Great tool! I've been sharpening bits on a grinder for decades and I'm pretty good at it, but this thing does it perfectly in a fraction of the time. I just sharpened about 40 bits in no time with no issues on my first use, super happy with it.
Not enough information and how it works, also we need a test of old drill bit after sharpening the bit ? the camera man not showing us the importing process !
Does it matter what direction you turn the bit do you have to turn it clockwise or counterclockwise would like to know before I destroy a very expensive bit
I owned a blue one 10 years ago. I gotta say it was the biggest piece of shit in my garage. I'm going to give you guys another chance, buying the 500 as I type this. It better blow my skirt up or I'll be coming back.
I bought the 750x and put it to work. I gotta say the instructions kinda suck. Took me a few hours of putzing with it to make it sing. It proved it's worth many times this weekend and I'm now a believer. It's not faster than doing twist bits on the grinder, but it's much more accurate with less brain power. It's a keeper. I see that AvE shares my same opinion of the blue ones. czcams.com/video/xDOlPMEC7IU/video.html
I have a DD & can't get it to work for me. Called the phone # & they were not help full @ all. Was told no dealer or help in this area. It grineds the edge backwords w/ a reverce angle. Where can I get help on how to use it?
I am having the same issues, it’s a piece of crap and all the drills were sharpened backwards. It’s cutting the back end of the flute. Probably going to return it tomorrow
I would have expected a video with this lack of quality/closeups from a DIY, but not from the manufacturer. Come on Drill Doctor, you make a quality product, follow up with quality video!! Thumbs down.
A left hand chuck is available separately for the XP, 500X, and 750X models. The Left Hand Chuck sharpens left hand (reverse twist) bits from 3/32" to 1/2" (part number DA02105PF). www.drilldoctor.com/da02105pf.html
For someone who just purchased the 750X this video was not helpful you said nothing about opening the chuck to insert the bit, there are no degree marks? You work for the company but for the average consumer newby this was not helpful. The DIY guys are more detailed ☹️
This video is not much better than the confusing instruction manual that came with the tool . He only really covers 'how to ' for a 118 degree bit . What is the alignment port setting for a 135 degree split point ? So much missing here !!
Had one, motor is not good, underpowered poor quality.Spring system for referencing on flutes is not positive. It is overpriced and , like mine, does not last long only okay for casual day.
The video is worthless. No real detail, no explanation of why the 118 or 135, poor demonstration of the pawls, just plain bad. We are sure you know ALL this stuff. Good for you. (and I mean Darex, not the poor kid). No quality control by management. Actually I do not care if you know all this information. I care that I do not!
After decades of procrastination I went ahead and bought the 750X today so I can sharpen my bit set.
I dont need a sales pitch. I already have one. What I need is a good refresher video on how to use it!
Thanks for not showing the end result! Unreal
As Others say, "How About Some CLOSEUPS?" (Like OMG) However, I DO LIKE that you keep it under four minutes.
Bought a 500 and it works great. Strange that you did not mention there's an optional chuck for the 500 that will take up to 3/4 drill bits.
Great tool! I've been sharpening bits on a grinder for decades and I'm pretty good at it, but this thing does it perfectly in a fraction of the time. I just sharpened about 40 bits in no time with no issues on my first use, super happy with it.
I have never been able to get my bit sharp enough to use it on my Drill Doctor500x. I think I got on that was made on a Friday.
Thank you 🙏
I love mine, it does GREAT !!!!
Great video. I find that I have to use the "full rake" position when setting the bit in the chuck, but I love the results!
Short and to the point - fantastic. I just got the 750X and love it already.
Not enough information and how it works, also we need a test of old drill bit after sharpening the bit ? the camera man not showing us the importing process !
No close ups so I still do not know how to use it.
Does it matter what direction you turn the bit do you have to turn it clockwise or counterclockwise would like to know before I destroy a very expensive bit
💥💥 thanks for the great demo. 3:28 why does it sound like the motor is so weak that it is about to stall when the bit contacts the stone.?? 🤟🏼
I receiver a email that my grinding wheel is install incorrectly, so what do i do to correct the problem? Drill Docker is no help. Thanks Bruce Boyles
How do you remove the grinder wheel
How often do u have to replace the wheel?
That "shop" background looks so spontaneous and unstaged
You mean you don't keep your screw drivers over your head and so high you have to struggle to remove them? 🤣
a closer focus would be nice
I owned a blue one 10 years ago. I gotta say it was the biggest piece of shit in my garage. I'm going to give you guys another chance, buying the 500 as I type this. It better blow my skirt up or I'll be coming back.
I bought the 750x and put it to work. I gotta say the instructions kinda suck. Took me a few hours of putzing with it to make it sing. It proved it's worth many times this weekend and I'm now a believer. It's not faster than doing twist bits on the grinder, but it's much more accurate with less brain power. It's a keeper. I see that AvE shares my same opinion of the blue ones.
czcams.com/video/xDOlPMEC7IU/video.html
I have a DD & can't get it to work for me. Called the phone # & they were not help full @ all. Was told no dealer or help in this area. It grineds the edge backwords w/ a reverce angle. Where can I get help on how to use it?
+Bruce Boyles Looks like the factory installed the grinding wheel incorrectly, I heard it happens a lot.
I am having the same issues, it’s a piece of crap and all the drills were sharpened backwards. It’s cutting the back end of the flute. Probably going to return it tomorrow
Dang, just before throwing mine out the door I saw this. What a waste of money...
drill bit
I would have expected a video with this lack of quality/closeups from a DIY, but not from the manufacturer. Come on Drill Doctor, you make a quality product, follow up with quality video!! Thumbs down.
Does it work on left hand drill bits?
A left hand chuck is available separately for the XP, 500X, and 750X models. The Left Hand Chuck sharpens left hand (reverse twist) bits from 3/32" to 1/2" (part number DA02105PF). www.drilldoctor.com/da02105pf.html
For someone who just purchased the 750X this video was not helpful you said nothing about opening the chuck to insert the bit, there are no degree marks? You work for the company but for the average consumer newby this was not helpful. The DIY guys are more detailed ☹️
Tss
This video is not much better than the confusing instruction manual that came with the tool . He only really covers 'how to ' for a 118 degree bit . What is the alignment port setting for a 135 degree split point ? So much missing here !!
Not good detail of the position being shown very poor demo.
Great tool, not very good video for a couple reasons :(
Had one, motor is not good, underpowered poor quality.Spring system for referencing on flutes is not positive.
It is overpriced and , like mine, does not last long only okay for casual day.
The video is worthless. No real detail, no explanation of why the 118 or 135, poor demonstration of the pawls, just plain bad. We are sure you know ALL this stuff. Good for you. (and I mean Darex, not the poor kid). No quality control by management. Actually I do not care if you know all this information. I care that I do not!
I will NOT listen to a 2.1/2 minute advertisement for Summit Racing just to watch this video. Bullcrap!
Useless.