Top 3 Youtube Bike Fits ⊠did any of them work?
VloĆŸit
- Äas pĆidĂĄn 6. 06. 2024
- SUBSCRIBE: bit.ly/2gMWc1t
Using CZcams To Do A Bike Fit
#cycling #bikefit
Giving yourself a bike fit from the videos on CZcams seems to be a very popular things, well at least according to the views these videos receive.
So I thought it would be cool to try and use a collection of these videos to try and work out which videos, or which sequence of videos would be the best.
I hope you find this video informative and entertaining.
Chris
Chapters:
00:00 Intro
00:47 The Rules
01:27 Cleat Set Up
02:51 Saddle Height V1
04:05 Saddle Set Back
05:30 Effect On Power
06:06 Saddle Height V2
07:21 Saddle Height V3
08:23 Bike Fit Professional
10:00 Conclusions: The Best Videos
Big thanks to the creators channels and videos I used to make this video, check out the guys below
Cam's Channel - / @camnicholls @CamNicholls
Francis Channel - / @cade_media @Cade_Media
Dylans's Channel - / @dylanjohnsoncycling @DylanJohnsonCycling
And if you can't find @gcn ... then you are trying hard enough đ
If you are in Sydney and need a bike fit,, be sure to check out Tom Petty at Embassy Cycling (embassy.cc).
Be sure to mention this video and he'll give you an extra hug on arrival đ«¶đ».
The Nero Show is available on your favourite Podcast platform
Spotify:
open.spotify.com/show/0UEODvA...
Amazon:
music.amazon.com/podcasts/285...
Apple Podcasts:
podcasts.apple.com/us/podcast...|-unfiltered-cycling-podcast/id1659229051
-----------------------------------------------------------------------------
INSTAGRAM: @chrismiller27 @nerocontinental
TWITTER: @chrismiller @nerocontinental
STRAVA: / strava
SERVICE & SUPPORT: Cycling Projects Racing
Check Out Jesse's Coaching: www.nero.club/coaching - Sport
I spent a year and half going through all these videos and adjusting things one by one only to cause an issue somewhere else. Even saw 2 bike fitters during that process and it only made things worse. It finally occurred to me that my bike was probably just the wrong size, and no one had suggested that. I got a pre-purchase bike fit to find something that would better fit me & life has been much better.
what kind of bike fitters have you seen if they couldn't identify such baseline problem?
And,,, which way did you go?
i also spent almost 1year watched all the video here in YT every bike fit topic and im glad that all of that curiosity and sleepless nights paid off.
every ride, every training when go home trying to adjust what is wrong in my bike position.
stem, crank lenght, fore and aft, dropbar reach lenght , cleats positioning etc.
bike fit is not a overnight process it takes time to overcome all your pain.
i do know now what frame size for me and what reach and stack i need. now im waiting for my framesize.
just wanna share this for the people out there with no money to go bike fit.
do your research guys take time and adjust what you feel wrong in ur position until you get the right position.
Bike fit first, buy bike later. I did it backwards.
@@biyaherosikiks exactly. watching those vids actually tell what is happening in your body. Might be overwhelming for some people but once you get it, you'll figure out what works for you
Bike fitting really is a deep, deep rabbit hole. Especially when you're not willing to fit the bill for a pro fit, and try instead to do it yourself. I have a 56cm Cannondale CAAD9 (probably should be on a 54 I realize now) that I have put nearly 100,000 miles on (both IRL riding and Zwifting). And to be honest with you, I've long since developed and OCD thing where I find myself making almost daily micro-adjustments in search of perfection. But I've come to determine that perfection does not exist; everything from different bib shorts to shoe changes to just being tired can throw the fit off I have found, not dramatically, but just enough that someone who has been riding a very, very long time can and will notice. Sometimes you just have to say F it, and admit that close is good enough.
So your preferred bike fitter uses âidealâ target ranges for one-sided joint angles and bike-body relationships based on arbitrarily placed dots in motion capture software. HmmâŠ
Much more a fan of Neill Stanburyâs approach - based on assessing the individual riderâs 3-dimensional muscle engagement balance and comfort, accounting for their own parameters of flexibility, core stability, limb proportions etc.
Yeah I feel the same, I'm still looking for someone in Ireland with the same mindset as him
Neil and James hands down best channel so far for bike fitting
I do my own bike fit from watching CZcams vids and it works for me as i am not a pro cyclist. I prioritize comfort over speed, and so my bike setup looks more like an endurance bike instead of a racing bike. It's all good, no shoulder/neck/back/hand/knee pain.
I think the fit methods shown on Camâs channel with Neil Stanbury and BikeFitJames are the best on CZcams. They have very similar methodologies and make a lot of sense. Although I think anyone would get value from a proper 3 or 4 hour bike fit from a fitter of their calibre.
Agree, but the big problem being finding a fitter of their caliber, which is really hard.
James and Neil are both very good but have different approaches. I take a bit from each and others, especially from some guy called LeMond.
What I liked about Neil is that he does not rely on tech or formulas. He relies on his knowledge about the human body and individual differences with people.
Bike fitting, conscious .. riding the bike, subconscious
I've certainly been down this rabbit hole, and unfortunately my bike fitter is no longer with us. But he always (rightly) told me that MY biggest problem was in my head; because I would have a bad day or it was windy or my muscles were sore or tight...and I'd start moving things that didn't need to be moved. What I DID learn from my trip down the youtube vortex that was most effective for the at home fit, which I think came from Neill and Cam, was to set it lower than you normally would as a starting point, and then bump it up 5mm every couple of rides until it felt right, and then stop raising it before your hips started rocking.
Agree that the worst thing you can do is change your fit after a bad day or two. Itâs really hard to get things normalized when your messing around all the time.
i spent almost 1year watched all the video here in YT every bike fit topic and im glad that all of that curiosity and sleepless nights paid off.
every ride, every training when go home trying to adjust what is wrong in my bike position.
stem, crank lenght, fore and aft, dropbar reach lenght , cleats positioning etc.
bike fit is not a overnight process it takes time to overcome all your pain.
i do know now what frame size for me and what reach and stack i need. now im waiting for my framesize.
just wanna share this for the people out there with no money to go bike fit.
do your research guys take time and adjust what you feel wrong in ur position until you get the right position.
I've always done my bike fits out on the road personally. Much easier to feel the effect of your tweaks during real riding.
I hate to admit it, but I have in fact seen all the videos featured here, and while I'm sure they're well intended, they didn't help much. I agree that the heel-to-pedal method will probably get you closer than most other methods. (The LeMond method is particularly silly, since it completely ignores crank length or the rest of the rider's physical characteristics.)
I'm extremely skeptical about getting a bike fit; there are probably a few geniuses out there, but I firmly believe that the vast majority of fitters have little or no idea what they're doing.
đđ»
Okay, this will be a detailed comment. I am from India. I have applied these videos, not only to myself but 50 or so clients which is not a lot but not insubstantial either. A partial reason that Chris trying to implement the videos did not work is that he "mixed" the sources he took info from on each parameter.
1. For saddle height, Neil's video is by far the best. All of the other methods are only "ballpark" ones. James I think uses similarly but does not give it away in the video. He says "smoothness and control through the bottom of the stroke" without giving it away.
2. For cleat placement unless one is a sprint, I have seen very little harm in pushing them as far back as possible as they will go in the shoe, unless on a BONT shoe.
3. For seat setback again Neil or James' video is the best resource.
I am not telling from my experience but trying similarly on clients.
A few more things. It is not very wise to judge a position without the necessary time for adaptation, which I am not sure was given here. Jerry Gerlich is a world-class fitter whose pain went away only 1 month after his Bikefit visit to Steve Hogg. I would not necessarily say a position is bad 10 days out after a new fit without that adaptation period or need for acclimatization.
A few reasons why using numbers don't work the best for "non-relevant" individuals.
Chris is a pretty fit athlete by the standards of the average individual. If you read about the history of Retul, its "data points" are made of Tour riders, which Chris is relevant to. If a layman goes and is fitted with that data as a reference, the results in many cases are sketchy at best. I would also say that the world's best bike fitters are not those who can fit those who are very functional, because those individuals by definition almost have a much larger error bandwidth to play with. It is the ones who can fit those who are much more susceptible to injury and less functional because those clients have a much smaller "window". This is a good link into the fallacies of the systematized approach in bike fit or otherwise. www.thestar.com/news/insight/2016/01/16/when-us-air-force-discovered-the-flaw-of-averages.html?rf
One more thing is referencing power for seat height is really not very wise. Two reasons.
1. The experiments might not have given riders enough time for adaptation. And hence a method that is closest to the familiar position may help you produce more power but that does not mean it is ideal.
2. A lot can be done to make you produce more power. But it has to be repeatable and sustainable. One could make changes in seat height to make you produce more power but also blow your knees. Hence it may not be a good place to pull it from.
Also, there are many places in the world where those videos can be vastly beneficial. India is certainly one of them, where expert bike fit has hardly seeped through. Australia is NOT one of them and you may as well see an expert. Especially Steve Hogg or Neil Stanbury himself. I think the collection of videos you choose has to be "coherent" for each parameter else you don't solve the jigsaw and so happened here to an extent. I commented to help the parts in the world who do not have access to experts or very good bike fitters.
Something I learned in life. I am 62. Last year I had a couple of small things I needed adjusted on two bikes. So I make an appointment with someone who would probably understand what he was looking at. Heâs helping me take the bikes off the car and makes a comment about European Slam. The first bike just needed a tweak on the left shifter (4mm). The next required a new stem. I went from a -8 degree 120mm stem to a -17 130mm stem. His parting comment was if I went to a standard fitter they would have tried to make me more upright, when I needed to be low. The point is standards are for average folks not people who have lived 40 years as a pretzel.
As a fellow 40 year pretzel đ„š Iâm 6â2â and ride a 130-140 stem on my bikes. If I started riding today with no experience my setup would be dramatically different. For my height I ride very low. Itâs been a huge advantage racing over the years. I have found a shorter stem causes my back to compress and causes discomfort. A higher stem takes too much weight off my arms and also causes back and butt discomfort.
As a 6ft2 33 year old I agree with these comments I rode upright for a bit and it was freaking killing my ass!!! đ
Great video Chris and completely agree. These videos may be helpful, but they are not a replacement for a good bike fit. The biggest thing I get out of a bike fit is a better understanding of my own body and how I need a bike setup for me. Iâve recently had a fit with Neill Stanbury and he really does know what heâs talking about. I could watch his videos and play with my position for weeks, but Iâd never have his eye, knowledge and experience.
That fluro zinc is straight out of World Series cricket. Need to see more of this out and about on weekend mornings
My situation highlights how different each person is. The Lemond method and the heal on pedal leg straight, give me a very similar result. Every time I move away from this method (mainly to fix lack of core strength putting pressure on my hands) I get knee pain within an hour of the first ride.
Saddle height and cleat position seem to be the two constants even as I get old less flexible and heavier, If I try and change will they both will cause me grief
Great work Chris! Just get a fit!
3:10 in Simons most recent bike fit video he and the fitter actually said that the heel on pedal method also isnât very accurate, because if you have your heels more pointing up while pedalling it increases the length and then your shoe is hovering a centimetre or so above the pedal when stretched out
ahhh! GCN just droped another one about bike fit.
I agree with you, even when I changed from SPD SL to the Favero I went to my bike fitter. It's just about being effective, not fiddling around with your body. just pay the bike fitter, instead of having some kind of lesion.
Great job Chris, it just reminded me of what I did in the past, research bike fitting stuff on CZcams. Holly hell I fallen all the way down that rabbit hole âčïž. I then started hating my bike so much for causing so much discomfort I ended by going to professional bike fitter to sort me out.
That was 3 years ago and now Iâm due for another bike fit since things have changed as Iâm getting much older and less flexible.
Cheers
Good stuff!
and now we got a new bike fit video :). thanks for sharing
I did same. Did my setup from CZcams then paid âŹ180 for a pro bikefit to told everything was where it should be. I found the lemons system left me to low also. That said Iâd still recommend the bike fit. It was a very impressive process and not everyone is built perfect which a proper bike fit captures.
Great video. Appreciate the effort that went into that process. Any recommendations about a bike fitter in Adelaide?
Great video, a proper bike fit is a VERY involved process - leg length discrepancy, knee tracking, body flexibility..... it is an eye opener.
Great work Chris đ đ»
Thanks for that!
I went down the bikefit by youtube a couple of years ago after having not had a bikefit for 12 years (albeit with only two bikes in that time). Went through all the bits (cleat position, seat height, setback, hand position, and slowly things got worse. I continued looking and persisted with the changes until one day I realised enough was enough. I went back to the measurements I took from my bike BEFORE I went down the CZcams rabbit hole, and wholesale changed everything back to what it was prior. I've since been on that fit/geometry for 2 years without an issue and feeling 100% fine.
Great video Chris. I find that even though the YT bike fit content is great and there is an abundance of it, it is very hard for the fitters to not convey their own biases on to the audience. Eg: saddle almost always too high, cleats almost always too far forward, reach almost always too long. It takes away the individual nature of fitting and ultimately the human body, leading to generic advice which for some is not the way forward. Informative, entertaining videos that provide some level of education but can never replace the unique nature of psycho-biomechanics.
Glad you enjoyed it
Really clever idea for a video and well executed. Thank you.
With all the money people (myself included) are spending on kit and upgrades etc just makes me think a bike fit is 100% best value for money option!
Glad you enjoyed it!
Maybe⊠the new position that gave you your best power numbers was spot on and you got the tight hip flexors because you were not used to that position. It was new and your body was still adapting to the new ergonomics. Iâve always found the slightest change will upset the body until it adapts.
Maybe. Are you trying to send me further down the rabbit hole
You likely started to have hip flexor issues because as you lower the saddle, it closes off the hip. If that saddle height was truly the correct height for you, swapping to shorter cranks may have solved the hip flexor problem. With that said if you're in a comfortable position, I wouldn't touch a thing@@ChrisMillerCycling
Iâve only used Neil Stanbury and Bike Fit James videos, and like others have picked and chosen advice from both. Jamesâ best advice was to shove the cleat all the way back on the foot, and Neilâs best advice was how to find the right saddle height.
I had similar experiences with saddle height and trying to get the right feel. Most of the methods left me feeling about 1 to 1.5cm too low, and sure enough that's where I ended up after I went off of feel and power. I've been fit since and my saddle height was basically spot on. I think there's a general theory that too low is better than too high, and since most people aren't highly functional, they never notice. If you already have some flexibility and miles in the legs, you will feel squished with *most* videos. Bike fitter is a good set of eyes to use for this process, it takes forever doing it yourself.
Hi, something that could have helped you is computer vision bike fit.
A couple of CZcams channel have done their bike fit that way.
They film them self pedal then import the video file to a website and the website tells them what to change.
It's very close to what a bikefiter would do.
đ€Chris, the content youâre putting out is so so so good. I know how long it takes to research/film/edit these types of videos, and Iâm in awe at how great of a job youâre doing.
I appreciate that!
Really good Chris! The sheer number of people who spend thousands on a bike but don't have a bike fit is unbelievable. Bare in mind that you know what your position is meant to be on the bike too, so imagine how a CZcams fit for a complete beginner would be đ€Ł
Great work Chris. The CZcams videos get you 80%. A good bike fitter will get you 100% and it will be much quicker. The problem is finding a good local bike fitter. I travel 800 miles to see mine. I go every 4-5 years for little tweaks due to aging (flexibility, weight gain, etc).
@Jonathon Taylor Thomas I live near a large city, but all the fitters here are terrible. A buddy did go to a new local fitter for his shoes and said the guy was very, very good. I'll have to check him out.
My local shop used the Holmes method for the saddle height and also a plumb line and I have to say no issues in 6 years
I went down the rabbit hole during Covid. It took me almost a 2 yrs after the ballpark suggestions to get dialled, mainly my handlebar reach and height, the three me for a six. Iâd 100% percent recommend just getting a professional bike fit and with the said, the reason for my prolonged struggle is that where I live, bike fits are reserved for new bike purchases where stores just wonât help unless a high end bike is being bought or pro fits are reserved for recognised athletes.
Saddle hight and fore aft is most important. I use lemond 0.883 method and Holmes to find correct height starting point then just 2-3mm up or down and it works for me. Fore aft position of the saddle: Kops (protecting the knees) and balance point. Thats it
found that the LeMond measurement was low as well. The 'heal on the pedal w/shoe ON' worked for me.
Thanks for your thoughts Chris
Great video Chris, after following the same process you have in the video I had the same problems, went for a bike fit, problem solved.
Glad it helped
Far too relevant for me right now. Currently in this rabbit hole and my partner canât deal with the updates anymore đ
Fantastic vid. Great shout outs.
Your partner should have coffee with mine and exchange notes
Took me a quiet a bit of time to figure it out as everything is related. Iâm riding a size too small with 4mm extra above my right cleat. Took a lot of trial and error but it works for me, I can just guess if a bike fitter would have found that out.
My go to when I first started cycling seriously, a book by CONI the Italian Cycling Federation. Had everything in it. Position, Training, Maintenance. And its been the mainstay of my position for 45yrs. With the odd tweak to ageing. Agree get a professional bike fit when you dont know, costs sure but worth it.
I had issues with the fit calculators posted everywhere putting me on a larger frame than works for me due to my height mixed with asian proportions. My current fit is based on a combo of videos & trial & error. The trial & error part is expensive but I think I'm there now. Now I'm at the point I want to get a proper fit(I know I should have started there). I do feel the Neal Stansbury (Cam Nichols), Kinetic cycling, & bikefit James (Francis Cade) made it work best for me.
At 5:00 you are finding it impossible to ride a line.
Solution: your axis of balance (line drawn up through head tube) is off by 6-8", it needs to go through your ear (balance).
Your top tube needs to be 3-5cm longer.
At 9:20 a line thru your steer tube hits your shoulder.
I just fiddle with everything until it feels right then ride that for a while and then change it and start the micro adjustments again until I get my next optimum position. I've been doing that for thirty years. Never did me one bit of harm.
FinallyâŠa great video on bike fitting! Itâs simple , you canât see yourself when bike fitting thatâs why you need someone to help.
Right on!
In my experience, the biggest pitfalls of the generic approaches seem to be they do not reveal the impact of asymmetry well, which leads to injury. For those with dimensional or functional asymmetry a good bike fitter is always worth it.
Neil does address this in his videos
There obviously is a point of diminishing returns. More is not more. Ultimately you will be the judge of your fitter or video by the result out riding. Find a fitter you trust. Develop a relationship with them. I have one and I have had a fit and a number of "refresh" fits over the last year or so. Things come up along the way. The body is not static, it's dynamic. As time goes by it can change a bit. Over time I have changed bars, seats, etc. all with the help of a fit. Sometimes I thought I was there but something would come up at some point and things would need to be tweaked. It is a process, not a procedure. Just my second full season on a road bike in 2023 and rode over 6100 miles with basically no issues at 60 years old. Aside from that, I do enjoy Neill's videos the most and learn much from them.
Most recreational riders do ok with self fitting or a basic it from the store, as they aren't doing long hours on the saddle or pushing watts or riding regularly (4 to 5 days/week) and they usually ride more upright in general with more forgiving endurance geometry bikes. If you're not in the category above, you'll benefit from a bike fit
genuis! you're doing god's work watching all these vids!
Me and 2.5million of my fiends đ
I ride for more than 40 years. Never did a fit. Saddle height by heel method, Saddle position knee tip over forward pedal axle, handlebar distance to saddle front tip equals elbow to fingertip, height by convenience. Done.
Cool vid! I've been riding for decades and never had a bike fit. Before I discovered utube i just read articles and followed whom I thought seemed credible back in like 2008. So I think my fit is in the ballpark as haven't had many issues, but would be interesting to see how wrong I've got it!
Glad I could help!
in my experience you have to ride lots, listen to your body and bring some basic tools and a sharpie to mark where things are before you change them so you can get that back if you need too. good hard regular commutes will help clue you in to what needs to be done. your body will adapt and change as you get stronger, just go with the flow
Spent about 500 miles on it and so far so good. czcams.com/users/postUgkxMesz3KOGEmwmvyKQfLfrRSUXLFzfVHZA Pros:1. Very light2. Solid quality build3. Fast delivery: It arrived 5 weeks earlier than expected.4. Easy assemblyJust a few cons but nothing major:1. Cheap tin tubes and had flat on first day... but not a big deal. I replaced the tubes.2. Seat is a bit uncomfortable but that's pretty much the same situation with most bikes.3. Seat post is a bit long/high for a smaller size 48 bike - had to saw 2 inch off to fit properly. The lowest setting is too high. The post locking system does not seem to hold well (perhaps because I saw 2 inch off).4. wheels are not tubeless compatible (from what I can tell)
Great video at a great time for me - self bike fitting is such a rabbit hole.
Glad it was helpful!
@@ChrisMillerCycling CGN literally just dropped another bike fit video too...!
Great video and good idea
Glad you enjoyed it
Fun video! As I still ride bikes from the 80's I've often wondered how relevent modern bike fit videos are for us retrogrouchs. The 7-Eleven Cycling for success video from the time is on youtube and has a bike fit segment, I followed it and found it to be bang on! Curious to see what's really changed
Glad you enjoyed it
Yes, it is 18:55 in the 7-Eleven video
Going through the same thing Chris. Chaffing on my left side . Watched all those videos. I am lost
Totally agree... I thought I would be able to adjust my bike myself and didn't need a professional bike fit. What a waste of time on my end should have just gone immediately to get the bike fitted
I like the idea of this video, but I am not sure about the conclusion that you just need a bike fit to skip the process and solve the issue. I also watched all these videos and I tried to concentrate on how the body should feel when you are in the correct position. I loved the process on how to self adjust and I then added those aspects to my own videos on bike fit as I believe that the key is to move away from given dimensions and angles and focus instead on learning what to look for to pedal efficiently. I believe you could have escaped the rabbit hole!
Many people donât live near a proper bike fitter (meaning a specialist, not a bloke at a bike shop who took a three-hour course on how to use Retul), unfortunately. Myself included.
Hope done right some people calculate of saddle height is measured from pedal axle or centre of bottom bracket as far as I know
Dylan Johnson video recommends 25 degree knee angle as the best method.
Go with whatever looks the most pro. Because 70% of cycling performance is down to how you look. đ
Actually, the exact advice I hear from the groups I ride with and the only advice my subconscious tells me is true.
Great video, but a non-bike-fit question that I'd appreciate some advice on. As in Australia we do experience some brutal sun in South Africa. Nobody talks about sun-care with regards to cycling. Maybe it's because most of us feel that the cycling tan is a sign of experience, or something along those lines. Any advice on sun-care on bikes? How to avoid getting it all over your bike when sweating, burning eyes, reapplication on long endurance rides/races, etc.
What length are your Crankarms? The Lemond Method assumes 175mm (I think??) The Armstrong Method measures to the pedal spindle, so Crankarm length (if you run shorter cranks like 165mm) isn't a multiplier issue.
James from the Cade videos sums it up best , race bikes are designed around 20 somethings elite level athletes who have the flexibility and core strength to perform a plank for hours on a bike . It's totally irrelevant to the average joe/joanna. Most brands size guides put customers on a size thats too big
I've never been fit, and my local shop doesn't offer fitting. What should I look for when picking a bike fitter?
Mate I too have been down this rabbit hole or should I say fit hole...
And I agree with ur ending comment!!!
Give a local bike fitter some business and u and ur body a pieces of mind!!!!!
Very good! I've also found that Neil Stanbury puts me too low (and he looks too low too) with that same hip burn. But in my case it also gives way to really critical back pain the day after the ride. Retul also puts people pretty low with their 38 to 43 degree knee bend. THat said, Shimano Bikefitting put me too high with a pain outside my left knee and saddle sores. "instep on pedal and straight leg" seems to get me very close. Or "heels scraping on pedals".
Just a couple of points 1) at 440 the hands are supposed to "hover" over the hoods to do the test. Can you hold that position? You look very forward on the saddle. I find that that test puts me about 1cm too far back. Maybe I have very weak core muscles! FWIW KOPS also puts me very far back.
2) at 6.35 - 0.883 nearly always puts people about 1cm higher than "heels on pedals". Very suprised it puts you lower.
Great video mate, out of interest what saddle height are you running now? is that 712mm from centre of BB to top of the saddle? Just ive got the exact same inseam as yourself. Also is that with a 170mm crank length?
Thanks RR. 712mm with a 172.5 crank đđœđđœ
Saddle setback of 24mm?!
Iâm a huge fan of the forward position but thats next level quad engagement.
UCI rules is 5cm minimum!
@@MarkRiddellRacingUCI has no jurisdiction here!!!
Thank you!
You're welcome!
Chris - l would have loved to hear during this video how the position/s compared with your normal road bike.
And work from there.
I noticed you did not address the stack height or stem length. đ€
Nice OG Macintosh on the shelf!
Thanks!
First of all and most importantâŠFINDING A COMPLETE EXPERT bike fitter in many peoples area is close to impossible. On CZcams ONLY Neil and James are worth a listen. They get the body, they get the bike geo stuff.
12:06 THIS is what I needed to hear after 3 weeks of watching CZcams videos đ
Chris.. Brilliant video.!! Rabbit hole-no no, you mean crater.! it is an on going issue for most.
I believe the reason for the big view numbers for these videos are because the average hubbard out there (myself included) need/would rather spend the money on on hard tangible components/kit/consumables first before a bikefit. We reason that we are somewhat intelligent and could just watch a few (hundred) videos and then just tweek every thing with an allen key (Several Ikea ones lying around) and a shifting spanner.!
How hard can it be.?? đ€Ł
Haha!!! Been there mate. Thanks for the comment.
Ball park it and adjust it little by little. Youâll find your sweet spot eventually and donât fix something that isnât broken. If your fit isnât causing you discomfort donât faff with it. Youâll make it worse
Honestly just doing my fit myself isn't perfect but I was never injured. Just discomfort and not feeling planted into the saddle.
I've been off my bike for 2 years now and have a permantant injury from going to "bike fitters". The first one (Specialized Reutr fit or something. Avoid that s**t) F'ed up my knee and the second left me with a ruined tendons in both ankles. I'll never be able to ride like I used to.
A real lesson for us all thanks Chris or Mr Guinea pig a video of value for every cyclist.
Haha!! Miller-pig đœ
@@ChrisMillerCycling NO but on behalf of your subscribers a Guinea pig yes or a large white haha.
Good video. I've done the same thing with the same results just get a proper fit
Right on
Even if your position is perfect on day one, it will take time for your body to acclimate to the cycling position. Moving the position causes a big chase of a moving target. What is most comfortable on day one, may not (and probably not) will be the optimal and most comfortable position in the long run.
Had a Retul bike fit years back probably 2017. While watching neils cleat position video I was curious why my cleats were so far forward. Moved them back and felt better. Luckily its Zwift season here and I can make small adjustments to find a better position than my Retul chart indicated. The fitter did find a short seat bone issue which was very intuitive of him. I finally removed the 2mm cleat shim and shimmed my seat up 2mm instead to straighten my position on the saddle. Yes my saddle is not broken its just adjusted properly. And yes youtube videos are very subjective and for the most part if you want a close fit get fitted. Even though your exact position may not be perfect with the fit it did find physical issues that most people cannot find on their own. Who knew my ass wasnt straight. đ
Oh man - I wish I could find those Rapha shoes. Those are super clean!
Due out later this month
Great vid, even better timing to gain some CZcams views with GCN releasing a similar video đ
No way!
Which Rapha shoes are those? Protos? Haven't seen those before..
Grear stuff Chris, i guess thats the last bike video you are doing đ€Ł
Nobody here has considered comfort. Comfort is everything.
What size frame are you generally on?
How are the rollers holding up you used in the video...I've been eyeing them up for a while now.
Very useful. Though I donât use them much
Thank you for a great video. I think your conclusion to see a professional is obviously a good one. But, I think you missed one trick. You shot some excellent video, and that appeared to show you 2cm ahead of the traditional kneecap over pedal axle fitting guideline, which ended up being the only thing wrong with your initial position (and like many experienced cyclists, you have active ankles/calves and run your saddle higher than guidelines).
So, I think those of us jumping into this rabbit hole should shoot video. I'll bet some stuff will be stick out and fail the eye test.
That's a rabbit hole I've been down! 2 years of butt aches later I had a 1 hour bike fit. I think need the 3 hour version! Any good Melbourne/Geelong options?
If in Australia, go to Steve Hogg. He is the best in the world. It would be worth it.
Even a professionnal bike fit won't help much sometimes because there are only a few good fitters. I find the best way is to learn to do it yourself, with videos, by filimng yourself adjusting bit by bit without too much drastic changes at a time.
Doing it yourself requires a degree of self awareness that few have. The concept of being within range of motion isnât complicated, put a contrasting dot on your hip and film yourself from the side. I teach pedal stroke, I have suggested this to every one of my students. Maybe 5% actually do it. Without self awareness you only have what is familiar, which is usually what caused the injury in the first place.
Bonza contentâŠ.we all love a good bike fit vid
I feel like saddle setback and saddle height have to be decided together.
This is an amazingly good video, and important for people who are riding road bikes more than a few hours a week. I was down "the rabbit hole" for many years, and finally had a pro bike fit last December which has made a HUGE difference in my cycling enjoyment. My saddle was about the right height - amazingly, but set way too far back. And it was discovered that because my Tibia is much longer as a percentage of my overall leg length that I needed 170mm cranks (on a 58cm frame) vs. the 175s i've been riding for decades. My comfort improved immediately and I gained 10% on my FTP as well. Your conclusion that getting a pro bike fit is the right call, is indeed totally correct. I wish I'd done it years ago...
video is a bit subjective. I presume your original bike fit have been put to use for quite some time? if so then deviating from that will only cause discomfort. the youtube bike fit videos are excellent and in my opinion mainly designed to benefit beginners such as myself and it has helped me greatly. on another note, you are absolutely on point with just simply going to a reputable not just any bikefitter and getting a proper bike fit as the diy bike fit can be time consuming. fortunately I find that sort of thing fun đ very nice video and thank you for taking the time to research and share to the community. well done sir.
Have I missed something. They look new model rapha pro team shoes ? Hopefully they fixed the tongue issueâŠ.
This is me, and after years of self diagnosing Iâm finally doing a bike fit tomorrow đ
Have fun!
@@ChrisMillerCycling I had everything wrong, for starters i had the saddle max forward, it's now at the max rear, saddle was raised to the maximum, handlebars were dropped, cleats moved back and we still have to put a longer stem (100mm currently up to 110 or possibly 120mm). I had to join a conf call so we didn't have time to make that adjustment but I'm going back to him next month as I have two other bikes that I now realise need massive adjustments. Game changer!
Funniest part of it all is that GCN released a "bike fit" video 8h after this one vent live. Can't even make this up. LOL đ€Łđ
Conclusion is
If u are macro absorber , u do not Need Bike fit immediatelly
If u are Micro absorber, get a bike fit