Hey Sweetwater....This guy just sold me on the Mackie ProFXV3 in the first 3 minutes of this video. Give him a commission bump wouldya....He's killin' it out here.
I love it and is it a recorder also and if so how many tracks this demo was awesome !! Ernie Flanagan here and my email is bassman6128@gmail.c...this is the best demo of a product that i have ever seen...Mackie ProFX SOLD SOLD
First off-Y'all have the right man for this video.. D'Vigilio's energy and comprehensive approach to everything is very no nonesense and to the point without feeling sterile or weird. 2nd-I'm here because I just bought one of these and i can't wait to put it through it's paces.. !
Nick D'Virgilio is such a great drummer, and I love his videos for Sweetwater. This was a great video, for a super great product, and I'm definitely gonna pick one of these up!
I was planning on buying a Tascam 24 track recorder but I think this is way better. Way less of a learning curve and just a great little mixer. Look forward to receiving it at my door. :)
I bought this same model a few days ago and it was screwed up. The faders per each channel controlled the FX and not the volume, and it didn’t register in the streaming platform I use; Mixlr. I’m returning it. But Nick, you did a great job as always.
@@bathstreetblues2588 I've tried it with ProTools and Cakewalk and it works fine. Love the ability to patch in analog gear and monitor directly with no latency. The Blend knob lets you balance DAW playback with the inputs you are recording in the phones or monitors.
@@frankcoffey im guessing it doesn't work as a daw controller, also how many of the channels can you record together, with some usb analogue desk you can only record 2 via usb? Thanks for the reply
Thanks, great news! Small note: in your website, the product images are not visible maybe for some tech reason. All other products’ images are showing except for the Mackie v3! So weird.
@@thevez51 I'm probably gonna pull the trigger on a Zoom Livetrak L 12. It has a lot of pluses including being a mixer, recorder and interface. It also has scene memory and 5 separate headphone monitor mixes!
Looking atm on both the Mackie ProFX10v3 and the Yamaha MG10XU not sure which one I will end up getting tho :) will be switching to that from a Scarlett 2i2 Gen 1
Nice! This will be a great contender with the other small mixers like PreSonus StudioLive AR8 Soundcraft Notepad-8FX Allen & Heath ZED-6FX Yamaha MG06X
I just purchased this 12 channel version. I like the way you explain the unit. Can you do an instructional video on properly connecting a karaoke system in my laptop? Would like to get a good clean sound. I have purchased top quality cables and speakers. I just need some clear instruction from a professional like yourself. Thanks
Will this allow you to have individual tracks in the DAW or does it just sum everything into two tracks via USB? I’m guessing it’s the latter because I don’t see it mentioned anywhere.
I'm gonna pick this mixer up however I'm wondering if it's worth just using the USB function on this or chaining it to my audient id14 interface, does anyone have any speculation on this?
The audio quality is phenomenally clean. I see that your USB out port is vacant. For routing the mixer audio, XLR outputs were used? Where are they connected to? Please guide @sweetwater
Thanks for the video. I’ve had the Pro FX12 for years and just got the Pro FX22v3. What I didn’t realize was that there’s no equalizer sliders on the v3. I’m used to that and wondering if there’s no need or if I should tie in an equalizer. Old school here and like to really tune my live sound. Thanks!
Hi GFizz, thanks for the question! Master EQs have been phasing out of a lot of mixers lately, and I am not entirely sure why, but there are some great add-on options for you. While a standard graphic eq is nice and gives a quick fix, having a proper PA management solution can really take things to the next level. Check out the DBX DriveRacks: www.sweetwater.com/store/detail/DriveRackPA2--dbx-driverack-pa2-complete-loudspeaker-management-system They have feedback suppression, crossovers and very high fidelity EQs built in. They can even be used with an RTA mic and set your system to a target curve automatically no matter where you are! Once you use one, they are hard to part with! Let me know if you need anything else! Drake Sobehrad, Sweetwater Sales Engineer, (800) 222-4700 ext. 3271, drake_sobehrad@sweetwater.com
Hi I have a ProFX16v2 and am doing some GarageBand recording. I would love to be able to divert the USB output to my headphones. Is there a way to achieve this please? I Can do it on my low budget Wharfdale mixer which has two buttons to enable USB to go our to headphones AND/OR main. Any help really appreciated. I put down a guitar track but when I record my vocals I record the guitar track again in the background. If the guitar track could be diverted to my headphones that would be brilliant.
If I want to record 3 condenser mics out of this, which inputs do I plug it into and how do I get those mics super clear into garage band? I tried it and it was super quiet coming through my mac and couldn’t figure out why. Also I couldn’t figure out how to hear the sound from the board plugging in headphones. When I plugged them in nothing would come out
I wish Mackie would've provided more information on the one-knob compressor feature. I bought the ProFX12v3 through Sweetwater about a year ago. I'm still trying to find information on what Mackie's actual specs are (not 1 knob compressors in general) but I pretty much gave up on it. I found one online review stating "the one-knob compressors on the first four channels bring in gradual and largely non-intrusive gain reduction." Another review states: "my only criticism of the ProFX12v3’s onboard features would be the inbuilt compressor and how subtle it is. From a functionality perspective it may have almost been better served having a limiter in its place, as with the input at unity and the compressor up full, it’s still difficult to hear it having any noticeable impact on the program material." Like the reviewer, I just haven't been able to notice anything happening at all with vocals or guitars no matter where I tried setting the knob. At this price point it's a decent budget mixer, but it would be nice to have information supplied through the manufacturer on just how "suttle" a one-compressor actually is on the ProFX series. Just a last thought would be the FX presets themselves. I wish it allowed for being able to adjust delay time, etc...but again, at this price we can't have it all. Hopefully it helps the discussion as this is all meant to be constructive conversation.
Hi, Please help. In the PROFX6V3 USB, 1. How & can i record the final mix with all effects( eq, reverb, delay etc ) to PC via the USB? 2. How can i use the final mix with all effects( eq, reverb, delay etc ) to zoom meeting via the USB? 3.How many separate tracks does it record to via the USB to PC? Thanks.
What are subs? There is no clear explanation of what subs are. I have the pro 16 and it has a sub one two and a sub 3/4 and I really don't know what this means. What would I use those for? How would I use those. How about a video that explains this? That would be really nice. Thank you!
Hi Amber, great question! Your Mackie Pro FX does have a built-in 2 channel audio interface via USB (i.e. it will send only the master outputs of the mixer). If your Scarlett has more inputs and you need to make use of those, I would use the Scarlett instead. Thanks! Jason Filloramo, Sweetwater Sales Engineer, (800) 222-4700 ext. 1281, Jason_Filloramo@sweetwater.com
What if I'm using it to record drums and I have a. Room condenser mic that needs phantom power and a kick and snare mic that doesn't need phantom power? There is only 1 phantom power button.
It won't impact your mics that don't need phantom power. When engaged it will send phantom power to each input, condenser mics will recognise it and use the power while others, like dynamic mics, will essentially just ignore it
Hi Nick, can you do a video on how to connect multiple E-Drum kits to a Mackie Mixer. I have a Roland VAD 506, SPD 30 & TM-2. ,I'm trying to connect to a Mackie ProFX12 V3. thank you!
Hello, could you help me to know how to record sounds from youtube for example to the recording program of the same computer, I could not get it, thanks
Great tutorial! I have the 10 & 16. Question...can't getting individual channel levels to utility. My old Mackie 20 from 1999 had a trim. Should I just put all inputs sliders on utility? Also, if I put bass tones at 12 o'clock, there seems to be no crossover between 15 Thumps and 18 subs?
I bought the 16 track model in order to have a smaller mixer footprint in my home studio, replacing my very old Tascam 16:8:2 2600, which I may go back to now... It was a major struggle to get the MackieProFX16v3 to interface with my Windows 10 PC DAW. There is virtually no help in the manual - e.g. like explaining for instance that (i) you have to download a driver and that (ii) you have to switch off your audio interface in Windows and choose the 'Mackie USB' as your default device, and (iii) that any existing ASIO driver won't work with it - you have to go and download ASIO4ALL! How old school is that! The USB implementation seems to me to be somewhat crude; most of the controls don't work as expected when in USB2 mode (not USB3 in a 'new' model??). The audio is not anything like as clear as that through my RME Aio soundcard, so I cannot recommend this mixer for home recording use. It doesn't even have outputs for connecting to soundcard - I use subgroup 1 and 2 outs. (If you use main outs you can't hear existing tracks when recording a new track, or the existing tracks will be simply recorded again.) The desk is probably ok for use in a live band mixer setting, but not for home recording IMHO.
Marmaduke Winterbotham I just set mine up, downloaded the Mackie Driver...I’m getting input into Cubase, but no output...still trying to figure it out!
Do I need to run this mixer through an amp if I’m using this with a PA system or is the amp already built in? Also, can you send different FX to different channels or can you only use one FX across the whole board at a time?
Hi, Mikael. Great question! This mixer does not have a built-in power amp. So if you are using passive speakers, you will need one. If you are using active speakers, you will not need an amp. You can not send different FX to different channels, unfortunately. If you have any other questions, feel free to give us a call. Thanks! Jason Filloramo, Sweetwater Sales Engineer, (800) 222-4700 ext. 1281, Jason_Filloramo@sweetwater.com
Thank you for answering my question being that it was similar. I am thinking of getting Alto ts 315’s and this mixer seems great. Would that work well? I bought a korg kronos 2 so i want to upgrade my sound system for recording and live performances.
Hello, great question! The FX Preset remains wherever it was last set when you power cycle the unit (i.e. it does not reset). Thanks! Jason Filloramo, Sweetwater Sales Engineer, (800) 222-4700 ext. 1281, Jason_Filloramo@sweetwater.com
I just bought the profx10v3 The usb stream mode only works through control room or headphones but not through main outs, problem is when sent through control room won’t send to a channel strip so I can’t eq, all I have is volume control anybody else experiencing this?
make sure you change the speaker to line usb 3-4. I noticed that it cannot do it together both phones and main outs. USB 1-2 are for phones and usb only and for main outs, use usb 3-4 by pressing the button on the right top corner. You won't be able to hear phones though.
Should I buy the Mackie Mixer or a simple audio interface? I just got the akg p120 microphone - I want to record vocals and guitar.. I like the input for my electric guitar and the fact that I can record my condenser mic. .. what do you think? Any tips or recommendations?
Did you pick any of those yo´? have the very same dilema. Can´t notice if its useful to record separate tracks for a MIC and guitar, or just sends the full stereo mix via USB.
Hi My 2 Cents, good question. The SM7B is a very gain hungry mic. The preamps on the Mackie are good, but they will be turned way up to take care of the SM7B. Since it is a mixer, this can be somewhat compensated for in a live setting since you have several gain stages to work with, but for recording or podcasting/streaming, I would probably invest in a mic booster like the Cloud Lifter or the Klark Teknik. If you have any more questions, give me a ring! Drake Sobehrad, Sweetwater Sales Engineer, (800) 222-4700 ext. 3271, drake_sobehrad@sweetwater.com
do these Mackie FX units have tap tempos? Can you add more than one effect per channel? Im assuming no, after watching this video, but please chime in if you know for sure...
Hey there! Thanks for reaching out. At this time, these mixers don't include tap tempo or the ability to add more than one effect per channel. If you'd like to give me a shout at the contact info below, we can talk more about that and find you the right mixer. Rock on! 🎶🤘 Cassie O'Hanlon, Sweetwater Sales Engineer, (800) 222-4700 ext. 3020, cassie_ohanlon@sweetwater.com
Hi, Johannes. Great question! The effects send output is post fader. Thanks! Jason Filloramo, Sweetwater Sales Engineer, (800) 222-4700 ext. 1281, Jason_Filloramo@sweetwater.com
Hey guys... just purchased one of these, and I'm having a conundrum: For some reason, I can only hear USB input through control room outputs... not through the mains at all. I've tried everything... what am I doing wrong?!?! Yes, the LR is assigned ;)
@@SARAH-pk5cc YES! The USB is bidirectional on all Mackie V3 boards (which is VERY COOL!). 1/2 is USB out, and 3/4 is USB in. So, WITHIN your computer software, you need to make certain you have the correct output selected in audio routing preferences (ie channel 3,4), as well as having USB 3-4 button depressed on channel 12 of the board.
Hello, Francesco! The Pro Fx series mixers only send the stereo mix out digitally via USB. In a way, you could still multitrack with it, but only two channels at a time. I recommend looking into Mackie’s Onyx series mixers as these do allow for multitracking over USB. Thanks for the interest! Cody Kraus, Sweetwater Sales Engineer, (800) 222-4700 ext. 1766, cody_kraus@sweetwater.com
Hello, Michael! No, you cannot have different effects on different channels. Just the same effect at different levels on all channels. If you want different effects on different instruments check out some digital mixers: www.sweetwater.com/c265--Digital_Mixers Thanks for the interest! Spunde, Sweetwater Sales Engineer, (800) 222-4700 ext. 1732, Spunde@Sweetwater.com
The guy is doing something wrong. I got the profxv3 10 channel and i couldnt get it working (win10 couldnt auto install the driver) and he pointed me where to get fhe driver at, installed it and i have no issues. I monitor my microphone while using it as a sound card to get sounds from my pc. Same set up he wanted. Im not sure where he went wrong.
Another question on the 1-2 fader: does this mixer *finally* have a *stereo sub fader* ?? Like, yeah. Mackie has forever required us to use 2 sub faders so as to get a stereo mix - way, way old school. Also, for the 16 channel version - does this have two stereo sub faders, i.e. 1-2 and 3-4 ?
Hi skyfinancellc9538, great question! Yes, the ProFX V3 mixers have a dedicated Master fader for the stereo mix. The 16 channel version does have 2 stereo sub mixes in addition. If you want to dig in more, feel free to give me a shout! Drake Sobehrad, Sweetwater Sales Engineer, (800) 222-4700 ext. 3271, drake_sobehrad@sweetwater.com
Thank you. However I still can't understand what these mixers offer as far as USB *output*. Can you please detail this? I've searched online for answers but just could not find them. (That doesn't feel so good.) For example: 1.) For recording out, is the idea that can pull a USB stereo mix of the whole mixer? 2.) Are individual channels *not accessible* in the output mix? 3.) I can specify the bit width and clock rate of the output mix, up to 24 bit / 192Khz, correct? 4.) Any other details you can specify for recording-out? Thank you
Hey there! 1. Yes, the USB out is for recording the stereo mix from the mixer. Essentially, whatever you’re sending out Main L&R is going to be recorded into the computer. 2. No, individual channels are not accessible via USB. 3. Yes, you have control over the bit depth and sample rate. 4. That’s pretty much the main gist of it. It’s just going to record whatever the main stereo mix is! Feel free to reach out if you have any further questions. Nick Pasquino, Sweetwater Sales Engineer, (800) 222-4700 ext. 3230, nick_pasquino@sweetwater.com
I have a stupid question.....I have the exact same mixer and my drummer uses a wedged monitor and I prefer to use in ear monitors but we both cant seem to figure out how to give us both of them at the same time. if the 12 channel had 2 Aux outputs we wouldn't be having the issue we are having LOL. I wasn't sure if by me connecting my in ear system (Xvive U4) to the control room outputs would be ok to do
Hey there. Yes, connecting your monitors to the control room output would certainly allow the 2 of you to have separate mixes. But, the control room outputs are going to be the exact same mix that’s going to your front of house speakers. Without multiple auxiliary outputs, there isn’t a way to have 2 separate mixes from what’s running to your mains. Unless you’re running a mixer with more aux outputs, you’ll be dealing with that issue. If you want to share that same monitor mix, you could look into some sort of ¼” splitter that would allow the 2 of you to both have access to that single auxiliary output. I hope this helps! Nick Pasquino, Sweetwater Sales Engineer, (800) 222-4700 ext. 3230, nick_pasquino@sweetwater.com
Hey, Jaime! Josh here at Sweetwater… Thanks for the inquiry! Great question. There are tons of speakers that are "adaptable" to this guy. Any powered live sound monitor will work with this just fine. It comes down to what you're wanting to do moving forward. Give me a holler at my contact info below and we can chat through what you're attempting to accomplish. Josh Kattner, Sweetwater Sales Engineer, (800) 222-4700 ext. 1689, Josh_Kattner@Sweetwater.com
Hello, Wayne! That is correct, you'll be hard pressed to find any mixer that has USB inputs for USB microphones. USB microphones are intended to be plugged directly into a USB input on a computer or mobile device if the microphone supports mobile devices. Thanks for the interest! Cody Kraus, Sweetwater Sales Engineer, (800) 222-4700 ext. 1766, cody_kraus@sweetwater.com
Nice video, but this presupposes that you are familiar with mixing boards as he throws around the terminology very quickly. Is there a version for complete beginners new to mixers and their uses?
Hello, Ivan! Yes, each channel has an insert. Thanks for the interest! Kevin Spunde, Sweetwater Sales Engineer, (800) 222-4700 ext. 1732, Kevin_Spunde@Sweetwater.com
Hey Sweetwater....This guy just sold me on the Mackie ProFXV3 in the first 3 minutes of this video. Give him a commission bump wouldya....He's killin' it out here.
I love it and is it a recorder also and if so how many tracks this demo was awesome !! Ernie Flanagan here and my email is bassman6128@gmail.c...this is the best demo of a product that i have ever seen...Mackie ProFX SOLD SOLD
Yep, his effects demonstration sold it to me. Give this man a raise.
Now thats how you professionally demo a product. Straight on point! 😎👍🏼
This thing would be perfect only if had usb c!
First off-Y'all have the right man for this video.. D'Vigilio's energy and comprehensive approach to everything is very no nonesense and to the point without feeling sterile or weird. 2nd-I'm here because I just bought one of these and i can't wait to put it through it's paces.. !
Nick D'Virgilio is such a great drummer, and I love his videos for Sweetwater. This was a great video, for a super great product, and I'm definitely gonna pick one of these up!
Are there no limits to this mans talents? As always a nice presentation.
Excellent demo of the mixer and is features. Specially the effects section.
This review is legit, very informative and super chill.
Best online review of these mixers by a country mile; thank you. Based on this, I have bought one!
Bought the v2 and probably still would for my use for ceremony setup. Love having a graphic eq
thats how you demo and explain a product, amazing job
Perfect product demo 😎
Best video I have seen on this product. Excellent job and thank you!
Thanks for the initial review. Looks like a nice mixer. Would be nice to know how this stacks up as a 2 x 4 USB audio interface.
Thank you for this review - on the back of this, I bought myself one!
Great review guys. Thanks. This mixer I believe is the most budget friendly mixer with dedicated sub control. Every mixer needs it.
Excellent job on this presentation. You know the product well
Nick D'Virgilio did a great review.
I am impressed with this mixer.
I was planning on buying a Tascam 24 track recorder but I think this is way better. Way less of a learning curve and just a great little mixer. Look forward to receiving it at my door. :)
Bruh😂😂😂this is the funniest product review ever. I'm buying this simply because this man sold this on his pure talent alone😂💪🏿💪🏿
Fabulous demo!
Great video. Very informative and a professional view IMO
Great review. I am sold
SO helpful. THank you
this is soo cool i just got mine 😅 i dont regret it
I bought this same model a few days ago and it was screwed up. The faders per each channel controlled the FX and not the volume, and it didn’t register in the streaming platform I use; Mixlr. I’m returning it. But Nick, you did a great job as always.
Surprisingly stable drivers and excellent headphone amp after about a year of use I’m still loving this thing. I have the 10 channel.
How does it work with a daw?
@@bathstreetblues2588 I've tried it with ProTools and Cakewalk and it works fine. Love the ability to patch in analog gear and monitor directly with no latency. The Blend knob lets you balance DAW playback with the inputs you are recording in the phones or monitors.
@@frankcoffey im guessing it doesn't work as a daw controller, also how many of the channels can you record together, with some usb analogue desk you can only record 2 via usb? Thanks for the reply
@@bathstreetblues2588 Correct, it’s not a control surface. The USB lets you record only two tracks at a time.
This brother could sell ice cubes to an Eskimo
Fantastic Job Bro Thank u ❤
Bety Nice explanatio. Good.
Thanks, great news! Small note: in your website, the product images are not visible maybe for some tech reason. All other products’ images are showing except for the Mackie v3! So weird.
WoOow wonderful review dear
I bought one just this month and I LOVE IT!
i know ✌️😎
Can you use different effects on every channel and turn them off on the channels.
@@jerbear1601 no, only one effect but you can switch off the effect on every channel.
@@thevez51 I'm probably gonna pull the trigger on a Zoom Livetrak L 12. It has a lot of pluses including being a mixer, recorder and interface. It also has scene memory and 5 separate headphone monitor mixes!
@@jerbear1601 I thought about the Zoom Mixer as well, but I wanted more manual control over mix minus set up.
Nick D’Virgillio has played more instruments than the Boston Pops Orchestra in these Sweetwater videos! Impressive!
Yeah!👍🏻🔥😉 I have Mackie ONYX 2x2 preamp & now I’d like to buty this nice Mackie PROFX10 v3!🎹🎵📀🎧😃👌🏻 BR Guys🤜🏻
I like!
❤ thank you 😊
When he sang "hey, yeah, yeah"...I feel that
Looking atm on both the Mackie ProFX10v3 and the Yamaha MG10XU not sure which one I will end up getting tho :) will be switching to that from a Scarlett 2i2 Gen 1
Just bought one, waiting for delivery.
Nice! This will be a great contender with the other small mixers like
PreSonus StudioLive AR8
Soundcraft Notepad-8FX
Allen & Heath ZED-6FX
Yamaha MG06X
I know someone who owns a Soundcraft 8FX. It will not work right at all on Windows 10 but works fine on his Mac Pro.
@@OnlineMD for windows 10 an update was released to fix the problem so i guess it would work fine already.
Which mixer is the Best among all these?
PreSonus StudioLive AR8
Soundcraft Notepad-8FX
Allen & Heath ZED-6FX
Yamaha MG06X
Mackie ProFX v3 -
Heyeee Yea Yeahhhh
0:15
Lol made you look! :D
Just kidding, great demo video as always!
this dudes having fun
yeah i mean you can't blame him it is fun indeed 😂
5:12
I came for the mixer & stayed for the shtick
How about a review and walk through of the ProFX10V3 - it is somewhat different and looks like it would also be good for PodCasters or live Stream.
Thanks
This is the mixer i've ever heard where I actually want to use the FX settings.
I just purchased this 12 channel version. I like the way you explain the unit. Can you do an instructional video on properly connecting a karaoke system in my laptop? Would like to get a good clean sound. I have purchased top quality cables and speakers. I just need some clear instruction from a professional like yourself. Thanks
Richard Bloemker what he said
I do wish you could have the feature of being able to save presets even thought this an analog mixer.
Will this allow you to have individual tracks in the DAW or does it just sum everything into two tracks via USB? I’m guessing it’s the latter because I don’t see it mentioned anywhere.
I think sir, you personally enjoyed turning up the bass knob!!! lol.
Awesome guy haha
in Germany we say " GEILES VIDEO und GEILES TEIL " i think will order 1
I would like to know what’s difference between 1/2 and 3/4?
I'm gonna pick this mixer up however I'm wondering if it's worth just using the USB function on this or chaining it to my audient id14 interface, does anyone have any speculation on this?
Enjoyed the review 😁. I have one doubt, can I use this mixer to increase depth in my voice??
The audio quality is phenomenally clean. I see that your USB out port is vacant. For routing the mixer audio, XLR outputs were used? Where are they connected to?
Please guide @sweetwater
I went with the Allen and Heath Zed so I could record 4x4 into my computer. im surprised these new mixers dont have more inputs into USB
zed was made more specifically for usb
OHHH YEAAHHH YEAHHH....UH HAHHHH YEAHHHHHH...SMILEY FACING DAH BASS
Thanks for the video. I’ve had the Pro FX12 for years and just got the Pro FX22v3. What I didn’t realize was that there’s no equalizer sliders on the v3. I’m used to that and wondering if there’s no need or if I should tie in an equalizer. Old school here and like to really tune my live sound. Thanks!
Hi GFizz, thanks for the question! Master EQs have been phasing out of a lot of mixers lately, and I am not entirely sure why, but there are some great add-on options for you. While a standard graphic eq is nice and gives a quick fix, having a proper PA management solution can really take things to the next level. Check out the DBX DriveRacks:
www.sweetwater.com/store/detail/DriveRackPA2--dbx-driverack-pa2-complete-loudspeaker-management-system
They have feedback suppression, crossovers and very high fidelity EQs built in. They can even be used with an RTA mic and set your system to a target curve automatically no matter where you are! Once you use one, they are hard to part with!
Let me know if you need anything else!
Drake Sobehrad, Sweetwater Sales Engineer, (800) 222-4700 ext. 3271, drake_sobehrad@sweetwater.com
Hi I have a ProFX16v2 and am doing some GarageBand recording. I would love to be able to divert the USB output to my headphones. Is there a way to achieve this please? I Can do it on my low budget Wharfdale mixer which has two buttons to enable USB to go our to headphones AND/OR main. Any help really appreciated. I put down a guitar track but when I record my vocals I record the guitar track again in the background. If the guitar track could be diverted to my headphones that would be brilliant.
If I want to record 3 condenser mics out of this, which inputs do I plug it into and how do I get those mics super clear into garage band? I tried it and it was super quiet coming through my mac and couldn’t figure out why. Also I couldn’t figure out how to hear the sound from the board plugging in headphones. When I plugged them in nothing would come out
I wish Mackie would've provided more information on the one-knob compressor feature. I bought the ProFX12v3 through Sweetwater about a year ago. I'm still trying to find information on what Mackie's actual specs are (not 1 knob compressors in general) but I pretty much gave up on it.
I found one online review stating "the one-knob compressors on the first four channels bring in gradual and largely non-intrusive gain reduction." Another review states: "my only criticism of the ProFX12v3’s onboard features would be the inbuilt compressor and how subtle it is. From a functionality perspective it may have almost been better served having a limiter in its place, as with the input at unity and the compressor up full, it’s still difficult to hear it having any noticeable impact on the program material."
Like the reviewer, I just haven't been able to notice anything happening at all with vocals or guitars no matter where I tried setting the knob. At this price point it's a decent budget mixer, but it would be nice to have information supplied through the manufacturer on just how "suttle" a one-compressor actually is on the ProFX series.
Just a last thought would be the FX presets themselves. I wish it allowed for being able to adjust delay time, etc...but again, at this price we can't have it all. Hopefully it helps the discussion as this is all meant to be constructive conversation.
Hi, Please help.
In the PROFX6V3 USB,
1. How & can i record the final mix with all effects( eq, reverb, delay etc ) to PC via the USB?
2. How can i use the final mix with all effects( eq, reverb, delay etc ) to zoom meeting via the USB?
3.How many separate tracks does it record to via the USB to PC?
Thanks.
only two tracks
What are subs? There is no clear explanation of what subs are. I have the pro 16 and it has a sub one two and a sub 3/4 and I really don't know what this means. What would I use those for? How would I use those. How about a video that explains this? That would be really nice. Thank you!
Does this board add a little more kick to the mv7 mic
Great video. Do I need to use my Mackie Pro FX with a scarlett audio interface? Thanks
Hi Amber, great question! Your Mackie Pro FX does have a built-in 2 channel audio interface via USB (i.e. it will send only the master outputs of the mixer). If your Scarlett has more inputs and you need to make use of those, I would use the Scarlett instead.
Thanks!
Jason Filloramo, Sweetwater Sales Engineer, (800) 222-4700 ext. 1281, Jason_Filloramo@sweetwater.com
What if I'm using it to record drums and I have a. Room condenser mic that needs phantom power and a kick and snare mic that doesn't need phantom power? There is only 1 phantom power button.
It won't impact your mics that don't need phantom power. When engaged it will send phantom power to each input, condenser mics will recognise it and use the power while others, like dynamic mics, will essentially just ignore it
Hi Nick, can you do a video on how to connect multiple E-Drum kits to a Mackie Mixer. I have a Roland VAD 506, SPD 30 & TM-2. ,I'm trying to connect to a Mackie ProFX12 V3.
thank you!
Hello, could you help me to know how to record sounds from youtube for example to the recording program of the same computer, I could not get it, thanks
Sounds perfect just make sure obs monitor is off unless your trying to broadcast like on Sams.
Great tutorial! I have the 10 & 16. Question...can't getting individual channel levels to utility. My old Mackie 20 from 1999 had a trim. Should I just put all inputs sliders on utility? Also, if I put bass tones at 12 o'clock, there seems to be no crossover between 15 Thumps and 18 subs?
I want to keep bass and bass drum out of the Thumps
I bought the 16 track model in order to have a smaller mixer footprint in my home studio, replacing my very old Tascam 16:8:2 2600, which I may go back to now... It was a major struggle to get the MackieProFX16v3 to interface with my Windows 10 PC DAW. There is virtually no help in the manual - e.g. like explaining for instance that (i) you have to download a driver and that (ii) you have to switch off your audio interface in Windows and choose the 'Mackie USB' as your default device, and (iii) that any existing ASIO driver won't work with it - you have to go and download ASIO4ALL! How old school is that! The USB implementation seems to me to be somewhat crude; most of the controls don't work as expected when in USB2 mode (not USB3 in a 'new' model??). The audio is not anything like as clear as that through my RME Aio soundcard, so I cannot recommend this mixer for home recording use. It doesn't even have outputs for connecting to soundcard - I use subgroup 1 and 2 outs. (If you use main outs you can't hear existing tracks when recording a new track, or the existing tracks will be simply recorded again.) The desk is probably ok for use in a live band mixer setting, but not for home recording IMHO.
Marmaduke Winterbotham I just set mine up, downloaded the Mackie Driver...I’m getting input into Cubase, but no output...still trying to figure it out!
Do I need to run this mixer through an amp if I’m using this with a PA system or is the amp already built in? Also, can you send different FX to different channels or can you only use one FX across the whole board at a time?
Hi, Mikael. Great question! This mixer does not have a built-in power amp. So if you are using passive speakers, you will need one. If you are using active speakers, you will not need an amp. You can not send different FX to different channels, unfortunately. If you have any other questions, feel free to give us a call. Thanks!
Jason Filloramo, Sweetwater Sales Engineer, (800) 222-4700 ext. 1281, Jason_Filloramo@sweetwater.com
Thank you for answering my question being that it was similar. I am thinking of getting Alto ts 315’s and this mixer seems great. Would that work well? I bought a korg kronos 2 so i want to upgrade my sound system for recording and live performances.
Thank you for the review video.
Would like to know if the effects settings is reset each time the unit is switched off?
Hello, great question! The FX Preset remains wherever it was last set when you power cycle the unit (i.e. it does not reset).
Thanks!
Jason Filloramo, Sweetwater Sales Engineer, (800) 222-4700 ext. 1281, Jason_Filloramo@sweetwater.com
I just bought the profx10v3 The usb stream mode only works through control room or headphones but not through main outs, problem is when sent through control room won’t send to a channel strip so I can’t eq, all I have is volume control anybody else experiencing this?
make sure you change the speaker to line usb 3-4. I noticed that it cannot do it together both phones and main outs. USB 1-2 are for phones and usb only and for main outs, use usb 3-4 by pressing the button on the right top corner. You won't be able to hear phones though.
When will these mixers have HDMI or fiber optic input & bluetooth?
How do you plug RCA jacks into this????
All my audio equipment uses RCA jacks
Can I use this for gaming like PS4 and recording audio in to my Adobe Audition.
I would imagine you could. Dont see why not.
Should I buy the Mackie Mixer or a simple audio interface? I just got the akg p120 microphone - I want to record vocals and guitar.. I like the input for my electric guitar and the fact that I can record my condenser mic. .. what do you think? Any tips or recommendations?
Did you pick any of those yo´? have the very same dilema. Can´t notice if its useful to record separate tracks for a MIC and guitar, or just sends the full stereo mix via USB.
@@thesiamface I bought the Audio Interface
Do you still need the cloud lifter for that mic on this mixer? How much headroom is there without a lifter and that mic?
Hi My 2 Cents, good question. The SM7B is a very gain hungry mic. The preamps on the Mackie are good, but they will be turned way up to take care of the SM7B. Since it is a mixer, this can be somewhat compensated for in a live setting since you have several gain stages to work with, but for recording or podcasting/streaming, I would probably invest in a mic booster like the Cloud Lifter or the Klark Teknik.
If you have any more questions, give me a ring!
Drake Sobehrad, Sweetwater Sales Engineer, (800) 222-4700 ext. 3271, drake_sobehrad@sweetwater.com
Why not show this with a Roland Td27 kit and SD3?im looking for thr right mixer for my kit
do these Mackie FX units have tap tempos? Can you add more than one effect per channel? Im assuming no, after watching this video, but please chime in if you know for sure...
Hey there! Thanks for reaching out. At this time, these mixers don't include tap tempo or the ability to add more than one effect per channel. If you'd like to give me a shout at the contact info below, we can talk more about that and find you the right mixer.
Rock on! 🎶🤘
Cassie O'Hanlon, Sweetwater Sales Engineer, (800) 222-4700 ext. 3020, cassie_ohanlon@sweetwater.com
Is the effects send pre or post fader, meaning, is it possible to have the effects output only without the original signal in the mix?
Hi, Johannes. Great question! The effects send output is post fader.
Thanks!
Jason Filloramo, Sweetwater Sales Engineer, (800) 222-4700 ext. 1281, Jason_Filloramo@sweetwater.com
Hey guys... just purchased one of these, and I'm having a conundrum: For some reason, I can only hear USB input through control room outputs... not through the mains at all. I've tried everything... what am I doing wrong?!?! Yes, the LR is assigned ;)
Do you have USB3-4 pushed in on 11-12 panel?
I have the same issue can’t find anything about it anywhere
Did you solve the prob?
@@SARAH-pk5cc YES! The USB is bidirectional on all Mackie V3 boards (which is VERY COOL!). 1/2 is USB out, and 3/4 is USB in. So, WITHIN your computer software, you need to make certain you have the correct output selected in audio routing preferences (ie channel 3,4), as well as having USB 3-4 button depressed on channel 12 of the board.
Excellent review. Is it possible to do a multi-track recording into a DAW with it?
Hello, Francesco! The Pro Fx series mixers only send the stereo mix out digitally via USB. In a way, you could still multitrack with it, but only two channels at a time. I recommend looking into Mackie’s Onyx series mixers as these do allow for multitracking over USB.
Thanks for the interest!
Cody Kraus, Sweetwater Sales Engineer, (800) 222-4700 ext. 1766, cody_kraus@sweetwater.com
When you turn effects on is that for all devices? In other words can you have bass with distortion and voice with reverb
Hello, Michael! No, you cannot have different effects on different channels. Just the same effect at different levels on all channels. If you want different effects on different instruments check out some digital mixers:
www.sweetwater.com/c265--Digital_Mixers
Thanks for the interest!
Spunde, Sweetwater Sales Engineer, (800) 222-4700 ext. 1732, Spunde@Sweetwater.com
@@sweetwater thank you
There is negative review on Amazon about the USB with Windows 10, can you clear that up for us?
The guy is doing something wrong. I got the profxv3 10 channel and i couldnt get it working (win10 couldnt auto install the driver) and he pointed me where to get fhe driver at, installed it and i have no issues. I monitor my microphone while using it as a sound card to get sounds from my pc. Same set up he wanted. Im not sure where he went wrong.
@@Faithfps where did he point you to download the win 10 driver please?
@@djresqvideomix on an amazon review
Another question on the 1-2 fader: does this mixer *finally* have a *stereo sub fader* ?? Like, yeah. Mackie has forever required us to use 2 sub faders so as to get a stereo mix - way, way old school. Also, for the 16 channel version - does this have two stereo sub faders, i.e. 1-2 and 3-4 ?
Hi skyfinancellc9538, great question! Yes, the ProFX V3 mixers have a dedicated Master fader for the stereo mix. The 16 channel version does have 2 stereo sub mixes in addition.
If you want to dig in more, feel free to give me a shout!
Drake Sobehrad, Sweetwater Sales Engineer, (800) 222-4700 ext. 3271, drake_sobehrad@sweetwater.com
Thank you. However I still can't understand what these mixers offer as far as USB *output*. Can you please detail this? I've searched online for answers but just could not find them. (That doesn't feel so good.) For example:
1.) For recording out, is the idea that can pull a USB stereo mix of the whole mixer?
2.) Are individual channels *not accessible* in the output mix?
3.) I can specify the bit width and clock rate of the output mix, up to 24 bit / 192Khz, correct?
4.) Any other details you can specify for recording-out?
Thank you
Hey there!
1. Yes, the USB out is for recording the stereo mix from the mixer. Essentially, whatever you’re sending out Main L&R is going to be recorded into the computer.
2. No, individual channels are not accessible via USB.
3. Yes, you have control over the bit depth and sample rate.
4. That’s pretty much the main gist of it. It’s just going to record whatever the main stereo mix is!
Feel free to reach out if you have any further questions.
Nick Pasquino, Sweetwater Sales Engineer, (800) 222-4700 ext. 3230, nick_pasquino@sweetwater.com
I have a stupid question.....I have the exact same mixer and my drummer uses a wedged monitor and I prefer to use in ear monitors but we both cant seem to figure out how to give us both of them at the same time. if the 12 channel had 2 Aux outputs we wouldn't be having the issue we are having LOL. I wasn't sure if by me connecting my in ear system (Xvive U4) to the control room outputs would be ok to do
Hey there. Yes, connecting your monitors to the control room output would certainly allow the 2 of you to have separate mixes. But, the control room outputs are going to be the exact same mix that’s going to your front of house speakers.
Without multiple auxiliary outputs, there isn’t a way to have 2 separate mixes from what’s running to your mains. Unless you’re running a mixer with more aux outputs, you’ll be dealing with that issue.
If you want to share that same monitor mix, you could look into some sort of ¼” splitter that would allow the 2 of you to both have access to that single auxiliary output.
I hope this helps!
Nick Pasquino, Sweetwater Sales Engineer, (800) 222-4700 ext. 3230, nick_pasquino@sweetwater.com
What type of speakers are adaptable to this mixer? Can you suggest any? Can this be used in a gig?
Hey, Jaime! Josh here at Sweetwater… Thanks for the inquiry! Great question. There are tons of speakers that are "adaptable" to this guy. Any powered live sound monitor will work with this just fine. It comes down to what you're wanting to do moving forward. Give me a holler at my contact info below and we can chat through what you're attempting to accomplish.
Josh Kattner, Sweetwater Sales Engineer, (800) 222-4700 ext. 1689, Josh_Kattner@Sweetwater.com
It appears that you cannot plug a usb mic directly into this Mackie V3 mixer. Correct?
Hello, Wayne! That is correct, you'll be hard pressed to find any mixer that has USB inputs for USB microphones. USB microphones are intended to be plugged directly into a USB input on a computer or mobile device if the microphone supports mobile devices.
Thanks for the interest!
Cody Kraus, Sweetwater Sales Engineer, (800) 222-4700 ext. 1766, cody_kraus@sweetwater.com
Nice video, but this presupposes that you are familiar with mixing boards as he throws around the terminology very quickly. Is there a version for complete beginners new to mixers and their uses?
could i connect a turntable to this with phono?
Could you use this Mackie mixer on a drum set just to how it sound like.
If you think of it as being a sub group, yes.
Does anybody know if this new series of mixers are compatible with iPad?
good question
How do this Mackie ProFX v3 series compare to the Yamaha MG series? Which one would you choose and why?
watch ketnner creatives channel he made a video about it,i t’s awesome
does it have inserts to route eq and compressor ?? if not , can you recomend one with usb and inserts ??? greetings
Hello, Ivan! Yes, each channel has an insert.
Thanks for the interest!
Kevin Spunde, Sweetwater Sales Engineer, (800) 222-4700 ext. 1732, Kevin_Spunde@Sweetwater.com
Man, Jon Lovitz really has sunk to an all-time low.
Any provision for mix-minus?