How to Fix a Cracked Pool Skimmer Yourself
Vložit
- čas přidán 25. 05. 2023
- Do you have a cracked pool skimmer? have you tried other patching methods with no success? Not feeling $5000 for a professional skimmer repair? No worries! In this video I will show you the easy step by step process to create a liquid ABS resin knows as Schmear to permanently patch a cracked pool skimmer. We will go over what products to use, what safety precautions to take, and the best practices for applying the resin. This is a straightforward repair that you can do yourself to breathe more life into your pool, and save thousands in the process!
Materials used in this video:
MEK (Methyl Ethyl Ketone) - www.canadiantire.ca/en/pdp/so...
ABS Resin (Airsoft Pellets - NOTE this must be 100% ABS, if they say biodegradable on the package, they are NOT 100% ABS) - www.canadiantire.ca/en/pdp/co...
Official Schmear Pellets (From Hayward) www.poolweb.com/products/schm...
If you found this video helpful, please consider subscribing for more great content! It helps out the channel big time!
#pool #poolrepair #skimmer #hayward #skimmerrepair #diy #fixed #repair #Schmear - Jak na to + styl
MEK is the primary ingredient of PVC cement which actually welds the PVC together by dissolving some of it. I’m not a chemist but mixing PVC cement with the ABS pellets may work as well. However, what ever is used a respirator is essential. MEK will get you higher than a kite.
Thanks for the comments, good luck on the project!
Thank you for your recommendation. Purchased all the necessary equipment and solutions and it worked incredibly, MEk from West Marine and ABS Non-biodegradable BB's. The breakdown process took approximately 15 minutes. Applied and allowed it to dry for 3 days just to ensure dryness. Pool is up and running, water level holding steady. Thank you.
Right on, glad it worked! Hope you get to enjoy the season!
Excellent video I followed this video and the very large crack I had in my skimmer is repaired beyond my expectations.
Love to hear that! Glad the video helped! Hope you have a great pool season!
As usual great video, very informative! Looking forward to more!
Thanks for the kind words!
Awesome video, thank you so much exactly what I was looking for!
Glad it could help!
Nice one! Excellent teaching - good demonstration. I have the same problem. Will give it a try - seems a much more affordable and easier than digging the whole thing up. Thanks.
Thanks so much for the kind words! Those were my sentiments exactly! I feel like this one is a superior repair to some of the other products out there based on how it chemically bonds the skimmer back together. Try separating PVC pipes after you have cemented them together... that's what I'm hoping for here!
Great video!The chemical safety piece was super helpful!
Thanks for the kind words! In my experience that piece typically goes overlooked in a lot of videos I see on CZcams.
Wow that was cool! thanks man
You are most welcome! Glad it helped!!
Awesome! Thank you!!
You are most welcome! Good luck with your repair!
Great video. I’m dealing with the same problem right now
Thanks for the kind words! I have faith because it's chemically "welded" that this fix will last!
Thanks great video !
Thanks for the kind words!
Great video
Thanks for the kind words! Hope it helps!
What is the working time once it's mixed, before it starts hardening or thickening? Can you add more MEK to thin it out if it starts thickening too quickly? Once the repair is complete how long does it take to fully cure? Thanks for doing this, it looks like it will be very helpful!
Hey there! You can play with the viscosity by adding either MEK or more pellets. I aimed for a white glue like consistency. If I recall correctly I had about a 10 min or so working time with it and I gave it over a day to cure to be safe. It was rock hard once I was done and it has held up well so far! Hope that helps!
great video - your camera was really helpful
Thanks! I appreciate the kind words! Any other video showing schmear never showed the application
3 months post repair, just checking in to see how its holding up and if any touch ups were needed. Currently have a cracked skimmer myself, and trying to decide to go this route, or the two part pool putty.
So far so good! For me, I'll be curious to see how it holds up throughout the winter and if it will survive a freeze thaw cycle. I'm pretty confident we should be good! Personally I went the schmear route vs. 2 part epoxy because you are basically chemically welding the skimmer back together vs "gluing" although epoxy is a bit of a different animal....
Great video .. vital info and caution 👍👍
Thanks for the kind words! Hope the video helped!
Thank you so much for such a well explained and filmed DIY video on fixing my skimmer! The only thing that was missing was the drying time, although I assume that's on the MEK? My skimmer has a great big smile at the bottom because of the soil settlement pulling down on the T-junction underneath coming from another skimmer )))
Love to hear that it worked out! Yes it depends on the quality of the ABS pellets and MEK overall. Happy Skimmer equals a happy water bill!
You can use the plastic saw dust from cutting up a bucnh of scrap pvc pipe mix it with clear pvc cleaner and you have basically the same type of plastic putty. Also the two part pool putty works awesome just prep and clean the good have a few skimmers out there i patched years ago with pool putty still skimming and no leaks . Good videeo i have used the Hayward smear before it ok but it will crack again if the skimmer continues to settle or its being stressed from improper back fill or the pipes were forced when backfilled
Thanks for the comments! In my experience I would much rather take a good chemical weld over epoxy, but I agree that the prep is the most important thing!
Wow cool video I didn't know they made that epoxy
That's for the kind words! Good luck with the repair!
@RegsChannel How has the repair held up? Also, how long should you wait to let the repair cure before filling with water? I have a crack in the side of my skimmer that I need to repair quickly so that I don’t spend the repair money on a water bill. 😅 This looks like the best, most durable solution I have found.
Repair has held up fantastic! The longer you give it the better but I would want to give it at least a solid 24 hours. I was in the same boat as you it was insane how much money I saved on the water bill alone!
Hi, I just found your page. Great video! Just got a question. Do you think this method would work with PLA or Instamorph instead of ABS pellets? PLA is used for 3d printing plastic, and hardens like ABS when cooled. Instamorph is moldable when heated (with a heat gun or boiled in water), and also hardens when cooled, which could potentially eliminate the need for WEK.
Thanks for the kind words! In a failed video, I tried what I believed to be abs 3d printer filament, and it would not dissolve with the MEK. Here is the thing, the skimmer is made of ABS, when using ABS pellets dissolved with MEK you are basically chemically welding the material into one solid piece which is what you want... The other alternatives you mentioned along with things like epoxies or resins can fill the crack, but if the skimmer shifts and the pool deck, wall, or around moves a bit, those types of repairs will crack or shear at those seal points depending on their tensile strength. Using the pellet and MEK method, in my opinion provides for a much more robust repair. I hope that helps!
@@RegsChannel very reasonable answer. Thank you for that! ABS it is!
@@VinnieVerite no problem, good luck with the repair, keep us posted on how things work out!
Thank you for the video..I have the same problem, my skimmer it s very old and i have leak.. I tried many products ,like epoxy, but doesn't work.
I called the pool company for the estimated they ask me 2000$ for replacement.
I want to try the new stuff.. where did you buy?please let me know..for now I appreciate for the video and thank you very much
Hey there, yeah pool stores charge crazy amounts for the simples things. I was quoted 5000$ for a 450$ skimmer... I get that their time is worth something but that's a crazy markup! Here is a link to the pellets: www.poolweb.com/products/schmear-pellets-for-pvc-repairs-white
I assume you are in the states? That's a US link. You will also require MEK. The schmear pellets themselves will give you the mix ratio. I feel this is a superior fix because the MEK chemically melts the old skimmer and the pellets together. You are basically chemically welding plastic, not just bridging or covering the crack like 99 percent of other products out there do... Keep me posted, hope this helps!
C'est génial.😮
Thank you!
Very informative. I am not sure if my pool is leaking or just evaporating in the heat and wind. I believe you are suggesting one soaks the pellets in butanone overnight, in a sealed jar?
You are on the right track, Methyl Ethyl Ketone (MEK) is what needs to be used however.
en.m.wikipedia.org/wiki/Butanone
Same stuff. You have some great content on your channel.
I subscribed. Cheers from Barbados.
Do a bucket test to see if it's just evaporation
Put up material used. Methyl Ethel Keytone
I'm not sure I understand your comment, I mention in the description MEK, as well as reference it in the video. Hope that helps!
can you tell me what grit sandpaper you recommend?
Of course, I used some 120 grit to roughen things up
Where did you buy the Abs pellets/beads from?
You can Google "Hayward ABS Pellets" anything from them will work, however they are expensive directly from them. I opted to get ABS airsoft pellets, they worked perfectly. Just make sure they are ABS. Amazon has a few options as well for abs pellets. Avoid anything that has anything other than 100 percent ABS in it. I tried an ABS 3D printer filament and it had another resin mixed in, that one failed in my testing. Good luck with the repair!
Great Video. I have a brand new pool with a brand new skimmer that has a crack in the bottom like where you have. The builder is giving me the run around. The epoxy failed after a few weeks. They refuse to replace the skimmer box. I know where they applied the epoxy, so I'm going to try this next since the builder won't do a proper repair. Thanks for this.
That's rough! You would hope they would stand by their work. Sand it down to bare abs and prep it well, this should get it done because it's basically liquid ABS lol, it's like plastic welding. Keep me posted, good luck!
@@RegsChannel Thanks. Will do! Appreciate it.
@@RegsChannel so the builder came back. They changed the inlet tube that goes to the filter, they changed it out to the good one that is in the skimmer box. They then capped off the bad one, and filled it completely in with epoxy. We had two pipes but only one was used, so they switched it. I hope their fix works
@@jonlightsonnochaway the challenge with epoxy is tensile strength and resistance to shearing. I could be wrong here but it doesn't form a mechanical bond per se. That's why products like JB water weld or some of the 2 part epoxies can let go over time. Hopefully it's good for the long haul for you!
@@RegsChannel that’s my fear too. That it weakens. I don’t mind doing the shmear myself still. Would it be effective with shmear over the epoxy repair?
You rock❤️🛎🇨🇦
Well thanks for the kind words!! Much appreciated :)
How long does the repair product need to dry?
It depends on the consistency it is mixed to. It doesn't take long to set but I have it a few days to fully cure. Repair turned out great afterward!
I’ve been stirring for 40 minutes. Pellets do t seem to want to dissolve???
We have to be sure they are 100 percent ABS pellets... If they are taking that long to dissolve that may be an issue. Give it some time and see if they dissolve.
Would it work to crush the pellets before adding the MEK? 6:14
Hey Joe! Sure, if possible the finer the pellet the more surface area would make contact with the MEK. This would speed up the rate it dissolves at. However once it's mixed and sealed in a jar you can keep using it. I still have some leftover in the jar from when I did the video and it's still perfect!
Great thanks for the info
@@joeaustin7774 no problem, hope it helps!
Awesome video!! Can you use heavy gloves to smear the solution instead of the putty knife. That will make the job go faster and easier in such a small place. What is the name of those pellets that you used?
@@mikezandy320 thanks for the kind words! Ideally you are going to want to use a good solvent or chemical resistant glove when handling MEK. In terms of the pellets, you want to use 100 percent ABS. I used airsoft pellets. When using airsoft pellets if they are labelled as biodegradable, they are NOT 100 percent ABS. Hope that helps!
Can you use MEK substitute?
I personally have not tried a substitute but remember, you are trying to chemically "weld" the parts and the MEK allows the mixture to remain workable. Use the right tool for the job!
All I could find was MEK substitute and worked for me.
hi, after 1 year the skimmer it works with that repair?
Hi there, the pool has not been opened for the season yet as we are still in winter, but the repair looks like it held well! No cracking as far as I can tell. Will know definitely in about 6 weeks or so
@@RegsChannel good advice with solution with abs an links!hope you make more videos to help people
@@hhdstfc-fe1ur thanks for the kind words! I do hope to keep growing the channel 😀
really informative vid
next time please move obstacles out of your way
like vacuum hose
Thanks for the encouragement! The repair is holding up well, but I'll keep that in mind if there is ever a "next time"
Has the patch been holding one month in?
Hey there! Yes so far it has been great! It solidified/cured very well and feels just like the original skimmer material. Hope that helped!
1. This worked brilliantly and saved me thousands.
2. Used the same Colt BBs as used in the video and MEK which in Canada can be purchased from Canadian Tire.
3. Mixing the BBs in MEK will take overnight to properly blend. The benefit of using the Hayward Schmeer is that the ABS is much smaller and will blend with MEK more quickly. You can probably get the consistency in a couple of hours.
Overall I am super grateful this video was produced. Thank you.
@@elistanger117 thanks for the kind words! Agreed this fix saved big bucks!!! And yeah the trick part is ensuring you are using pure ABS... I literally filmed an entire video where I tried to use "ABS+" printer filament. Needless to say it didn't work. I still have some of the mixture sealed in jar. It's the consistency of toothpaste but it's ready for action if the need arises!
How long does it take to set up? When can I put water back into the pool?
@@michaelsunderman2882 I gave mine about 3-4 days to fully set up and cure. I basically pressed my thumbnail into it after a few days, and when I realized it didn't leave a mark I knew it was setup enough. Been great since!
Wouldn't it have been a lot easier to put in a new skimmer
Respectfully, I don't think so. I would need to cut out/dig out/remove the old skimmer, prep the area, install new gaskets, and re plumb the new skimmer. This involved sanding, prepping the area with MEK, mixing the schmear, and applying... Like 30-40 min of work vs. Hours. To each their own!
@@RegsChannelNot to mention the enormous cost difference.
@@texyat7388 yes very true! This is one of the key reasons I started my own CZcams channel, to try and help both empower folks and save them money!
Great video
Thanks for the kind words! Hope it helps!