Thank you very very much. I have been looking all over for a video on these very things. I have been watching one in all Spanish. I've even turned on translate...lol.
What number spray tip are you using with the hotline paint? I'm getting hour glassing due to the wrong tip. That's what the Titan factory rep tells me.
Have you run into where you have car stoppers or bumpers and you can’t finish spraying the line because the machine will hit the car stopper? Does the gun arm extend past the front wheel any. Tku. How easy would you say this machine is to use for a first timer and can I spray about 200 lines without it over heating tku
The front wheel does extend a tad bit past front wheel, but sometimes not far enough to stripe entire line. So what you can buy is a 4” stencil or make your own or, tape line and finish with 4” roller by hand, etc. Hope this helps!
Good video- you should actually avoid using a wrench to tighten your tip guard on the gun… if you start doing this you will always have to tighten it with a wrench, it only needs to be hand tight according to Titan
Great vid ,, best tutorial iv seen in awhile
Thanks bro !! Well done
Super super helpful! Got my first job tonight thank you!
Thank you very very much. I have been looking all over for a video on these very things. I have been watching one in all Spanish. I've even turned on translate...lol.
This is a really good video. I hope to see more videos on the titan 850
Great information 👍
Awesome video thank you very much
What number spray tip are you using with the hotline paint?
I'm getting hour glassing due to the wrong tip. That's what the Titan factory rep tells me.
Trying a Graco 421 tomorrow.
What size tip are you using to get that 4 inch line
what do you do with the waste water?
Hey what kind of oil did you used in the little bottle? Also the engine? Where do you buy it?
The little bottle is piston lube buy the Titan brand you can get it on Amazon.
Que presión usa cuando es Latex y cuantos psi de salida
Hi I would like to know how to charge for jobs for parking lot lines, handicap signs .Thanks for your info.
Have you run into where you have car stoppers or bumpers and you can’t finish spraying the line because the machine will hit the car stopper? Does the gun arm extend past the front wheel any. Tku. How easy would you say this machine is to use for a first timer and can I spray about 200 lines without it over heating tku
The front wheel does extend a tad bit past front wheel, but sometimes not far enough to stripe entire line. So what you can buy is a 4” stencil or make your own or, tape line and finish with 4” roller by hand, etc. Hope this helps!
What tip number and orifice size did you use
Good video- you should actually avoid using a wrench to tighten your tip guard on the gun… if you start doing this you will always have to tighten it with a wrench, it only needs to be hand tight according to Titan
Do you have to clean it after every job ?
Yes
Man I have the same machine and I’m having trouble with over spray on asphalt.
Did you fix it? How high is your psi and maybe raise the gun a little if u can
Can you use oil base paints with this one?
No, water base or latex only.
What viscosity engine oil is needed
10-30 is what the manual says , Just Saying