The previous roofing job messed up the corner; you guys did a good job fixing that. And I'm sure the owner must appreciate the extra attention to detail on the threshhold. Hope you get to see your mom! Nas and Allie are a great team/couple!
Great Job!!! Thank you both... :-) Have a fun time in Mexico with your mom! I'm getting ready to do this to my flat roof in BC, Canada. (alone because my wife would never come up on the roof with me to help, you are soooo lucky) I have watched all your CZcams on going over the tar and gravel and this is what I'm planning to do. 5,000 sqft :-) Where do you buy the Turbo Poly Seal and fleece from? (I can easily drive over the border to buy from WA. state if it's only sold in the USA. Also have trouble finding Karnak 66 TROWEL GRADE here... Thank you again! I would not have even known where to start if it wasn't for you and your wife and son !! :-)
Many Thanks. Turbo only available in the states. Purchase online only. ABC Supply or Beacon Building Supply should be able to get you the Karnak 81 or 66 Trowel Grade
Seems like a practical approach , nothing fancy , his wife and him work well together…whistles n bows are not for everyone …. I believe the work is logical I doubt they will run into too many problems with this build… frugal budgeting whats not to love
Instead of using a torch, what can I use so that the cap sheet will attach securely to each other when they overlap? Is the hand-held hot air again as effective as a torch to melt the sticky membrane?
Hello great job , i have a few questions, can you do this over an existing granulated cap sheet with a low sloping roof?if yes, or would you need to place down asphalt first over the cap sheet so it will stick or do you nail down the base and then put on the granulated roof?
@@FlatRoofDoctor That is Polyglass self-adhered roofing. You're supposed to remove the existing roofing. From the current published specs for Polyglass self-adhered SBS roofing: "When re-roofing, *remove all prior roofing materials* down to a clean debris-free substrate and properly close off all abandoned roof penetrations." From the text of the Polyglass 20-year warranty: "The original installation of the roofing membrane must be in accordance with Polyglass current published specifications." That roof could never be warranteed for 25 years.
I’m wondering where in the states you are doing this type of work? Do you ever consider wind up lift? You are applying peel and stick cap sheet on torch membrane base? So many things point out. Unbelievable!
I think many of your subscribers would enjoy watching you explain to us when to choose between turbo poly seal and super silicone. I think you could make a very interesting video on this topic explaining the pros and cons of each and perhaps even how Bergstrom compares to other similar flashings. BTW, can super silicone be painted like the poly seal?@@FlatRoofDoctor
Here is a link to Home Depots site for the Liberty Cap sheet www.homedepot.com/p/GAF-Liberty-3-ft-x-34-ft-100-sq-ft-SBS-Self-Adhering-Cap-Sheet-Roll-for-Low-Slope-Roofing-in-White-3732920/100031926 Here is a link to Liberty Base sheet builderswarehouse.com/gaf-liberty-sbs-self-adhering-base-ply-modified-bitumen-membrane-2sq.html?gclid=Cj0KCQjw-pyqBhDmARIsAKd9XIODPIeM43Qbarh6KOfTa9Od7X5DZCXBSnNeEkzmylszQR9kJCG9Ay0aAvTdEALw_wcB
Yes. The Roof Doctor is knowledgeable and does great videos on roof repair. However, these may all be "Infomercials' for his Turbo Poly Seal. He owns the company that makes it.
you call me and we can talk about it. This was a plan in the the past. The training would have included, Torch Down, marketing, estimation, Hiring the right person. Choosing the right job. If we can get 5 people together to want to train then it is worth it.
I would not have been paid if there was a leak. I billed them 2 months later. BTW, I have been doing roofing for over 40 years. Everyone have there own tricks and methods. Just because I do it a different way than you, doesn't mean it is wrong. Make some videos and show your method. That might be helpful.
I have never left a comment or review on anything until today. I have viewed a few of your tutorials you have about how to do roofing. You are not a professional competent roofer at all. You cannot torch properly and have almost zero knowledge on basic flat roof systems There are so many steps you miss and do not know about that I can’t list them all The customers you do roofs for are not getting any professional workmanship You need to stop roofing on your own and go get hired at a reputable roofing company so you can learn how terrible you are at roofing. I sincerely hope you take this advice as your future customers deserve a roof done correctly Good luck
There are no words for how poor this is. This is the reason flat roofing has a bad reputation among most people. Do this to your shed, not your home or anything you wish to stay dry and leak-free.
Dude these roofs pull away shrimp mk up ,seems pop nails stick out .rubber roofs are so flawed , in a very short time this building will be condemned ,
I’ve been roofing for 43 years and your work is different the way you do things there it’s all scruffy and dirty and you don’t keep things uniform I would sack a roofer if he did work like that I can’t believe people say you do a nice job I’m not slagging you of just the way you do it
This job is not done in a Profesional way. I have been doing Roofing for 38 years and I would Never approve this kind of Job.Way Too MANY Mistakes.I will give you Tumbs Down
I’m wondering where in the states you are doing this type of work? Do you ever consider wind up lift? You are applying peel and stick cap sheet on torch membrane base? So many things point out. Unbelievable!
Great wife. She earned her trip to go see mom.
Great video
I think the wife deserves 75% of what the job paid.
She was a beast at carrying those rolls up.
What a gem of a wife! Respect from Gaza!
My best wishes to you in the US and your mom in Mexico, from nordwestern germany and thanks for your clips!
Thank you too! thanks for the comment from germany, thats awsome
I love her personality and hard work. Take her to see her mom. 2thumbs up!
She spend 20 days with her mom and just returned last week
I sent this video to Polyglass and they were completely mortified hahahaha
The previous roofing job messed up the corner; you guys did a good job fixing that. And I'm sure the owner must appreciate the extra attention to detail on the threshhold. Hope you get to see your mom! Nas and Allie are a great team/couple!
Thanks 👍 The EPDM is known for shrinking. That is what happens in corners and on the side walls
Send her to Mexico!! Great job, very clean.
Deal! Thanks my son
You guys are the best. I am really learning a lot from you. I love watching you work together. Thumbs up for Alie.👍👍
Awesome! Thank you! Allie is going to Mexico soon
Happy wife a happy life, she deserve to see her Mom from Brisbane Australia
Great job!
Awesome, I am doing this type of roof myself but I'm going to add a pitch, might as well. Thank you for sharing, best roofing job video!
Very nice plans and demo and explanations and communication between you and spouse. Thanks
Great Job!!! Thank you both... :-) Have a fun time in Mexico with your mom!
I'm getting ready to do this to my flat roof in BC, Canada. (alone because my wife would never come up on the roof with me to help, you are soooo lucky) I have watched all your CZcams on going over the tar and gravel and this is what I'm planning to do. 5,000 sqft :-) Where do you buy the Turbo Poly Seal and fleece from? (I can easily drive over the border to buy from WA. state if it's only sold in the USA. Also have trouble finding Karnak 66 TROWEL GRADE here...
Thank you again! I would not have even known where to start if it wasn't for you and your wife and son !! :-)
Many Thanks. Turbo only available in the states. Purchase online only. ABC Supply or Beacon Building Supply should be able to get you the Karnak 81 or 66 Trowel Grade
Seems like a practical approach , nothing fancy , his wife and him work well together…whistles n bows are not for everyone …. I believe the work is logical I doubt they will run into too many problems with this build… frugal budgeting whats not to love
Amazing! Beautiful people.
Thank you very much
It is getting cold up there so it is time to go see your mother. Have a great trip.
Thank you, I will
Vaya que mujer tan trabajadora ❤
Gracias
shes great!
You guys work great together both of you need a trip to Mexico.
Maybe one day! Yeeeeeh
Great work
😂😂😂 you are amazing guys well done, very nice job and I hope you will get to visit your mother with your husband 😊
She spend 20 days with her mom and just returned last week
👍🏼Great job. Your video helped me a lot. Enjoy your trip to Mexico. 🥰🍍🏝
Glad it was helpful!
Leaving tomorrow morning November 8. Thanks for all your support
I love her!
Any roofer with a modicum of professionalism knows what the weather will be.
Nice job you two. You deserve a trip yo see your Mom. Thanks for all the informative videos. They are much appreciated.
Our pleasure! She is excited to go
Wonderful job 🙏😇
Instead of using a torch, what can I use so that the cap sheet will attach securely to each other when they overlap? Is the hand-held hot air again as effective as a torch to melt the sticky membrane?
Nice job 👏 👍
You guys are awesome!!!👍
This type of roofing would never meet building regulation standards in Britain.
I have no clue what other countries do
Dude, it doesn’t mean building regulations over here in America. This guy is a complete scam.😂
Is the hand-held hot air gun as effective as the torch to melt the sticky membrane?
This guy is a good roofer. God bless him and his wife.
I love it.
Very nice job
so sweet ....!!!!!!
Hello great job , i have a few questions,
can you do this over an existing granulated cap sheet with a low sloping roof?if yes,
or would you need to place down asphalt first over the cap sheet so it will stick or do you nail down the base and then put on the granulated roof?
I saw some guys in another video appling this directly to plywood without the base membrane. How long do you think that will last?
it will last just as long. It is a good product.
What a great video! Thanks for sharing all of your knowledge
My pleasure! We thank you for commenting and watching
Life es muy Bueno
Just making it harder for the next guy who gets hired to do it correctly.
not for the next 25 years.
@@FlatRoofDoctor That is Polyglass self-adhered roofing. You're supposed to remove the existing roofing. From the current published specs for Polyglass self-adhered SBS roofing: "When re-roofing, *remove all prior roofing materials* down to a clean debris-free substrate and properly close off all abandoned roof penetrations." From the text of the Polyglass 20-year warranty: "The original installation of the roofing membrane must be in accordance with Polyglass current published specifications." That roof could never be warranteed for 25 years.
@@LoonypapaNot if you put turbo poly sealer on it
You know he's the CEO of Turbo Poly Seal. Lol.
Good honest job👌 SALUDOS🙏🏻🙏🏻
Super hack job
Thanks
Thanks for info
What is the best DIY material to install over flat concrete roof?
May Allah bless you
She is a great wife ... take her to Mexico for vacation 👍
I’m wondering where in the states you are doing this type of work? Do you ever consider wind up lift? You are applying peel and stick cap sheet on torch membrane base? So many things point out. Unbelievable!
can this be installed over an existing low sloped flat roof ?
yes goooooo🤩
the boards are wet an rotten you can't felt over that an ,,do you not use primer
How do I decide which to use: turbo poly seal or super silicone seal. Is there a way for me to know which is best for which applications?
most of the time I use Turbo Poly Seal. Super Silicone I use on skylights and EPDM Rubber Roofs
I think many of your subscribers would enjoy watching you explain to us when to choose between turbo poly seal and super silicone. I think you could make a very interesting video on this topic explaining the pros and cons of each and perhaps even how Bergstrom compares to other similar flashings. BTW, can super silicone be painted like the poly seal?@@FlatRoofDoctor
Can you tell me how much all of the supplies and materials cost?
Here is a link to Home Depots site for the Liberty Cap sheet www.homedepot.com/p/GAF-Liberty-3-ft-x-34-ft-100-sq-ft-SBS-Self-Adhering-Cap-Sheet-Roll-for-Low-Slope-Roofing-in-White-3732920/100031926
Here is a link to Liberty Base sheet builderswarehouse.com/gaf-liberty-sbs-self-adhering-base-ply-modified-bitumen-membrane-2sq.html?gclid=Cj0KCQjw-pyqBhDmARIsAKd9XIODPIeM43Qbarh6KOfTa9Od7X5DZCXBSnNeEkzmylszQR9kJCG9Ay0aAvTdEALw_wcB
Just search on Google for Peel and Stick Cap sheet and Peel and Stick Base sheet. There are many brands to choose from
Yes. The Roof Doctor is knowledgeable and does great videos on roof repair. However, these may all be "Infomercials' for his Turbo Poly Seal. He owns the company that makes it.
That's a mess
i wood have cut 4 or more inches off the door built up a litte wall there and the moved there door flashing thing up
a lot of more work for no more money
Great job do u doo training for people would like to learn torch down
you call me and we can talk about it. This was a plan in the the past. The training would have included, Torch Down, marketing, estimation, Hiring the right person. Choosing the right job. If we can get 5 people together to want to train then it is worth it.
👍👍👍
Thanks
STROUGSBURGH P.A RULE THE POCONOS
good
Bro, how did you land HER?!?!?
You realize you married above your level?😁
I admire the motivation of homeowners doing some roofing. There’s no way there’s not a leak after a rain like that.
I would not have been paid if there was a leak. I billed them 2 months later. BTW, I have been doing roofing for over 40 years. Everyone have there own tricks and methods. Just because I do it a different way than you, doesn't mean it is wrong. Make some videos and show your method. That might be helpful.
CAUTION: The Flat Roof Doctor owns the company that makes Turbo Poly Seal.
I have never left a comment or review on anything until today.
I have viewed a few of your tutorials you have about how to do roofing.
You are not a professional competent roofer at all.
You cannot torch properly and have almost zero knowledge on basic flat roof systems
There are so many steps you miss and do not know about that I can’t list them all
The customers you do roofs for are not getting any professional workmanship
You need to stop roofing on your own and go get hired at a reputable roofing company so you can learn how terrible you are at roofing.
I sincerely hope you take this advice as your future customers deserve a roof done correctly
Good luck
Wrong. Amigos. U do need a roofing contractor. And licensed. And insurance.. they are experts on this. ....and mush have guaranteed...
There are no words for how poor this is. This is the reason flat roofing has a bad reputation among most people. Do this to your shed, not your home or anything you wish to stay dry and leak-free.
Slap on some Turbo Poly Seal and you'll be fine
Spot on mate.
I can think of one word. This install is a joke.😂😂
I don't know I have watched this guy a lot a am a roofer his work is good.
I got 8 minutes in and gave up watching.
Dude these roofs pull away shrimp mk up ,seems pop nails stick out .rubber roofs are so flawed , in a very short time this building will be condemned ,
I’ve been roofing for 43 years and your work is different the way you do things there it’s all scruffy and dirty and you don’t keep things uniform I would sack a roofer if he did work like that I can’t believe people say you do a nice job I’m not slagging you of just the way you do it
He has the price of his turbo Poly Seal insanely high. Rip -Off city.
Prime example of a hack job. Time for him to retire.
This job is not done in a Profesional way. I have been doing Roofing for 38 years and I would Never approve this kind of Job.Way Too MANY Mistakes.I will give you Tumbs Down
the roof is only as good as the roofer and what I see you do is scruffy work
❤very good. información
Thanks
I’m wondering where in the states you are doing this type of work? Do you ever consider wind up lift? You are applying peel and stick cap sheet on torch membrane base? So many things point out. Unbelievable!