3rd Gen 4Runner on 37's - Do They Rub? Build Walkaround of my 2001 Toyota 4Runner
Vložit
- čas přidán 29. 08. 2024
- In this video, I do a walk around on my 3rd gen Toyota 4Runner on 37s. This is my first ever video where I put myself in front of the camera, so go easy on me!
Note: I also forgot to mention that I am running a Tundra Brake Updgrade! They are the 231mm 13WL Brake calipers with OEM rotors and brake pads obtained on amazon.
Don’t forget to Like, Comment and Subscribe!
If you have any other questions, please ask them in the comments! I’ll get to them quickly.
Follow me on instagram @snowboundt4r
~~~~~~Build List Updated July 6 2022~~~~~~~
Interior:
ARB Air Lockers and ARB Compressor: amzn.to/3uUFc1r
Dashcam/Mirror: amzn.to/3v8ut4I
Rear Facing Camera Mount: snowboundcusto...
Pioneer Headunit: amzn.to/3FsStmP
Subwoofer: JL 10w1v3
Amplifier: amzn.to/394yJts
Rear Hatch Struts: amzn.to/3N2asTv
Washer Reservoir Relocation: snowboundcusto...
Drawer and Custom Subwoofer Box: snowboundcusto...
Set Power AJ 30 Fridge: amzn.to/3DIPful
Set Power Fridge Slide: amzn.to/3ypmJ0h
Jackery 500W Power Supply: amzn.to/3xcGFmF
Kinetic Recovery Rope and Soft Shackle: www.spartanrop...
Suspension:
Front Coil-overs: snowboundcusto...
Rear Shocks: snowboundcusto...
Rear Coils: FJZ-80 Front 7.5 Wraps
Front Upper Control Arms SPC: amzn.to/3yoLSGD
SPC P/N: 25390 Rear Upper Link
SPC P/N: 25945 Rear Lower Link
Timbren Bumpstops
Armor:
Nguyen Works Rear Bumper: nguyenworksusa...
Shrockworks Rock-sliders
Addicted Offroad Front Bumper
Doc Offroad Skid Plates: DM on IG
Rear Shock Guard: snowboundcusto....
Eimkeith PCK, LLR and ULR
Lighting:
Headlights: snowboundcusto...
Taillights: amzn.to/3N6daYn
Diode Dynamics Light Pods: amzn.to/3ubbOEQ
Wheels:
Falcon Offroad Wheels T7
1.25” Spidertrax Wheelspacers: amzn.to/3O2d4lV
Song: / genes-x-memphis-eternity
Super cool to see you on CZcams! Your 4Runner breaks so many rules for what I normally like, but is still one of my favorite builds! Looking forward to seeing more.
Dope Runner man. I’ve been slowly building one up for the last 5 years. 2 kids will change priorities. Watching your videos definitely motivates me to get back on it. I’ll be in contact with you in some products you provide.
This 4runner is the inspiration behind the one I just bought a couple weeks ago. Been looking for a video on it everywhere. So far I’ve only seen videos. It just looks so good!
Glad you made it here!
Nice video. Can’t wait to see more. Hopefully some trail runs.
Absolutely! I 100% want to make some trail run videos. Gotta tub the firewall first though lol
If you install solo motorsports stock length lower control arms and SPC adjustable upper control arms you can move the front wheel forward an inch before you start running into steering rack issues.
Hey man,
You truck is a beast. Love it.
You seem humble and down to earth which is equally rare and refreshing to see in these days.
Be blessed.
Cheers!!!!
I Did Subscribe and hit like. Keep up the good work.
Thanks for that!
@@SnowboundCustoms
Cheers and best of luck.
This 4runner is way to beautiful! 😍
I’m very glad to see your on CZcams I’ve been following you on Instagram since the start
Thanks for coming here! I do plan to upload more soon
Sweet rig bro 2:44 spool that don’t get bound up and cut off a limb...
Flexing on us other 3rd gen owners with the working clock
Hahaha
Looks clean. Like it.
Nice to finally see a walk around of this 4Runner! Killing the game man🔥
Thanks a lot! I’ve been procrastinating way too long on this video lol
Cool rig.
Thank you!
I hope to one day have a build this badass, I have a 90 4runner with a 3.0, love it to death! Lol
It takes time! You’ll get there
Nice truck and video man! It’s nice to be able to see the man behind the build lol
Thanks! Ya it’s nice to know who owns the rigs lol
So badass bro!!!
Dude thanks!
nice rig dawg!
Nice runner man!
Thank you!
Ayy you chose Snowbound Customs! Your 3rd gen looks killer on video.
Ya I did! Eventually I’m going to go back to my story to figure out who gave me that name once I get merch made haha
Looks great, Keep the vids coming!!!
I follow you on tictok. I love this rig. I have a 97 runner that I hope one day will be as nice as yours.
Let's pump up the algorithm!!
Haha thanks a lot
I live your Toyota 4Runner
Nice ride!
Thank you!
Great now I need 35 s on my 4runner now
Body mount chops can be sketchy, you may want to just get some lower control arms from solo motorsports. They move your wheel 1" forward...essentially making your 37's fit like a 35. Epic rig tho!
Already did the BMC now along with a tub. Going to combine it with some SPC UCAs eventually to move the tire forward a bit
Great build!
2.5 radflos all the way!
I kinda wonder how much of a difference it makes!
@@SnowboundCustoms want to drive mine?
@@ever2gut1 after I get mine tubbed to go on a trail lol
Really good
Cool to see a face linked to the rig! Love the truck brother
Thanks! More coming soon hopefully
Great job and video toyota gang gang
Nice rig man. Looks awesome. Your turn signal do there have a relay? Thinking about buying one from SRQ.
Yup sure does
Next time you drop the skid have someone burn a 4 inch hole to access the engine and tranny plugs
Perfection
Nice, truck!!
Thanks a lot 💪🏻
Your 4runner looks amazing. Great video. What was the link for the raibguards again?
Just do a 2in body lift and you probably won't have to chop as much in the back. Seems more practical.
Trying to avoid a bodylift! Also I just uploaded a video doing exactly that, chopping the back up lol
🔥🔥
Dope rig my man. Keep up the good work. I just want to install 35's is there any way I can get away without chopping anything. I'm running spc uca 2 1/2" suspension lift. No body lift.
You’ll definitely want to at least hammer down the pinch weld! If you’re driving on the streets it should be okay
man im loving it, do you plan to sell somewhere down the line? would totally buy
Bonitos videos saludos desde Honduras
Bro it looks awesome how much did you spend on that 4runner ? I have one 1996 3rz fully stock. No dents on the body
Nice truck! What's going on with the ziptie on the headlight? I thought maybe I was the only one experiencing problems with aftermarket headlight housings
I built these headlights about 2 years ago now and the little clip on the top right that holds the headlight to the back plastic piece wire out and now it won’t stay in. I tried using jb weld to hold it in which failed so now I’m going to have to get that little plastic piece from somewhere. Thanks for bringing that up! I totally forgot about it.
@@SnowboundCustoms for sure! I’m shaving that same problem.. I used my old piece from my old headlights and it worked for a while but with the heavy off-roading I do it broke too. Back to the zip ties until I thread a bolt through that hole..
El de tiktok ufff que bellisimooooooooooo
Do you have stock spindles and ball joints? Or did you upgrade to heims on upper or lower? Custom UCA? If all stock, how has the ball joints and stock spindle held up to the 37s? I know with the Toyota spindles being forged steel(4th gen), they're pretty tough. But ball joints tend to be a major failure point on the 4th gens atleast
Sick! Have you thought of dual transfer case?
Absolutely. One day but today is not that day lol
Snowbound Customs hell yeah same here lol
just out of curiosity why 37s? 35's are already huge for me.. The most i'd go on mine is 33's. but i'd need a little bit of a lift for that. Either way thought your 4runner looks SICK.
Here’s the thing. 35s look huge now but once you put them on, they start to look small. So ya, that’s why 😂
@@SnowboundCustoms you have tire dysmorphia. it's like body dysmorphia but instead of your muscles, your 4runner wheels will never be big enough 🤣
Quick question about the lift kit, looking to order the same kit from Sonoran with the 2.5 coils, is the kit plug & play or will I need to source other parts? Thanks in advance
-12 off set doesn't look that bad. I wish they makes-25 off set
Same actually
If you had to take a rough estimate of your mods, how much did it cost you you think? I’m wondering how much I would have to spend to get my 4Runner looking like that.
The most expensive part was gears and lockers ~ about $4k total with the compressor. Everything else was another $4k
What year it’s that Runner??? Thanks
2001, sorry for late reply lol
Are the turn signals plug and play or did it take a bit of re wiring?
Just cut off the old turn signal wires and connected the new ones. It was only two wires to attach
I am looking for a pair of headlights like that led, please help me where I can buy my 4runner is year 97
Here you go: snowboundcustoms.shop/products/96-02-3rd-gen-4runner-led-retrofit-headlights
What was the mpg difference like changing from 35s to 37s, also were you running the 5.29 gearing with 35s?
I still haven’t had the chance to check it out. I think it went from 14 to 12/13. I’ll see when I fill up again and yes I had the 5.29s with 35s!
👏🏽👏🏽👏🏽👏🏽👏🏽
Whats the 20% discount code…??
Have you had any trouble with your e brake cable when flexed out
What’s happening to yours? I haven’t had problems
@@SnowboundCustoms I bought an 01 an it was built about like yours with 35s an I noticed the e brake didn't work so I checked on it an it was all unhooked in the drums and I saw a video that I can't find now of another guy that had to-do some mods on his cables... I just hooked it up today an haven't tried it but I saw yours an thought I would ask
What gear size do you have ?
What camera u using to take pictures of ur car
I use a Nikon D600 with a 70-200mm lens but for video I mostly film with my iPhone 12 Pro!
Thank u nice rig tho 🔥💯💯
How are you wearing jeans in this weather? 😟
Sheeeshh
Roughly how much would you say you put in for the total build?
Probably $9k total? Lockers are 3.5k, wheels/tires 3k and then everything else
@@SnowboundCustoms who did your gears? Also, did you do front and rears?
@@raulbeltra4765 East coast gear supply and yes! You have to do front and rear together
Where you get your bumper from?
It’s an addicted offroad tube bumper
Hey where I can get those savage skid plates?
They went out of business unfortunately
@@SnowboundCustoms ahh thx for let me know
Was is rubbing in the rear at all with 35’s?
Yes it was. Probably a 1” body lift would have taken care of it. If I had less offset they would’ve tucked under the fenders
@@SnowboundCustoms I have a 96 4runner and ordered a 2.5 inch icon lift, you think imma have to tub the fenders?
@@lizardkidd801 that really depends on how much your wheels are sticking out. With the 35s I had a 16x8 -25mm offset wheel and a 1.25” wheel spacer and that rubbed. 33s wouldn’t rub much if at all
@@SnowboundCustoms I was planning -10 offset and haven’t decided on wheel spacer yet, I’d really like to clear 35’s what do you think would be the easiest way to do so
@@lizardkidd801 just know that with 35s, chances are you’ll have to bring out the angle grinder lol. It’s almost inevitable