowledge with my viewers.
You’ll have over 500 videos so far on my channel with new ones added at least once weekly, typically on Saturday mornings at 8am EST.
Tons of awesome content coming your way so stay tuned.
What country are you watching from? Cheers from Canada 🇨🇦!
@@PanTheOrganizer Yes, I definitely subscribed after this video 😊 I’m from the USA 🇺🇸 I look forward to your upcoming videos!
Well since you subscribed, let me officially welcome you to the Pan The Organizer family! :)
Pan i really liked this, and the fact that you did it on your own car i loved that.
You love what you doing.
I keep watching all what you do, keep it up like always you do.
Thanks Bayar! Happy new year!
How did you discover my channel?
@@PanTheOrganizer
Through the CZcams detailing videos,
And btw im a left handed too 😅
I start my business recently as a detailer
Hahah awesome! Good luck with your business! Hey, how did you discover my channel by the way? I hope you're enjoying the videos.
@@PanTheOrganizer thanks a lot!
I discovered it from CZcams it self.
I ride a new Can am RT Spyder and did a ceramic coating on it , I decide to wrap the front with a clear paint protection film so I needed to get the ceramic coating off and this video is just what I needed to watch to get it done ! Any suggestions on coating the windshiled that is made of Plexiglass for those of us that have cars but also have motorcycles ? Awesome video Pan !!
Great job pan!!!
Thanks Omar!
Thank you for this video!
Thanks Alan!
Great Video!
Thanks! How did you discover my channel?
Rien à dire...vidéo très intéressant comme d'habitude.
Tu viens de me donner le goût d'aller laver mon auto dans le garage en attendant que la tempête de neige finisse 😉
Keep up the good work!
Merci SB!
Great video. Very interesting. Thank you.
Thanks Shane!
Wow Pan! I would of been pretty worried to try that on my paint! I kind of figured mechanical was the way to go for full removal. I purchased that Avalon King I'm going to try that this spring as soon as it warms up here in Wisconsin.
You’re gonna like that coating Chad!
Great information pan.. why I liked the vid is it shows if I'm cleaning my tires and so wheel brightener gets on the paint, it won't strip the coating..thanks for the intel
Thanks Barry!
You are a brave man, I don't think I could have been brave enough to do it on my own car, thanks for the great video 👍👍👍👍
Thanks Eamon!
Très.,très pertinente vidéo qui répond à plusieurs de nos interrogations! Bravo!
Merci!
Great video 👍, thank you!
Thanks!
Big thanks for that test 👍👍
Thanks!
Best as always
Thanks
Thanks Tom!
Pan, you are absolutely amazing. Learning so much from you!
I appreciate that! How did you discover my channel by the way?
Welcome to my channel. You discovered one of the biggest car detailing channels on CZcams as we surpassed 940,000 subscribers and we have over 124 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers.
You found the right channel to help you learn everything about detailing.
@@PanTheOrganizer discovered it about a year ago through search. Was trying to learn how to polish my car :-) and about various materials and chemicals to treat my car better.
Great vid, Pan!!!!
Thanks Michael !! I appreciate it. It's always nice to see that my viewers appreciate the efforts I put into making these videos. :)
@@PanTheOrganizer sure thing! It was fun to watch and full of great information!
Hi Pan!!!. Holy Molly this is an excellent test of the strength of ceramic coating. But in my personal opinion everything is how much you take care of and maintain the ceramic coating. Great job friend Pan👍👍👍, greetings from Panama🇵🇦
Cheers from Canada Joaquin!
Pan is the man!
Thanks! 👍🏻
Nice Video Dude!!
Glad you enjoyed it
Good info. Thanks!
Thanks Melvin!
Big props to you sir! Going all out on your own vehicle! You are priceless, I appreciate you
Thanks! How did you discover my channel?
Welcome to my channel. You discovered one of the biggest car detailing channels on CZcams as we surpassed 850,000 subscribers and 106 million views! I have been detailing for 25 years and I love to share my knowledge and passion with my viewers.
You found the right channel to help you learn everything about detailing.
@@PanTheOrganizer just searching here on the tube for detail advise and products.
Followed your recommendation and tried Carpro CQuartz UK 3.0. Have coated 4 vehicles this month. Customers love it. Thanks for all the tips you offer. Looking forward to the new car.
Thanks Gabe!! Good choice of coating. :). What's your favourite video on my channel so far by the way?
@@PanTheOrganizer I enjoy all the videos. My favorite 2 are the How To Install A Ceramic Coating and your Products of The Year videos. Last year after your video I purchased P&S Non Acid Wheel Cleaner and love using it.
Thanks for the feedback! What country are you watching from? Cheers from Canada 🇨🇦!!
@@PanTheOrganizer The U.S. Kentucky
Sweet!
Great video.
Thanks!
Thank you for your service.
You bet! How did you discover my channel by the way?
Welcome to my channel. You discovered one of the biggest car detailing channels on CZcams as we surpassed 990,000 subscribers and we have over 135 million views! I have been detailing for 27 years and I love to share my knowledge and passion with my viewers.
You found the right channel to help you learn everything about detailing.
@@PanTheOrganizer haha, I've been a subscriber for a few years. You're a part of the my success as a part time gig of detailing cars. I have a full time job which I love, but I enjoy making things clean and shiny. I love the reaction on peoples' face when they get their vehicle back after I spend 4 hours detailing it. Also, my choice of ceramic coating based on price and performance is Avalon king.
Yes indeed the man with the plan let’s test on the ultimate driving Machine every day drive forget that test panel I like it